The potential for using walnut (Juglans regia L.) shell as a raw material for wood-based particleboard manufacturing

Composites Part B: Engineering

Volumn 43, Issue 8, 2012, Pages 3276-3280

  Pirayesh, Hamidreza ^a   Khazaeian, Abolghasem ^a   Tabarsa, Taghi ^a  

^a GORGAN UNIVERSITY OF AGRICULTURAL SCIENCES AND NATURAL RESOURCES   (Iran)

Author keywords

A. Resins; A. Wood; B. Chemical properties; B. Mechanical properties

Indexed keywords

ASH CONTENTS; COLD WATERS; EN STANDARDS; FLEXURAL PROPERTIES; GENERAL PURPOSE; HOLOCELLULOSE; INTERNAL BONDS; MODULUS OF RUPTURE; OUTDOOR ENVIRONMENT; PARTICLE CONTENT; PARTICLE RATIOS; THICKNESS SWELLING; UREA FORMALDEHYDE; WALNUT SHELLS; WATER-RESISTANCES; WOOD PARTICLES;

AGRICULTURAL WASTES; BENZENE; BOND STRENGTH (MATERIALS); MANUFACTURE; MECHANICAL PROPERTIES; PARTICLE BOARD; RESINS; SOLUBILITY; UREA FORMALDEHYDE RESINS;

SHELLS (STRUCTURES);

EID: 84866736735     PISSN: 13598368     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.compositesb.2012.02.016     Document Type: Article

References (48)

1. H.A. Alma, H. Kalaycioglu, I. Bektas, and A. Tutus Properties of cotton carpel-based particleboards Ind Crop Prod 22 2 2005 141 149
2. A. Ashori, and Z. Bahreini Evaluation of calotropis gigantea as a promising raw material for fiber-reinforced composite Comp Mater 43 11 2009 1297 1304
3. Aydin I. Effects of some manufacturing conditions on wettability and bonding of veneers obtained from various wood species, Ph.D. Thesis, Black Sea Technical University, Institute of Natural Science, Trabzon, Turkey; 2004. p. 270.
4. N. Ayrilmis, U. Buyuksari, E. Avci, and E. Koc Utilization of pine (Pinus pinea L.) cone in manufacture of wood based composite Forest Ecol Manage 259 2009 65 70
5. N. Ayrilmis, U. Buyuksari, and E. Avci Utilization of waste tire rubber in manufacture of oriented strandboard Waste Manage 29 2009 2553 2557
6. N. Ayrilmis, and J.E. Winandy Effects of post heat-treatment on surface characteristics and adhesive bonding performance of medium density fiberboard Mater Manuf Process 24 2009 594 599
7. J.L. Bowyer, and V.E. Stockman Agricultural residues: an exciting bio-based raw material for the global panel industry For Prod J 51 1 2001 10 21
8. U. Buyuksari, N. Ayrilmis, E. Avci, and E. Koc Evaluation of the physical, mechanical properties and formaldehyde emission of particleboard manufactured from waste stone pine (Pinus pinea L.) cones Bioresour Technol 101 2010 255 259
9. E.M. Ciannamea, P.M. Stefani, and R.A. Ruseckaite Medium-density particleboards from modified rice husks and soybean protein concentrate-based adhesives Bioresour Technol 101 2010 818 825
10. Y. Copur, C. Guler, M. Akgul, and C. Tascioglu Some chemical properties of hazelnut husk and its suitability for particleboard production Build Environ 42 2007 2568 2572
11. Y. Copur, C. Guler, C. Tascioglu, and A. Tozluoglu Incorporation of hazelnut shell and husk in MDF production Bioresour Technol 99 2008 7402 7406
12. C. Guler, Y. Copur, and C. Tascioglu The manufacture of particleboards using mixture of peanut hull (Arachis hypoqaea L.) and European black pine (Pinus nigra Arnold) wood chips Bioresour Technol 99 2008 2893 2897
13. E. Guntekin, and B. Karakus Feasibility of using eggplant stalks (Solanum melongena) in the production of experimental particleboard Ind Crops Prod 27 2008 354 358
14. M. Guru, M. Atar, and R. Yildirim Production of polymer matrix composite particleboard from walnut shell and improvement of its requirements Mater Des 29 2008 284 287
15. J.G. Gwon, S.Y. Lee, S.J. Chun, G.H. Doh, and J.H. Kim Effects of chemical treatments of hybrid fillers on the physical and thermal properties of wood plastic composites Composites: Part A 41 2010 2010 1491 1497
16. A. Ebrahimi, A. Zarei, R. Fatahi, and M. Ghasemi Varnamkhasti Study on some morphological and physical attributes of walnut used in mass models Scientia Horticulturae 121 2009 490 494
17. EN 312. Particleboards-specifications. Brussels (Belgium): European Committee for Standardization; 2005.
18. EN 310. Wood-based panels, determination of modulus of elasticity in bending and bending strength. Brussels (Belgium): European Committee for Standardization; 1993.
19. EN 317. Particleboards and fiberboards, determination of swelling in thickness after immersion. Brussels (Belgium): European Committee for Standardization; 1993.
20. EN 319. Particleboards and fiberboards, determination of tensile strength perpendicular to plane of the board. Brussels (Belgium): European Committee for Standardization; 1993.
21. H. Eroglu Fiberboard industry 1988 Karadeniz Technical University Trabzon p. 210
22. FAOSTAT data; 2010. < http://faostat.fao.org/faostat/ > [accessed 09.10].
23. X. Li, Z. Cai, J.E. Winandy, and A.H. Basta Selected properties of particleboard panels manufactured from rice straws of different geometries Bioresour Technol 101 2010 4662 4666
24. T.M. Malony Modern particleboard and dry-process fiberboard manufacturing 1993 Freeman San Francisco p. 681
25. M.L. Martinez, L. Moiraghi, M. Agnese, and C. Guzman Making and some properties of activated carbon produced from agricultural industrial residues from Argentina J Argentina Chem Soc 91 2003 103 108
26. A.A. Moslemi Particleboard: materials vol. 1 1974 Southern Illinois Uni. Press Carbondale p. 586
27. B. Ndazi, J.V. Tesha, and E.T.N. Nisanda Some opportunities and challenges of producing bio-composites from non-wood residues J Mater Sci 41 2006 6984 6990
28. G. Nemli, and A. Aydin Evaluation of the physical and mechanical properties of particleboard made from the needle litter of Pinus pinaster Ait Ind Crops Prod 26 3 2007 252 258
29. G. Nemli, S. Demirel, E. Gümüokaya, M. Aslan, and C. Acar Feasibility of incorporating waste grass clippings (Lolium perenne L.) in particleboard composites Waste Manage 29 2009 1129 1131
30. G. Nemli, S. Yildiz, and E.D. Gezer The potential for using the needle litter of Scotch pine (Pinus sylvestris L.) as a raw material for particleboard manufacturing Bioresour Technol 99 2008 6054 6058
31. 2 filled rice husk/polypropylene composites: physico-mechanical properties Ind Crops Prod 33 2011 183 187
32. A.N. Papadopoulos, and J.R.B. Hague The potential for using Xax (Linum usitatissimum L.) shiv as a lignocellulosic raw material for particleboard Ind Crop Prod 17 2003 143 147
33. Pirayesh H. Feasibility of producing particleboard from mixture of industrial wood particles/almond and walnut shell. M.S. Thesis 2011. Department of Wood and Paper Technology, Gorgan University of Agricultural Sciences & Natural Resources (GUASNR), Gorgan, Iran.
34. H. Pirayesh, and A. Khazaeian Using almond (Prunus amygdalus L.) shell as a bio-waste resource in wood based composite Composites: Part B 43 3 2012 1475 1479
35. D. Potter, F. Gao, S. Baggetti, J.R. McKenna, and G.H. McGranahan Defining the sources of paradox: DNA sequence markers for North American walnut (Juglans L.) species and hybrids Scientia Horticulturae 94 2002 157 170
36. E. Sjostrom Wood chemistry. Fundamentals and applications 1993 Academic Press San Diego, CA
37. T 204 cm. Solvent extractives of wood and pulp. TAPPI Standards; 1997.
38. T 207 om. Water solubility of wood and pulp. TAPPI Standards; 1999.
39. T 211 om. Ash in wood and pulp. TAPPI Standards; 1993.
40. T 212 om. One percent sodium hydroxide solubility of wood and pulp. TAPPI standards; 1998.
41. T 222 om. Acid-insoluble lignin in wood and pulp. TAPPI Standards; 1998.
42. T 257 cm. Sampling and preparing wood for analysis, TAPPI Standards; 1985.
43. T. Tabarsa, A. Ashori, and M. Gholamzadeh Evaluation of surface roughness and mechanical properties of particleboard panels made from bagasse Composites: Part B 42 5 2011 1330 1335
44. T. Tabarsa, S. Jahanshahi, and A. Ashori Mechanical and physical properties of wheat straw boards bonded with a tannin modified phenol-formaldehyde adhesive Composites: Part B 2010 doi:4110.1016/j. compositesb.2010.09.01
45. L.E. Wise, and H.L. Karl C. Earl Libby, Cellulose and hemicellulose in pulp and paper science and technology vol. 1 1962 Mc Graw Hill Book Co. New York
46. P. Yang, and F. Zhang Study on cure conditions of PMDI-based binder in use of wheat straw particleboard China Adhes 14 2004 37 39
47. H. Yousefi Canola straw as a bio-waste resource for medium density fiberboard (MDF) manufacture Waste Manage 29 2009 2644 2648
48. X. Zhou, C.E. Frazier, and J. Ni Double labeled isocyanate resins for the solid-state NMR detection of urethane linkages to wood Int J Adhes 21 2001 259 264