Fenton pre-treated microfibrillated cellulose evaluated as a strength enhancer in the middle ply of paperboard

Nordic Pulp and Paper Research Journal

Volumn 29, Issue 4, 2014, Pages 732-740

  Hellström, Pia ^a,b   Heijnesson Hultén, Anette ^a   Paulsson, Magnus ^a,c   Håkansson, Helena ^b   Germgård, Ulf ^b  

^a AKZO NOBEL CENTRAL RESEARCH   (Netherlands)

^b KARLSTAD UNIVERSITY   (Sweden)

^c MID SWEDEN UNIVERSITY   (Sweden)

Author keywords

Bending resistance; Bending stiffness index; Dewatering; Enzymatic hydrolysis; Fenton's reagent; Microfibrillated cellulose; Tensile strength; Z directional strength

Indexed keywords

BLEACHING; CELLULOSE; CLEANING; DEWATERING; ENZYMATIC HYDROLYSIS; HYDROGEN PEROXIDE; KRAFT PULP; NANOCELLULOSE; OXIDATION; PAPERBOARDS; PEROXIDES; SILICA; SOLS; STIFFNESS;

BENDING RESISTANCE; BENDING STIFFNESS INDEX; DIRECTIONAL STRENGTH; FENTON'S REAGENTS; MICROFIBRILLATED CELLULOSE;

TENSILE STRENGTH;

CELLULOSE DERIVATIVES; HYDROGEN PEROXIDE; MICROANALYSIS; PAPER BOARDS; PRETREATMENT; STIFFNESS;

EID: 84914818234     PISSN: 02832631     EISSN: 20000669     Source Type: Journal    
DOI: 10.3183/npprj-2014-29-04-p732-740     Document Type: Article

References (44)

1. Aaltio, E. (1962): The effect of highly beaten birch pulp fraction on the properties of kraft paper, Paperi Puu 44(4a), 217-222.
2. Abdul Khalil, H. P. S., Bhat, A. H. and Ireana Yusra, A. F. (2012): Green composites from sustainable cellulose nanofibrils: A review, Carbohydr Polym, 87, (2), 963-979.
3. Afra, E., Yousefi, H., Hadilam, M. M. and Nishino, T. (2013): Comparative effect of mechanical beating and nanofibrillation of cellulose on paper properties made from bagasse and softwood pulps, Carbohydr. Polym. 97(2), 725-730.
4. Ahola, S., Österberg, M. and Laine, J. (2008): Cellulose nanofibrils - adsorption with poly(amideamine) epichlorohydrin studied by QCM-D and application as a paper strength additive, Cellulose 15(2), 303-314.
5. Bhandari, P. N., Jones, D. D. and Hanna, M. A. (2012): Carboxymethylation of cellulose using reactive extrusion, Carbohydr. Polym. 87(3), 2246-2254.
6. Bäckström, M., Kolar, M.-C. and Htun, M. (2008): Charaterisation of fines from unbleached kraft pulps and their impact on sheet properties, Holzforschung 62(5), 546-552.
7. Chinga-Carrasco, G. (2011): Cellulose fibres, nanofibril and microfibrils: The morphological sequence of MFC components from a plant physiology and fibre technology point of view, Nanoscale Res. Lett. 6(417), 1-7.
8. Collin, H., Gregrersen, Ø., Chinga-Carrasco, G. and Eriksen, Ø. (2012): The effect of MFC on the pressability and paper properties of TMP and GCC based sheets, Nord. Pulp Paper Res. J. 27(2), 388-396.
9. Da Silva Perez, D., Tapin-Lingua, S., Lavalette, A., Barbosa, T., Gonzalez, I., Siqueira, G., Bras, J. and Dufresne, A. (2010): Impact of micro/nanofibrillated cellulose preparation on the reinforcement properties of paper and composites films, Int. Conf. Nanotechnol. Forest Prod. Ind., Espoo, Finland, September 26-29, TAPPI Press, Norcross, GA, pp 1-20.
10. Djafari Petroudy, S. R., Syverud, K., Chinga-Carrasco, G., Ghasemain, A. and Resalati, H. (2014): Effects of bagasse microfibrillated cellulose and cationic polyacrylamide on key properties of bagasse paper, Carbohydr. Polym. 99(1), 311-318.
11. Eriksen, Ø., Syverud, K. and Gregersen, Ø. (2008): The use of microfibrillated cellulose produced from kraft pulp as strength enhancer in TMP paper, Nord. Pulp Paper Res. J. 23(3), 299-303.
12. Fredriksson, B. and Höglund, H. (1978): Chemithermo-mechanical pulps in different paper grades, Appita 31(5), 365-370.
13. González, I., Sami, B., Pélach, M. A., Alcalá, M., Vilaseca, F. and Mutjé, P. (2012): Nanofibrillared cellulose as paper additivs in eucalyptus pulps, Bioresourses 7(4), 5167-5180.
14. Heijnesson-Hultén, A. (2005) Method of preparing microfibrillar polysaccharide. WO2007/001 229 A1.
15. Hellström, P., Heijnesson-Hultén, A., Paulsson, M., Ha˚kansson, H., Germga˚rd, U. (2014): The effect of Fenton chemistry on the properties of microfibrillated cellulose, Cellulose, 21,(3), 1489-1503.
16. Henriksson, G., Christiernin, M. and Agnemo, R. (2005): Monocomponent endoglucanase treatment increases the reactivity of softwood sulphite dissolving pulp, J. Ind. Microbiol. Biot. 32(5), 211-214.
17. Henniges, U., Okubayashi, S., Rosenau, T., Potthast, A. (2012): Irradiation of cellulosic pulps: Understanding its impact on cellulose oxidation, Biomacromolecules, 13, (12), 4171-4178.
18. Henriksson, M., Henriksson, G., Berglund, L. A. and Lindström, T. (2007): An environmentally friendly method for enzyme-assisted preparation of microfibrillated cellulose (MFC) nanofibers, Eur. Polym. J. 43(8), 3434-3441.
19. Höglund, H. (2002): Mechanical pulp fibres for new and improved paper grades, 7th Int. Conf. New Available Technol., Stockholm, Sweden, June 4-6, SPCI, Stockholm, Sweden, pp. 158-163.
20. Isogai, A. and Kato, Y. (1998): Preparation of polyuronic acid from cellulose by TEMPO-mediated oxidation, Cellulose 5(3), 153-164.
21. Isogai, A., Saito, T. and Fukuzumi, H. (2011): TEMPO-oxidized cellulose nanofibers, Nanoscale 3(1), 71-85.
22. Iwamoto, S., Kai, W., Isogai, T., Saito, T., Isogai, A. and Iwata, T. (2010): Comparison study of TEMPO-analogous compounds on oxidation efficiency of wood cellulose for preparation of cellulose nanofibrils, Polym. Degrad. Stabil. 95(8), 1394-1398.
23. Joseleau, J.-P., Chevalier-Billosta, V. and Ruel, K. (2012): Interaction between microfibrillar cellulose fines and fibers: influence on pulp qualities and paper sheet properties, Cellulose 19(3), 1-9.
24. Kajanto, I. and Kosonen, M. (2012): The potential use of micro- and nano-fibrillated cellulose as reinforcing element in paper, J-FOR 2(6), 42-48.
25. Klinga, N., Sandberg, C. and Höglund, H. (2005) Sheet properties of high yield pulps related to different pressing and drying conditions, Int. Mech. Pulp. Conf., Oslo, Norway, June 7-9, Papperindustriens Tekniske Forening, Oslo, Norway, pp. 344-348.
26. Klinga, N., Höglund, H. and Sandberg, C. (2008): Energy efficient high quality CTMP for paperboard, J. Pulp Paper Sci. 34(2), 98-106.
27. Lavoine, N., Desloges, I., Dufresne, A. and Bras, J. (2012): Microfibrillated cellulose - Its barrier properties and applications in cellulosic materials: A review, Carbohydr. Polym. 90(2), 735-764.
28. Mörseburg, K. and Chinga-Carrasco, G. (2009): Assessing the combined benefits of clay and nanofibrillated cellulose in layered TMP-based sheets, Cellulose 16(5), 795-806.
29. Osong, S. H., Norgren, S., Per, E. (2014): Paper strength improvement by inclusin of nano-ligno-cellulose to Chemitermomechanical pulp, Nordic Pulp and Paper Research Journal, 29,(2), 309-316.
30. Pouyet, F., Chirat, C., Potthast, A., Lachenal, D. (2014): Formation of carbonyl groups on cellulose during ozone treatment of pulp: Consequences for pulp bleaching, Carbohydr Polym, 109, (0), 85-91.
31. Pynnönen, T., Paltakari J. and Paulapurp, H. (2005) Improving the strength properties of high-temperature TMP and CTMP by adding fines, Int. Mech. Pulp. Conf., Oslo, Norway, June 7-9, Papperindustriens Tekniske Forening, Oslo, Norway, pp. 274-277.
32. Pääkkö, M., Ankerfors, M., Kosonen, H., Nykänen, A., Ahola, S., Österberg, M., Ruokolainen, J., Laine, J., Larsson, P. T., Ikkala, O. and Lindström, T. (2007): Enzymatic hydrolysis combined with mechanical shearing and high-pressure homogenization for nanoscale cellulose fibrils and strong gels, Biomacromolecules 8(6), 1934-1941.
33. Retulainen, E., Moss, P. and Nieminen, K. (1993): Effect of fines on the properties of fibre networks, Products of Papermaking - 10th Fund. Res. Symp., Oxford, UK, September 20-24, Pira International, Leatherhead, UK, vol. 2, pp. 727-769.
34. Retulainen, E. and Nieminen, K. (1996): Fibre properties as control variables in papermaking? Part 2. Strengthening interfibre bonds and reducing grammage Paperi Puu 78(5), 305-312.
35. Rojas, J. and Hubbe, B. (2004): The dispersong science of papermaking, J. Disper. Sci. Technol. 25(6), 713-732.
36. Rundlöf, M. (2002): Interaction of dissolved and colloidal substances with fines of mechanical pulp - Influence on sheet properties and basic aspects of adhesion, PhD Thesis, Royal Institute of Technology, Stockholm, Sweden.
37. Sandquist, D. (2013): New horizons for microfibrillated cellulose, Appita J. 66(2), 156-162.
38. Syverud, K., Stenius, P. (2009): Strength and barrier properties of MFC films, Cellulose, 16,(1), 75-85.
39. Taipale, T., Österberg, M., Nykänen, A., Ruokolainen J. and Laine, J. (2010): Effect of microfibrillated cellulose and fines on the drainage of kraft pulp suspension and paper strength, Cellulose 17(5), 1005-1020.
40. Tapin-Lingua, S., Meyer, V., Petit-Conil, M. J. (2013): Correlations between pulp composition and efficiency of M/NFC production. Tappi International Conference on Nano Technology for renewable Materials, Royal Institute of Technology, 24-27 June, 2013, pp, Stocjholm, Sweden.
41. Turbak, A. F., Snyder, F. W., Sandberg, K. R. (1983): Microfibrillated cellulose, a new cellulose product: Properties, uses, and commercial potential J Appl Polym Sci, Appl Polym Symp 37, 815-827.
42. Zhang, K., Fischer, S., Geissler, A. and Brendler, E. (2012): Analysis of carboxylate groups in oxidized never-dried cellulose II catalyzed by TEMPO and 4-acetamide-TEMPO, Carbohydr. Polym. 87(1), 894-900.
43. Zimmermann, T., Bordeanu, N., Strub, E. (2010): Properties of nanofibrillated cellulose from different raw materials and its reinforcement potential, Carbohydr Polym, 79,(4), 1086-1093.
44. Österberg, M. and Cranston, E. D. (2014): Special issue on nanocellulose - Editorial, Nord. Pulp Paper Res. J. 29(1), 2-3.