The rogowski coil principles and applications: A review

IEEE Sensors Journal

Volumn 15, Issue 2, 2015, Pages 651-658

  Samimi, Mohammad Hamed ^a   Mahari, Arash ^a   Farahnakian, Mohammad Ali ^b   Mohseni, Hossein ^a  

^a UNIVERSITY OF TEHRAN   (Iran)

^b Iran Power Generation Distribution and Transmission Management Company   (Iran)

Author keywords

High speed current measurement; Lumped and distributed model; Review; Rogowski coil; Specific applications

Indexed keywords

ELECTRIC TRANSFORMERS; REVIEWS;

DAMPING RESISTORS; EXPERIMENTAL METHODS; INTEGRATION TECHNIQUES; LUMPED AND DISTRIBUTED MODELS; NEW APPLICATIONS; OUTPUT STAGES; PARAMETER MEASUREMENT; ROGOWSKI COIL;

ELECTRIC CURRENT MEASUREMENT;

EID: 84913582847     PISSN: 1530437X     EISSN: None     Source Type: Journal    
DOI: 10.1109/JSEN.2014.2362940     Document Type: Review

References (54)

1. M. Marracci, B. Tellini, C. Zappacosta, and G. Robles, "Critical parameters for mutual inductance between Rogowski coil and primary conductor," IEEE Trans. Instrum. Meas., vol. 60, no. 2, pp. 625-632, Feb. 2011
2. Y. Li, Y. Guo, Y. Long, C. Yao, Y. Mi, and J. Wu, "Novel lightning current sensor based on Printed Circuit Board Rogowski coil," in Proc. Int. Conf. High Voltage Eng. Appl. (ICHVE), Sep. 2012, pp. 334-338
3. C. Xianghu, Z. Xiangjun, D. Feng, and L. Ling, "Novel PCB sensor based on Rogowski coil for transmission lines fault detection," in Proc. IEEE Power Energy Soc. General Meeting (PES), Jul. 2009, pp. 1-4
4. M. Rigoni, J. S. D. Garcia, A. P. Garcia, P. A. da Silva, N. J. Batistela, and P. Kuo-Peng, "Rogowski coil current meters," IEEE Potentials, vol. 27, no. 4, pp. 40-45, Jul./Aug. 2008
5. W. Rogowski and W. Steinhaus, "Die messung der magnetischen spannung," Elect. Eng., vol. 1, no. 4, pp. 141-150, 1912
6. C. Qing, L. Hong-Bin, Z. Ming-Ming, and L. Yan-Bin, "Design and characteristics of two Rogowski coils based on printed circuit board," IEEE Trans. Instrum. Meas., vol. 55, no. 3, pp. 939-943, Jun. 2006
7. J. P. Dupraz, A. Fanget, W. Grieshaber, and G. F. Montillet, "Rogowski coil: Exceptional current measurement tool for almost any application," in Proc. IEEE Power Eng. Soc. General Meeting, Jun. 2007, pp. 1-8
8. L. Kojovic, "PCB Rogowski coils benefit relay protection," IEEE Comput. Appl. Power, vol. 15, no. 3, pp. 50-53, Jul. 2002
9. S. Richards, D. Chatrefou, D. Tholomier, and F. Gilles, "Nonconventional instrument transformer solutions-Experience of the process bus IEC 61850-9.2," in Proc. 9th Int. Conf. Develop. Power Syst. Protection, Mar. 2008, pp. 9-13
10. A. M. Luciano and M. Savastano, "Wide band transformer based on a split-conductor current sensor and a Rogowski coil for high current measurement," in Proc. Integr. Intell. Instrum. Control., IEEE Instrum. Meas. Technol. Conf. (IMTC), Apr. 1995, p. 454
11. D. Gerber, T. Guillod, and J. Biela, "IGBT gate-drive with PCB Rogowski coil for improved short circuit detection and current turnoff capability," in Proc. IEEE Pulsed Power Conf. (PPC), Jun. 2011, pp. 1359-1364
12. K. Yamamoto, N. Ueda, A. Ametani, and D. Natsuno, "A study of lightning current distribution at a wind turbine foot: Influence on current measurements using a Rogowski coil," Elect. Eng. Jpn., vol. 180, no. 4, pp. 10-17, 2012
13. I. Metwally, "Self-integrating Rogowski coil for high-impulse current measurement," IEEE Trans. Instrum. Meas., vol. 59, no. 2, pp. 353-360, Feb. 2010
14. W. Li, C. Mao, and J. Lu, "Study of the virtual instrumentation applied to measure pulsed heavy currents," IEEE Trans. Instrum. Meas., vol. 54, no. 1, pp. 284-288, Feb. 2005
15. H. Bluhm, Pulsed Power Systems. New York, NY, USA: Springer, 2006
16. M. Chiampi, G. Crotti, and A. Morando, "Evaluation of flexible Rogowski coil performances in power frequency applications," IEEE Trans. Instrum. Meas., vol. 60, no. 3, pp. 854-862, Mar. 2011
17. L. A. Kojovic, "Applications of Rogowski coils for advanced power system solutions," in Proc. 18th Int. Conf. Exhibit. Electr. Distrib. (CIRED), Jun. 2005, pp. 1-4
18. W.-Z. Zhou, G.-S. Zhao, and H.-Y. Li, "Error analysis and improved method of Rogowski coil," Power Syst. Protection Control, vol. 20, no. 37, pp. 99-103, 2009
19. M. Shafiq, L. Kutt, M. Lehtonen, T. Nieminen, and M. Hashmi, "Parameters identification and modeling of high-frequency current transducer for partial discharge measurements," IEEE Sensors J., vol. 13, no. 3, pp. 1081-1091, Mar. 2013
20. E. Hemmati and S. M. Shahrtash, "Digital compensation of Rogowski coil's output voltage," IEEE Trans. Instrum. Meas., vol. 62, no. 1, pp. 71-82, Jan. 2013
21. A. Marinescu and I. Dumbrava, "Validation of the software for digital processing of a Rogowski coil output signal," in Proc. 13th Int. Conf. Optim. Elect. Electron. Equip. (OPTIM), May 2012, pp. 1189-1192
22. J. A. J. Pettinga and J. Siersema, "A polyphase 500 kA current measuring system with Rogowski coils," Proc. IEE B Electr. Power Appl., vol. 130, no. 5, pp. 360-363, Sep. 1983
23. X. Minjiang, G. Houlei, Z. Baoguang, W. Chengzhang, and T. Chun, "Analysis on transfer characteristics of Rogowski coil transducer to travelling wave," in Proc. Int. Conf. Adv. Power Syst. Autom. Protection (APAP), vol. 2, Oct. 2011, pp. 1056-1059
24. S. Wang, X. Cao, and L. Chen, "Study of ECT based on Rogowski coil used in smart substation," in Proc. IEEE 7th Int. Power Eng. Optim. Conf. (PEOCO), Jun. 2013, pp. 61-65
25. Y. Liu, F. Lin, Q. Zhang, and H. Zhong, "Design and construction of a Rogowski coil for measuring wide pulsed current," IEEE Sensors J., vol. 11, no. 1, pp. 123-130, Jan. 2011
26. G. M. Hashmi, M. Lehtonen, and A. Elhaffar, "Modeling of Rogowski coil for on-line PD monitoring in covered-conductor overhead distribution networks," in Proc. 19th Int. Conf. Electr. Distrib. (CIRED), Vienna, vol. 1. May 21-24, 2007
27. G. M. Hashmi, M. Lehtonen, and M. Nordman, "Calibration of on-line partial discharge measuring system using Rogowski coil in coveredconductor overhead distribution networks," IET Sci., Meas. Technol., vol. 5, no. 1, pp. 5-13, Jan. 2011
28. T. Guillod, D. Gerber, J. Biela, and A. Muesing, "Design of a PCB Rogowski coil based on the PEEC method," in Proc. 7th Int. Conf. Integr. Power Electron. Syst. (CIPS), Mar. 2012, pp. 1-6
29. A. Marinescu, "A calibration laboratory for Rogowski coil used in energy systems and power electronics," in Proc. 12th Int. Conf. Optim. Elect. Electron. Equip. (OPTIM), May 2010, pp. 913-919
30. J. D. Ramboz, "Machinable Rogowski coil, design, and calibration," IEEE Trans. Instrum. Meas., vol. 45, no. 2, pp. 511-515, Apr. 1996
31. V. Dubickas and H. Edin, "High-frequency model of the Rogowski coil with a small number of turns," IEEE Trans. Instrum. Meas., vol. 56, no. 6, pp. 2284-2288, Dec. 2007
32. E. Hemmati and S. M. Shahrtash, "Evaluation of unshielded Rogowski coil for measuring partial discharge signals," in Proc. 11th Int. Conf. Environ. Elect. Eng. (EEEIC), May 2012, pp. 434-439
33. L. Ferkovic, D. Ilic, and R. Malaríc, "Mutual inductance of a precise Rogowski coil in Dependence of the position of primary conductor," IEEE Trans. Instrum. Meas., vol. 58, no. 1, pp. 122-128, Jan. 2009
34. Y. Zhang, J. Liu, G. Bai, and J. Feng, "Analysis of damping resistor's effects on pulse response of self-integrating Rogowski coil with magnetic core," Measurement, vol. 45, no. 5, pp. 1277-1285, 2012
35. O. Poncelas, J. A. Rosero, J. Cusido, J. A. Ortega, and L. Romeral, "Motor fault detection using a Rogowski sensor without an integrator," IEEE Trans. Ind. Electron., vol. 56, no. 10, pp. 4062-4070, Oct. 2009
36. Y. Hongwei, Y. Dahai, Y. Xianggen, and L. Weibo, "Study of a novel CT for short-circuited current measurement," in Proc. IEEE/PES Transmiss. Distrib. Conf. Exhibit., Asia Pacific, Aug. 15-18, 2005, pp. 1-5
37. E. Suomalainen and J. Hallstrom, "On-site calibration of a current transformer using a Rogowski coil," IEEE Trans. Instrum. Meas., vol. 58, no. 4, pp. 1054-1058, Apr. 2009
38. IEEE Guide for the Application of Rogowski Coils Used for Protective Relaying Purposes, IEEE Standard C37.235-2007, Feb. 2008
39. T. Eriksson, J. Blomgren, and D. Winkler, "An HTS SQUID picovoltmeter used as preamplifier for Rogowski coil sensors," Phys. C, Supercond., vol. 368, nos. 1-4, pp. 130-133, 2002
40. R. D. Garzon, High Voltage Circuit Breakers: Design and Applications. Boca Raton, FL, USA: CRC Press, 2002
41. D. Bortis, J. Biela, and J. W. Kolar, "Active gate control for current balancing of parallel-connected IGBT modules in solid-state modulators," IEEE Trans. Plasma Sci., vol. 36, no. 5, pp. 2632-2637, Oct. 2008
42. R. O. De Alessandro, M. D. V. Ibarra, and H. H. Brito, "Design of a current measurement system in a plasma thruster with Rogowski coil," IEEE Latin Amer. Trans., vol. 11, no. 1, pp. 119-125, Feb. 2013
43. C. Qing, L. Hong-Bin, H. Ben-Xiong, and D. Qiao-Qi, "Rogowski sensor for plasma current measurement in J-TEXT," IEEE Sensors J., vol. 9, no. 3, pp. 293-296, Mar. 2009
44. N. R. Prakash, K. Flora, R. Babu, R. Gangradey, and H. K. Patel, "Design and development of Rogowski coil sensors for eddy currents measurement on toroidal vessel," J. Fusion Energy, vol. 32, no. 2, pp. 263-267, 2013
45. J. Zhu, L. Yang, J. Jia, and Q. Zhang, "The design of Rogowski coil with wide band using for partial discharge measurements," in Proc. Int. Symp. Elect. Insul. Mater. (ISEIM), vol. 2, Jun. 2005, pp. 518-521
46. J. Kuffel, E. Kuffel, and W. S. Zaengl, High Voltage Engineering Fundamentals. Burlington, MA, USA: Newnes, 2000
47. Z. S. Zhang, D. M. Xiao, and Y. Li, "Rogowski air coil sensor technique for on-line partial discharge measurement of power cables," IET Sci., Meas. Technol., vol. 3, no. 3, pp. 187-196, May 2009
48. P. van Der Wielen, J. Veen, P. A. A. F. Wouters, and E. F. Steennis, "Sensors for on-line PD detection in MV power cables and their locations in substations," in Proc. 7th Int. Conf. Properties Appl. Dielectr. Mater., vol. 1, Jun. 2003, pp. 215-219
49. L. A. Kojovic, V. Skendzic, and S. E. Williams, "High precision Rogowski coil," U.S. Patent 6 313 623, Nov. 6, 2001
50. T. Tao, Z. Zhihua, P. Qijun, T. Jian, and Z. Yuanfeng, "Design of PCB Rogowski coil and analysis of anti-interference," Trans. China Electrotech. Soc., vol. 26, no. 9, pp. 130-137, 2011
51. T. Tao, Z. Zhao, W. Ma, and Q. Pan, "Precise mutual-inductance analysis of a novel clasp Rogowski coil with symmetrical double-printed imprints," in Proc. 6th Int. Conf. Electromagn. Field Problems Appl. (ICEF), Jun. 2012, pp. 1-4
52. A. C. Britten et al., "Methods for measuring the earth resistance of transmission towers equipped with earth wires," Cigre Working Group, Paris, France, Tech. Rep. C4.2.02-2005, Jun. 2005, pp. c1-45
53. W. Yutian, Y. Jing, W. Huixin, and L. Jie, "Design and research of fiber optically powered Rogowski coil current transformer," Proc. Eng., vol. 15, pp. 886-890, Dec. 2011
54. P. Orr et al., "An optically-interrogated Rogowski coil for passive, multiplexable current measurement," IEEE Sensors J., vol. 13, no. 6, pp. 2053-2054, Jun. 2013