Parameters identification and modeling of high-frequency current transducer for partial discharge measurements

IEEE Sensors Journal

Volumn 13, Issue 3, 2013, Pages 1081-1091

  Shafiq, Muhammad ^a   Kutt, Lauri ^b   Lehtonen, Matti ^a   Nieminen, Tatu ^a   Hashmi, Murtaza ^c  

^a AALTO UNIVERSITY   (Finland)

^b TALLINN UNIVERSITY OF TECHNOLOGY   (Estonia)

^c VTT TECHNICAL RESEARCH CENTRE OF FINLAND   (Finland)

Author keywords

Alternative Transient Program Electromagnetic Transient Program (ATP EMTP); calibration; current sensor; damping; data acquisition; integration; oscillations; partial discharge; resonance; Rogowski coil

Indexed keywords

AIR-CORED; ATP-EMTP; COMPLEX DESIGNS; CURRENT PULSE; CURRENT SENSORS; HIGH FREQUENCY HF; HIGH-FREQUENCY CURRENT; HIGH-FREQUENCY CURRENT TRANSFORMERS; INDUCTION SENSORS; LUMPED PARAMETER MODELS; NON-INTRUSIVE; NUMERICAL INTEGRATIONS; OSCILLATIONS; PARAMETERS IDENTIFICATION; PARTIAL DISCHARGE MEASUREMENTS; ROGOWSKI COIL;

CALIBRATION; CONDITION MONITORING; DAMPING; DATA ACQUISITION; ELECTRIC SURGES; ELECTRIC TRANSFORMERS; INTEGRATION; PARTIAL DISCHARGES; RESONANCE; SENSORS;

POWER QUALITY;

EID: 84873380362     PISSN: 1530437X     EISSN: None     Source Type: Journal    
DOI: 10.1109/JSEN.2012.2227712     Document Type: Article

References (26)

1. C. Xiao, L. Zhao, T. Asada, W. G. Odendaal, and J. D. V. Wyk, "An overview of integratable current sensor technologies," in Proc. 38th IAS Annu. Meeting Ind. Appl. Conf., Oct. 2003, pp. 1251-1258.
2. D. A. Ward, J. La, and T. Exon, "Using Rogowski coil for transient current measurements," Eng. Sci. Educ. J., vol. 2, no. 3, pp. 105-113, 1993.
3. C. R. Hewson, W. F. Ray, and R. M. Davis, "Verification of Rogowski current transducer's ability to measure fast switching transients," in Proc. 21st Annu. IEEE Appl. Power Electron. Conf. Exposit., Mar. 2006, pp. 1-8.
4. P. Mahonen, T. Moisio, M. Hakola, and H. Kuisti, "The Rogowski coil and the voltage divider in power system protection and monitoring," in Proc. Center Int. Cooperat. Edu. Develop. Conf., 2000, pp. 1-6.
5. G. Robles, M. Argueso, J. Sanz, R. Giannetti, and B. Tellini, "Identification of parameters in a Rogowski coil used for the measurement of partial discharges," in Proc. IEEE Instrum. Meas. Technol. Conf., May 2007, pp. 1-4.
6. G. M. Hashmi, M. Lehtonen, and M. Nordman, "Modeling and experimental verification of online PD detection in MV covered-conductor overhead networks," IEEE Trans. Dielectr. Electr. Insul., vol. 17, no. 1, pp. 169-180, Feb. 2010.
7. R. Prochazka, K. Draxler, and V. Kvasnicka, "The Rogowski coil software," in Proc. 16th Symp. Explor. New Front. Instrum. Methods Electr. Electron. Meas. Conf., Sep. 2008, pp. 1-8.
8. D. W. Knight. (2010). The Self-Resonance and Self-Capacitance of Solenoid Coils [Online]. Available: http://www.g3ynh.info/zdocs/magnetics/appendix/self- res/self-res.pdf
9. W. F. Ray and R. M. Davis, "High frequency improvements in wide bandwidth Rogowski transducers," in Proc. Eur. Conf. Power Electron. Appl. Conf., 1999, pp. 1-9.
10. I. A. Metwally, "Self-integrating Rogowski coil for high-impulse current measurement," IEEE Trans. Instrum. Meas., vol. 59, no. 2, pp. 353-360, Feb. 2010.
11. M. Faifer and R. Ottoboni, "An electronic current transformer based on Rogowski coil," in Proc. IEEE Int. Instrum. Meas. Technol. Conf., May 2008, pp. 1554-1559.
12. J. D. Ramboz, "Machinable Rogowski coil, design and calibration," IEEE Trans. Instrum. Meas., vol. 45, no. 2, pp. 511-515, Apr. 1996. (Pubitemid 126781506)
13. Y. Tang, H. Chen, H. Wang, F. Dai, and S. Jiang, "Transmission line models used in travelling wave studies," in Proc. IEEE Transmiss. Distrib. Conf., Apr. 1999, pp. 797-803.
14. S. Ma, B. Xu, Z. Bo, and A. Klimek, "The research on lumped parameter equivalent circuit of transmission line," in Proc. 8th Int., Adv. Power Syst. Control, Oper. Manage. Conf., 2009, pp. 1-5.
15. L. Kütt, M. Shafiq, J. Järvik, M. Lehtonen, and J. Kilter, "Air-core inductive current sensor for fast transients measurements in distribution networks," in Proc. 8th IEEE Electr. Power Qual. Supply Rel. Conf. 2012, pp. 1-4.
16. P. N. Murgatroyd and D. N. Woodland, "Geometrical properties of Rogowski sensors," in Proc. IEEE Colloq. Low Freq. Power Meas. Anal. Conf., Nov. 2002, pp. 901-910.
17. M. Hashmi, M. Lehtonen, and M. Nordman, "Calibration of on-line partial discharge measuring system using Rogowski coil in coveredconductor overhead distribution networks," IET Sci., Meas. Technol., vol. 5, no. 1, pp. 5-13, Jan. 2011.
18. L. Kütt and M. Shafiq, "Magnetic sensor coil shape geometry and bandwidth assessment," in Proc. 7th IEEE Int. Conf. Workshop Compat., Jun. 2011, pp. 470-473.
19. Diagnosis Monitoring Quality Control Research and Development by Power Diagnostix Systems GmbH. (2012) [Online]. Available: http://www.pd-systems.com/
20. B. Wang, D. Wang, and W. Wu, "A Rogowski coil current transducer designed for wide bandwidth current pulse measurement," in Proc. IEEE 6th Int. Power Electr. Motion Control Conf., May 2009, pp. 1246-1249.
21. S. A. Boggs, "Partial discharge-III cavity induced PD in solid dielectrics," IEEE Electr. Insul. Mag., vol. 6, no. 6, pp. 11-16, Dec. 1990.
22. G. M. Hashmi, R. Papazyan, and M. Lehtonen, "Determining wave propagation characteristics of MV XLPE power cable using time domain reflectometry," Technol. Turkish J. Electr. Eng. Comput. Sci., vol. 19, no. 2, pp. 207-219, 2011.
23. C. Menguy, P. Guerin, B. Fallou, and D. Fortune, "Partial discharge energy measurements on insulation systems and equipments," in Proc. IEEE Int. Electr. Insul. Conf., Jun. 1988, pp. 258-261.
24. L. D. Slifka, "An accelerometer based approach to measuring displacement of a vehicle body," M.S. thesis, Dept. Electr. Comput. Eng., University of Michigan, Dearborn, 2004.
25. M. Argueso, G. Robles, and J. Sanz, "Implementation of a Rogowski coil for the measurement of partial discharges," Rev. Sci. Instrum., vol. 76, no. 6, pp. 1-7, 2005. (Pubitemid 40834086)
26. M. Isa, N. I. Elkalashy, N. Tarhuni, G. M. Hashmi, and M. Lehtonen, "Experimental evaluation of Rogowski coil performance for locating PD in energized overhead covered-conductor feeder," in Proc. 14th Int. Middle East Power Syst. Conf., 2010, pp. 1-6.