The effect of surface modification on the retention strength of polyetheretherketone crowns adhesively bonded to dentin abutments

Journal of Prosthetic Dentistry

Volumn 112, Issue 6, 2014, Pages 1489-1497

  Uhrenbacher, Julia ^a   Schmidlin, Patrick R ^b   Keul, Christine ^a   Eichberger, Marlis ^a   Roos, Malgorzata ^c   Gernet, Wolfgang ^a   Stawarczyk, Bogna ^a  

^a UNIVERSITY OF MUNICH   (Germany)

^b UNIVERSITY OF ZURICH   (Switzerland)

^c UNIVERSITY OF ZURICH   (Switzerland)

Author keywords

[No Author keywords available]

Indexed keywords

ALUMINUM OXIDE; DENTAL MATERIAL; KETONE; MACROGOL DERIVATIVE; METHACRYLIC ACID METHYL ESTER; POLYETHERETHERKETONE; RELY X UNICEM; RESIN CEMENT; SULFURIC ACID; WATER;

CEMENTATION; CHEMISTRY; DENTAL ABUTMENT; DENTAL ACID ETCHING; DENTAL BONDING; DENTAL ETCHING; DENTAL PROCEDURE; DENTAL SURGERY; DENTIN; DEVICES; HUMAN; POLYMERIZATION; PROCEDURES; SURFACE PROPERTY; TEMPERATURE; TIME FACTOR; TOOTH CROWN; TOOTH PROSTHESIS; ULTRASTRUCTURE;

ACID ETCHING, DENTAL; ALUMINUM OXIDE; CEMENTATION; CROWNS; DENTAL ABUTMENTS; DENTAL BONDING; DENTAL ETCHING; DENTAL MATERIALS; DENTAL PROSTHESIS RETENTION; DENTAL RESTORATION FAILURE; DENTAL STRESS ANALYSIS; DENTIN; HUMANS; KETONES; METHYLMETHACRYLATES; POLYETHYLENE GLYCOLS; POLYMERIZATION; RESIN CEMENTS; SULFURIC ACIDS; SURFACE PROPERTIES; TEMPERATURE; TIME FACTORS; WATER;

EID: 84912117340     PISSN: 00223913     EISSN: 10976841     Source Type: Journal    
DOI: 10.1016/j.prosdent.2014.05.010     Document Type: Article

References (23)

1. P.R. Schmidlin, B. Stawarczyk, M. Wieland, T. Attin, C.H. Hämmerle, and J. Fischer Effect of different surface pretreatment and luting materials on shear bond strength to PEEK Dent Mater 26 2010 553 559
2. B. Stawarczyk, F. Beuer, T. Wimmer, D. Jahn, B. Sener, and M. Roos Polyetheretherketone: a suitable material for fixed dental prostheses? J Biomed Mater Res B Appl Biomater 101 2013 1209 1216
3. O. Sproesser, P.R. Schmidlin, J. Uhrenbacher, M. Roos, W. Gernet, and B. Stawarczyk Impact of sulfuric acid etching duration of PEEK on the shear bond strength to different resin composite J Adhes Dent 2013 In press
4. B. Stawarczyk, C. Keul, F. Beuer, M. Roos, and P.R. Schmidlin Tensile bond strength of veneering resins to PEEK: impact of different adhesives Dent Mater J 32 2013 441 448
5. L. Hallmann, A. Mehl, N. Sereno, and C. Hämmerle The improvement of adhesive properties of PEEK through different pretreatments Appl Surf Sci 258 2012 7213 7218
6. B. Stawarczyk, N. Bähr, F. Beuer, T. Wimmer, M. Eichberger, and W. Gernet Influence of plasma on shear bond strength of self-adhesive resin cements to polyetheretherketone Clin Oral Investig 18 2014 163 170
7. C. Keul, A. Liebermann, P.R. Schmidlin, M. Roos, B. Sener, and B. Stawarczyk Influence of PEEK surface modification on the retention of two veneering resin composites J Adhes Dent 2013 In press
8. M. Kern, and F. Lehmann Influence of surface conditioning on bonding to polyetheretherketon (PEEK) Dent Mater 28 2012 1280 1283
9. B. Ersu, B. Yuzugullu, A. Ruya Yazici, and S. Canay Surface roughness and bond strengths of glass-infiltrated alumina-ceramics prepared using various surface treatments J Dent 37 2009 848 856
10. S.J. Marshall, S.C. Bayne, R. Baier, A.P. Tomsia, and G.W. Marshall A review of adhesion science Dent Mater 26 2010 e11 e16
11. G. Oilo Bond strength testing: what does it mean Int Dent J 43 1993 492 498
12. D.S. Palmer, M.T. Barco, and E.J. Billy Temperature extremes produced orally by hot and cold liquids J Prosthet Dent 67 1992 325 327
13. R.F. Boehm Thermal environment of teeth during open mouth respiration J Dent Res 51 1972 75 78
14. M.S. Gale, and B.W. Dervell Thermal cycling process for laboratory testing of dental restorations J Dent 27 1999 89 99
15. A. Piwowarczyk, H.C. Lauer, and J.A. Sorensen In vitro shear bond strength of cementing agents to fixed prosthodontic restorative materials J Prosthet Dent 92 2004 265 273
16. T. Nakamura, K. Wakabayashi, S. Kinuta, H. Nishida, M. Miyamae, and H. Yatani Mechanical properties of new self-adhesive resin-based cement J Prosthodont Res 54 2010 59 64
17. B. Torstenson, and M. Brannstrom Contraction gap under composite resin restorations: effect of hygroscopic expansion and thermal stress Oper Dent 13 1988 24 31
18. B. Stawarczyk, T. Basler, A. Ender, M. Roos, M. Özcan, and C. Hämmerle Effect of surface conditioning with airborne-particle abrasion on the tensile strength of polymeric CAD/CAM crowns luted with self-adhesive and conventional resin cements J Prosthet Dent 107 2012 94 101
19. C.P. Ernst, U. Cohnen, E. Stender, and B. Willershausen In vitro retentive strength of zirconium oxide ceramic crowns using different luting agents J Prosthet Dent 93 2005 551 558
20. B. Stawarczyk, L. Hartmann, R. Hartmann, M. Roos, A. Ender, and M. Özcan Impact of Gluma Desensitizer on the tensile strength of zirconia crowns: an in-vitro study Clin Oral Investig 16 2012 201 213
21. C.P. Ernst, N. Wenzl, E. Stender, and B. Willershausen Retentive strengths of cast gold crowns using glass ionomer, compomer, or resin cement J Prosthet Dent 79 1998 472 476
22. N.H. Yim, F.A. Rueggeberg, W.F. Caughman, F.M. Gardner, and D.H. Pashley Effect of dentin desensitizers and cementing agents on retention of full crowns using standardized crown preparations J Prosthet Dent 83 2000 459 465
23. R.P. Palacios, G.H. Johnson, K.M. Phillips, and A.J. Raigrodski Retention of zirconium oxide ceramic crowns with three types of cement J Prosthet Dent 96 2006 104 114