TEM study of microstructural development during heating in a nanolaminated amorphous ZrAlCuFe/crystalline CuCoFeNi composite structure

Journal of Alloys and Compounds

Volumn 619, Issue , 2015, Pages 417-429

  Romankov, S ^a   Park, Y C ^b  

^a Chonbuk National University   (South Korea)

^b National Nano Fab Center (NNFC)   (South Korea)

Author keywords

Composite materials; Crystal structure; Microstructure; Nanostructured materials; Phase transitions; Transition metal alloys and compounds

Indexed keywords

ALUMINUM ALLOYS; BINARY ALLOYS; COBALT ALLOYS; COMPLEX NETWORKS; COMPOSITE MATERIALS; COPPER; COPPER ALLOYS; COPPER PLATING; CRYSTALLINE MATERIALS; GLASS CERAMICS; GRAIN BOUNDARIES; IRON ALLOYS; MICROSTRUCTURE; NANOSTRUCTURED MATERIALS; PHASE TRANSITIONS; PLATES (STRUCTURAL COMPONENTS); ZIRCALOY; ZIRCONIUM COMPOUNDS;

BODY CENTERED CUBIC (BCC) CRYSTAL; CRYSTALLINE LAMELLA; FACE-CENTERED CUBIC; MICROSTRUCTURAL DEVELOPMENT; MICROSTRUCTURAL TRANSFORMATIONS; NANO-COMPOSITE STRUCTURE; POLYCRYSTALLINE GRAINS; TRANSITION METAL ALLOYS AND COMPOUNDS;

CRYSTAL STRUCTURE;

EID: 84907587060     PISSN: 09258388     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.jallcom.2014.08.256     Document Type: Article

References (41)

1. M.F. Ashby, and Y.J.M. Brechet Designing hybrid materials Acta Mater. 51 2003 5801 5821
2. S. Torquato, S. Hyun, and A. Donev Optimal design of manufacturable three-dimensional composites with multifunctional characteristics J. Appl. Phys. 94 2003 5748 5755
3. M. Ashby Designing architectured materials Scr. Mater. 68 2013 4 7
4. H. Gleiter Nanocrystalline materials Prog. Mater. Sci. 33 1989 223 315
5. R.Z. Valiev, R.K. Islamgaliev, and I.V. Alexandrov Bulk nanostructured materials from severe plastic deformation Prog. Mater. Sci. 45 2000 103 189
6. Y. Estrin, and A. Vinogradov Extreme grain refinement by severe plastic deformation: a wealth of challenging science Acta Mater. 61 2013 782 817
7. R. Kirchheim Grain coarsening inhibited by solute segregation Acta Mater. 50 2002 413 419
8. P.C. Millett, R.P. Selvam, and A. Saxena Stabilizing nanocrystalline materials with dopants Acta Mater. 55 2007 2329 2336
9. R. Kirchheim Reducing grain boundary, dislocation line and vacancy formation energies by solute segregation II. Experimental evidence and consequences Acta Mater. 55 2007 5139 5148
10. C.C. Koch, R.O. Scattergood, K.A. Darling, and J.E. Semones Stabilization of nanocrystalline grain sizes by solute additions J. Mater. Sci. 43 2008 7264 7272
11. S. Romankov, Y.C. Park, I.V. Shchetinin, and J.M. Yoon Atomic-scale intermixing, amorphization and microstructural development in a multicomponent system subjected to surface severe plastic deformation Acta Mater. 61 2013 1254 1265
12. Y. Zhang, T.T. Zuo, Z. Tang, M.C. Gao, K.A. Dahmen, P.K. Liaw, and Z.P. Lu Microstructures and properties of high-entropy alloys Prog. Mater. Sci. 61 2014 1 93
13. Y. Zhang, Y.J. Zhou, J.P. Lin, G.L. Chen, and P.K. Liaw Solid-solution phase formation rules for multi-component alloys Adv. Eng. Mater. 10 6 2008 534 538
14. C.M. Lin, and H.L. Tsai Equilibrium phase of high-entropy FeCoNiCrCu0.5 alloy at elevated temperature J. Alloys Comp. 489 2010 30 35
15. S. Singh, N. Wanderka, B.S. Murty, U. Glatzel, and J. Banhart Decomposition in multi-component AlCoCrCuFeNi high-entropy alloy Acta Mater. 59 2011 182 190
16. R. Raghavan, K.C. Hari Kumar, and B.S. Murty Analysis of phase formation in multi-component alloys J. Alloys Comp. 544 2012 152 158
17. 33high entropy alloys and comparison with equilibrium phases predicted by thermo-calc J. Alloys Comp. 5524 2013 430 436
18. F. Otto, Y. Yang, H. Bei, and E.P. George Relative effects of enthalpy and entropy on the phase stability of equiatomic high-entropy alloys Acta Mater. 61 2013 2628 2638
19. R.K. Islamgaliev, F. Chmelik, and R. Kuzel Thermal stability of submicron grained copper and nickel Mater. Sci. Eng. A 237 1997 43 51
20. J. Cizek, I. Prochazka, M. Cieslar, R. Kuzel, J. Kuriplach, F. Chmelik, I. Stulikova, F. Becvar, and O. Melikhova Thermal stability of ultrafine grained copper Phys. Rev. B 65 2002 094106
21. R.J. Hellmig, M. Janecek, B. Hadzima, O.V. Gendelman, M. Shapiro, X. Molodova, A. Springer, and Y. Estrin Mater. Trans. JIM 49 2008 31 37
22. T. Sourmail Near equiatomic FeCo alloys: constitution, mechanical and magnetic properties Prog. Mater. Sci. 50 2005 816 880
23. X. Li, and S. Takahashi Synthesis and magnetic properties of Fe-Co-Ni nanoparticles by hydrogen plasma-metal reaction J. Magn. Magn. Mater. 214 2000 195 203
24. L.X. Phua, N.N. Phuoc, and C.K. Ong Effect of Ni concentration on microstructure, magnetic and microwave properties of electrodeposited NiCoFe films J. Alloys Comp. 543 2012 1 6
25. G. Kurdjumov, and G. Sachs Über den Mechanismus tier Stahlhärtung Z. Phys. 64 1930 325 343
26. X. Liu, N.T. Nuhfer, A.D. Rollett, S. Sinha, S.-B. Lee, J.S. Carpenter, J.E. LeDonne, A. Darbal, and K. Barmak Interfacial orientation and misorientation relationships in nanolamellar Cu/Nb composites using transmission-electron-microscope-based orientation and phase mapping Acta Mater. 64 2014 333 344
27. D.G. Morris, and M.A. Morris Microstructure and strength of nanocrystalline copper alloy prepared by mechanical alloying Acta Mater. 39 1991 1763 1770
28. 42amorphous/nanocrystalline powders by PM J. Alloys Comp. 536S 2012 S154 S158
29. A.R. Varela, M. Lupini, K. van Benthem, A.Y. Borisevich, M.F. Chisholm, N. Shibata, E. Abe, and S.J. Pennycook Materials characterization in the aberration-corrected scanning transmission electron microscope Annu. Rev. Mater. Res. 35 2005 539 569
30. D.B. Williams, and C.B. Carter Transmission Electron Microscopy second ed. 2009 Springer
31. U. Koster, and L. Jastrow Oxidation of Zr-based metallic glasses and nanocrystalline alloys Mater. Sci. Eng. A 449-451 2007 57 62
32. E. Kolawa, X. Sun, J.S. Reid, J.S. Chen, M.A. Nicolet, and R. Ruiz Amorphous W40Re40B20 diffusion barriers for 〈Si〉/Al and 〈Si〉/Cu metallizations Thin Solid Films 236 9 1993 301 305
33. M.A. Nicolet Ternary amorphous metallic thin films as diffusion barriers for Cu metallization Appl. Surf. Sci. 91 1995 269 276
34. R. Benedictus, A. Bottger, and E.J. Mittemeijer Thermodynamic model for solid-state amorphization in binary systems at interfaces and grain boundaries Phys. Rev. B 54 1996 9109 9125
35. A. Takeuchi, and A. Inoue Classification of bulk metallic glasses by atomic size difference, heat of mixing and period of constituent elements and its application to characterization of the main alloying element Mater. Trans. JIM 46 2005 2817 2829
36. Alloy Phase Diagrams, ASM Handbook, Volume 3, ASM International, 1992.
37. P. Lejcek, and S. Hofmann Thermodynamics and structural aspects of grain boundary segregation Crit. Rev. Solid State Mater. Sci. 20 1995 1 85
38. J.L. Meijering Calculation of the nickel-chromium-copper phase diagram from binary data Acta Metall. 5 1957 257 264
39. B. Mozer, D.T. Keating, and S.C. Moss Neutron measurement of clustering in the alloy CuNi Phys. Rev. 175 1968 868 876
40. S. Mehrizi, M.H. Sohi, and S.A.S. Ebrahimi Study of microstructure and magnetic properties of electrodeposited nanocrystalline CoFeNiCu thin films Surf. Coat. Technol. 205 2011 4757 4763
41. J.O. Lee, H.K. Kim, G.H. Kim, and W.Y. Jeung Tailoring the magnetic properties of CoFeNi alloys with variations in copper contents J. Appl. Phys. 99 2006 08B704