Effect of layer thickness and printing orientation on mechanical properties and dimensional accuracy of 3D printed porous samples for bone tissue engineering

PLoS ONE

Volumn 9, Issue 9, 2014, Pages

  Farzadi, Arghavan ^a   Solati Hashjin, Mehran ^a,b   Asadi Eydivand, Mitra ^a   Osman, Noor Azuan Abu ^a  

^a UNIVERSITY OF MALAYA   (Malaysia)

^b AMIRKABIR UNIVERSITY OF TECHNOLOGY   (Iran)

Author keywords

[No Author keywords available]

Indexed keywords

CALCIUM SULFATE; MOLECULAR SCAFFOLD; BONE PROSTHESIS;

ACCURACY; ARTICLE; BONE TISSUE; CHEMICAL COMPOSITION; COMPRESSIVE STRENGTH; GENERAL DEVICE; MICRO-COMPUTED TOMOGRAPHY; MORPHOLOGY; PARTICLE SIZE; PHYSICAL CHEMISTRY; POROSITY; POWDER BASED INKJET 3D PRINTING; PRINTING; SCANNING ELECTRON MICROSCOPY; THICKNESS; TISSUE ENGINEERING; X RAY DIFFRACTION; YOUNG MODULUS; BONE PROSTHESIS; CHEMISTRY; HUMAN; POWDER DIFFRACTION; STANDARDS; SURFACE PROPERTY; THREE DIMENSIONAL PRINTING; TISSUE SCAFFOLD;

BONE SUBSTITUTES; CALCIUM SULFATE; ELASTIC MODULUS; HUMANS; POROSITY; POWDER DIFFRACTION; PRINTING, THREE-DIMENSIONAL; SURFACE PROPERTIES; TISSUE ENGINEERING; TISSUE SCAFFOLDS; X-RAY DIFFRACTION; X-RAY MICROTOMOGRAPHY;

EID: 84907217632     PISSN: None     EISSN: 19326203     Source Type: Journal    
DOI: 10.1371/journal.pone.0108252     Document Type: Article

References (41)

1. Butscher A, Bohner M, Roth C, Ernstberger A, Heuberger R, et al. (2012) Printability of calcium phosphate powders for three-dimensional printing of tissue engineering scaffolds. Acta Biomaterialia 8: 373-385.
2. Suwanprateeb J, Sanngam R, Panyathanmaporn T (2010) Influence of raw powder preparation routes on properties of hydroxyapatite fabricated by 3D printing technique. Materials Science and Engineering: C 30: 610-617.
3. Shanjani Y, Croos D, Amritha J, Pilliar RM, Kandel RA, et al. (2010) Solid freeform fabrication and characterization of porous calcium polyphosphate structures for tissue engineering purposes. Journal of Biomedical Materials Research Part B: Applied Biomaterials 93: 510-519.
4. Leong K, Cheah C, Chua C (2003) Solid freeform fabrication of three-dimensional scaffolds for engineering replacement tissues and organs. Bioma-terials 24: 2363-2378.
5. Bibb R, Thompson D, Winder J (2011) Computed tomography characterisation of additive manufacturing materials. Medical engineering & physics 33: 590-596.
6. Castilho M, Dias M, Gbureck U, Groll J, Fernandes P, et al. (2013) Fabrication of computationally designed scaffolds by low temperature 3D printing. Biofabrication 5: 035012.
7. Serra T, Planell JA, Navarro M (2013) High-resolution PLA based composite scaffolds via 3D printing technology. Acta biomaterialia 9: 5521-5530.
8. Chua C, Liu M, Chou S. Additive manufacturing-assisted scaffold-based tissue engineering; 2011. CRC Press. pp. 13-21.
9. Gbureck U, Hölzel T, Klammert U, Würzler K, Müller FA, et al. (2007) Resorbable dicalcium phosphate bone substitutes prepared by 3D powder printing. Advanced Functional Materials 17: 3940-3945.
10. Dimitrov D, Van Wijck W, Schreve K, De Beer N (2006) Investigating the achievable accuracy of three dimensional printing. Rapid Prototyping Journal 12: 42-52.
11. Yan X, Gu P (1996) A review of rapid prototyping technologies and systems. Computer-Aided Design 28: 307-318.
12. Billiet T, Vandenhaute M, Schelfhout J, Van Vlierberghe S, Dubruel P (2012) A review of trends and limitations in hydrogel-rapid prototyping for tissue engineering. Biomaterials 33: 6020-6041.
13. Zhou Z, Buchanan F, Mitchell C, Dunne N (2014) Printability of calcium phosphate: calcium sulfate powders for the application of tissue engineered bone scaffolds using the 3D printing technique. Mater Sci Eng C Mater Biol Appl 38: 1-10.
14. Liu W, Li Y, Liu J, Niu X, Wang Y, et al. (2013) Application and Performance of 3D Printing in Nanobiomaterials. Journal of Nanomaterials 2013.
15. Tian X, Li D, Heinrich Jr G (2011) Net-Shaping of Ceramic Components by Using Rapid Prototyping Technologies.
16. Seitz H, Rieder W, Irsen S, Leukers B, Tille C (2005) Three-dimensional printing of porous ceramic scaffolds for bone tissue engineering. Journal of Biomedical Materials Research Part B: Applied Biomaterials 74: 782-788.
17. Kumar S, Kruth J-P (2010) Composites by rapid prototyping technology. Materials & Design 31: 850-856.
18. Butscher A, Bohner M, Doebelin N, Galea L, Loeffel O, et al. (2013) Moisture based three-dimensional printing of calcium phosphate structures for scaffold engineering. Acta Biomaterialia 9: 5369-5378.
19. Chumnanklang R, Panyathanmaporn T, Sitthiseripratip K, Suwanprateeb J (2007) 3D printing of hydroxyapatite: Effect of binder concentration in pre-coated particle on part strength. Materials Science and Engineering: C 27: 914-921.
20. Leukers B, Gülkan H, Irsen SH, Milz S, Tille C, et al. (2005) Hydroxyapatite scaffolds for bone tissue engineering made by 3D printing. Journal of Materials Science: Materials in Medicine 16: 1121-1124.
21. Peltola SM, Melchels FP, Grijpma DW, Kellomäki M (2008) A review of rapid prototyping techniques for tissue engineering purposes. Annals of medicine 40: 268-280.
22. Castilho M, Moseke C, Ewald A, Gbureck U, Groll J, et al. (2014) Direct 3D powder printing of biphasic calcium phosphate scaffolds for substitution of complex bone defects. Biofabrication 6: 015006.
23. Vaezi M, Chua CK (2011) Effects of layer thickness and binder saturation level parameters on 3D printing process. The International Journal of Advanced Manufacturing Technology 53: 275-284.
24. Vorndran E, Klarner M, Klammert U, Grover LM, Patel S, et al. (2008) 3D Powder Printing of b-Tricalcium Phosphate Ceramics Using Different Strategies. Advanced Engineering Materials 10: B67-B71.
25. Utela B, Storti D, Anderson R, Ganter M (2008) A review of process development steps for new material systems in three dimensional printing (3DP). Journal of Manufacturing Processes 10: 96-104.
26. Jones JR, Hench LL (2003) Regeneration of trabecular bone using porous ceramics. Current Opinion in Solid State and Materials Science 7: 301-307.
27. Withell A, Diegel O, Grupp I, Reay S, de Beer D, et al. Porous ceramic filters through 3D printing; 2011. CRC Press. pp. 313.
28. Bergmann C, Lindner M, Zhang W, Koczur K, Kirsten A, et al. (2010) 3D printing of bone substitute implants using calcium phosphate and bioactive glasses. Journal of the European Ceramic Society 30: 2563-2567.
29. Wu C, Fan W, Zhou Y, Luo Y, Gelinsky M, et al. (2012) 3D-printing of highly uniform CaSiO 3 ceramic scaffolds: preparation, characterization and in vivo osteogenesis. Journal of Materials Chemistry 22: 12288-12295.
30. Butscher A, Bohner M, Doebelin N, Hofmann S, Müller R (2013) New depowdering-friendly designs for three-dimensional printing of calcium phosphate bone substitutes. Acta biomaterialia 9: 9149-9158.
31. Declercq HA, Desmet T, Berneel EEM, Dubruel P, Cornelissen MJ (2013) Synergistic effect of surface modification and scaffold design of bioplotted 3-D poly-e-caprolactone scaffolds in osteogenic tissue engineering. Acta Biomater-ialia 9: 7699-7708.
32. Liu C, Xia Z, Czernuszka JT (2007) Design and Development of Three-Dimensional Scaffolds for Tissue Engineering. Chemical Engineering Research and Design 85: 1051-1064.
33. Shanjani Y, Hu Y, Pilliar RM, Toyserkani E (2011) Mechanical characteristics of solid-freeform-fabricated porous calcium polyphosphate structures with oriented stacked layers. Acta biomaterialia 7: 1788-1796.
34. Yoo J, Cima M, Khanuja S, Sachs E. Structural ceramic components by 3D printing; 1993. DTIC Document. pp. 40-50.
35. Suwanprateeb J, Thammarakcharoen F, Wasoontararat K, Suvannapruk W (2012) Influence of printing parameters on the transformation efficiency of 3D-printed plaster of paris to hydroxyapatite and its properties. Rapid Prototyping Journal 18: 490-499.
36. Inzana JA, Olvera D, Fuller SM, Kelly JP, Graeve OA, et al. (2014) 3D printing of composite calcium phosphate and collagen scaffolds for bone regeneration. Biomaterials 35: 4026-4034.
37. Zhou Z, Mitchell CA, Buchanan FJ, Dunne NJ (2012) Effects of Heat Treatment on the Mechanical and Degradation Properties of 3D-Printed Calcium-Sulphate-Based Scaffolds. ISRN Biomaterials 2013: 1-10.
38. Butscher A, Bohner M, Hofmann S, Gauckler L, Müller R (2011) Structural and material approaches to bone tissue engineering in powder-based three-dimensional printing. Acta Biomaterialia 7: 907-920.
39. Bose S, Vahabzadeh S, Bandyopadhyay A (2013) Bone tissue engineering using 3D printing. Materials Today 16: 496-504.
40. Will J, Detsch R, Boccaccini AR (2013) Chapter 7.1-Structural and Biological Characterization of Scaffolds. In: Bandyopadhyay A, Bose S, editors. Characterization of Biomaterials. Oxford: Academic Press. pp. 299-310.
41. Lu K, Reynolds WT (2008) 3DP process for fine mesh structure printing. Powder Technology 187: 11-18.