Porous Ceramic Materials

Handbook of Advanced Ceramics: Materials, Applications, Processing, and Properties: Second Edition

Volumn , Issue , 2013, Pages 1131-1148

  Ohji, Tatsuki ^a  

^a NATIONAL INSTITUTE OF ADVANCED INDUSTRIAL SCIENCE AND TECHNOLOGY AIST   (Japan)

Author keywords

[No Author keywords available]

Indexed keywords

MATERIALS;

POROUS CERAMIC MATERIALS;

CERAMIC MATERIALS;

EID: 84907093922     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1016/B978-0-12-385469-8.00059-9     Document Type: Chapter

References (221)

1. Messing G.L., Stevenson A.J. Toward pore-free ceramics. Science 2008, 322:383-384.
2. Colombo P. In praise of pores. Science 2008, 322:381-383.
3. Kelly A. Why engineer porous materials?. Phil Trans R Soc A 2006, 364:5-14.
4. Greil P. Advanced engineering ceramics. Adv Mater 2002, 14(10):709-716.
5. Schuth F. Engineered porous catalytic materials. Annu Rev Mater Res 2005, 35:209-238.
6. Yuan Z.-Y., Su B.-L. Insights into hierarchically meso-macroporous structured materials. J Mater Chem 2006, 16:663-677.
7. Colombo P. Conventional and novel processing methods for cellular ceramics. Phil Trans R Soc A 2006, 364:109-124.
8. Colombo P. Engineering porosity in polymer-derived ceramics. J Eur Ceram Soc 2008, 28:1389-1395.
9. Studart A.R., Gonzenbach U.T., Tervoort E., Gauckler L.J. Processing routes to macroporous ceramics: a review. J Am Ceram Soc 2006, 89(6):1771-1789.
10. Takahashi M., Menchavez R.L., Fuji M., Takegami H. Opportunities of porous ceramics fabricated by gelcasting in mitigating environmental issues. J Eur Ceram Soc 2009, 29:823-828.
11. Kumar B.V.M., Kim Y.-W. Processing of polysiloxane-derived porous ceramics: a review. Sci Technol Adv Mater 2010, 11:044303.
12. Colombo P., Vakifahmetoglu C., Costacurta S. Fabrication of ceramic components with hierarchical porosity. J Mater Sci 2010, 45:5425-5455.
13. Scheffler M., Colombo P. Cellular ceramics, structure, manufacturing, properties and applications 2005, WILEY-VCH Verlag GmbH, pp. 645.
14. Green D.J., Colombo P. Cellular ceramics: intriguing structures, novel properties, and innovative applications. MRS Bull 2003, 28(4):296-300.
15. Adler J. Ceramic diesel particulate filters. Int J Appl Ceram Technol 2005, 2(6):429-439.
16. Shyam A., Lara-Curzio E., Watkins T.R., Parten R.J. Mechanical characterization of diesel particulate filter substrates. J Am Ceram Soc 2008, 91(6):1995-2001.
17. Pyzik A.J., Li C.G. New design of a ceramic filter for diesel emission control applications. Int J Appl Ceram Technol 2005, 2(6):440-451.
18. Wakita M. Application and development in the future of ceramic membrane. Bull Ceram Soc Jpn 2010, 45:796-800. [in Japanese].
19. Taslicukur Z., Balaban C., Kuskonmaz N. Production of ceramic foam filters for molten metal filtration using expanded polystyrene. J Eur Ceram Soc 2007, 27:637-640.
20. Zhang Y., Yu J., Chen S., Wan S. Wastewater treatment using bioreactor with dual functional ceramic membrane. Int J Environ Pollut 2009, 38(3):318-327.
21. Le Guehennec L., Layrolle P., Daculsi G. A review of bioceramics and fibrin sealant. Eur Cell Mater 2004, 8:1-11.
22. Suzuki T., Zahir H., Funabashi Y., Yamaguchi T., Fujishiro Y., Awano M. Impact of anode microstructure on solid oxide fuel cells. Science 2009, 325:852-855.
23. Roncari E., Galassi C., Craciun F., Capiani C., Piancastelli A. A microstructural study of porous piezoelectric ceramics obtained by different methods. J Eur Ceram Soc 2001, 21(3):409-417.
24. Litovsky E.Y., Shapiro M. Gas pressure and temperature dependences of thermal conductivity of porous ceramic materials: part 1, refractories and ceramics with porosity below 30%. J Am Ceram Soc 1992, 75(12):3425-3439.
25. Litovsky E., Shapiro M., Shavit A. Gas pressure and temperature dependences of thermal conductivity of porous ceramic materials: part 2, refractories and ceramics with porosity exceeding 30%. J Am Ceram Soc 1996, 79(5):1366-1376.
26. 3-NaF eutectics. J Eur Ceram Soc 2008, 28:2451-2457.
27. Larrea A., Orera V.M. Porous crystal structures obtained from directionally solidified eutectic precursors. J Crystal Growth 2007, 300:387-393.
28. 3-δ porous ceramics using a phase-leaching method. J Am Ceram Soc 2008, 91(12):4118-4120.
29. Suzuki Y., Morgan P.E.D. Meso- and macroporous ceramics by phase separation and reactive sintering methods. MRS Bull 2009, 34(8):587-591.
30. Ueno S., Lin L.M., Nakajima H. Formation mechanism of porous alumina with oriented cylindrical pores fabricated by unidirectional solidification. J Am Ceram Soc 2008, 91(1):223-226.
31. Fukushima M., Zhou Y., Miyazaki H., Yoshizawa Y., Hirao K., Iwamoto Y., et al. Microstructural characterization of porous silicon carbide membrane support with and without alumina additive. J Am Ceram Soc 2006, 89(5):1523-1529. (For example).
32. Nanjangud S.C., Brezny R., Green D.J. Strength and Young's modulus behavior of a partially sintered porous alumina. J Am Ceram Soc 1995, 78(1):266-268. 1995.
33. Hardy D., Green D.J. Mechanical properties of a partially sintered alumina. J Eur Ceram Soc 1995, 15:769-775.
34. Oh S.T., Tajima K.I., Ando M., Ohji T. Strengthening of porous alumina by pulse electric current sintering and nanocomposite processing. J Am Ceram Soc 2000, 83(5):1314-1316.
35. Jayaseelan D.D., Kondo N., Brito M.E., Ohji T. High-strength porous alumina ceramics by the pulse electric current sintering technique. J Am Ceram Soc 2002, 85(1):267-269.
36. Yang Y., Wang Y., Tian W., Wang Z., Li C.-G., Zhao Y., et al. In situ porous alumina/aluminum titanate ceramic composite prepared by spark plasma sintering from nanostructured powders. Scripta Mater 2009, 60:578-581.
37. Akhtar F., Vasiliev P.O., Bergström L. Hierarchically porous ceramics from diatomite powders by pulsed current processing. J Am Ceram Soc 2009, 92(2):338-343.
38. 3. J Am Ceram Soc 2001, 84(3):485-491.
39. Deng Z.-Y., Fukasawa T., Ando M., Zhang G.J., Ohji T. Microstructure and mechanical properties of porous alumina ceramics fabricated by the decomposition of aluminum hydroxide. J Am Ceram Soc 2001, 84(11):2638-2644.
40. 2 ceramics and the reinforcing mechanisms. Acta Mater 2003, 51:731-739.
41. Claussen N., Wu S., Holz D. Reaction bonding of aluminum oxide (RBAO) composites: processing, reaction mechanisms and properties. J Eur Ceram Soc 1994, 14:97-109.
42. She J.H., Ohji T. Fabrication and characterization of highly porous mullite ceramics. Mater Chem Phys 2003, 80(3):610-614.
43. 3/MgO composites with three-dimensional network structure from natural dolomite. J Am Ceram Soc 2000, 83(8):2091-2093.
44. Suzuki Y., Kondo N., Ohji T., Morgan P.E.D. Uniformly porous composites with 3-D network structure (UPC-3D) for high-temperature filter applications. Int J Appl Ceram Technol 2004, 1(1):76-85.
45. 3 composite. J Ceram Soc Jpn 2001, 109(3):205-209.
46. Suzuki Y., Kondo N., Ohji T. Reactive synthesis of a porous calcium zirconate/spinel composite with idiomorphic spinel grains. J Am Ceram Soc 2003, 86(7):1128-1131.
47. She J.H., Yang J.F., Kondo N., Ohji T., Kanzaki S., Deng Z.Y. High-strength porous silicon carbide ceramics by an oxidation-bonding technique. J Am Ceram Soc 2002, 85(11):2852-2854.
48. Ding S., Zeng Y.-P., Jiang D. Oxidation bonding of porous silicon nitride ceramics with high strength and low dielectric constant. Mater Lett 2007, 61:2277-2280.
49. Ding S., Zhu S., Zeng Y.-P., Jiang D. Fabrication of mullite-bonded porous silicon carbide ceramics by in situ reaction bonding. J Eur Ceram Soc 2007, 27:2095-2102.
50. Liu S., Zeng Y.-P., Jiang D. Fabrication and characterization of cordierite-bonded porous SiC ceramics. Ceram Int 2009, 35:597-602.
51. 3-MgO-(CaO) additions (RE = La, Nd, Y, Yb). Mater Sci Eng A 2008, 489:337-350.
52. 3 as sintering additive. J Eur Ceram Soc 2003, 23:371-378.
53. Yang J.F., Ohji T., Kanzaki S., Diaz A., Hampshire S. Microstructure and mechanical properties of silicon nitride ceramics with controlled porosity. J Am Ceram Soc 2002, 85(6):1512-1516.
54. Yang J., Yang J.F., Shan S.Y., Gao J.Q., Ohji T. Effect of sintering additives on microstructure and mechanical properties of porous silicon nitride ceramics. J Am Ceram Soc 2006, 89(12):3843-3845.
55. 4 Structured Porous Ceramics Using Carbothermal Nitridation of Silica. Acta Mater 2005, 53(10):2981-2990.
56. 3-2MgO sintering additives. Ceram Int 2009, 35:2305-2310.
57. Inagaki Y., Ohji T., Kanzaki S., Shigegaki Y. Fracture energy of an aligned porous silicon nitride. J Am Ceram Soc 2000, 83(7):1807-1809.
58. Inagaki Y., Shigegaki Y., Ando M., Ohji T. Synthesis and evaluation of anisotropic porous silicon nitride. J Eur Ceram Soc 2004, 24:197-200.
59. Colombo P., Bernardo E., Biasetto L. Novel microcellular ceramics from a silicone resin. J Am Ceram Soc 2004, 87(1):152-154.
60. Colombo P., Bernardo E. Macro- and micro-cellular porous ceramics from preceramic polymers. Compos Sci Technol 2003, 63(16):2353-2359.
61. Biasetto L., Colombo P., Innocentini M.D.M., Mullens S. Gas permeability of microcellular ceramic foams. Ind Eng Chem Res 2007, 46:3366-3372.
62. 2 ceramics with idealized macropores. J Eur Ceram Soc 2008, 28:1783-1791.
63. Descamps M., Duhoo T., Monchau F., Lu J., Hardouin P., Hornez J.C., et al. Manufacture of macroporous β-tricalcium phosphate bioceramics. J Eur Ceram Soc 2008, 28:149-157.
64. Descamps M., Richart O., Hardouin P., Hornez J.C., Leriche A. Synthesis of macroporous β-tricalcium phosphate with controlled porous architectural. Ceram Int 2008, 34:1131-1137.
65. 4 ceramics with rod-shaped pore structure. J Am Ceram Soc 2005, 88(4):1030-1032.
66. 4 pore-forming agent. J Am Ceram Soc 2007, 90(8):2379-2383.
67. Luyten J., Mullens S., Cooymans J., De Wilde A.M., Thijs I. New processing techniques of ceramic foams. Adv Eng Mater 2003, 5(10):715-718.
68. Thijs I., Luyten J., Mullens S. Producing ceramic foams with hollow spheres. J Am Ceram Soc 2004, 87(1):170-172.
69. Kumar B.P., Kumar H.H., Kharat D.K. Study on pore-forming agents in processing of porous piezoceramics. J Mater Sci Mater Electron 2005, 16(10):681-686.
70. Hotta Y., Alberius P.C.A., Bergstrom L. Coated polystyrene particles as templates for ordered macroporous silica structures with controlled wall thickness. J Mater Chem 2003, 13(3):496-501.
71. Wang D.Y., Caruso R.A., Caruso F. Synthesis of macroporous titania and inorganic composite materials from coated colloidal spheres - a novel route to tune pore morphology. Chem Mater 2001, 13(2):364-371.
72. Davis S.A., Breulmann M., Rhodes K.H., Zhang B., Mann S. Template-directed assembly using nanoparticle building blocks: a nanotectonic approach to organized materials. Chem Mater 2001, 13(10):3218-3226.
73. Kim Y.W., Kim S.H., Park C.B. Processing of closed-cell silicon oxycarbide foams from a preceramic polymer. J Mater Sci 2004, 39(18):5647-5652.
74. Kim Y.W., Jin Y.J., Chun Y.S., Song I.H., Kim H.D. A simple pressing route to closed-cell microcellular ceramics. Scripta Mater 2005, 53(8):921-925.
75. Li S.H., de Wijn J.R., Layrolle P., de Groot K. Novel method to manufacture porous hydroxyapatite by dual-phase mixing. J Am Ceram Soc 2003, 86(1):65-72.
76. Wang H., Sung I.Y., Li X.D., Kim D. Fabrication of porous SiC ceramics with special morphologies by sacrificing template method. J Porous Mater 2004, 11(4):265-271.
77. Chae S.-H., Kim Y.-W., Song I.-H., Kim H.-D., Narisawa M. Porosity control of porous silicon carbide ceramics. J Eur Ceram Soc 2009, 29:2867-2872.
78. 3-doped porous silicon nitride ceramics using phenolic resin as pore-forming agent. Int J Appl Ceram Technol 2010, 7:391-399.
79. Kamitani K., Hyodo T., Shimizu Y., Egashira M. Fabrication of porous alumina ceramics having cell windows with controlled size by PMMA template method. J Mater Sci 2010, 45:3602-3609.
80. Li Y., Chen F., Li L., Zhang W., Yu H., Shan Y., et al. Gas pressure sintering of arbitrary porous silicon nitride ceramics with high mechanical strength. J Am Ceram Soc 2010, 93:1565-1568.
81. Isobe T., Kameshima Y., Nakajima A., Okada K., Hotta Y. Gas permeability and mechanical properties of porous alumina ceramics with unidirectionally aligned pores. J Eur Ceram Soc 2007, 27:53-59.
82. Andersson L., Bergström L. Gas-filled microspheres as an expandable sacrificial template for direct casting of complex-shaped macroporous ceramics. J Eur Ceram Soc 2008, 28:2815-2821.
83. Kim Y.-W., Eom J.-H., Wang C., Park C.B. Processing of porous silicon carbide ceramics from carbon-filled polysiloxane by extrusion and carbothermal reduction. J Am Ceram Soc 2008, 91(4):1361-1364.
84. Eom J.-H., Kim Y.-W., Song I.-H., Kim H.-D. Processing and properties of polysiloxane-derived porous silicon carbide ceramics using hollow microspheres as templates. J Eur Ceram Soc 2008, 28:1029-1035.
85. Song I.-H., Kwon I.-M., Kim H.-D., Kim Y.-W. Processing of microcellular silicon carbide ceramics with a duplex pore structure. J Eur Ceram Soc 2010, 30:2671-2676.
86. Okada K., Uchiyama S., Isobe T., Kameshima Y., Nakajima A., Kurata T. Capillary rise properties of porous mullite ceramics prepared by an extrusion method using organic fibers as the pore former. J Eur Ceram Soc 2009, 29:2491-2497.
87. Okada K., Shimizu M., Isobe T., Kameshima Y., Sakai M., Nakajima A., et al. Characteristics of microbubbles generated by porous mullite ceramics prepared by an extrusion method using organic fibers as the pore for mer. J Eur Ceram Soc 2010, 30:1245-1251.
88. Gain A.K., Song H.Y., Lee B.T. Microstructure and mechanical properties of porous yttria stabilized zirconia ceramic using poly methyl methacrylate powder. Scripta Mater 2006, 54(12):2081-2085.
89. Eom J.-H., Kim Y.-W. Effect of template size on microstructure and strength of porous silicon carbide ceramics. J Ceram Soc Japan 2008, 116(1358):1159-1163.
90. Jiang G.-P., Yang J.-F., Gao J.-Q., Niihara K. Porous silicon nitride ceramics prepared by extrusion using starch as binder. J Am Ceram Soc 2008, 91(11):3510-3516.
91. Kitamura M., Ohtsuki C., Ogata S., Kamitakahara M., Tanihara M. Microstructure and bioresorbable properties of alpha-TCP ceramic porous body fabricated by direct casting method. Mater Trans 2004, 45(4):983-988.
92. Kamitakahara M., Ohtsuki C., Kawachi G., Wang D., Ioku K. Preparation of hydroxyapatite porous ceramics with different porous structures using a hydrothermal treatment with different aqueous solutions. J Ceram Soc Japan 2008, 116(1349):6-9.
93. Diaz A., Hampshire S. Characterisation of porous silicon nitride materials produced with starch. J Eur Ceram Soc 2004, 24(2):413-419.
94. Diaz A., Hampshire S., Yang J.F., Ohji T., Kanzaki S. Comparison of mechanical properties of silicon nitrides with controlled porosities produced by different fabrication routes. J Am Ceram Soc 2005, 88(3):698-706.
95. 3 by adding corn-starch. J Phys Chem Solids 2002, 11:2079-2084.
96. Zhang G.-J., Yang J.-F., Ohji T. Fabrication of porous ceramics with unidirectionally aligned continuous pores. J Am Ceram Soc 2001, 84(6):1395-1397.
97. 3 ceramics by use of natural fibres as pore developers. J Porous Mater 2008, 15(4):475-480.
98. Naga S.M., El-Maghraby A.A., El-Rafei A.M., Greil P., Khalifa T., Ibrahim N.A. Porous fibrous mullite bodies. Am Ceram Soc Bull 2006, 85(2):21-24.
99. Wang C., Kasuga T., Nogami M. Macroporous calcium phosphate glass-ceramic prepared by two-step pressing technique and using sucrose as a pore former. J Mater Sci Mater Med 2005, 16(8):739-744.
100. Sun Y., Tan S.H., Jiang D.L. Synthesis of porous silicon carbide and its catalysis. J Inorganic Mater 2003, 18(4):830-836.
101. da Silva M.H.P., Lemos A.F., Gibson I.R., Ferreira J.M.F., Santos J.D. Porous glass reinforced hydroxyapatite materials produced with different organic additives. J Non Cryst Solids 2002, 304(1-3):286-292.
102. Galassi C., Capiani C., Craciun F., Roncari E. Water-based technique to produce porous PZT materials. J Phys IV 2005, 128:27-31.
103. Barea R., Osendi M.I., Miranzo P., Ferreira J.M.F. Fabrication of highly porous mullite materials. J Am Ceram Soc 2005, 88(3):777-779.
104. Vasconcelos P.V., Labrincha J.A., Ferreira J.M.F. Permeability of diatomite layers processed by different colloidal techniques. J Eur Ceram Soc 2000, 20(2):201-207.
105. Zivcová Z., Cerny M., Pabst W., Gregorová E. Elastic properties of porous oxide ceramics prepared using starch as a pore-forming agent. J Eur Ceram Soc 2009, 29:2765-2771.
106. Shao Y., Jia D., Zhou Y., Liu B. Novel method for fabrication of silicon nitride/silicon oxynitride composite ceramic foams using fly ash cenosphere as a pore-forming agent. J Am Ceram Soc 2008, 91(11):3781-3785.
107. Okada K., Ikawa F., Isobe T., Kameshima Y., Nakajima A. Low temperature preparation and machinability of porous ceramics from talc and foamed glass particles. J Eur Ceram Soc 2009, 29:1047-1052.
108. 4 composites. J Am Ceram Soc 2006, 89(6):2057-2062.
109. Miyagawa N., Shinohara N. Fabrication of porous alumina ceramics with uni-directionally-arranged continuous pores using a magnetic field. J Ceram Soc Japan 1999, 107(7):673-677.
110. Isobe T., Tomita T., Kameshima Y., Nakajima A., Okada K. Preparation and properties of porous alumina ceramics with oriented cylindrical pores produced by an extrusion method. J Eur Ceram Soc 2006, 26:957-960.
111. Kim H., da Rosa C., Boaro M., Vohs J.M., Gorte R.J. Fabrication of highly porous yttria-stabilized zirconia by acid leaching nickel from a nickel-yttria-stabilized zirconia cermet. J Am Ceram Soc 2002, 85(6):1473-1476.
112. Rajamathi M., Thimmaiah S., Morgan P.E.D., Seshadri R. Macroporous materials from crystalline single-source precursors through decomposition followed by selective leaching. J Mater Chem 2001, 11(10):2489-2492.
113. She J.H., Deng Z.Y., Jayaseelan D.D., Ohji T. Oxidation bonding of porous silicon carbide ceramics. J Mater Sci 2002, 37(17):3615-3622.
114. Shao Y., Jia D., Liu B. Characterization of porous silicon nitride ceramics by pressureless sintering using fly ash cenosphere as a pore-forming agent. J Eur Ceram Soc 2009, 29:1529-1534.
115. Jia D., Kim D.-K., Kriven W.M. Sintering behavior of gehlenite. Part I: self-forming, macro-/mesoporous gehlenite - pore-forming mechanism, microstructure, mechanical, and physical properties. J Am Ceram Soc 2007, 90(6):1760-1773.
116. Neirinck B., Fransaer J., der Biest O.V., Vleugels J. A novel route to produce porous ceramics. J Eur Ceram Soc 2009, 29:833-836.
117. Imhof A., Pine D.J. Ordered macroporous materials by emulsion templating. Nature 1997, 389(6654):948-951.
118. Fukasawa T., Ando M., Ohji T., Kanzaki S. Synthesis of porous ceramics with complex pore structure by freeze-dry processing. J Am Ceram Soc 2001, 84(1):230-232.
119. Fukasawa T., Deng Z.Y., Ando M., Ohji T., Goto Y. Pore structure of porous ceramics synthesized from water-based slurry by freeze-dry process. J Mater Sci 2001, 36(10):2523-2527.
120. Fukasawa T., Deng Z.Y., Ando M., Ohji T., Kanzaki S. Synthesis of porous silicon nitride with unidirectionally aligned channels using freeze-drying process. J Am Ceram Soc 2002, 85(9):2151-2155.
121. Koch D., Andresen L., Schmedders T., Grathwohl G. Evolution of porosity by freeze casting and sintering of sol-gel derived ceramics. J Sol-Gel Sci Technol 2003, 26(1-3):149-152.
122. Mukai S.R., Nishihara H., Tamon H. Formation of monolithic silica gel microhoneycombs (SMHs) using pseudosteady state growth of microstructural ice crystals. Chem Commun 2004, 7:874-875.
123. Pek Y.S., Gao S., Arshad M.S.M., Leck K.-J., Ying J.Y. Porous collagen-apatite nanocomposite foams as bone regeneration scaffolds. Biomaterials 2008, 29:4300-4305.
124. Schoof H., Apel J., Heschel I., Rau G. Control of pore structure and size in freeze-dried collagen sponges. J Biomed Mater Res 2001, 58:352-357.
125. 2 by a novel freeze casting. Ceram Int 2009, 35:1267-1270.
126. Landi E., Valentini F., Tampieri A. Porous hydroxyapatite/gelatine scaffolds with ice-designed channel-like porosity for biomedical applications. Acta Biomater 2008, 4(6):1620-1626.
127. Deville S., Saiz E., Nalla R.K., Tomsia A.P. Freezing as a path to build complex composites. Science 2006, 311:515-518.
128. Deville S., Saiz E., Tomsia A.P. Ice-templated porous alumina structures. Acta Mater 2007, 55:1965-1974.
129. Deville S. Freeze-casting of porous ceramics: a review of current achievements and issues. Adv Eng Mater 2008, 10(3):155-169.
130. Deville S., Maire E., Bernard-Granger G., Lasalle A., Bogner A., Gauthier C., et al. Metastable and unstable cellular solidification of colloidal suspensions. Nature Mater 2009, 8:966-972.
131. Munch E., Launey M.E., Alsem D.H., Saiz E., Tomsia A.P., Ritchie R.O. Tough, bio-inspired hybrid materials. Science 2008, 322:1516-1520.
132. Araki K., Halloran J.W. New freeze-casting technique for ceramics with sublimable vehicles. J Am Ceram Soc 2004, 87(10):1859-1863.
133. Araki K., Halloran J.W. Room-temperature freeze casting for ceramics with nonaqueous sublimable vehicles in the naphthalene-camphor eutectic system. J Am Ceram Soc 2004, 87(11):2014-2019.
134. Araki K., Halloran J.W. Porous ceramic bodies with interconnected pore channels by a novel freeze casting technique. J Am Ceram Soc 2005, 88(5):1108-1114.
135. Koh Y.-H., Song J.-H., Lee E.-J., Kim H.-E. Freezing dilute ceramic/camphene slurry for ultra-high porosity ceramics with completely interconnected pore networks. J Am Ceram Soc 2006, 89(10):3089-3093.
136. Koh Y.-H., Lee E.-J., Yoon B.-H., Song J.-H., Kim H.-E., Kim H.-W. Effect of polystyrene addition on freeze casting of ceramic/camphene slurry for ultra-high porosity ceramics with aligned pore channels. J Am Ceram Soc 2006, 89(12):3646-3653.
137. Yoon B.-H., Choi W.-Y., Kim H.-E., Kim J.-H., Koh Y.-H. Aligned porous alumina ceramics with high compressive strengths for bone tissue engineering. Scripta Mater 2008, 58(7):537-540.
138. Yoon B.-H., Koh Y.-H., Park C.-S., Kim H.-E. Generation of large pore channels for bone tissue engineering using camphene-based freeze casting. J Am Ceram Soc 2007, 90(6):1744-1752.
139. Yoon B.-H., Park C.-S., Kim H.-E., Koh Y.-H. In situ synthesis of porous silicon carbide (SiC) ceramics decorated with SiC nanowires. J Am Ceram Soc 2007, 90(12):3759-3766.
140. Lee S.-H., Jun S.-H., Kim H.-E., Koh Y.-H. Fabrication of porous PZT-PZN piezoelectric ceramics with high hydrostatic figure of merits using camphene-based freeze casting. J Am Ceram Soc 2007, 90(9):2807-2813.
141. Lee S.-H., Jun S.-H., Kim H.-E., Koh Y.-H. Piezoelectric properties of PZT-based ceramic with highly aligned pores. J Am Ceram Soc 2008, 91(6):1912-1915.
142. Yoon B.-H., Lee E.-J., Kim H.-E., Koh Y.-H. Highly aligned porous silicon carbide ceramics by freezing polycarbosilane/camphene solution. J Am Ceram Soc 2007, 90(6):1753-1759.
143. Yoon B.-H., Park C.-S., Kim H.-E., Koh Y.-H. In-situ fabrication of porous hydroxyapatite (HA) scaffolds with dense shells by freezing HA/camphene slurry. Mater Lett 2008, 62:1700-1703.
144. Song J.-H., Koh Y.-H., Kim H.-E., Li L.-H., Bahn H.-J. Fabrication of a porous bioactive glass-ceramic using room-temperature freeze casting. J Am Ceram Soc 2006, 89(8):2649-2653.
145. Hong C., Zhang X., Han J., Du J., Han W. Ultra-high-porosity zirconia ceramics fabricated by novel room-temperature freeze-casting. Scripta Mater 2009, 60:563-566.
146. 2 ceramics fabricated by a camphene-based freeze-casting route: microstructure and properties. J Eur Ceram Soc 2010, 30:53-60.
147. Chen R.-F., Huang Y., Wang C.-A., Qi J. Ceramics with ultra-low density fabricated by gelcasting: an unconventional view. J Am Ceram Soc 2007, 90(11):3424-3429.
148. Chen R.-F., Wang C.-A., Huang Y., Ma L., Lin W. Ceramics with special porous structures fabricated by freeze-gelcasting: using tert-butyl alcohol as a template. J Am Ceram Soc 2007, 90(11):3478-3484.
149. Ding S., Zeng Y.-P., Jiang D. Fabrication of mullite ceramics with ultrahigh porosity by gel freeze drying. J Am Ceram Soc 2007, 90(7):2276-2279.
150. Zuo K.H., Zeng Y.-P., Jiang D.-L. Properties of microstructure-controllable porous yttria-stabilized ziroconia ceramics fabricated by freeze casting. Int J Appl Ceram Technol 2008, 5(2):198-203.
151. Pekor C.M., Groth B., Nettleship I. The effect of polyvinyl alcohol on the microstructure and permeability of freeze-cast alumina. J Am Ceram Soc 2010, 93(1):115-120.
152. Pekor C.M., Kisa P., Nettleship I. Effect of polyethylene glycol on the microstructure of freeze-cast alumina. J Am Ceram Soc 2008, 91(10):3185-3190.
153. Nishihara H., Mukai S.R., Yamashita D., Tamon H. Ordered macroporous silica by ice templating. Chem Mater 2005, 17(3):683-689.
154. Fukushima M., Nakata M., Yoshizawa Y. Fabrication and properties of ultra highly porous cordierite with oriented micrometer-sized cylindrical pores by gelation and freezing method. J Ceram Soc Japan 2008, 116(1360):1322-1325.
155. Fukushima M., Nakata M., Zhou Y., Ohji T., Yoshizawa Y. Fabrication and properties of ultra highly porous silicon carbide by the gelation-freezing method. J Eur Ceram Soc 2010, 30:2889-2896.
156. Ohji T., Suzuki Y., Yang J.-F., Hayashi I. Development of high performance filter materials. Materials Integration 2004, 17(4):5-13.
157. Faure R., Rossignol F., Chartier T., Bonhomme C., Maitrea A., Etchegoyen G., et al. Alumina foam catalyst supports for industrial steam reforming processes. J Eur Ceram Soc 2011, 31:303-312.
158. Zhu X., Jiang D., Tan S., Zhang Z. Improvement in the strut thickness of reticulated porous ceramics. J Am Ceram Soc 2001, 84(7):1654-1656.
159. Vogt U.F., Gorbar M., Dimopoulos P., Broenstrup A., Wagner G., Colombo P. Improving the properties of ceramic foams by a vacuum infiltration process. J Eur Ceram Soc 2010, 30:3005-3011.
160. Luyten J., Thijs I., Vandermeulen W., Mullens S., Wallaeys B., Mortelmans R. Strong ceramic foams from polyurethane templates. Adv Appl Ceram 2005, 104(1):4-8.
161. Jun I.-K., Koh Y.-H., Kim H.-E. Fabrication of a highly porous bioactive glass-ceramic scaffold with a high surface area and strength. J Am Ceram Soc 2006, 89(1):391-394.
162. Jun I.-K., Song J.-H., Choi W.-Y., Koh Y.-H., Kim H.-E., Kim H.-W. Porous hydroxyapatite scaffolds coated with bioactive apatite-wollastonite glass-ceramics. J Am Ceram Soc 2007, 90(9):2703-2708.
163. 2 for photocatalytic applications. Mater Lett 2009, 63:461-463.
164. Nangrejo M.R., Edirisinghe M.J. Porosity and strength of silicon carbide foams prepared using preceramic polymers. J Porous Mater 2002, 9(2):131-140.
165. Bao X., Nangrejo M.R., Edirisinghe M.J. Preparation of silicon carbide foams using polymeric precursor solutions. J Mater Sci 2000, 35(17):4365-4372.
166. Nangrejo M.R., Bao X., Edirisinghe M.J. The structure of ceramic foams produced using polymeric precursors. J Mater Sci Lett 2000, 19(9):787-789.
167. Nangrejo M.R., Bao X.J., Edirisinghe M.J. Preparation of silicon carbide-silicon nitride composite foams from pre-ceramic polymers. J Eur Ceram Soc 2000, 20(11):1777-1785.
168. Travitzky N., Windsheimer H., Fey T., Greil P. Preceramic paper-derived ceramics. J Am Ceram Soc 2008, 91(11):3477-3492.
169. Singh M., Martinez-Fernandez J., de A-Lopez A.R. Environmentally conscious ceramics (ecoceramics) from natural wood precursors. Curr Opin Solid State Mater Sci 2003, 7:247-254.
170. Singh M., Salem J.A. Mechanical properties and microstructure of biomorphic silicon carbide ceramics fabricated from wood precursors. J Eur Ceram Soc 2002, 22:2709-2717.
171. Singh M., Yee B.-M. Reactive processing of environmentally conscious, biomorphic ceramics from natural wood precursors. J Eur Ceram Soc 2004, 24:209-217.
172. Sieber H., Hoffmann C., Kaindl A., Greil P. Biomorphic cellular ceramics. Adv Eng Mater 2000, 2(3):105-109.
173. Qian J.M., Wang J.P., Jin Z.H. Preparation of biomorphic SiC-ceramics by the reactive infiltration on of Si into carbon template derived from basswood. Rare Metal Mater Eng 2004, 33(10):1065-1068.
174. Varela-Feria F.M., Martinez-Fernandez J., de Arellano-Lopez A.R., Singh M. Low density biomorphic silicon carbide: microstructure and mechanical properties. J Eur Ceram Soc 2002, 22(14-15):2719-2725.
175. Greil P., Lifka T., Kaindl A. Biomorphic cellular silicon carbide ceramics from wood: I. Processing and microstructure. J Eur Ceram Soc 1998, 18(14):1961-1973.
176. Zampieri A., Sieber H., Selvam T., Mabande G.T.P., Schwieger W., Scheffler F., et al. Biomorphic cellular SiSiC/zeolite ceramic composites: from Rattan palm to bioinspired structured monoliths for catalysis and sorption. Adv Mater 2005, 17(3):344.
177. Calderon N.R., Escandell M.M., Narciso J., Reinoso F.R. The role of carbon biotemplate density in mechanical properties of biomorphic SiC. J Eur Ceram Soc 2009, 29:465-472.
178. Kaul V.S., Faber K.T. Nanoindentation analysis of the elastic properties of porous SiC derived from wood. Scripta Mater 2008, 58:886-889.
179. Pappacena K.E., Faber K.T., Wang H., Porter W.D. Thermal conductivity of porous silicon carbide derived from wood precursors. J Am Ceram Soc 2007, 90(9):2855-2862.
180. Vogli E., Sieber H., Greil P. Biomorphic SiC-ceramic prepared by Si-vapor phase infiltration of wood. J Eur Ceram Soc 2002, 22:2663-2668.
181. 3 ceramics. Adv Mater 2005, 17(8):1088.
182. Streitwieser D.A., Popovska N., Gerhard H., Emig G. Application of the chemical vapor infiltration and reaction (M-R) technique for the preparation of highly porous biomorphic SiC ceramics derived from paper. J Eur Ceram Soc 2005, 25:817-828.
183. Popovska N., Streitwieser D.A., Xu C., Gerhard H. Paper derived biomorphic porous titanium carbide and titanium oxide ceramics produced by chemical vapor infiltration and reaction (CVI-R). J Eur Ceram Soc 2005, 25:829-836.
184. Greil P. Biomorphous ceramics from lignocellulosics. J Eur Ceram Soc 2001, 21:105-118.
185. Greil P., Vogli E., Feya T., Bezold A., Popovska N., Gerhard H., et al. Effect of microstructure on the fracture behavior of biomorphous silicon carbide ceramics. J Eur Ceram Soc 2002, 22:2697-2707.
186. Ota T., Imaeda M., Takase H., Kobayashi M., Kinoshita N., Hirashita T., et al. Porous titania ceramic prepared by mimicking silicified wood. J Am Ceram Soc 2000, 83(6):1521-1523.
187. Mizutani M., Takase H., Adachi N., Ota T., Daimon K., Hikichi Y. Porous ceramics prepared by mimicking silicified wood. Sci Technol Adv Mater 2005, 6(1):76-83.
188. Ota T., Takahashi M., Hibi T., Ozawa M., Suzuki S., Hikichi Y., et al. Biomimetic process for producing SiC 'wood'. J Am Ceram Soc 1995, 78(12):3409-3411.
189. Qian J.M., Jin Z.H. eparation and characterization of porous, biomorphic SiC ceramic with hybrid pore structure. J Eur Ceram Soc 2006, 26:1311-1316.
190. Locs J., Berzina-Cimdina L., Zhurinsh A., Loca D. Effect of processing on the microstructure and crystalline phase composition of wood derived porous SiC ceramics. J Eur Ceram Soc 2011, 31:183-188.
191. Torres-Raya C., Hernandez-Maldonado D., Ramirez-Rico J., Garcia-Ganan C., de Arellano-Lopez A.R., Martinez-Fernandez J. Fabrication, chemical etching, and compressive strength of porous biomimetic SiC for medical implants. J Mater Res 2008, 23(12):3247-3254.
192. 4 composite from sea sponge. J Porous Mater 2008, 15(4):419-425.
193. Song H.-Y., Islam S., Lee B.-T. A novel method to fabricate unidirectional porous hydroxyapatite body using ethanol bubbles in a viscous slurry. J Am Ceram Soc 2008, 91(9):3125-3127.
194. Banno T., Yamada Y., Nagae H. Fabrication of porous alumina ceramics by simultaneous thermal gas generating and thermal slurry solidification. J Ceram Soc Japan 2009, 117:713-716.
195. Tomita T., Kawasaki S., Okada K. Effect of viscosity on preparation of foamed silica ceramics by a rapid gelation foaming method. J Porous Mater 2005, 12:123-129.
196. Fuji M., Kato T., Zhang F., Takahashi M. Effects of surfactants on the microstructure and some intrinsic properties of porous building ceramics fabricated by gelcasting. Ceram Int 2006, 32:797-802.
197. Tan S.N., Fornasiero D., Sedev R., Ralston J. The role of surfactant structure on foam behaviour. Colloids Surf A 2005, 263:233-238.
198. Barg S., Soltmann C., Andrade M., Koch D., Grathwohl G. Cellular ceramics by direct foaming of emulsified ceramic powder suspensions. J Am Ceram Soc 2008, 91(9):2823-2829.
199. Barg S., Koch D., Grathwohl G. Processing and properties of graded ceramic filters. J Am Ceram Soc 2009, 92(12):2854-2860.
200. Barg S., Moraes E., Koch D., Grathwohl G. New cellular ceramics from high alkane phase emulsified suspensions (HAPES). J Eur Ceram Soc 2009, 29:2439-2446.
201. Kim H., Lee S., Han Y., Park J.-K. Control of pore size in ceramic foams: influence of surfactant concentration. Mater Chem Phys 2009, 113:441-444.
202. Colombo P., Modesti M. Silicon oxycarbide ceramic foams from a preceramic polymer. J Am Ceram Soc 1999, 82:573-578.
203. Colombo P., Hellmann J.R., Shelleman D.L. Mechanical properties of silicon oxycarbide ceramic foams. J Am Ceram Soc 2001, 84:2245-2251.
204. Kim Y.-W., Kim S.-H., Wang C., Park C.B. Fabrication of microcellular ceramics using gaseous carbon dioxide. J Am Ceram Soc 2003, 86:2231-2233.
205. Kim Y.-W., Wang C., Park C.B. Processing of porous silicon oxycarbide ceramics from extruded blends of polysiloxane and polymer microbead. J Ceram Soc Japan 2007, 115:419-442.
206. Du Z.P., Bilbao-Montoya M.P., Binks B.P., Dickinson E., Ettelaie R., Murray B.S. Outstanding stability of particle-stabilized bubbles. Langmuir 2003, 19(8):3106-3108.
207. Dickinson E., Ettelaie R., Kostakis T., Murray B.S. Factors controlling the formation and stability of air bubbles stabilized by partially hydrophobic silica nanoparticles. Langmuir 2004, 20(20). 8517-8125.
208. Binks B.P., Horozov T.S. Aqueous foams stabilized solely by silica nanoparticles. Angew Chem Int Ed 2005, 44(24):3722-3725.
209. Studart A.R., Gonzenbach U.T., Akartuna I., Tervoort E., Gauckler L.J. Materials from foams and emulsions stabilized by colloidal particles. J Mater Chem 2007, 17:3283-3289.
210. Gonzenbach U.T., Studart A.R., Tervoort E., Gauckler L.J. Stabilization of foams with inorganic colloidal particles. Langmuir 2006, 22(26):10983-10988.
211. Gonzenbach U.T., Studart A.R., Tervoort E., Gauckler L.J. Tailoring the microstructure of particle-stabilized wet foams. Langmuir 2007, 23(3):1025-1032.
212. Gonzenbach U.T., Studart A.R., Tervoort E., Gauckler L.J. Macroporous ceramics from particle-stabilized wet foams. J Am Ceram Soc 2007, 90(1):16-22.
213. Gonzenbach U.T., Studart A.R., Steinlin D., Tervoort E., Gauckler L.J. Processing of particle-stabilized wet foams into porous ceramics. J Am Ceram Soc 2007, 90(11):3407-3414.
214. Akartuna I., Studart A.R., Tervoort E., Gonzenbach U.T., Gauckler L.J. Stabilization of oil-in-water emulsions by colloidal particles modified with short amphiphiles. Langmuir 2008, 24(14):7161-7168.
215. Latella B.A., Henkel L., Mehrtens E.G. Permeability and high temperature strength of porous mullite-alumina ceramics for hot gas filtration. J Mater Sci 2006, 41:423-430.
216. Ding S., Zeng Y., Jiang D. Gas permeability behavior of mullite-bonded porous silicon carbide ceramics. J Mater Sci 2007, 42:7171-7175.
217. Innocentini M.D.M., Sepulveda P., Salvini V.R., Pandolfelli V.C., Coury J.R. Permeability and structure of cellular ceramics: a comparison between two preparation techniques. J Am Ceram Soc 1998, 81:3349-3352.
218. Moreira E.A., Innocentini M.D.M., Coury J.R. Permeability of ceramic foams to compressible and incompressible flow. J Eur Ceram Soc 2004, 24:3209-3218.
219. Ishizaki K., Komarneni S., Nanko K. Porous materials; process technology and applications 1998, Kluwer Academic Publisher.
220. Dullien F.A.L. Porous Media Fluid Transport and Pore Structure 1991, Academic Press.
221. Tomita T., Kawasaki S., Okada K. A novel preparation method for foamed silica ceramics by sol-gel reaction and mechanical foaming. J Porous Mater 2004, 11:107-115.