Rationalization of microstructure heterogeneity in INCONEL 718 builds made by the direct laser additive manufacturing process

Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science

Volumn 45, Issue 10, 2014, Pages 4470-4483

  Tian, Yuan ^a,d   McAllister, Donald ^a   Colijn, Hendrik ^a   Mills, Michael ^a   Farson, Dave ^a   Nordin, Mark ^b   Babu, Sudarsanam ^c  

^a Ohio State University   (United States)

^b ROLLS ROYCE CORPORATION   (United States)

^c University of Tennessee Knoxville   (United States)

^d MCGILL UNIVERSITY   (Canada)

Author keywords

[No Author keywords available]

Indexed keywords

3D PRINTERS; DIFFRACTION; HARDNESS; REPAIR; SCANNING ELECTRON MICROSCOPY; TRANSMISSION ELECTRON MICROSCOPY;

DIFFERENT LENGTH SCALE; ELECTRON BACK-SCATTERED DIFFRACTION; ELECTRON BACKSCATTERING DIFFRACTION; HEATING AND COOLING CYCLES; LASER ADDITIVE MANUFACTURING; MULTISCALE CHARACTERIZATIONS; PRECIPITATION KINETICS; SPATIAL HETEROGENEITY;

MICROSTRUCTURE;

EID: 84906782600     PISSN: 10735623     EISSN: None     Source Type: Journal    
DOI: 10.1007/s11661-014-2370-6     Document Type: Article

References (51)

1. E.A. Loria: Proc. Superalloy 718, Pittsburgh, 1989, TMS, Warrendale, PA, 1989.
2. J.F. Barker: Superalloy 718 Metallurgy and Application, TMS, Warrendale, PA, 1989, pp. 269-78.
3. R.E. Schafrik, D.D Ward, and J.R. Groh: in Superalloys 718, 625, 706, and Various Derivatives, E.A. Loria, ed., TMS, Warrendale, PA, 2001, pp. 1-11.
4. D.F. Paulonis and J.J. Schirra: in Superalloys 718, 625, 706 and Various Derivatives, E.A. Loria, ed., TMS, Warrendale, PA, 2001, pp. 13-23.
5. J.P. Collier, S.H. Wong, J.C. Phillips, and J.K. Tien: Metall. Trans. A, 1988, vol. 19A, pp. 657-67.
6. A. Devaux, L. Nazé, R. Molins, A. Pineau, A. Organista, J.Y. Guédou, J.F. Uginet, and P. Héritier: Mater. Sci. Eng. A, 2006, vol. A486, pp. 117-22.
7. X. Xie, Q. Liang, J. Dong, W. Meng, and Z. Xu: in Superalloys 718, 625, 706 and Various Derivatives, E.A. Loria, ed., TMS, Warrendale, PA, 1994, pp. 711-20.
8. M.K. Miller, S.S. Babu, and M.G. Burke: Mater. Sci. Eng. A, 1999, vol. A270, pp. 14-18.
9. M.K. Miller, S.S. Babu, and M.G. Burke: Mater. Sci. Eng. A, 2002, vol. A327, pp. 84-88.
10. R. Cozar and A. Pineau: Metall. Trans., 1973, vol. 4, pp. 47-59.
11. W.T. Geng, D.H. Ping, Y.F. Gu, C.Y. Cui, and H. Harada: Phys. Rev. B, 2007, vol. 76, pp. 2241021-10.
12. P.J. Phillips, D. McAllister, Y. Gao, D. Lv, R.E.A. Williams, B. Peterson, Y. Wang, and M.J. Mills: App. Phys. Lett., 2012, vol. 100, pp. 211913-1-211913-3.
13. J.L. Burger, R.R. Biederman, and W.H. Cuuts: Superalloy 718 - Metallurgy and Applications, E.A. Loria, ed., TMS, Warrendale, PA, 1989, pp. 207-17.
14. T. Alam M. Chaturvedi, S.P. Ringer, and J. Cairney: Mater. Sci. Eng. A, 2010, vol. 527, pp. 7770-74.
15. V. Kndrachuk, N. Wanferka, and J. Banhart: Mater. Sci. Eng. A, 2006, vol. 417, pp. 82-89.
16. D.D. Gu, W. Meiners, K. Wissenbach, and R. Poprawe: Int. Mater. Rev., 2012, vol. 57, pp. 133-64.
17. J. Andersson and G.P. Sjöberg: Sci. Technol. Weld. Join., 2012, vol. 7, pp. 49-59.
18. K. Makiewicz, S.S. Babu, M. Keller, and A. Chaudhary: Unpublished research, 2012.
19. J.E. Flinkfeldt and T.F. Pedersen: Mater. Sci. Forum, 1994, vols. 163-165, pp. 423-28.
20. W. König and P.K. Kirner: Proc. Laser Materials Processing: Industrial and Microelectronics Applications, SPIE, Bellingham, WA, 1994, vol. 2207, pp. 44-52.
21. M. Riabkina-Fishman and J. Zahavi: Lasers Eng., 1996, vol. 5, pp. 31-41.
22. A. Chaudhary: ASM Handbook, 2010, vol. 22B, pp. 240-52.
23. C. Zhang, L. Li, and A. Deceuster: J. Mater. Process. Technol., 2011, vol. 211, pp. 1478-87.
24. J. Ding, P. Colegrove, J. Mehnen, S. Ganguly, P.M. Sequeira Almeida, F. Wang, and S. Williams: Computat. Mater. Sci., 2011, vol. 50, pp. 3315-24.
25. A. Lundbäck and L.-E. Lindgren: Fin. Elem. Anal. Design, 2001, vol. 47, pp. 1169-77.
26. M. Chiumenti, M. Cervera, A. Salmi, C. Agelet de Saracibar, N. Dialami, and K. Matsui: Comput. Methods Appl. Mech. Eng., 2010, vol. 199, pp. 2343-59.
27. "Guide for Verification and Validation in Computation Weld Mechanics," AWS A9.5: 2013, American Welding Society, Miami, FL, 2013.
28. K. Makiewicz: Master's Thesis, The Ohio State University, Columbus, OH, 2013.
29. H. Qi, M. Azer, and A. Ritter: Metall. Mater. Trans. A, 2009, vol. 40A, pp. 2410-22.
30. Xiaoming Zhao, Jing Chen, Xin Lin, and Weidong Huang: Mater. Sci. Eng. A, 2008, vol. 478, pp. 119-24.
31. Fencheng Liu, Xin Lin, Chunping Huang, Menghua Song, Gaolin Yang, Jing Chen, and Weidong Huang: J. Alloys Compd., 2011, vol. 509, pp. 4505-09.
32. K.N. Amato, S.M. Gaytan, L.E. Murr, E. Martinez, P.W. Shindo, J. Hernandez, S. Collins, and F. Medina: Acta Mater., 2012, vol. 60, pp. 2229-39.
33. Yaocheng Zhang, Zhuguo Li, Pulin Nie, and Yixiong Wu: Metall. Mater. Trans. A, 2013, vol. 44A, pp. 706-18.
34. A. Tabernero, S. Lamikiz, E. Martínez, J. Ukar, and J. Figueras: Int. J. Mach. Tools Manufact., 2011, vol. 51, pp. 456-70.
35. M.J. Cieslak, T.J. Headley, and A.D. Romig: Metall. Trans. A, 1986, vol. 17A, pp. 2035-47.
36. M.J. Cieslak: Weld J., 1981, vol. 70, pp. 49-56.
37. G.A. Knorovsky, M.J. Cieslak, T.J. Headley, A.D. Romig, Jr., and W.F. Hammetter: Metall. Trans. A, 1989, vol. 20A, pp. 2149-58.
38. J.C. Lippold, S.D. Kiser, and J.N. DuPont: Welding Metallurgy and Weldability of Nickel-Base Alloys, John Wiley and Sons Inc., New York, NY, 2009.
39. AMS 5596 Specification "Nickel Alloy, Corrosion and Heat Resistant, Sheet, Strip, Foil, and Plate 52.5Ni 19Cr 3.0Mo 5.1Cb 0.90Ti 0.50Al 18Fe Consumable Electrode or Vacuum Induction Melted, 1775°F (968 °C) Solution Heat Treated," AMS, SAE International, Oct. 2012. http://standards.sae.org/ams5596k/.
40. W. Kurz, C. Bezencon, and M. Gaumann: Sci. Technol. Adv. Mater., 2001, vol. 2, pp. 185-91.
41. J.M. Vitek: Acta Mater., 2005, vol. 53, pp. 53-67.
42. J.-W. Park, J.M. Vitek, S.S. Babu, and S.A. David: Sci. Technol. Weld. Join., 2004, vol. 9, pp. 472-82.
43. T.D. Anderson and J.N. DuPont: Weld. J., 2011, vol. 90, pp. 27s-31s.
44. C.A. Schneider, W.S. Rasband, and K.W. Eliceiri: Nat. Methods, 2012, vol. 9, pp. 671-75.
45. R. Rosenthal and D.R.F. West: Mater. Sci. Technol., 1999, vol. 15, pp. 1387-94.
46. S.S. Babu: Int. Mater. Rev., 2009, vol. 54, pp. 333-67.
47. R. Nakkalil, N.L. Richards, and M.C. Chaturvedi: Metall. Trans. A, 1993, vol. 24A, pp. 1169-79.
48. S.M. Seo, J.H. Lee, Y.S. Yoo, C.Y. Jo, H. Miyahara, and K. Ogi: Metall. Mater. Trans. A, 2011, vol. 42A, pp. 3150-59.
49. O.A. Ojo, N.L. Richards, and M.C. Chaturvedi: Metall. Mater. Trans. A, 2006, vol. 37A, pp. 421-33.
50. B. Radhakrishan and R.G. Thompson: Metall. Trans. A, 1991, vol. 22A, pp. 887-902.
51. O.A. Ojo and F. Tancret: Computat. Mater. Sci., 2009, vol. 45, pp. 388-89.