Modeling and simulation of mechanical micro-machining - A review

Machining Science and Technology

Volumn 18, Issue 3, 2014, Pages 323-347

  Anand, Ravi Shankar ^a   Patra, Karali ^b  

^a BIRLA INSTITUTE OF TECHNOLOGY   (India)

^b INDIAN INSTITUTE OF TECHNOLOGY PATNA   (India)

Author keywords

finite element method; mechanical micro machining; mechanistic modelling; molecular dynamics simulation; multi scale simulation

Indexed keywords

FINITE ELEMENT METHOD; MICROMACHINING; MOLECULAR DYNAMICS;

CUTTING MECHANISMS; MECHANICAL MICRO-MACHINING; MECHANISTIC MODELING; MINIMUM CHIP THICKNESS; MODEL AND SIMULATION; MODELING AND SIMULATION TECHNIQUES; MOLECULAR DYNAMICS SIMULATIONS; MULTI-SCALE SIMULATION;

COMPUTER SIMULATION;

EID: 84905436096     PISSN: 10910344     EISSN: 15322483     Source Type: Journal    
DOI: 10.1080/10910344.2014.925377     Document Type: Review

References (63)

1. Afazov, S.M.; Ratchev, S.M.; Segal, J. (2010) Modeling and simulation of micro-milling cutting forces. Journal of Materials Processing Technology, 210: 2154-2162.
2. Altintas, Y.; Jin, X. (2011) Mechanics of micro-milling with round edge tools. CIRP Annals - Manufacturing Technology, 60: 77-80.
3. Aly, M.F.; Ng, E.; Veldhuis, S.C. (2004) Cutting force prediction using a molecular dynamic assisted finite element simulation model. Proceedings of the 19th Annual Meeting of American Society for Precision Engineers, Orlando, FL.
4. Aramcharoen, A.; Mativeng, P.T. (2009) Size effect and tool geometry in micromilling of tool steel. Precision Engineering, 33: 402-407.
5. Bao, W.Y.; Tansel, I.N. (2000) Modeling micro-end-milling operations. Part I: Analytical cutting force model. International Journal of Machine Tools & Manufacture, 40: 2155-2173.
6. Bissacco, G.; Hansen, H.N.; Slunsky, J. (2008) Modelling the cutting edge radius size effect for force prediction in micro-milling. CIRP Annals - Manufacturing Technology, 57: 113-116.
7. Cai, M.B.; Li, X.P.; Rahman, M. (2007) Study of the mechanism of nanoscale ductile mode cutting of silicon using molecular dynamics simulation. International Journal of Machine Tools & Manufacture, 47: 75-80.
8. Chae, J.; Park, S.S.; Freiheit, T. (2006) Investigation of micro-cutting operations. International Journal of Machine Tools & Manufacture, 46: 313-332.
9. Chuzhoy, L.; DeVor, R.E.; Kapoor, S.G.; Beaudoin, A.J.; Bammann, D.J. (2003) Machining simulation of ductile iron and its constituents, Part 1: Estimation of material model parameters and their validation. Journal of Manufacturing Science and Engineering, 125: 181-191.
10. Dickerhof, M. (2011) Paving the ground for the next generation of micro nano enabled products in europe. Micro and NanoManufacturing Position Paper, Chap.2.
11. Dornfeld, D.; Min, S.; Takeuchi, Y. (2006) Recent advances in mechanical micro-machining. Annals of the CIRP, 55: 745-768.
12. Dow, T.A.; Scattergood, R.O. (2003) Mesoscale and microscale manufacturing processes: challenges for materials, fabrication and metrology. Winter Topical Meeting, 28: 14-19.
13. Ducobu, F.; Filippi, E.; Rivière, L. (2009) Chip formation and minimum chip thickness in micro-milling. Proceedings of the 12th CIRP Conference on Modeling of Machining Operations, 339-346.
14. Fang, F.Z.; Wu, H.; Shaw, K.C.; Pei, Q.X. (2008) Machining mechanism and molecular dynamics simulation in nanometric fabrication. Simtech Technical Reports, 9: 200-204.
15. Filiz, S.; Ozdoganlar, O.B. (2010) A model for bending, torsional, and axial vibrations of microand macro-drills including actual drill geometry- part1: model development and numerical solution. Journal of Manufacturing Science and Engineering, 132: 041017-1-8.
16. Frazier, A.B.; Gale, B.K.; Papautsky, I. (1997) Micromachined metallic pipettes and bioanalysis systems. Proc. in International Symposium on Mechatronics and Human Science, pp. 5-12.
17. Gentili, E.; Tabaglio, L.; Aggogeri, F. (2005) Review on micro-machining techniques. Advance Manufacturing System and Technology, pp. 387-396.
18. Ghoniem, N.M.; Busso, E.P.; Kioussis, N.; Huang, H. (2003) Multi-scale modelling of nanomechanics and micromechanics: an overview. Philosophical Magazine, 83: 3475-3528.
19. Gong, Y.; Ehmann, K.F.; Lin, C. (2003) Analysis of dynamic characteristics of micro-drills. Journal of Materials Processing Technology, 141: 16-28.
20. Heamawatanachai, S.; Bamberg, E. (2010) Cutting force model of orbital single-point micro-machining tool. International Journal of Machine Tools & Manufacture, 50: 815-823.
21. Hinds, B.K.; Treanor, G.M. (2000) Analysis of stresses in micro-drills using the finite element method. International Journal of Machine Tools & Manufacture, 40: 1443-1456.
22. Hsu, T. (2008) MEMS and Microsystems: Design, Manufacture, and Nanoscale Engineering, 2nd Edition, John Wiley & Sons, New York.
23. Huang, B.W. (2004) The drilling vibration behavior of a twisted microdrill. Journal of Manufacturing Science and Engineering, 126: 719-726.
24. Huang, B.W.; Yu, P.P.; Kuang, J. (2010) Using finite element analysis on dynamic characteristics in a micro stepping mill. World Academy of Science, Engineering and Technology, 70: 718-722.
25. Huo, D.; Cheng, K.;Wardle, F. (2010) Design of a 5-Axis ultraprecision micro-milling machine-ultramill: Part 1: holistic design approach, design considerations, and specifications. International Journal of Advanced Manufacturing Technology, 47: 867-877.
26. Ikawa, N.; Shimada, S.; Tanaka, H. (1992) Minimum thickness of cut in micro-machining. Nanotechnology, 3: 6-9.
27. Jang, H.S.; Park, D.S. (2010) Microfabrication of microchannels for fuel cell plates. Sensors, 10: 167-175.
28. Jun, M.B.G.; Goo C.; Malekian, M.; Park, S. (2012) A new mechanistic approach for micro-end milling force modeling. Journal of Manufacturing Science and Engineering, 134: 011006-1-011006-9.
29. Kang, I.S.; Kim J.S.; Kim, J.H.; Kang, M.C.; Seo, Y.W. (2007) A mechanistic model of cutting force in the micro-end milling process. Journal of Materials Processing Technology, 187-188: 250-255.
30. Kang, K.; Cai, W. (2007) Brittle and ductile fracture of semiconductor nanowires - Molecular dynamics simulations. Philosophical Magazine, 87: 2169-2189.
31. Kim, C.; Bono, M.; Ni, J. (2002) Experimental analysis of chip formation in micro-milling. NAMRI/SME, 30: 247-254.
32. Kim, J.D.; Kim, D.S. (1995) Theoretical analysis of micro-cutting characteristics in ultra-precision machining. Journal of Materials Processing Technology, 49: 387-398.
33. Ko, J.H.; Heisel, U. (2007) Mechanistic cutting force model for micro-ball-end milling. Proceedings of the 2nd International Conference on Micro Manufacturing, Greenville, SC, 10-13 September, 31-36.
34. Koc, M.; Özel, T. (2011) Micro-Manufacturing: Design and Manufacturing of Micro-Products, 1st ed., John Wiley & Sons, New York.
35. Lai, X.; Li, H.; Li, C.; Lin, Z.; Jun, N. (2008) Modeling and analysis of micro-scale milling considering size effect, micro-cutter edge radius and minimum chip thickness. International Journal of Machine Tools & Manufacture, 48: 1-14.
36. Li, X.; Yu H.; Xu, J.; Liu, A.; Lv, H. (2009) Model of micro-cutting and analysis of micro-cutting force. Proceedings of the IEEE International Conference on Mechatronics and Automation, Changchun, China, 9-12 August, 1541-1545.
37. Liow, J.L. (2009) Mechanical micro-machining: A sustainable micro-device manufacturing approach? Journal of Cleaner Production, 17: 662-667.
38. Liu, K. (2005) Process modeling of micro-cutting including strain gradient effects. PhD thesis, George W. Woodruff School of Mechanical Engineering: Georgia Institute of Technology, Atlanta, GA.
39. Liu, K.; Melkote, S. N. (2007) Finite element analysis of the influence of tool edge radius on size effect in orthogonal micro-cutting process. International Journal of Mechanical Sciences, 49: 650-660.
40. Liu, X.; DeVor, R.E.; Kapoor, S.G.; Ehmann, K.F. (2004) The mechanics of machining at the micro-scale: assessment of the current state of the science. Journal of Manufacturing Science and Engineering, 126: 666-678.
41. Lucca, D.A.; Seo Y.W.; Komanduri, R. (1993) Effect of tool edge geometry on energy dissipation in ultraprecision machining. Annals of the CIRP, 42(1): 83-86.
42. Malekian, M.; Park, S.S.; Jun, M.B.G. (2009) Modeling of dynamic micro-milling cutting forces. International Journal of Machine Tools & Manufacture, 49: 586-598.
43. Oluwajobi, A.; Chen, X. (2011) The effect of interatomic potentials on the molecular dynamics simulation of nanometric machining. International Journal of Automation and Computing, 8(3): 326-332.
44. Otieno, A.; Mirman, C. (2008) Finite element analysis of cutting forces and temperatures on microtools in the micro-machining of aluminum alloys. Proceedings of the IAJC-IJME International Conference, Nashville, TN, November.
45. Özel, T.; Liu, X.; Dhanorker A. (2007) Modelling and Simulation of Micro-Milling process. Proceedings of the Fourth International Conference and Exhibition on design and production of machines and Dies/Molds. Cesme, Turkey, June.
46. Park, S.; Kapoor, S.G.; DeVor, R.E. (2004) Mechanistic cutting process calibration via micro-structurelevel finite element simulation model. Journal of Manufacturing Science and Engineering, 126: 706-709.
47. Park, S.S.; Malekian, M. (2009) Mechanistic modeling and accurate measurement of micro-end milling forces. CIRP Annals - Manufacturing Technology, 58: 49-52.
48. Pei, Q.X.; Lu, C.; Lee, H.P.; Zhang, Y.W. (2009) Study of materials deformation in nanometric cutting by large-scale molecular dynamics simulations. Nanoscale Research Letters, 4: 444-451.
49. Promyoo, R.; El-Mounayri, H.; Yang, X. (2010) Molecular dynamics simulation of nanometric cutting. Machining Science and Technology, 14: 423-439.
50. Rudd, R.E. (2001) Modeling of embedded nanomechanics. Materials Research Society Spring Meeting, San Francisco, CA, 16-20 April.
51. Shiaria, B.; Millera, R.E.; Klug, D.D. (2007) Multi-scale simulation of material removal processes at the nanoscale. Journal of the Mechanics and Physics of Solids, 55: 2384-2405.
52. Sun, X.; Chen, S.; Cheng, K.; Huo, D.; Chu, W. (2006) Multi-scale simulation on nanometric cutting of single crystal. Journal of Engineering Manufacture, 220: 1217-1222.
53. Sun, X.; Cheng, K. (2010) Multi-scale simulation of the nano-metric cutting process. International Journal of Advanced Manufacturing Technology, 47: 891-901.
54. Sun, Y.; Liang, Y.; Du, R. (2006) Simulation and analysis of surface generation in micro-milling. Proceedings of the 6th WSEAS International Conference on Robotics, Control and Manufacturing Technology, Hangzhou, China, April, 30-35.
55. Vogler, M.P.; DeVor, R.E.; Kapoor, S.G. (2003) Micro-structure-level force prediction model for micromilling of multi-phase materials. Journal of Manufacturing Science and Engineering, 125: 202-209.
56. Vogler, M.P.; DeVor, R.E.; Kapoor, S.G. (2004a) On the modeling and analysis of machining performance in micro-endmilling, Part I: surface generation. Journal of Manufacturing Science and Engineering, 126: 685-694.
57. Vogler, M.P.; Kapoor, S.G.; DeVor, R.E. (2004b) On the modeling and analysis of machining performance in micro-endmilling, Part II: cutting force prediction. Journal of Manufacturing Science and Engineering, 126: 695-705.
58. Weber, M.; Hochrainer, T.; Gumbsch, P.; Autenrieth, H.; Delonnoy, L.; Schulze, V.; Löhe, D.; Kotschenreuther, J.; Fleischer, J. (2007) Investigation of size-effects in machining with geometrically defined cutting edges. Machining Science and Technology, 11:4, 447-473.
59. Wu, J.; Liu, Z. (2010) Modeling of flow stress in orthogonalmicro-cutting process based on strain gradient plasticity theory. International Journal Advance Manufacturing Technology, 46: 143-149.
60. Yi, Q.; Brockett, A.; Ma, Y.; Razali, A.; Zhao J.; Harrison C.; Pan W.; Dai X.; Loziak D. (2010) Micromanufacturing: research, technology outcomes and development issues. International Journal Advance Manufacturing Technology, 47: 821-837.
61. Yongchen, P.; Qingchang, T.; Zhaojun, Y. (2006) A study of dynamic stresses in micro-drills under high-speed machining. International Journal of Machine Tools & Manufacture, 46: 1892-1900.
62. Zhang, Z.; Babitsky, V.I. (2011) Finite element modeling of a micro-drill and experiments on high speed ultrasonically assisted micro-drilling. Journal of Sound and Vibration, 330: 2124-2137.
63. Zhou, M.; Ngoi, K.A.; Yeo, S.H. (1999) Effect of workpiece material properties on microcutting process. Proceeding 1st International Conference and General Meeting of the European Society for Precision Engineering and Nanotechnology, Bremen, Germany, 404-407.