Multi-criteria end milling parameters optimization of AISI D2 steel using genetic algorithm

International Journal of Advanced Manufacturing Technology

Volumn 73, Issue 5-8, 2014, Pages 1201-1212

  Alrashdan, Abdalla ^a   Bataineh, Omar ^a   Shbool, Mohammad ^a  

^a JORDAN UNIVERSITY OF SCIENCE AND TECHNOLOGY   (Jordan)

Author keywords

AISI D2 steel; End milling; Energy consumption; Genetic algorithm; Surface roughness

Indexed keywords

ALGORITHMS; COST FUNCTIONS; COSTS; ENERGY UTILIZATION; MACHINING CENTERS; MILLING (MACHINING); OPTIMAL SYSTEMS; REGRESSION ANALYSIS; SURFACE ROUGHNESS;

AISI D2; CONVENTIONAL MANUFACTURING; ELECTRICAL DISCHARGE MACHINING; ELECTRICAL ENERGY CONSUMPTION; ELECTRICAL ENERGY COSTS; END MILLING; MULTICRITERIA OPTIMIZATION; OPTIMAL MACHINING PARAMETERS;

GENETIC ALGORITHMS;

EID: 84905094634     PISSN: 02683768     EISSN: 14333015     Source Type: Journal    
DOI: 10.1007/s00170-014-5921-5     Document Type: Article

References (33)

1. Dewes R, Aspinwall D (1997) A review of ultra high speed milling of hardened steels. J Mater Process Technol 69:1-17 (Pubitemid 127675790)
2. Baskar N, Asokan P, Saravanan R, Prabhaharan G (2006) Selection of optimal machining parameters for multi-tool milling operations using a memetic algorithm. J Mater Process Technol 174:239-249
3. Cakir M, Ensarioglu C, Demirayak I (2009) Mathematical modeling of surface roughness for evaluating the effects of cutting parameters and coating material. J Mater Process Technol 209:102-109
4. Yusup N, Zain A, Hashim S (2012) Evolutionary techniques in optimizing machining parameters: review and recent applications. Expert Syst Appl 39:9909-9927
5. Vivancos J, Luis C, Costa L, Ortiz J (2004) Optimal machining parameters selection in high speed milling of hardened steels for injection moulds. J Mater Process Technol 155-156:1505-1512
6. Ktem H, Erzurumlu T, Kurtaran H (2005) Application of response surface methodology in the optimization of cutting conditions for surface roughness. J Mater Process Technol 170:11-16 (Pubitemid 41526145)
7. Yildiz A (2009) A novel hybrid immune algorithm for optimizing of machining parameters in milling operations. Robot Comput Integr Manuf 25:261-270
8. Zain A, Haron H, Sharif S (2010) Prediction of surface roughness in the end milling machine using Artificial Neural Network. Expert Syst Appl 37:1755-1768
9. Huang B, Chen J (2003) An in-process neural network-based surface roughness prediction (INN-SRP) system using a dynamometer in end milling operations. Int J Adv Manuf Technol 21:339-347
10. Benardos P, Vosnaikos G (2003) Predicting surface roughness in machining: a review. Int J Mach Tools Manuf 43:833-844
11. Rashid A, Gan S, Muhammad N (2009) Mathematical modeling to predict surface roughness in CNC milling. World Acad Sci Eng Technol 53:393-396
12. Ozcelik B, Bayramoglu M (2006) The statistical modeling of surface roughness in high-speed flat end milling. Int J Mach Tools Manuf 46:1395-1402 (Pubitemid 44119146)
13. Ghani J, Choudhury I, Hassan H (2004) Application of Taguchi method in the optimization of end milling parameters. J Mater Process Technol 145:84-92
14. Vivancos J, Luis C, Ortiz H (2005) Analysis of factors affecting the high-speed side milling of hardened die steels. J Mater Process Technol 162-163:696-701 (Pubitemid 40584455)
15. Park C, Kown K, Kim W, Min B, Park S, Sung I, Yoon Y, Lee K, Lee J, Seok J (2009) Energy consumption reduction technology in manufacturing - a selective review of policies standards and research. Int J Precis Eng Manuf 10(5):151-173
16. Pineda-Henson R, Culaba A (2004) A diagnostic model for green productivity assessment of manufacturing processes. Int J LCA 9(6):379-386 (Pubitemid 39452574)
17. He LB, Zhang X, Gao H, Liu X (2012) A modeling method of task-oriented energy consumption for machining manufacturing system. J Clean Prod 23(1):167-174
18. Rahimifard S, Seow Y, Childs T (2010) Minimising embodied product energy to support energy efficient manufacturing. CIRP Ann 59(1):25-28
19. Fang K, Uhan N, Zaho F, Sutherland J (2011) A new approach to scheduling in manufacturing for power consumption and carbon footprint reduction. J Manuf Syst 30(4):234-240
20. Kara S, Li W (2011) Unit process energy consumption models for material removal processes. CIRP Annals-Manuf Technol 60:37-40
21. Newman S, Nassehi A, Imani-Asrai R, Dhokia V (2012) Energy efficient process planning for CNC machining. CIRP J Manuf Sci Technol 5:127-136
22. Bhushan R (2013) Optimization of cutting parameters for minimizing power consumption and maximizing tool life during machining of Al alloy SiC particle composites. J Clean Prod 39:242-254
23. Zain A, Haron H, Sharif S (2010) Application of GA to optimize cutting conditions for minimizing surface roughness in end milling machining process. Expert Syst Appl 37:4650-4659
24. Saffar R, Razfar R (2010) Simulation of end milling operation for predicting cutting forces to minimize tool deflection by genetic algorithm. Mach Sci Technol 14(1):81-101
25. Parent L, Songmene V, Kenné J (2007) A generalised model for optimising an end milling operation. Prod Plan Control 18(4):319-337 (Pubitemid 46788956)
26. Sultana I, Dhar N (2010) GA based multi objective optimization of the predicted models of cutting temperature, chip reduction co-efficient and surface roughness in turning AISI 4320 steel by uncoated carbide insert under HPC condition. Proceedings of the 2010 International Conference on Mechanical. Ind Manuf Technol MIMT 2010:161-167
27. Duran O, Barrientos R, Consalter L (2007) Multi objective optimization in machining operations. Analysis and Design of Intelligent Systems using Soft Computing Techniques 455-462
28. Xie S, Pan L (2010) Selection of machining parameters using genetic algorithms. ICCSE 2010 - 5th International Conference on Computer Science and Education, Final Program and Book of Abstracts 1147-1150
29. Kilickap E, Huseyinoglu M, Yardimeden A (2011) Optimization of drilling parameters on surface roughness in drilling of AISI 1045 using response surface methodology and genetic algorithm. Int J Adv Manuf Technol 52(1-4):79-88
30. Jain N, Jain V (2007) Optimization of electro-chemical machining process parameters using genetic algorithms. Mach Sci Technol 11(2):235-258 (Pubitemid 46828408)
31. Mohanasundararaju N, Sivasubramanian R, Alagumurthi N (2008) Optimisation of work roll grinding using response surface methodology and evolutionary algorithm. Int J Manuf Res 3(2):236-251 (Pubitemid 351385712)
32. Gao Q, Zhang Q, Su S, Zhang J (2008) Parameter optimization model in electrical discharge machining process. J Zhejiang Univ Sci A 9(1):104-108
33. Kumar A, Khan M, Thiraviam R, Sornakumar T (2006) Machining parameters optimization for Alumina based ceramic cutting tools using genetic algorithm. Mach Sci Technol 10:471-489 (Pubitemid 44837692)