A review of ultra high speed milling of hardened steels

Journal of Materials Processing Technology

Volumn 69, Issue 1-3, 1997, Pages 1-17

  Dewes, R C ^a   Aspinwall, D K ^a  

^a NONE

Author keywords

[No Author keywords available]

Indexed keywords

CERAMIC MATERIALS; CERMETS; CUBIC BORON NITRIDE; CUTTING TOOLS; HARDNESS; MACHINABILITY; TOOL STEEL; TUNGSTEN CARBIDE;

HIGH SPEED MACHINING;

MILLING (MACHINING);

EID: 0031232958     PISSN: 09240136     EISSN: None     Source Type: Journal    
DOI: 10.1016/S0924-0136(96)00042-8     Document Type: Article

References (140)

1. C. Salomon, Verfahren zur bearbeitung von metallen oder bei einer bearbeitung durch schneidende Werkzeuge sich ähnlich verhaltenden Werkstoffen (Process for the machining of metals or similarly acting materials when being worked by cutting tools), German Patent no. 523594, 1931, 4 p.
2. F.J. McGee, High-speed machining-study: methods for aluminium workpieces, Am. Mach. 123 (3) (1979) 121-126.
3. H. Schulz, Hochgeschwindigkeitsfräsen metallischer und nichtmetallischer werkstoffe. Carl Hanser Verlag, ISBN 3446155899, 1989, 348 p.
4. J. Scherer, The technology of high-speed milling of various aluminium alloys, in: Tagungshandbuch (Handbook) 4, Darmstadter Fertigungstechniches Symp. (Manufacturing Eng. Symposium), TH Darmstadt, Germany, 1989.
5. F.J. McGee, High-speed machining of aluminium alloys, in: High Speed Machining, the Winter Annual Meeting of the ASME, New Orleans, LA. USA, PED, vol. 12, 1984, pp. 205-216.
6. F.J. McGee, Final technical report for manufacturing methods for high speed machining of aluminium. Submitted by Vought Corporation, MI, USA, in Response to Technical Requirement Number 6089, Manufacturing Methods and Technology Branch (DRDMI-EAT), US Army Missile Research and Development Command, Redstone Arsenal, AL, USA, 1978.
7. B. Ashley, High speed machining - The kindest cut of all, Aluminium Industry, 1992.
8. I. Nieminen, J. Paro, V. Kauppinen, High-speed milling of advanced materials, in: Proc. Int. Conf. Advances in Materials and Processing Technologies, Dublin, Ireland, 1993, pp. 21-32.
9. M. Greif, Hochgeschwindigkeitsfräsen von kupferknetlegierungen. Hochgeschwindig-keitsfräsen von Metallischen und Nichtmetallischen Werkstoffen, Haus der Technik Vortragsveröffentlichungen, Essen, Germany, vol. 539, Vulcan Verlag, 1988, pp. 18-21.
10. W. Steif, Hochgeschwindigkeitsfräsen von graphit (High speed milling of graphite), Ind. Diamond Rev. 86 (2) (1986) 587-590.
11. R.S. Hansen, F.O. Rasch, High speed machining of magnesium castings, in: Proc. Conf. Magnesium Alloys and their Applications, Garmisch Partenkirchen, Germany, ISBN 3883551848, vol. 68, 1992, pp. 61-68.
12. D. Kümmel, Hochgeschwindigkeitszerspanung von gußeisen. Hochgeschwindig-keitsfräsen von Metallischen und Nichtmetallischen Werkstoffen, Haus der Technik - Vortragsveröffentlichungen, Essen, Germany, vol. 539, Vulcan Verlag, 1988, pp. 27-31.
13. M. Eckstein, G. Lebküchner, D. Blum, Schattfräsen von titanlegierungen mit hohen schnittgeschwindigkeiten - Teil I: Schruppen (End milling of titanium alloys using high cutting speeds - Part I: Rough machining), VDI-Z 133 (12) (1991) 28-34.
14. M. Eckstein, G. Lebküchner, D. Blum, Schattfräsen von titanlegierungen mit hohen schnittgeschwindigkeiten - Teil 2: Schlichten (End milling of titanium alloys using high cutting speeds - Part 2: Finish machining), VDI-Z 134 (6) (1992) 61-67.
15. K. Maekawa, I. Ohshima, Y. Nakano, High speed end milling of Ti-6Al-6V-2Sn titanium alloy. Advancement of Intelligent Production, 7th int. Conf. Production/Precision Engineering and 4th Int. Conf. High Technology, Chiba, Japan, 1994, pp. 431-436.
16. E.O. Ezugwu, I.R. Pashby, High speed milling of nickel-based superalloys, J. Mater. Process. Technol. 33 (4) (1992) 429-437.
17. W. Flamme, T. Prefi, S. Rhiem, High-speed cutting of brass, Metall 46 (11) (1992) 1127-1129.
18. P. Dennis, Machining fibre-reinforced plastics, Ind. Diamond Rev. 91 (6) (1991) 288-291.
19. E. Westkämper, M. Fuss, High-speed milling of wood composites with PCD, Ind. Diamond Rev. 93 (3) (1993) 150-153.
20. Y. Destombes, Very high speed machining of ferrous and solid composite materials: Test campaign results, in: High Speed Machining, the Winter Annual Meeting of ASME, New Orleans, LA, USA, PED, vol. 12, 1984, pp. 263-286.
21. J. Chaplin, J.A. Miller, R.I. King, Summary of recent Lockheed research re: high-speed machining, in: Proc. 9th North American Manufacturing Research Conference (NAMRC), Pennsylvania, PA, USA, 1981, pp. 311-317.
22. M. Harding, Get a grip on high speed machining, Metalworking Prod. 137 (6) (1993) 33-34.
23. H. Schulz, T. Moriwaki, High-speed machining, Ann. CIRP 41 (2) (1992) 637-643.
24. G.T. Smith, Ultra-high speed machining the problems associated with spindle designs, tooling and machined parts when milling, in: Proc. 2nd Int. Conf. Flexible Automation and Information Management (FAIM), Falls Church, VA, USA, 1992, pp. 947-961.
25. K. Nakayama, M. Ogawa, Burr formation in metal cutting, Ann. CIRP 36 (1) (1987) 33-36.
26. B.M. Kramer, On tool materials for high speed machining, J. Eng. Ind. (Trans. ASME) 109 (2) (1984) 87-91.
27. D. L. Lewis, Factors for successful rotating tool operation at hi-speeds, SME High Speed Machining Clinic, Oak Brook. IL, USA, 1992, 19 p.
28. Society of British Aerospace Companies Ltd., London, UK. The repercussions of high speed machining. Study Team Report, 1992, 45 p.
29. J. Gough, High speed machining for toolmaking applications. Precision Toolmaker, 8 (3) (1990) 154 and 157.
30. A. Allcock, Fast-moving metal removal sets the pace. Machinery and Production Engineering 152 (3883) (1994) 43-48.
31. Personal communication with the Gauge and Toolmakers Association (GTMA), Princes Risborough, UK, 13 June, 1995.
32. J.D. Destefani, Mold and die making in transition. Tooling Prod. (April) (1993) 69-71.
33. ASM International, Selection of materials for molds for plastics and rubbers, in: ASM Metals Handbook. 9th edn, vol. 3 - Properties and Selection: Stainless Steels, Tool Materials and Special-Purpose Metals, 1980 pp. 546-550.
34. ASM International, Dies and die materials for hot forging, in: Forming and Forging. ASM Metals Handbook, 9th edn, vol. 14, 1988 pp. 43-58.
35. ASM International, Machining of tool steels, in: Machining, ASM Metals Handbook, 9th edn, vol. 16, 1989 pp. 708-732.
36. ASM International, Worldwide guide to equivalent irons and steels, in: Materials Data Series, 3rd edn, ISBN 0871704544, 1993.
37. Machinability Data Center, Machining Data Handbook. 3rd edn, Vol. 2, ISBN 0936974001, Metcut Research Associates Inc., Cincinnati, OH, USA, 1980.
38. H.K. Tönshoff, W. Bussmann, C. Stanske. Requirements on tools and machines when machining hard materials, in: Proc. 26th Int. Machine Tool Design and Research (MTDR) Conf., 1986, pp. 349-357.
39. A.M. Abrão, D.K. Aspinwall, M.L.H. Wise, Tool life and workpiece surface integrity evaluations when machining hardened AISI H13 and AISI E52100 steels with conventional ceramic and PCBN tool materials. S.M.E. Technical Paper. number MR95-159, 1995, 9 p.
40. A.M. Abrão, D.K. Aspinwall, M.L.H. Wise, A review of polycrystalline cubic boron nitride cutting tool developments and application, in: Proc. 30th Int. Matador Conference, Manchester, UK, 1993 pp. 169-180.
41. Sandvik Coromant, Turning with ceramics, C-1000:238-ENG (1989).
42. P.K. Bossom, Finish machining of hard ferrous workpieces, Ind. Diamond Rev. 5 (90) (1990) 228-232.
43. K. Raghavan, Facemilling of hardened die steel using CBN tooling. MSc. Project Report, Graduate School of Machine Tool and Manufacturing Technology, Department of Mechanical Engineering, University of Birmingham, UK, 1985, 69 p.
44. P.J. Heath, Ultrahard tool materials, in: Machining, ASM Metals Handbook, 9th edn. vol. 16, 1987 pp. 105-117.
45. W. König, R. Komanduri, H.K. Tönshoff, G. Ackershott. Machining of hard materials. Ann. CIRP 33 (2) (1984) 417-427.
46. W. König, M. Hoff, Vollbohren harter stahl- und gußwerkstoffe, Industrie Anzeiger 92 (16 November) (1984) 50-51.
47. W. König, M. Iding, R. Link. Fine turning and drilling hardened steels - 2, Ind. Diamond Rev. 3 (90) (1990) 139-142
48. W. König, M. Klinger, R. Link, Machining hard materials with geometrically defined cutting edges -Field of applications and limitations, Ann. CIRP 39 (1) (1990) 61-69.
49. W. Chen, X. Chang, G. Zhong. Z. Gu, D.K. Aspinwall. High speed machining of hardened steel using CBN tipped rotary cutting tools, in: Proc. 11th Int. Conf. Production Research (ICPR), Hefei, China, 1991, pp. 23-27.
50. H. Schulz, T. Kneisel, Turn-milling of hardened steel - An alternative to turning, Ann. CIRP 43 (1) (1994) 93-96.
51. L. Hassvik, Uddehoun informs about electrical discharge machining of tool steel, Uddeholm Research Centre. Sweden, 10 p.
52. W. Kortmann, U. Walkenhorst, Electrical discharge machining (EDM) of tool steels and hard tool materials, Thyssen Edelst. Techn. Ber. (1983) 101-111
53. T. Altan, B.W. Lilly, J.P. Kruth, W. König, H.K. Tönshoff, C.A. Van Lutterveit, A.B. Khairy, Advanced techniques for die and mold manufacturing, Ann. CIRP 42 (2) (1993) 707-716.
54. A.B. Khairy, Post-finishing of electrodischarge machined surfaces by electrochemical machining, in: Trans. North American Manufacturing Research Institution (NAMRI) of SME, Evanston, IL, USA, vol. 22, 1994, pp. 99-103.
55. L.C. Lee, L.C. Lim, V. Narayanan, V.C. Venkatesh, Quantification of surface damage of tool steels after EDM, Int. J. Mach. Tools Manuf. 28 (4) (1988) 359-372.
56. J. Wallbank, Effect of EDM on material properties of die steels, Metallurgia (July) (1980) 356-362.
57. I. Ogata, Y. Mukoyama, Residual stress on surface machined by wire electric discharge, Int. J. Jpn Soc. Prec. Eng. 25 (4) (1991) 273-278.
58. J.E. Mayer, Jr. High speed machining from tool material standpoint, in: High Speed Machining, the Winter Annual Meeting of ASME, New Orleans, LA, USA, PED, vol. 12, 1984 pp. 465-468.
59. B. Mills, Recent developments in cutting tool materials, in: Proceedings of the International Conference on Advances in Materials and Processing Technologies, Dublin, Ireland, 1993, pp. 1-8.
60. B. Roebuck, Technologies and Markets for Cutting Tool Materials, National Physical Laboratory (NPL), Teddington, UK. 1994, 50 p.
61. A.M. Abrão, The machining of annealed and hardened steels using advanced ceramic cutting tools, PhD Thesis, School of Manufacturing and Mechanical Engineering, University of Birmingham, 1995, 241 p.
62. Sandvik Coromant (UK) Ltd, Halesowen, UK. Rotating Tools. Catalogue C-S100:4-ENG, 1994, 584 p.
63. Seco Tools (UK) Ltd., Alcester, UK. Seco-guide Milling. 1989, 87 p.
64. Iscar Ltd., Birmingham, UK. News Line (1) (1994) 24 p.
65. Stellram, Melksham, UK. Price List, 1995, 437 p.
66. Beaumont Machine Tools Ltd, Matsuura Machining Centre FX Series High Speed Cutting M80 Programming Manual, Beaumont Machine Tools Ltd, Coalville, UK, 1992.
67. H. Schulz, High speed machining-Some of the latest developments, Metalworking World (Sandvik Coromant) 3 (1994) 32-36.
68. Sumitomo Electric Hardmetal Ltd., High performance cutting tools. Catalogue no. UKGCAT-001(1992.03), Sumitomo Electric Hardmetal Ltd., Princes Risborough, UK, 1992.
69. K. Gieck, R. Gieck, A collection of technical formulae. 7th English edn., Gieck-Verlag, Germany, ISBN 3920379209, 1990, pp. 11-12.
70. Sandvik Coromant, Modern Metal Cutting, 1st edn., Sandvik Coromant, Halesowen, UK, ISBN 9197229903, 1994.
71. L. Kops, D.T. Vo, Determination of the equivalent diameter of an end mill based on its compliance, Ann. CIRP 39 (1) (1990) 93-96.
72. Sandvik Coromant (UK) Ltd, New rotating tools. Catalogue C-1100:404-ENG, vol. 94.3, Sandvik Coromant (UK) Ltd., Haelsowen, UK, 1995, 34 p
73. Kobelco Cutting Tool Division, Shaping the future, in: Catalogue for the 17th Japan Int. Machine Tool Fair, Osaka, Japan, Kobe Steel Ltd., Tokyo, Japan, 1994.
74. OSG Manufacturing Company, Micro-grain Solid Tungsten Carbide End Mills, OSG Manufacturing Company, Japan, 1987.
75. Hertel AG, Solid Carbide End Mills. Catalogue 402, Hertel AG, Furth, Germany, 1991.
76. P. Madhusudhan, S.N. Bhat, R. Srinivasan, Ultra fine grain carbide properties and application, in: Proc. 14th All India Machine Tool Design and Research Conference, Bombay, India, 1990, pp. 333-338.
77. K.J.A. Brookes, World Directory and Handbook of Hardmetals and Hard Materials, 5th edn, International Carbide Data, UK, ISBN 0950899526, 1992.
78. J.L. Hunt, A.T. Santhanam, Coated carbide metalcutting tools: Development and applications, in: Fundamental Issues in Machining, the Winter Annual Meeting of the ASME, Dallas, TX, USA, PED, vol. 43, ISBN 0791805670, 1990, pp. 139-155.
79. W.W. Gruss, Turning and milling of steel with cermet cutting tools, in: Proc. Conf. Advances in Tool Materials for Use in High Speed Machining, Scottsdale, AZ, USA, ISBN 0871702975, 1987 pp. 49-61.
80. H.K. Tönshoff, H.-G. Wobker, C. Cassel, Wear characteristics of cermet cutting tools, Ann. CIRP 43 (1) (1994) 89-92.
81. GUHRING Ltd., Birmingham, UK, A wind of change in milling techniques?, Modern Cutting Tools Technol. 13 (19) (1993) 8-16.
82. Hartmetall-Werkzeugfabrik Andreas Maier (HAM) GMBH, High performance cutting tools for drilling-countersinking-milling-sawing-reaming, Catalogue, Hartmetall-Werkzeugfabrik Andreas Maier (HAM) GMBH, Schwendi-Hörenhausen, Germany 1995.
83. S. Kim, Advanced ceramics as cutting tool materials: Part 1 - An overview, J. Can. Ceram. Soc. 61 (1) (1992) 51-58.
84. E.D. Whitney, P.N. Vaidyanathan, Engineered ceramics for high speed machining, in: Tool Materials for High-Speed Machining, Proc. Conf. Advances in Tool Materials for Use in High Speed Machining, Scottsdale, AZ, USA, ISBN 0871702975, 1987, pp. 77-82.
85. K.H. Smith, The application of whisker reinforced and phase transformation toughened materials in machining of hardened steels and nickel-based alloys, in: High Speed Machining: Solutions for Productivity, Proc. SCTE '89 Conference, San Diego, CA, USA, ISBN 087170367X, 1989, pp. 81-88.
86. D. Jack, Advanced ceramics as metal cutting tool materials, Chem. Ind. 19 (1986) 646-650.
87. E.M. Trent, Metal Cutting, 3rd edn, Butterworth-Heinemann, ISBN 0750610689, 1991, 245 p.
88. Kieninger Tooling Ltd., Price List, Kieninger Tooling Ltd., Penarth, UK., 1995, 48 p.
89. Y. Belin, PCD-CBN Catalogue, Dortan, France, 1995.
90. Advanced processes deposit high-tech materials, Am. Mach. 139 (3) (1995) 35-37.
91. A.T. Notter, P.J. Heath, The selection of machining parameters using Amborite, in: Advances in Ultra Hard Materials Application Technology, De Beers Industrial Diamond Division, Ascot, UK, vol. 1, 1982, pp. 81-91.
92. M. König, New technologies in milling (high speed milling, 3-and multi-axis machining, working of hardened parts), in: 7th International Conference of Tool, Die and Mold Industry International Special Tooling Association, Bergamo, Italy, 1992.
93. D. Aspinwall, Superhard tooling ten years on, Metalworking Prod. 128 (11) (1984) 90-98.
94. R.C. Dewes, D.K. Aspinwall, M.L.H. Wise, High speed machining - Cutting tools and machine requirements, in: Proc. 31st Int. Matador Conference, Manchester, UK, 1995, pp. 455-461.
95. Niigata Engineering Co Ltd., Machine Tools, High-tect in CNC, Catalogue for 8th EMO Exhibition, Hannover, Germany, Machinery Division, Tokyo, Japan. 1989.
96. J. Tlusty, High-speed machining, Ann. CIRP 42 (2) (1993) 733-738.
97. G.T. Smith, Design, development and CIM strategies, in: CNC Machining Technology, vol. 1, Springer Verlag, UK, 1993, 178 P.
98. E. Holland, Now IBAG's high speeds get even higher powers, Metalworking Prod. 133 (4) (1989) 59-62.
99. Integrated system automates high speed machining. Precision Toolmaker, 11 (5) (1993) 175.
100. Random Computing Ltd., CNC Machining - making the most of CAD/CAM, Random Computing Ltd., London, UK, 1993, 84 p.
101. T. Nakagawa, Emerging new technologies in the die and mould manufacturing industry in high speed rniiling, grinding and polishing, in: Proc. 7th Int. Conf. Tool, Die and Mold Industry, International Special Tooling Association, Bergamo, Italy, 1992, 3.5.
102. T. Ikeda, I. Takahashi, T. Matsuoka, T. Nakagawa, Ultra high speed milling of die steel with ball-nose endmill, in: Proc. 2nd Int. Conf. Die and Mould Technology (ICDMT), Singapore, 1992, pp. 48-56.
103. T. Nakagawa, T. Ikeda, T. Matsuoka, High speed milling of steel and tool life, in: Proc. 8th Int. Conf. Tool, Die and Mold Industry, International Special Tooling Association, Barcelona, Spain, 1995.
104. T. Majima, Development of ultra-high speed milling machine, in: Proc. 6th Int. Machine Tool Engineers Conference (IMEC), Osaka, Japan, 1994, pp. 61-83.
105. P. Bagard, Outils coupants, conditions de coupe et stratégies en usinage àgrande vitesse des outillages: Point de départ de la chaîne CFAO, in: Proc. Conf. Journées d'information: Usinage à grande vitesse des outillages, CETIM, Senlis, France, 1994.
106. P. Bagard, Bilans technico-économiques entre usinage à grande vitesse et usinage conventionnel, in: Proc. Conf. Journées d'information: Usinage à grande vitesse des outillages, CETIM, Senlis, France, 1994.
107. P. Bagard, J-C. Crapart, M. Palleau, M. Lefebvre, P. Padilla, Usinage à grande vitesse: Application aux outillages, in: Proc. Conf. Journées d'information: Usinage à grande vitesse des outillages, CETIM, Senlis, France, 1994.
108. P. Bagard, M. Palleau, On gagne à les usiner à grande vitesse, CETIM-Informations 142 (1995) 39-43.
109. S. Hock, Hochgeschwindigkeitsfräsen im Werkzeug- und formenbau, Tagungsband zum Darmstadter Bifahrungsforum Werkzeug- und Formenbau, Kortengunstigern Formen in Kurzerer Zeit, (March) (1995).
110. W. König, R. Bieker. NC-fräsbearbeitung vergüteten stahlhohlformen (NC-milling of dies in hardened condition), Industrie-Anzeiger 28 (1989) 23-26.
111. W. Eversheim, W. König, R. Bieker, M. Cobanoglu, NC-fräs-bearbeitung von vergüteten schmiedegesenken, VDI-Z 131 (4) (1989) 99-103.
112. W. König, M. König, CBN erfolgreich eingesetzt-NC-fräs-bearbeitung von vergüteten schmiedegesenken (How is CBN successfully used - NC milling of tempered forging dies), Industrie-Anzeiger 37 (1991) 28-30.
113. W. König, A. Werner, R. Löffler, Fräsbearbeitung von druckgießformen mit schlanken schaftfräsern (Milling of pressure casting dies with slim shank type cutters), Giesserei 79 (1992) 922-928.
114. W. König, A. Werner, Leistungssteigerung bei der fräsbearbeitung von druckgießwerkzeugen (Improvement of efficiency in milling of pressure casting tools), Giesserei 75 (1988) 502-506.
115. W. König, M. König, P. Kirner. Advanced technologies for machining and surface treatment of dies and moulds, in: Proc. Int. European Conference on Tooling Materials, Interlaken, Switzerland, 1992.
116. W.R. Gaida, C.A. Rodriguez, T. Altan Y. Altintas, Preliminary experiments for adaptive finish milling of die and mold surfaces with ball-nose end mills, in: Trans. North American Manufacturing Research Institution (NAMRI) of SME. Evanston, IL, USA, 23, 1995, pp. 193-198.
117. H.K. Tönshoff, J. Hernández-Camacho, Die manufacturing by 5- and 3-axes milling (influence of surface shape on cutting conditions), J. Mech. Working Technol. 20 (1989) 105-119.
118. V. Kauppinen, J. Paro, I. Nieminen, Application of high-speed milling to the Finnish manufacturing industry. Final Technical Report, Helsinki University of Technology Technical Research Centre of Finland, Espoo, Finland, 1993, 83 p.
119. [119) J. Paro, I. Nieminen, V. Kauppinen, High-speed milling in tooling production, J. Mater. Process. Technol. 52 (1) (1995) 27-34.
120. P. Rigby, High speed milling in the mould and die industry, in: Proc. Diamond and CBN Ultrahard Materials Symposium '93, Windsor, Ontario, Canada, 1993, pp. 177-188.
121. P. Rigby, Moulds and milling, Manuf. Eng. 6 (December) (1994) 294-297.
122. M. Page, Single setups speed up dies, Metulworking Prod. 139 (1) (1995) 31-36.
123. M. Page, A milling force to be reckoned with, Metalworking Prod. 138 (4) (1994) 23-36.
124. D.K. Aspinwall, R.C. Dewes, EPSRC Case for Support Ultra High Speed Machining of Hardened Ferrous Alloys. School of Manufacturing and Mechanical Engineering, Univerity of Birmingham, 1994.
125. High speed milling of heat treated moulds and dies, in GE Superabrasives. Dreieich, Germany, Video Presentation. 16 min, 1993.
126. Beaumont Machine Tools Ltd., The Future Face of Mould and Die...Now. Leaflet. Beaumont Machine Tools Lid., Coalville, UK. 1994.
127. Beaumont Machine Tools Ltd., High speed machining for the moald and die industry. Beaumont Machine Tools Ltd., Coalville, UK, Video Presentation, 1993.
128. Flush Fine Cutting, Makino Milling Machine Co. Ltd., Japan. Demonstration Sheets. 1993.
129. R.C. Trimbee, Advances in high-speed prismatic machining, in. Advances in High-speed Prismatic Machining, Metcut '94 Conference, Birmingham, 1994, 15 p.
130. J. Tlusty, High-speed milling, in: Proc. 6th Int. Machine Tool Engineers Conference (IMEC), Osaka. Japan, 1994, pp. 35-60.
131. Rambaudi Industriale SpA, Italy. Machining demonstrations. International Machine Tool Show (IMTS '94). Chicago, USA. 1994.
132. G. Bitterolf. Usinage grande vitesse. in: Proc. Conf. Journées d'information: Usinage à grande vitesse des outillages, CHTIM, Senlis, France. 1994.
133. Mikron AG Beil. HSM 520/HSM 1000 High-speed Milling Machines. Mikron AG Beil, Switzerland, Product Catalogue, 1993.
134. Depo Fette Hi-tec and Co Ltd., Mould milling demonstration. in: Tooling '95. National Exhibition Centre. Birmingham, UK, September. 1995.
135. Personal communication with Roy Talbot. Industrial Tooling Corporation (ITC) Ltd., Tamworth, UK., Oct. 1994.
136. H.R. Pearce Yamazen Faomat, Machining Demonstration, Tooling '94. National Exhibition Centre, Birmingham, UK, November, 1994.
137. OSG End Mill Technical Information. Norman Taps and Dies Ltd., Harold Wood, Essex, UK, 1994.
138. N. Whalley, Average cutter life and cost. Data presented at Hard Part Machining High Speed Machining Seminar, School of Manufacturing and Mechanical Engineering. University of Birmingham, September. 1995.
139. High-speed milling directly in hardened steel. Strässle Technische Informationssysteme AG. Glattbrugg. Switzerland. 1994.
140. International Organisation For Standardization (ISO). Tool life testing in milling - Part 2. end milling. ISO8688-2, 1989.