Tetracycline hydrochloride (TCH)-loaded drug carrier based on PLA:PCL nanofibre mats: Experimental characterisation and release kinetics modelling

Journal of Materials Science

Volumn 49, Issue 18, 2014, Pages 6270-6281

  Haroosh, Hazim J ^a   Dong, Yu ^a   Lau, Kin Tak ^b  

^a CURTIN UNIVERSITY   (Australia)

^b HONG KONG POLYTECHNIC UNIVERSITY   (Hong Kong)

Author keywords

[No Author keywords available]

Indexed keywords

MATERIALS SCIENCE; MECHANICAL PROPERTIES;

CRYSTALLINITIES; DRUG RELEASE KINETICS; FIBROUS NETWORKS; INFRARED SPECTRUM; MORPHOLOGICAL STRUCTURES; POLYLACTIC ACIDS; RELEASE KINETICS; TETRACYCLINE HYDROCHLORIDE;

FIBERS;

EID: 84904735250     PISSN: 00222461     EISSN: 15734803     Source Type: Journal    
DOI: 10.1007/s10853-014-8352-7     Document Type: Article

References (58)

1. 3 nano composite fibres by electrospinning. J Mater Sci 46:3378-3386. doi: 10.1007/s10853-010-5226-5
2. Dong Y, Chaudhary D, Haroosh H, Bickford T (2011) Development and characterisation of novel electrospun polylactic acid/tubular clay nanocomposites. J Mater Sci 46:6148-6153. doi: 10.1007/s10853-011-5605-6
3. Haroosh HJ, Chaudhary DS, Dong Y (2012) Electrospun PLA/PCL fibers with tubular nanoclay: morphological and structural analysis. J Appl Polym Sci 124:3930-3939
4. Haroosh HJ, Dong Y, Chaudhary DS, Ingram GD, Yusa S (2013) Electrospun PLA:PCL composites embedded with unmodified and 3-aminopropyltriethoxysilane (ASP) modified halloysite nanotubes (HNT). Appl Phys A Mater Sci Process 110:433-442
5. Dong Y, Bickford T, Haroosh HJ, Lau KT, Takagi H (2013) Multi-response analysis in the material characterisation of electrospun poly (lactic acid)/halloysite nanotube composite fibres based on Taguchi design of experiments: fibre diameter, non-intercalation and nucleation effects. Appl Phys A Mater Sci Process 112:747-757
6. Azman NN, Siddiqui S, Haroosh H, Albertran H, Johannessen B, Dong Y, Low IM (2013) Characteristics of X-ray attenuation in electrospun bismuth oxide/poly-lactic acid nanofibre mats. J Synchroton Radiat 20:741-748
7. 2 nanofibers in air and argon atmospheres. Appl Phys A Mater Sci Process. doi: 10.1007/s00339-014-8246-1
8. Dong Y, Mosaval T, Haroosh HJ, Umer R, Takagi H, Lau KT (2014) The potential use of electrospun PLA nanofibres as alternative reinforcements in an epoxy composite system. J Polym Sci B 52:618-623
9. Kim K, Luu YK, Chang C, Fang D, Hsiao BS, Chu B, Hadjiargyrou M (2004) Incorporation and controlled release of a hydrophilic antibiotic using poly(lactide-co-glycolide)-based electrospun nanofibrous scaffolds. J Control Release 98:47-56
10. Haroosh HJ, Dong Y, Ingram GD (2013) Synthesis, morphological structures and material characterization of electrospun PLA:PCL/magnetic nanoparticle composites for drug delivery. J Polym Sci B 51:1607-1617
11. Nair LS, Bhattacharyya S, Laurencin CT (2004) Development of novel tissue engineering scaffolds via electrospinning. Expert Opin Biol Ther 4:659-668
12. Verreck G, Chun I, Rosenblatt J, Peeters J, Dijck AV, Mensch J, Noppe M, Brewster ME (2003) Incorporation of drugs in an amorphous state into electrospun nanofibers composed of a water-insoluble, nonbiodegradable polymer. J Control Release 92:349-360
13. Thakur RA, Florek CA, Kohn J, Michniak BB (2008) Electrospun nanofibrous polymeric scaffold with targeted drug release profiles for potential application as wound dressing. Int J Pharm 364:87-93
14. Meng ZX, Zheng W, Li L, Zheng YF (2011) Fabrication, characterization and in vitro drug release behavior of electrospun PLGA/chitosan nanofibrous scaffold. Mater Chem Phys 125:606-611
15. Katti DS, Robinson KW, Ko FK, Laurencin CT (2004) Bioresorbable nanofiber-based systems for wound healing and drug delivery: optimization of fabrication parameters. J Biomed Mater Res, Part B 70B:286-296
16. Luong-Van E, Grøndahl L, Chua KN, Leong KW, Nurcombe V, Cool SM (2006) Controlled release of heparin from poly(ε-caprolactone) electrospun fibers. Biomaterials 27:2042-2050
17. Kenawy E, Abdel-Hay F, El-Newehy M, Wnek G (2009) Processing of polymer nanofibers through electrospinning as drug delivery systems. Mater Chem Phys 113:296-302
18. Taepaiboon P, Rungsardthong U, Supaphol P (2006) Drug-loaded electrospun mats of poly(vinyl alcohol) fibres and their release characteristics of four model drugs. Nanotechnology 17:2317
19. Deng XL, Sui G, Zhao ML, Chen GQ, Yang XP (2007) Poly(l-lactic acid)/hydroxyapatite hybrid nanofibrous scaffolds prepared by electrospinning. J Biomater Sci Polym Ed 18:117-130
20. Lim LT, Auras R, Rubino M (2008) Processing technologies for poly(lactic acid). Prog Polym Sci 33:820-852
21. Touny A, Lawrence J, Jones A, Bhaduri S (2010) Effect of electrospinning parameters on the characterization of PLA/HNT nanocomposite fibers. J Mater Res 25:857-865
22. Xu X, Zhong W, Zhou S, Trajtman A, Alfa M (2010) Electrospun PEG-PLA nanofibrous membrane for sustained release of hydrophilic antibiotics. J Appl Polym Sci 118:588-595
23. Lee K, Kim H, Khil M, Ra Y, Lee D (2003) Characterization of nano-structured poly(ε-caprolactone) nonwoven mats via electrospinning. Polymer 44:1287-1294
24. Huang Z, He C, Yang A, Zhang Y, Han X, Yin J, Wu Q (2006) Encapsulating drugs in biodegradable ultrafine fibers through co-axial electrospinning. J Biomed Mater Res A 77:169-179
25. Picciani PHS, Medeiros ES, Pan Z, Orts WJ, Mattoso LHC, Soares BG (2009) Development of conducting polyaniline/poly(lactic acid) nanofibers by electrospinning. J Appl Polym Sci 112:744-752
26. Islam M (2010) Fabrication and characterization of poly(vinyl alcohol)/alginate blend nanofibers by electrospinning method. Colloids Surf A Physicochem Eng Asp 366:135-140
27. Dhandayuthapani B, Krishnan U, Sethuraman S (2010) Fabrication and characterization of chitosan gelatin blend nanofibers for skin tissue engineering. J Biomed Mater Res B 94:264-272
28. Xie Z, Buschle-Diller G (2010) Electrospun poly(d,l-lactide) fibers for drug delivery: the influence of cosolvent and the mechanism of drug release. J Appl Polym Sci 115:1-8
29. Alexander LE (1969) X-ray diffraction methods in polymer science. Wiley, New York
30. Ning N, Yin Q, Luo F, Zhang Q, Du R, Fu Q (2007) Crystallization behavior and mechanical properties of polypropylene/halloysite composites. Polymer 48:7374-7384
31. Chittur KK (1998) FTIR/ATR for protein adsorption to biomaterial surfaces. Biomaterials 19:357-369
32. Cai X, Luan Y, Dong Q, Shao W, Li Z, Zhao Z (2011) Sustained release of 5-fluorouracil by incorporation into sodium carboxymethylcellulose sub-micron fibers. Int J Pharm 419:240-246
33. Das RK, Kasoju N, Bora U (2010) Encapsulation of curcumin in alginate-chitosan-pluronic composite nanoparticles for delivery to cancer cells. Nanomed Nanotechnol Biol Med 6:153-160
34. Zeng L, An L, Wu X (2011) Modeling drug-carrier interaction in the drug release from nanocarriers. J Drug Deliv. doi: 10.1155/2011/370308
35. Ritger PL, Peppas NA (1987) A simple equation for description of solute release I. Fickian and non-Fickian release from non-swellable devices in the form of slabs, spheres, cylinders or discs. J Control Release 5:23-36
36. Varelas CG, Dixon DG, Steiner CA (1995) Zero-order release from biphasic polymer hydrogels. J Control Release 34:185-192
37. Kalam MA, Humanyun M, Parvez N, Yada S, Garg A, Amin S, Sultana Y, Ali A (2007) Release kinetics of modified pharmaceutical dosage forms: a review. Cont J Pharm Sci 1:30-35
38. Gibaldi M, Feldman S (1967) Establishment of sink conditions in dissolution rate determinations. Theoretical considerations and application to nondisintegrating dosage forms. J Pharm Sci 56:1238-1242
39. Wagner JG (1969) Interpretation of percent dissolved-time plots derived from in vitro testing of conventional tablets and capsules. J Pharm Sci 58:1253-1257
40. Li P, Dai YN, Zhang JP, Wang AQ, Wei Q (2008) Chitosan-alginate nanoparticles as a novel drug delivery system for nifedipine. Int J Biomed Sci 4:221-228
41. Higuchi T (1961) Rate of release of medicaments from ointment bases containing drugs in suspension. J Pharm Sci 50:874-875
42. Higuchi T (1963) Mechanism of sustained-action medication. Theoretical analysis of rate of release of solid drugs dispersed in solid matrices. J Pharm Sci 52:1145-1149
43. Desai SJ, Simonelli AP, Higuchi WI (1965) Investigation of factors influencing release of solid drug dispersed in inert matrices. J Pharm Sci 54:1459-1464
44. Desai SJ, Singh P, Simonelli AP, Higuchi WI (1966) Investigation of factors influencing release of solid drug dispersed in inert matrices II: quantitation of procedures. J Pharm Sci 55:1224-1229
45. Lapidus H, Lordi NG (1966) Some factors affecting the release of a water-soluble drug from a compressed hydrophilic matrix. J Pharm Sci 55:840-843
46. Lapidus H, Lordi NG (1968) Drug release from compress hydrophilic matrices. J Pharm Sci 57:1292-1301
47. Siepmann J, Peppas NA (2001) Modeling of drug release from delivery systems based on hydroxypropylmethylcellulose (HPMC). Adv Drug Deliv Rev 48:139-157
48. Ritger PL, Peppas NA (1987) A simple equation for description of solute release II. Fickian and anomalous release from swellable devices. J Control Release 5:37-42
49. Spasova M, Stoilova O, Manolova N, Rashkov I, Altankov G (2007) Preparation of PLLA/PEG nanofibers by electrospinning and potential applications. J Bioact Compat Polym 22:62-76
50. Lee G, Song J, Yoon K (2010) Controlled wall thickness and porosity of polymeric hollow nanofibers by coaxial electrospinning. Macromol Res 18:571-576
51. Saraf A, Lozier G, Haesslein A, Kasper FK, Raphael RM, Baggett LS, Mikos AG (2009) Fabrication of nonwoven coaxial fiber meshes by electrospinning. Tissue Eng Part C Methods 15:333-344
52. Puppi D, Piras A, Detta N, Dinucci D, Chiellini F (2010) Poly(lactic-co-glycolic acid) electrospun fibrous meshes for the controlled release of retinoic acid. Acta Biomater 6:1258-1268
53. Sinha VR, Bansal K, Kaushik R, Kumria R, Trehan A (2004) Poly-ε-caprolactone microspheres and nanospheres: an overview. Int J Pharm 278:1-23
54. Gan ZH, Liang QZ, Zhang J, Jing XB (1997) Enzymatic degradation of poly(ε-caprolactone) film in phosphate buffer solution containing lipases. Polym Degrad Stab 56:209-213
55. Pastorino L, Piolic F, Zillid M, Convertid A, Nicolini C (2004) Lipase-catalyzed degradation of poly(ε-caprolactone). Enzyme Microb Technol 35:321-326
56. Huang MH, Li S, Vert M (2004) Synthesis and degradation of PLA-PCL-PLA triblock copolymer prepared by successive polymerization of ε-caprolactone and dl-lactide. Polymer 45:8675-8681
57. Stefani M, Coudane J, Vert M (2006) In vitro ageing and degradation of PEG-PLA diblock copolymer-based nanoparticles. Polym Degrad Stab 91:2554-2559
58. Maquet V, Boccaccini AR, Pravata L, Notingher I, Jérôme R (2004) Porous poly(α-hydroxyacid)/Bioglass® composite scaffolds for bone tissue engineering. I: Preparation and in vitro characterisation. Biomaterials 25:4185-4194