Single-sensor-based three-phase permanent-magnet synchronous motor drive system with luenberger observers for motor line current reconstruction

IEEE Transactions on Industry Applications

Volumn 50, Issue 4, 2014, Pages 2602-2613

  Hafez, Bahaa ^a   Abdel Khalik, Ayman S ^b   Massoud, Ahmed M ^b,c   Ahmed, Shehab ^a   Lorenz, Robert D ^d  

^a Department of Electrical and Computer Engineering   (United States)

^b Alexandria University The Faculty Of Engineering   (Egypt)

^c Qatar University   (Qatar)

^d UNIVERSITY OF WISCONSIN MADISON   (United States)

Author keywords

DC link current measurement; permanentmagnet synchronous motor (PMSM) position estimation; threephase current reconstruction; vector controlled PMSM

Indexed keywords

ALGORITHMS; PERMANENT MAGNETS; SENSORS; VECTOR SPACES;

CLOSED-LOOP OPERATION; DC-LINK; LUENBERGER OBSERVERS; PERMANENT-MAGNET SYNCHRONOUS MOTOR DRIVES; POSITION ESTIMATION; THREE-PHASE CURRENTS; VECTOR-CONTROLLED PMSM; VOLTAGE SOURCE INVERTER;

SYNCHRONOUS MOTORS;

EID: 84904601153     PISSN: 00939994     EISSN: None     Source Type: Journal    
DOI: 10.1109/TIA.2013.2296625     Document Type: Article

References (31)

1. L. Harnefors, S. E. Saarakkala, and M. Hinkkanen, "Speed control of electrical drives using classical control methods," IEEE Trans. Ind. Appl., vol. 49, no. 2, pp. 889-898, Mar./Apr. 2013.
2. C.-H. Choi, J.-K. Seok, and R. D. Lorenz, "Wide-speed direct torque and flux control for interior PM synchronous motors operating at voltage and current limits," IEEE Trans. Ind. Appl., vol. 49, no. 1, pp. 109-117, Jan./Feb. 2013.
3. P. Alaeinovin and J. Jatskevich, "Filtering of Hall-sensor signals for improved operation of brushless DC motors," IEEE Trans. Energy Convers., vol. 27, no. 2, pp. 547-549, Jun. 2012.
4. M. Pacas, "Sensorless drives in industrial applications," IEEE Ind. Electron. Mag., vol. 5, no. 2, pp. 16-23, Jun. 2011.
5. R. W. Hejny and R. D. Lorenz, "Evaluating the practical low-speed limits for back-EMF tracking-based sensorless speed control using drive stiffness as a key metric," IEEE Trans. Ind. Appl., vol. 47, no. 3, pp. 1337-1343, May/Jun. 2011.
6. C.-Y. Yu, J. Tamura, D. D. Reigosa, and R. D. Lorenz, "Position selfsensing evaluation of a FI-IPMSM based on high-frequency signal injection methods," IEEE Trans. Ind. Appl., vol. 49, no. 2, pp. 880-888, Mar./Apr. 2013.
7. N. Bianchi, E. Fornasiero, and S. Bolognani, "Effect of stator and rotor saturation on sensorless rotor position detection," IEEE Trans. Ind. Appl., vol. 49, no. 3, pp. 1333-1342, May/Jun. 2013.
8. B. Metidji, N. Taib, L. Baghli, T. Rekioua, and S. Bacha, "Low-cost direct torque control algorithm for induction motor without AC phase current sensors," IEEE Trans. Power Electron., vol. 27, no. 9, pp. 4132-4139, Sep. 2012.
9. J. T. Boys, "Novel current sensor for PWM AC drives," Proc. Inst. Elect. Eng.-Elect. Power Appl., vol. 135, no. 1, pp. 27-32, Jan. 1988. (Pubitemid 18566920)
10. M. Carpaneto, P. Fazio, M. Marchesoni, and G. Parodi, "Dynamic performance evaluation of sensorless permanent-magnet synchronous motor drives with reduced current sensors," IEEE Trans. Ind. Electron., vol. 59, no. 12, pp. 4579-4589, Dec. 2012.
11. Z. Bing, X. Du, and J. Sun, "Control of three-phase PWM rectifiers using a single DC current sensor," IEEE Trans. Power Electron., vol. 26, no. 6, pp. 1800-1808, Jun. 2011.
12. H. Kim, M. Falahi, T. M. Jahns, and M. W. Degner, "Inductor current measurement and regulation using a single DC link current sensor for interleaved DC-DC converters," IEEE Trans. Power Electron., vol. 26, no. 5, pp. 1503-1510, May 2011.
13. Y. Cho, A. Koran, H. Miwa, B. York, and J.-S. Lai, "An active current reconstruction and balancing strategy with DC-link current sensing for a multi-phase coupled-inductor converter," IEEE Trans. Power Electron., vol. 27, no. 4, pp. 1697-1705, Apr. 2012.
14. D. P. Marèetic and E. M. Adic, "Improved three-phase current reconstruction for induction motor drives with DC-link shunt," IEEE Trans. Ind. Electron., vol. 57, no. 7, pp. 2454-2462, Jul. 2010.
15. C. Xia, Z. Li, and T. Shi, "A control strategy for four-switch threephase brushless DC motor using single current sensor," IEEE Trans. Ind. Electron., vol. 56, no. 6, pp. 2058-2066, Jun. 2009.
16. Y. Gu, F. Ni, D. Yang, and H. Liu, "Switching-state phase shift method for three-phase-current reconstruction with a single DC-link current sensor," IEEE Trans. Ind. Electron., vol. 58, no. 11, pp. 5186-5194, Nov. 2011.
17. J.-I. Ha, "Voltage injection method for three-phase current reconstruction in PWM inverters using a single sensor," IEEE Trans. Power Electron., vol. 24, no. 3, pp. 767-775, Mar. 2009.
18. W. Jiang and B. Fahimi, "Current reconstruction techniques for survivable three-phase PWM converters," IEEE Trans. Power Electron., vol. 25, no. 1, pp. 188-192, Jan. 2010.
19. F. Blaabjerg, J. K. Pedersen, U. Jaeger, and P. Thoegersen, "Single current sensor technique in the DC link of three-phase PWM-VS inverters: A review and a novel solution," IEEE Trans. Ind. Appl., vol. 33, no. 5, pp. 1241-1253, Sep./Oct. 1997. (Pubitemid 127828262)
20. H. Kim and T. M. Jahns, "Phase current reconstruction for AC motor drives using a DC link single current sensor and measurement voltage vectors," IEEE Trans. Power Electron., vol. 21, no. 5, pp. 1413-1419, Sep. 2006. (Pubitemid 46405255)
21. H. Kim and T. M. Jahns, "Current control for AC motor drives using a single DC-link current sensor and measurement voltage vectors," IEEE Trans. Ind. Appl., vol. 42, no. 6, pp. 1539-1547, Nov./Dec. 2006. (Pubitemid 44824055)
22. Y.-S. Lai, Y.-K. Lin, and C.-W. Chen, "New hybrid pulsewidth modulation technique to reduce current distortion and extend current reconstruction range for a three-phase inverter using only DC-link sensor," IEEE Trans. Power Electron., vol. 28, no. 3, pp. 1331-1337, Mar. 2013.
23. Y. Cho, T. La Bella, and J.-S. Lai, "A three-phase current reconstruction strategy with online current offset compensation using a single current sensor," IEEE Trans. Ind. Electron., vol. 59, no. 7, pp. 2924-2933, Jul. 2012.
24. T. M. Wolbank and P. E. Macheiner, "Current-controller with single DC link current measurement for inverter-fed AC machines based on an improved observer-structure," IEEE Trans. Power Electron., vol. 19, no. 6, pp. 1562-1567, Nov. 2004.
25. B. Saritha and P. A. Janakiraman, "Sinusoidal three-phase current reconstruction and control using a DC-link current sensor and a curve-fitting observer," IEEE Trans. Ind. Electron., vol. 54, no. 5, pp. 2657-2664, Oct. 2007.
26. P. Vaclavek, P. Blaha, and I. Herman, "AC drive observability analysis," IEEE Trans. Ind. Electron., vol. 60, no. 8, pp. 3047-3059, Aug. 2013.
27. J.-I. Ha, "Current prediction in vector-controlled PWM inverters using single DC-link current sensor," IEEE Trans. Ind. Electron., vol. 57, no. 2, pp. 716-726, Feb. 2010.
28. L. D. Gomez, N. Miller, and K. Binnion, "Using electric-line tools to clean wellbore laterals and perforate toes," presented at the SPE/ICoTA Coiled Tubing & Well Intervention Conference & Exhibition, The Woodlands, TX, USA, Mar. 2013.
29. D. G. Holmes and T. A. Lipo, Pulse Width Modulation for Power Converters: Principles and Practice, 1st ed. Hoboken, NJ, USA: Wiley, 2003.
30. G. Ellis, Observers in Control Systems: A Practical Guide, 1st ed. San Diego, CA, USA: Academic Press, 2002.
31. G. F. Franklin, Digital Control of Dynamic Systems, 3rd ed. Half Moon Bay, CA, USA: Ellis-Kagle, 2006.