AC drive observability analysis

IEEE Transactions on Industrial Electronics

Volumn 60, Issue 8, 2013, Pages 3047-3059

  Vaclavek, Pavel ^a   Blaha, Petr ^a   Herman, Ivo ^a  

^a BRNO UNIVERSITY OF TECHNOLOGY   (Czech Republic)

Author keywords

Induction machine; nonlinear system; observability; synchronous machine

Indexed keywords

ELECTRIC MACHINERY; INDUCTION MOTORS; MAGNETIC FLUX; NONLINEAR DYNAMICAL SYSTEMS; NONLINEAR SYSTEMS; OBSERVABILITY; PERMANENT MAGNETS;

AC INDUCTION MOTORS; CONTROL APPLICATIONS; INDUCTION MACHINES; OBSERVABILITY ANALYSIS; PERMANENT MAGNET SYNCHRONOUS; POSITION ESTIMATION; STATE OBSERVABILITY; SYNCHRONOUS MACHINE;

SYNCHRONOUS MACHINERY;

EID: 84876210890     PISSN: 02780046     EISSN: None     Source Type: Journal    
DOI: 10.1109/TIE.2012.2203775     Document Type: Article

References (53)

1. J. Guzinski, M. Diguet, Z. Krzeminski, A. Lewicki, and H. Abu-Rub, "Application of speed and load torque observers in high-speed train drive for diagnostic purposes," IEEE Trans. Ind. Electron., vol. 56, no. 1, pp. 248-256, Jan. 2009.
2. J. Guzinski, H. Abu-Rub, M. Diguet, Z. Krzeminski, and A. Lewicki, "Speed and load torque observer application in high-speed train electric drive," IEEE Trans. Ind. Electron., vol. 57, no. 2, pp. 565-574, Feb. 2010.
3. J. Holtz, "Sensorless speed and position control of induction motors," in Proc. 27th IEEE IECON, Denver, CO, 2001, pp. 1200-1205.
4. M. Barut, S. Bogosyan, and M. Gokasan, "Speed sensorless direct torque control of IMs with rotor resistance estimation," Energy Convers. Manage., vol. 46, no. 3, pp. 335-349, Feb. 2005.
5. S. Jafarzadeh, C. Lascu, and S. Fadali, "State estimation of induction motor drives using the unscented Kalman filter," IEEE Trans. Ind. Electron., vol. 59, no. 11, pp. 4207-4216, 2012.
6. G. G. Rigatos, "A derivative-free Kalman filtering approach to state estimation-based control of nonlinear systems," IEEE Trans. Ind. Electron., vol. 59, no. 10, pp. 3987-3997, Oct. 2012.
7. P. Vaclavek and P. Blaha, "Lyapunov function based flux and speed observer for ac induction motor sensorless control and parameters estimation," IEEE Trans. Ind. Electron., vol. 53, no. 1, pp. 138-145, Feb. 2006. (Pubitemid 43245282)
8. G. Welch and G. Bishop, "An introduction to the Kalman filter," in SIGGRAPH Course Syllabus. Chapel Hill, NC: Univ. North Carolina, 2001, p. 82.
9. F. Genduso, R. Miceli, C. Rando, and G. R. Galluzzo, "Back EMF sensorless-control algorithm for high-dynamic performance PMSM," IEEE Trans. Ind. Electron., vol. 57, no. 6, pp. 2092-2100, Jun. 2010.
10. K. Hongryel, S. Jubum, and L. Jangmyung, "A high-speed sliding-mode observer for the sensorless speed control of a PMSM," IEEE Trans. Ind. Electron., vol. 58, no. 9, pp. 4069-4077, Sep. 2011.
11. T. Orlowska-Kowalska and M. Dybkowski, "Stator-current-based MRAS estimator for a wide range speed-sensorless induction-motor drive," IEEE Trans. Ind. Electron., vol. 57, no. 4, pp. 1296-1308, Apr. 2010.
12. S. Gadoue, D. Giaouris, and J. Finch, "Sensorless control of induction motor drives at very low and zero speeds using neural network flux observers," IEEE Trans. Ind. Electron., vol. 56, no. 8, pp. 3029-3039, Aug. 2009.
13. J. Holtz, "Sensorless control of induction motor drives," Proc. IEEE, vol. 90, no. 8, pp. 1359-1394, Aug. 2002. (Pubitemid 43785863)
14. K. Akatsu and A. Kawamura, "Sensorless very low-speed and zero-speed estimations with online rotor resistance estimation of induction motor without signal injection," IEEE Trans. Ind. Appl., vol. 36, no. 3, pp. 764-771, May/Jun. 2000.
15. M. S. Zaky, "Stability analysis of speed and stator resistance estimators for sensorless inductionmotor drives," IEEE Trans. Ind. Electron., vol. 59, no. 2, pp. 858-870, Feb. 2012.
16. G. Foo and M. Rahman, "Sensorless direct torque and flux-controlled IPM synchronous motor drive at very low speed without signal injection," IEEE Trans. Ind. Electron., vol. 57, no. 1, pp. 395-403, Jan. 2010.
17. J. Chiasson, M. Bodson, and L. Tolbert, "Observability of speed in an induction motor from stator currents and voltages," in Proc. 44th IEEE Conf. Decis. Control, 2005, no. 5, pp. 3438-3443. (Pubitemid 46297503)
18. G. Kenné, T. Ahmed-Ali, F. Lamnabhi-Lagarrigue, and A. Arzandé, "Nonlinear systems time-varying parameter estimation: Application to induction motors," Elect. Power Syst. Res., vol. 78, no. 11, pp. 1881-1888, Nov. 2008.
19. A. Pavlov and A. Zaremba, "Adaptive observers for sensorless control of an induction motor," in Proc. IEEE Amer. Control Conf. (Cat. No.01CH37148), 2001, vol. 2, pp. 1557-1562. (Pubitemid 32837713)
20. C.-S. Chiu, K.-Y. Lian, C.-Y. Hung, and P. Liu, "Adaptive speed control for induction motors based on a semi-current-fed model," Int. J. Control, vol. 81, no. 2, pp. 307-316, Feb. 2008. (Pubitemid 350072405)
21. H. Shim, Y. Son, and J. Back, "Enlarging the class of linear systems admitting adaptive observers without persistent excitation," in Proc. Eur. Control Conf., 2003, pp. 262-269.
22. D. Del Vecchio and R. Murray, "Observability and local observer construction for unknown parameters in linearly and nonlinearly parameterized systems," in Proc. IEEE Amer. Control Conf., 2003, vol. 6, no. 1, pp. 4748-4753.
23. D. Basic, F. Malrait, and P. Rouchon, "Euler-Lagrange models with complex currents of three-phase electrical machines and observability issues," IEEE Trans. Autom. Control, vol. 55, no. 1, pp. 212-217, Jan. 2010.
24. E. Laroche, E. Sedda, and C. Durieu, "Methodological insights for online estimation of induction motor parameters," IEEE Trans. Control Systems Technology, vol. 16, no. 5, pp. 1021-1028, Sep. 2008.
25. S. Ibarra-rojas, J. Moreno, and G. Espinosa-pa, "Global observability analysis of sensorless induction motors," Automatica, vol. 40, no. 6, pp. 1079-1085, 2004.
26. R. Hermann and A. Krener, "Nonlinear controllability and observability," IEEE Trans. Autom. Control, vol. AC-22, no. 5, pp. 728-740, Oct. 1977.
27. M. Ezzat, J. de Leon, N. Gonzalez, and A. Glumineau, "Sensorless speed control of permanent magnet synchronous motor by using sliding mode observer," in Proc. 11th IEEE Int. Workshop VSS, Jun. 2010, pp. 227-232.
28. D. Zaltni, M. N. Abdelkrim, M. Ghanes, and J. P. Barbot, "Observability analysis of PMSM," in Proc. 3rd Int. Conf. SCS, Nov. 2009, pp. 1-6.
29. M. Ghanes, J. De Leon, and A. Glumineau, "Observability study and observer-based interconnected form for sensorless induction motor," in Proc. 45th IEEE Conf. Decis. Control, 2006, pp. 1240-1245. (Pubitemid 351283694)
30. K. P. Kovács and I. Rácz, Transiente Vorgänge in Wechselstrommaschinen, vol. I-II. Budapest, Hungary: Verlag der Ungarischen Akademie der Wissenschaften, 1959.
31. J. F. Broenik, "Introduction to physical systems modelling with bond graphs," in SiE Whitebook on Simulation Methodologies. Enschede-Noord, The Netherlands: Univ. Twente, 1999.
32. G. Slemon, "Modelling of induction machines for electric drives," IEEE Trans. Ind. Appl., vol. 25, no. 6, pp. 1126-1131, Nov. 1989. (Pubitemid 20654650)
33. B. Peterson, "Oscillations in inverter fed induction motor drives," M.S. thesis, Lund Inst. Technol., Lund, Sweden, 1991.
34. Z. Chen, M. Tomita, S. Doki, and S. Okuma, "An extended electromotive force model for sensorless control of interior permanent-magnet synchronous motors," IEEE Trans. Ind. Electron., vol. 50, no. 2, pp. 288-295, Apr. 2003.
35. J. Hedrick and A. Girard, Control of Nonlinear Dynamic Systems: Theory and Applications. Berkeley, CA: Univ. California, 2005.
36. C. Canudas De Wit, A. Youssef, J. Barbot, P. Martin, and F. Malrait, "Observability conditions of induction motors at low frequencies," in Proc. 39th IEEE Conf. Decis. Control, 2000, vol. 3, pp. 2044-2049. (Pubitemid 32528330)
37. P. Vas, Parameter Estimation, Condition Monitoring, and Diagnosis of Electrical Drives. Oxford, U.K.: Clarendon, 1993.
38. P. Blaha and P. Vaclavek, "The algorithm for online stator resistance identification of an ac induction motor," in Proc. 10th IEEE Int. Conf. Intell. Eng. Syst., 2006, pp. 86-91. (Pubitemid 47130936)
39. M. S. Zaky, "Stability analysis of speed and stator resistance estimators for sensorless inductionmotor drives," IEEE Trans. Ind. Electron., vol. 59, no. 2, pp. 858-870, Feb. 2012.
40. P. Vaclavek and P. Blaha, "AC induction machine speed observer with rotor resistance adaptation," in Proc. 16th IFAC World Congr., Praha, Czech Republic, 2005.
41. A. Ganji, P. Guillaume, R. Pintelon, and P. Lataire, "Induction motor dynamic and static inductance identification using a broadband excitation technique," IEEE Trans. Energy Convers., vol. 13, no. 1, pp. 15-20, Mar. 1998. (Pubitemid 128742316)
42. S.-B. Lee and T. Habetler, "An online stator winding resistance estimation technique for temperature monitoring of line-connected induction machines," IEEE Trans. Ind. Appl., vol. 39, no. 3, pp. 685-694, May 2003.
43. S. Mir, M. Elbuluk, and D. Zinger, "Pi and fuzzy estimators for tuning the stator resistance in direct torque control of induction machines," IEEE Trans. Power Electron., vol. 13, no. 2, pp. 279-287, Mar. 1998. (Pubitemid 128742138)
44. L. Vesely and D. Zamecnik, "Extending mathematical model of permanent magnet synchronous motors in alpha-beta coordinate system for EKF," in Proc. 12th IEEE CINTI, Nov. 2011, pp. 457-460.
45. J. Holtz, "Drift-and parameter-compensated flux estimator for persistent zero-stator-frequency operation of sensorless-controlled induction motors," IEEE Trans. Ind. Appl., vol. 39, no. 4, pp. 1052-1060, Jul. 2003.
46. D. Basic, F. Malrait, and P. Rouchon, "Current controller for lowfrequency signal injection and rotor flux position tracking at low speeds," IEEE Trans. Ind. Electron., vol. 58, no. 9, pp. 4010-4022, Sep. 2011.
47. Z. Q. Zhu and L. M. Gong, "Investigation of effectiveness of sensorless operation in carrier-signal-injection-based sensorless-control methods," IEEE Trans. Ind. Electron., vol. 58, no. 8, pp. 3431-3439, Aug. 2011.
48. S. Nandi, S. Ahmed, and H. Toliyat, "Detection of rotor slot and other eccentricity related harmonics in a three phase induction motor with different rotor cages," IEEE Trans. Energy Convers., vol. 16, no. 3, pp. 253-260, Sep. 2001. (Pubitemid 32780118)
49. P. Vaclavek and P. Blaha, "Hybrid speed estimation scheme for ac induction machine sensorless control," in Proc. IEEE Conf. Control Appl., Toronto, ON, Canada, 2005, vol. 1, pp. 1455-1460. (Pubitemid 43896181)
50. L. Harnefors and H.-P. Nee, "A general algorithm for speed and position estimation of ac motors," IEEE Trans. Ind. Electron., vol. 47, no. 1, pp. 77-83, Feb. 2000. (Pubitemid 33775718)
51. D. Basic, F. Malrait, and P. Rouchon, "Current controller for lowfrequency signal injection and rotor flux position tracking at low speeds," IEEE Trans. Ind. Electron., vol. 58, no. 9, pp. 4010-4022, Sep. 2011.
52. G. Foo and M. Rahman, "Sensorless sliding-mode MTPA control of an IPM synchronous motor drive using a sliding-mode observer and HF signal injection," IEEE Trans. Ind. Electron., vol. 57, no. 4, pp. 1270-1278, Apr. 2010.
53. R. Wrobel, A. S. Budden, D. Salt, D. Holliday, P. H. Mellor, A. Dinu, P. Sangha, and M. Holme, "Rotor design for sensorless position estimation in permanent-magnet machines," IEEE Trans. Ind. Electron., vol. 58, no. 9, pp. 3815-3824, Sep. 2011.