Speed control of electrical drives using classical control methods

IEEE Transactions on Industry Applications

Volumn 49, Issue 2, 2013, Pages 889-898

  Harnefors, Lennart ^a   Saarakkala, Seppo E ^b   Hinkkanen, Marko ^b  

^a ABB Power Systems HVDC   (Sweden)

^b AALTO UNIVERSITY   (Finland)

Author keywords

Analytical tuning; disturbance rejection; prefiltering; robustness; speed control; tracking performance; two degree of freedom (2DOF) proportional (P) integral (PI) control

Indexed keywords

ANALYTICAL PARAMETERS; CLASSICAL CONTROL; DESIGN AND ANALYSIS; ELECTRICAL DRIVES; PRE-FILTERING; PROPORTIONAL-INTEGRAL; TRACKING PERFORMANCE; TWO-DEGREE-OF-FREEDOM;

DISTURBANCE REJECTION; SPEED CONTROL; TWO TERM CONTROL SYSTEMS;

ROBUSTNESS (CONTROL SYSTEMS);

EID: 84875140494     PISSN: 00939994     EISSN: None     Source Type: Journal    
DOI: 10.1109/TIA.2013.2244194     Document Type: Article

References (47)

1. P. K. Nandam and P. C. Sen, "Analog and digital speed control of dc drives using proportional-integral and integral-proportional control techniques," IEEE Trans. Ind. Electron., vol. IE-34, no. 2, pp. 227-234, May 1987.
2. C.-M. Liaw and C.-M. Wu, "Design and implementation of a highperformance field-oriented induction motor drive," IEEE Trans. Ind. Electron., vol. 38, no. 4, pp. 275-282, Aug. 1991.
3. C.-M. Liaw, "Design of a two-degree-of-freedom controller for motor drives," IEEE Trans. Autom. Control, vol. 37, no. 8, pp. 1215-1220, Aug. 1992.
4. K.-T. Chang, T.-S. Low, and T.-H. Lee, "An optimal speed controller for permanent-magnet synchronous motor drives," IEEE Trans. Ind. Electron., vol. 41, no. 5, pp. 503-510, Oct. 1994.
5. K. I. Hwu and C. M. Liaw, "Robust quantitative speed control of a switched reluctance motor drive," Proc. Inst. Elect. Eng.-Elect. Power Appl., vol. 148, no. 4, pp. 345-353, Jul. 2001. (Pubitemid 32705132)
6. M. S. Huang and C.M. Liaw, "Speed control for field-weakened induction motor drive," Proc. Inst. Elect. Eng.-Elect. Power Appl., vol. 152, no. 3, pp. 565-576, May 2005. (Pubitemid 40718416)
7. M. Jemli, H. Ben Azza, M. Boussak, and M. Gossa, "Sensorless indirect stator field orientation speed control for single-phase induction motor drive," IEEE Trans. Power Electron., vol. 24, no. 6, pp. 1618-1627, Jun. 2009.
8. A. Takano, "Quick-response torque-controlled induction motor drives using phase-locked loop speed control with disturbance compensation," IEEE Trans. Ind. Electron., vol. 43, no. 6, pp. 640-646, Dec. 1996. (Pubitemid 126772894)
9. G. Feng, Y.-F. Liu, and L. Huang, "A new robust algorithm to improve the dynamic performance on the speed control of induction motor drive," IEEE Trans. Power Electron., vol. 19, no. 6, pp. 1614-1627, Nov. 2004.
10. C. De Angelo, G. Bossio, J. Solsona, G. O. García, and M. Inéz Valla, "Mechanical sensorless speed control of permanent-magnet ac motors driving an unknown load," IEEE Trans. Ind. Electron., vol. 53, no. 2, pp. 406-414, Apr. 2006.
11. Y. A.-R. I. Mohamed, "Adaptive self-tuning speed control for permanentmagnet synchronous motor drive with dead time," IEEE Trans. Energy Convers., vol. 21, no. 4, pp. 855-862, Dec. 2006. (Pubitemid 44824170)
12. M. N. Uddin and M. M. I. Chy, "Online parameter-estimation-based speed control of PM AC motor drive in flux-weakening region," IEEE Trans. Ind. Appl., vol. 44, no. 5, pp. 1486-1494, Sep./Oct. 2008.
13. C.-M. Liaw and S.-Y. Cheng, "Fuzzy two-degrees-of-freedom speed controller for motor drives," IEEE Trans. Ind. Electron., vol. 42, no. 2, pp. 209-216, Apr. 1995.
14. L. Zhen and L. Xu, "Fuzzy learning enhanced speed control of an indirect field-oriented induction machine drive," IEEE Trans. Control Syst. Technol., vol. 8, no. 2, pp. 270-278, Mar. 2000.
15. C. B. Butt, M. A. Hoque, and M. A. Rahman, "Simplified fuzzy-logicbased MTPA speed control of IPMSM drive," IEEE Trans. Ind. Appl., vol. 40, no. 6, pp. 1529-1535, Nov./Dec. 2004.
16. M. N. Uddin and M. A. Rahman, "High-speed control of IPMSM drives using improved fuzzy logic algorithm," IEEE Trans. Ind. Electron., vol. 54, no. 1, pp. 190-199, Feb. 2007. (Pubitemid 46444016)
17. Y.-S. Kung and M.-H. Tsai, "FPGA-based speed control IC for PMSM drive with adaptive fuzzy control," IEEE Trans. Power Electron., vol. 22, no. 6, pp. 2476-2486, Nov. 2007. (Pubitemid 350154081)
18. M. Masiala, B. Vafakhah, J. Salmon, and A.M. Knight, "Fuzzy self-tuning speed control of an indirect field-oriented control induction motor drive," IEEE Trans. Ind. Appl., vol. 44, no. 6, pp. 1732-1740, Nov./Dec. 2008.
19. Y. S. Kung, C. M. Liaw, and M. S. Ouyang, "Adaptive speed control for induction motor drives using neural networks," IEEE Trans. Ind. Electron., vol. 42, no. 1, pp. 25-32, Feb. 1995.
20. M. A. Rahman and A. A. Hoque, "Online self-tuning ANN-based speed control of a PM DC motor," IEEE/ASME Trans. Mechatronics, vol. 2, no. 3, pp. 169-178, Sep. 1997.
21. T.-C. Chen and T.-T. Sheu, "Model reference neural network controller for induction motor speed control," IEEE Trans. Energy Convers., vol. 17, no. 2, pp. 157-163, Jun. 2002. (Pubitemid 34798927)
22. J. Y. Hung, R. M. Nelms, and P. B. Stevenson, "An output feedback sliding mode speed regulator for DC drives," IEEE Trans. Ind. Appl., vol. 30, no. 3, pp. 691-698, May/Jun. 1994.
23. S. K. Chung, J. H. Lee, J. S. Ko, and M. J. Youn, "Robust speed control of brushless direct-drive motor using integral variable structure control," Proc. Inst. Elect. Eng.-Elect. Power Appl., vol. 142, no. 6, pp. 361-370, Nov. 1995.
24. K.-K. Shyu and H.-J. Shieh, "A new switching surface sliding-mode speed control for induction motor drive systems," IEEE Trans. Power Electron., vol. 11, no. 4, pp. 660-667, Jul. 1996. (Pubitemid 126780437)
25. T.-S. Chuang and C. Pollock, "Robust speed control of a switched reluctance vector drive using variable structure approach," IEEE Trans. Ind. Electron., vol. 44, no. 6, pp. 800-808, Dec. 1997. (Pubitemid 127767620)
26. I.-C. Baik, K.-H. Kim, and M.-J. Youn, "Robust nonlinear speed control of PM synchronous motor using adaptive and sliding mode control techniques," Proc. Inst. Elect. Eng.-Elect. Power Appl., vol. 145, no. 4, pp. 369-376, Nov. 1998.
27. C.-M. Liaw, Y.-M. Lin, and K.-H. Chao, "A VSS speed controller with model reference response for induction motor drive," IEEE Trans. Ind. Electron., vol. 48, no. 6, pp. 1136-1147, Dec. 2001. (Pubitemid 33149166)
28. M. Rashed, K. B. Goh, M. W. Dunnigan, P. F. A. MacConnell, A. F. Stronach, and B. W. Williams, "Sensorless second-order slidingmode speed control of a voltage-fed induction-motor drive using nonlinear state feedback," Proc. Inst. Elect. Eng.-Elect. Power Appl., vol. 152, no. 5, pp. 1127-1136, Sep. 2005. (Pubitemid 41392142)
29. Z. Ibrahim and E. Levi, "A comparative analysis of fuzzy logic and PI speed control in high-performance AC drives using experimental approach," IEEE Trans. Ind. Appl., vol. 38, no. 5, pp. 1210-1218, Sep./Oct. 2002. (Pubitemid 35303232)
30. K. Aström and T. Hägglund, PID Controllers: Theory, Design, and Tuning, 2nd ed. Research Triangle Park, NC, USA: Instrum. Soc. Amer., 1995.
31. G. Ellis, Control System Design Guide: A Practical Guide. San Diego, CA, USA: Elsevier, 2004.
32. B. K. Bose, Ed., Power Electronics and Variable Frequency Drives. Piscataway, NJ, USA: IEEE Press, 1996.
33. N. Mohan, T. M. Undeland, and W. P. Robbins, Power Electronics: Converters, Applications, and Design, 2nd ed. New York, NY, USA: Wiley, 1995.
34. J.-M. Kim and S.-K. Sul, "Speed control of interior permanent magnet synchronous motor drive for the flux weakening operation," IEEE Trans. Ind. Appl., vol. 33, no. 1, pp. 43-48, Jan./Feb. 1997.
35. L. Harnefors, K. Pietiläinen, and L. Gertmar, "Torque- maximizing fieldweakening control: Design, analysis, and parameter selection," IEEE Trans. Ind. Electron., vol. 48, no. 1, pp. 161-168, Feb. 2001. (Pubitemid 32271129)
36. D.-H. Lee and J.-W. Ahn, "Dual speed control scheme of servo drive system for a nonlinear friction compensation," IEEE Trans. Power Electron., vol. 23, no. 2, pp. 959-965, Mar. 2008. (Pubitemid 351460539)
37. L. Harnefors, M. Jansson, R. Ottersten, and K. Pietiläinen, "Unified sensorless vector control of synchronous and induction motors," IEEE Trans. Ind. Electron., vol. 50, no. 1, pp. 153-160, Feb. 2003.
38. H. Kubota and K. Matsuse, "Speed sensorless field-oriented control of induction motor with rotor resistance adaptation," IEEE Trans. Ind. Appl., vol. 30, no. 6, pp. 1219-1224, Sep./Oct. 1994.
39. T. Glad and L. Ljung, Control Theory: Multivariable and Nonlinear Methods. New York, NY, USA: Taylor & Francis, 2000.
40. F. Briz, M. W. Degner, and R. D. Lorenz, "Analysis and design of current regulators using complex vectors," IEEE Trans. Ind. Appl., vol. 36, no. 3, pp. 817-825, May/Jun. 2000.
41. G. F. Franklin and J. D. Powell, Digital Control of Dynamic Systems. Reading, MA, USA: Addison-Wesley, 1980.
42. L. Harnefors and H.-P. Nee, "Model-based current control of AC machines using the internal model control method," IEEE Trans. Ind. Appl., vol. 34, no. 1, pp. 133-141, Jan./Feb. 1998. (Pubitemid 128739705)
43. G. Zhang and J. Furusho, "Speed control of two-inertia system by PI/PID control," IEEE Trans. Ind. Electron., vol. 47, no. 3, pp. 603-609, Jun. 2000.
44. M. A. Valenzuela, J. M. Bentley, and R. D. Lorenz, "Evaluation of torsional oscillations in paper machine sections," IEEE Trans. Ind. Appl., vol. 41, no. 2, pp. 493-501, Mar./Apr. 2005. (Pubitemid 40564651)
45. M. A. Valenzuela, J. M. Bentley, P. C. Aguilera, and R. D. Lorenz, "Improved coordinated response and disturbance rejection in the critical sections of paper machines," IEEE Trans. Ind. Appl., vol. 43, no. 3, pp. 857-869, May/Jun. 2007. (Pubitemid 46864821)
46. S. Carrière, S. Caux, and M. Fadel, "Optimised speed control in state space for PMSM direct drives," IET Elect. Power Appl., vol. 4, no. 3, pp. 158-168, 2010.
47. Y. Wu, K. Fujikawa, and H. Kobayashi, "A control method of speed control drive system with backlash," in Proc. AMC-MIE, Mar. 18-21, 1996, vol. 2, pp. 631-636.