Dynamic performance evaluation of sensorless permanent-magnet synchronous motor drives with reduced current sensors

IEEE Transactions on Industrial Electronics

Volumn 59, Issue 12, 2012, Pages 4579-4589

  Carpaneto, Matteo ^a   Fazio, Paolo ^b   Marchesoni, Mario ^b   Parodi, Gianluca ^b  

^a EUROCONTROL   (Belgium)

^b UNIVERSITY OF GENOA   (Italy)

Author keywords

Direct current (dc) link current sensor; low cost implementation; permanent magnet synchronous motors (PMSMs); sensorless control

Indexed keywords

CONTROL HARDWARES; CURRENT SENSORS; DIRECT CURRENT; DRIVE SYSTEMS; DYNAMIC PERFORMANCE; LOW-COST IMPLEMENTATION; PERMANENT MAGNET SYNCHRONOUS MOTOR; PERMANENT-MAGNET SYNCHRONOUS MOTOR DRIVES; POSITION SENSORLESS; SENSOR LESS CONTROL; SENSORLESS;

SENSORS; SYNCHRONOUS MOTORS;

PERMANENT MAGNETS;

EID: 84863737706     PISSN: 02780046     EISSN: None     Source Type: Journal    
DOI: 10.1109/TIE.2012.2185010     Document Type: Article

References (44)

1. J.W. Finch and D. Giaouris, "Controlled ac electrical drives," IEEE Trans. Ind. Electron., vol. 55, no. 2, pp. 481-491, Feb. 2008.
2. P. P. Acarnley and J. F. Watson, "Review of position sensorless operation of brushless permanent-magnet machines," IEEE Trans. Ind. Electron., vol. 53, no. 2, pp. 352-362, Apr. 2006.
3. K. Raggl, B. Warberger, T. Nussbaumer, S. Burger, and J. W. Kolar, "Robust angle-sensorless control of a PMSM bearingless pump," IEEE Trans. Ind. Electron., vol. 56, no. 6, pp. 2076-2085, Jun. 2009.
4. R. Raute, C. Caruana, C. S. Staines, J. Cilia, M. Sumner, and G. M. Asher, "Analysis and compensation of inverter nonlinearity effect on a sensorless PMSM drive at very low and zero-speed operation," IEEE Trans. Ind. Electron., vol. 57, no. 12, pp. 4065-4074, Dec. 2010.
5. I. Kenichi, U. Hideo, K. Minoru, E. Tsunehiro, and M. Katsuo, "Microcomputer control for sensorless brushless motor," IEEE Trans. Ind. Appl., vol. IA-21, no. 3, pp. 595-601, May 1985.
6. Y. Inoue, K. Yamada, S. Morimoto, and M. Sanada, "Effectiveness of voltage error compensation and parameter identification for model-based sensorless control of IPMSM," IEEE Trans. Ind. Appl., vol. 45, no. 1, pp. 213-221, Jan./Feb. 2009.
7. F. Genduso, R. Miceli, C. Rando, and G. Ricco Galluzzo, "Back-EMF sensorless control algorithm for high-dynamic-performance PMSM," IEEE Trans. Ind. Electron., vol. 57, no. 6, pp. 2092-2100, Jun. 2010.
8. A. Consoli, G. Scarcella, and A. Testa, "Industry application of zero-speed sensorless control techniques for PM synchronous motors," IEEE Trans. Ind. Appl., vol. 37, no. 2, pp. 513-521, Mar./Apr. 2001.
9. S.-Y. Kim and I.-J. Ha, "A new observer design method for HF signal injection sensorless control of IPMSMs," IEEE Trans. Ind. Electron., vol. 55, no. 6, pp. 2525-2529, Jun. 2008.
10. J. Holtz, "Acquisition of position error and magnet polarity for sensorless control of PM synchronous machines," IEEE Trans. Ind. Appl., vol. 44, no. 4, pp. 1172-1180, Jul./Aug. 2008.
11. A. Piippo, M. Hinkkanen, and J. Luomi, "Adaptation of motor parameters in sensorless PMSM drives," IEEE Trans. Ind. Appl., vol. 45, no. 1, pp. 203-212, Jan./Feb. 2009.
12. N. Bianchi, S. Bolognani, J.-H. Jang, and S.-K. Sul, "Advantages of inset PM machines for zero-speed sensorless position detection," IEEE Trans. Ind. Appl., vol. 44, no. 4, pp. 1190-1198, Jul./Aug. 2008.
13. A. Piippo, M. Hinkkanen, and J. Luomi, "Signal injection in sensorless PMSM drives equipped with inverter output filter," IEEE Trans. Ind. Appl., vol. 44, no. 5, pp. 1614-1620, Sep./Oct. 2008.
14. A. A. Khan and O. A.Mohammed, "Parameter optimization for sensorless position and speed control of permanent-magnet motor at low speed using genetic algorithm," in Proc. Power Syst. Conf. Expo., Mar. 15-18, 2009, pp. 1-5.
15. J. Yang and C. Song, "Sensorless control of surface permanent-magnet synchronous motor at low speed," in Proc. Int. Conf. Elect. Mach. Syst., Oct. 17-20, 2008, pp. 1621-1624.
16. N. Bianchi and S. Bolognani, "Sensorless-oriented-design of PMmotors," IEEE Trans. Ind. Appl., vol. 45, no. 4, pp. 1249-1257, Jul./Aug. 2009.
17. A. Piippo, M. Hinkkanen, and J. Luomi, "Analysis of an adaptive observer for sensorless control of interior permanent-magnet synchronous motors," IEEE Trans. Ind. Electron., vol. 55, no. 2, pp. 570-576, Feb. 2008.
18. L. Harnefors and M. Hinkkanen, "Complete stability of reduced-order and full-order observers for sensorless IMdrives," IEEE Trans. Ind. Electron., vol. 55, no. 3, pp. 1319-1329, Mar. 2008.
19. T. Senjyu, Y. Noguchi, N. Urasaki, A. M. Howlader, A. Yona, and H. Sekine, "Position sensorless control for interior permanent-magnet synchronous motors using H8 flux observer," in Proc. Int. Conf. Elect. Mach. Syst., Oct. 17-20, 2008, pp. 984-989.
20. M. Hasegawa, S. Yoshioka, and K. Matsui, "Position sensorless control of interior permanent-magnet synchronous motors using unknown input observer for high-speed drives," IEEE Trans. Ind. Appl., vol. 45, no. 3, pp. 938-946, May/Jun. 2009.
21. G. Foo and M. F. Rahman, "Sensorless direct torque and flux-controlled IPM synchronous motor drive at very low speed without signal injection," IEEE Trans. Ind. Electron., vol. 57, no. 1, pp. 395-403, Jan. 2010.
22. I. Boldea, M. C. Paicu, and G.-D. Andreescu, "Active flux concept for motion sensorless unified AC drives," IEEE Trans. Power Electron., vol. 23, no. 5, pp. 2612-2618, Sep. 2008.
23. M. Rashed, P. F. A.MacConnell, A. F. Stronach, and P. Acarnley, "Sensorless indirect-rotor field-orientation speed control of a permanent-magnet synchronous motor with stator-resistance estimation," IEEE Trans. Ind. Electron., vol. 54, no. 3, pp. 1664-1675, Jun. 2007.
24. G. Foo and M. F. Rahman, "Sensorless sliding-mode MTPA control of an IPM synchronous motor drive using a sliding-mode observer and HF signal injection," IEEE Trans. Ind. Electron., vol. 57, no. 4, pp. 1270-1278, Apr. 2010.
25. G.-D. Andreescu, C. I. Pitic, F. Blaabjerg, and I. Boldea, "Combined flux observer with signal injection enhancement for wide speed range sensorless direct torque control of IPMSM drives," IEEE Trans. Energy Convers., vol. 23, no. 2, pp. 393-402, Jun. 2008.
26. H. Kim, J. Son, and J. Lee, "A high-speed sliding-mode observer for the sensorless speed control of a PMSM," IEEE Trans. Ind. Electron., vol. 58, no. 9, pp. 4069-4077, Sep. 2011.
27. V. Delli Colli, R. Di Stefano, and F. Marignetti, "A system-on-chip sensorless control for a permanent-magnet synchronous motor," IEEE Trans. Ind. Electron., vol. 57, no. 11, pp. 3822-3829, Nov. 2010.
28. S. Sayeef, G. Foo, and M. F. Rahman, "Rotor position and speed estimation of a variable structure direct-torque-controlled IPM synchronous motor drive at very low speeds including standstill," IEEE Trans. Ind. Electron., vol. 57, no. 11, pp. 3715-3723, Nov. 2010.
29. R. Wrobel, A. S. Budden, D. Salt, D. Holliday, P. H. Mellor, A. Dinu, and P. Sangha, "Rotor design for sensorless position estimation in permanentmagnet machines," IEEE Trans. Ind. Electron., vol. 58, no. 9, pp. 3815-3824, Sep. 2011.
30. R. Leidhold, "Position sensorless control of PM synchronous motors based on zero-sequence carrier injection," IEEE Trans. Ind. Electron., vol. 58, no. 12, pp. 5371-5379, Dec. 2011.
31. Z. Q. Zhu and L. M. Gong, "Investigation of effectiveness of sensorless operation in carrier-signal-injection-based sensorless-control methods," IEEE Trans. Ind. Electron., vol. 58, no. 8, pp. 3431-3439, Aug. 2011.
32. H. Kim and T. M. Jahns, "Current control for ac motor drives using a single dc-link current sensor and measurement voltage vectors," IEEE Trans. Ind. Appl., vol. 42, no. 6, pp. 1539-1547, Nov./Dec. 2006.
33. S. Soter, R. Wegener, J. Dopheide, and B. Kiffer, "Low-cost vector control for permanent-magnet-synchronmotor with only one DC-link current sensor for pumping application," in Proc. Int. Conf. Elect. Mach. Drives, May 15, 2005, pp. 174-177.
34. A. Piippo, K. Suomela, M. Hinkkanen, and J. Luomi, "Sensorless PMSM drive with DC-link current measurement," in Conf. Rec. IEEE IAS Annu. Meeting, Sep. 23-27, 2007, pp. 2371-2377.
35. M. Matsushita, H. Kameyama, Y. Ikeboh, and S. Morimoto, "Sine-wave drive for PM motor controlling phase difference between voltage and current by detecting inverter bus current," IEEE Trans. Ind. Appl., vol. 45, no. 4, pp. 1294-1300, Jul./Aug. 2009.
36. Y. Tomigashi, H. Hida, and K. Ueyama, "Voltage vector correction based on a novel coordinate transformation for motor current detection using a single shunt resistor," in Proc. 13th EPE, Sep. 2009, pp. 1-8.
37. H. Xu, "Lower cost sensorless vector control method for three-phase PMSMs that uses one-shunt current detection," in Conf. Rec. IEEE IAS Annu. Meeting, Oct. 2008, pp. 1-6.
38. D. P. Mareetic and E. M. Adžic, "Improved three-phase current reconstruction for induction motor drives with DC-link shunt," IEEE Trans. Ind. Electron., vol. 57, no. 7, pp. 2454-2462, Jul. 2010.
39. K. Sun, Q. Wei, L. Huang, and K. Matsuse, "An overmodulation method for PWM-inverter-fed IPMSM drive with single current sensor," IEEE Trans. Ind. Electron., vol. 57, no. 10, pp. 3395-3404, Oct. 2010.
40. B. K. Bose, Power Electronics and Motor Drives: Advances and Trends. New York: Academic, 2006.
41. D. G. Holmes, "The general relationship between regular-sampled pulsewidth modulation and space vector modulation for hard switched converters," in Conf. Rec. IEEE IAS Annu. Meeting, 1992, vol. 1, pp. 1002-1009.
42. M. P. Kazmierkowski, R. Krishnan, and F. Blaabjerg, Control in Power Electronics. New York: Academic, 2002.
43. Y.-J. Lee, Y.-J. Yoon, Y.-H. Kim, and M.-H. Lee, "A study on the sensorless PMSM control using the superposition theory," Int. J. Korean Soc. Precision Eng., vol. 4, no. 2, pp. 5-12, Mar. 2003.
44. P. C. Krause, O. Wasynczuk, and S. D. Sudhoff, Analysis of Electric Machinery and Drives Systems. Piscataway, NJ: IEEE Press, 2002.