Studies on friction in an iron-steel tribo-system under dry and lubricated conditions

Materials and Manufacturing Processes

Volumn 23, Issue 7, 2008, Pages 698-707

  Menezes, Pradeep L ^a   Kishore, ^a   Kailas, Satish V ^a  

^a INDIAN INSTITUTE OF SCIENCE   (India)

Author keywords

Abrasion; Friction; Hardness; Iron; Lubrication; Optical profilometer; Pin on plate sliding tester; Plastic deformation; Roughness; Roughness parameters; Scanning electron micorscopy; Scratches; Sliding; Soft materials; Surface texture; Transfer Layer

Indexed keywords

CURING; DRYING; ELECTRON BEAM LITHOGRAPHY; FILMS; IRON; SCANNING ELECTRON MICROSCOPY; STATISTICAL METHODS; STEEL; STRUCTURAL PANELS; SURFACE ROUGHNESS; TEXTURES; TRIBOLOGY;

ABRASION; CO-EFFICIENT OF FRICTION; CONTACT SURFACES; DATA ANALYSIS; HARDNESS; LUBRICATION; OPTICAL PROFILOMETER; PIN-ON-PLATE SLIDING TESTER; PLASTIC DEFORMATION; PURE IRON; ROUGHNESS; ROUGHNESS PARAMETERS; SCANNING ELECTRON MICORSCOPY; SCANNING ELECTRON MICROSCOPE; SCRATCHES; SLIDING; SOFT MATERIALS; STEEL PLATES; STEEL SURFACES; SURFACE ROUGHNESS PARAMETERS; SURFACE TEXTURE; SURFACE TEXTURING; TRANSFER LAYER; TRANSFER LAYERS;

FRICTION;

EID: 50249098703     PISSN: 10426914     EISSN: 15322475     Source Type: Journal    
DOI: 10.1080/10426910802317086     Document Type: Article

References (29)

1. Buckley, D.H. Friction characteristics in vacuum of single and polycrystalline aluminum oxide in contact with themselves and with various metals. ASLE Trans. 1967, 10, 134-145.
2. Lim, S.C.; Ashby, M.F.; Brunton, J.H. The effects of sliding conditions on the dry friction of metals. Acta Metallurgica 1989, 37 (3), 767-772.
3. Czichos, H.; Habig, K.-H. Wear of medium carbon steel: A systematic study of the influences of materials and operating parameters. Wear 1986, 110 (3-4), 389-400.
4. Kayaba, T. A study of the wear and friction of some bearing materials. Wear 1962, 5(3), 173-181.
5. Mokhtar, M.O.A.; Zaki, M.; Shawki, G.S.A. Correlation between the frictional behaviour and the physical properties of metals. Wear 1980, 65 (1), 29-34.
6. Mokhtar, M.O.A.; Zaki, M.; Shawki, G.S.A. Effect of mechanical properties on frictional behaviour of metals. Tribology International 1979, 12 (6), 265-268.
7. Lanzon, J.M.; Cardew-Hall, M.J.; Hodgson, P.D. Characterising frictional behaviour in sheet metal forming. Journal of Materials Processing Technology 1998, 80-81, 251-256.
8. Menezes, P.L.; Kishore; Sasidhar, Y.; Kailas, S.V. Role of Surface Topography on Friction and Transfer Layer Formation: A Study using Inclined Scratch Test, Proceedings of the World Tribology Congress III, Washington D.C., USA, 2005, 151-152.
9. Määttä, A.; Vuoristo, P.; Mäntylä, T. Friction and adhesion of stainless steel strip against tool steels in unlubricated sliding with high contact load. Tribology International 2001, 34 (11), 779-786.
10. Staph, H.E.; Ku, P.M.; Carper, H.J. Effect of surface roughness and surface texture on scuffing. Mechanism and Machine Theory 1973, 8, 197-208.
11. Menezes, P.L.; Kishore; Kailas, S.V. Effect of roughness parameter and grinding angle on coefficient of friction when sliding of Al-Mg alloy over EN8 steel. ASME: Journal of Tribology 2006, 128 (4), 697-704.
12. Lakshmipathy, R.; Sagar, R. Effect of die surface topography on die-work interfacial friction in open die forging. International Journal of Machine Tools and Manufacture 1992, 32 (5), 685-693.
13. Malayappan, S.; Narayanasamy, R. An experimental analysis of upset forging of aluminium cylindrical billets considering the dissimilar frictional conditions at flat die surfaces. Int. J. Adv. Manuf. Technol. 2004, 23, 636-643.
14. Hu, Z.M.; Dean, T.A. A study of surface topography, friction and lubricants in metal forming. International Journal of Machine Tools and Manufacture 2000, 40 (11), 1637-1649.
15. Menezes, P.L.; Kishore; Kailas, S.V. Studies on friction and transfer layer using inclined scratch. Tribology International 2006, 39 (2), 175-183.
16. Menezes, P.L.; Kishore; Kailas, S.V. Effect of directionality of unidirectional grinding marks on friction and transfer layer formation of Mg on steel using inclined scratch test. Materials Science and Engineering A 2006, 429 (1-2), 149-160.
17. Menezes, P.L.; Kishore; Kailas, S.V. Influence of surface texture on coefficient of friction and transfer layer formation during sliding of pure magnesium pin on 080 M40 (EN8) steel plate. Wear 2006, 261 (5-6), 578-591.
18. Menezes, P.L.; Kishore; Kailas, S.V. Studies on friction and transfer layer: Role of surface texture. Tribology Letters 2006, 24 (3), 265-273.
19. Menezes, P.L.; Kishore; Shimjith, M.; Kailas, S.V. Role of surface texture on friction and transfer layer formation when Mg-8Al alloy slid against steel counterface. Indian Journal of Tribology 2007, 2 (1), 46-54.
20. Menezes, P.L.; Kishore; Kailas, S.V. Effect of Surface Topography on Friction and Transfer Layer Formation During Sliding, Proceedings of The Third Asia International Conference on Tribology (ASIATRIB 2006), Kanazawa, Japan, 2006, 113-114.
21. Gadelmawla, E.S.; Koura, M.M.; Maksoud, T.M.A.; Elewa, I.M.; Soliman, H.H. Roughness parameters. Journal of Materials Processing Technology 2002, 123 (1), 133-145.
22. Lundberg, J. Influence of surface roughness on normal-sliding lubrication. Tribology International 1995, 28 (5), 317-322.
23. Myers, N.O. Characterization of surface roughness. Wear 1962, 5 (3), 182-189.
24. Singh, R.; Melkote, S.N.; Hashimoto, F. Frictional response of precision finished surfaces in pure sliding. Wear 2005, 258 (10), 1500-1509.
25. Feder, J. Fractals; Plenum Press: New York, 1988.
26. Hasegawa, M.; Liu, J.; Okuda, K.; Nunobiki, M. Calculation of fractal dimension of machined surface profiles. Wear 1996, 192 (1-2), 40-45.
27. Pamies-Teixeira, J.J.; Saka, N.; Suh, N.P. Wear of copper-based solid solutions. Wear 1977, 44 (1), 65-75.
28. Panagopoulos, C.N.; Georgarakis, K.G.; Anagnostopoulou, A. The influence of grain size on the sliding wear behaviour of zinc. Materials Letters 2006, 60, 133-136.
29. Mokhtar, M.O.A. The effect of hardness on the frictional behaviour of metals. Wear 1982, 78 (3), 297-304.