Flax fibre reinforced PLA/TPS biocomposites flame retarded with multifunctional additive system

Polymer Degradation and Stability

Volumn 106, Issue , 2014, Pages 63-73

  Bocz, Katalin ^a   Szolnoki, Beáta ^a   Marosi, Attila ^b   Tábi, Tamás ^a   Wladyka Przybylak, Maria ^c   Marosi, György ^a  

^a BUDAPEST UNIVERSITY OF TECHNOLOGY AND ECONOMICS   (Hungary)

^b SEMMELWEIS UNIVERSITY   (Hungary)

^c INSTITUTE OF NATURAL FIBRES AND MEDICINAL PLANTS   (Poland)

Author keywords

Fibre treatment; Flame retardancy; Natural fibre reinforcement; Plasticizer; Polylactic acid; Thermoplastic starch

Indexed keywords

BIODEGRADABLE POLYMERS; FIBERS; FLAMMABILITY; FLAX; LINEN; PLASTICIZERS; POLYMER BLENDS; REINFORCED PLASTICS; REINFORCEMENT; STARCH; YARN;

AMMONIUM POLYPHOSPHATES; BIODEGRADABLE COMPOSITES; FIBRE REINFORCEMENTS; FLAME RETARDANCY; MULTIFUNCTIONAL ADDITIVES; POLY LACTIC ACID; STRENGTH AND STIFFNESS; THERMOPLASTIC STARCH;

LOADING;

EID: 84902535307     PISSN: 01413910     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.polymdegradstab.2013.10.025     Document Type: Article

References (37)

1. T. Tábi, P. Tamás, and J.G. Kovács Chopped basalt fibres: a new perspective in reinforcing poly(lactic acid) to produce injection moulded engineering composites from renewable and natural resources Express Polym Lett 7 2013 107 119
2. M.A. Huneault, and H. Li Morphology and properties of compatibilized polylactide/thermoplastic starch blends Polymer 48 2007 270 280 (Pubitemid 44918050)
3. C. Reti, M. Casetta, S. Duquesne, S. Bourbigot, and R. Delobel Flammability properties of intumescent PLA including starch and lignin Polym Adv Technol 19 2008 628 635
4. O. Faruka, A.K. Bledzkia, H.P. Fink, and M. Saind Biocomposites reinforced with natural fibers: 2000-2010 Prog Polym Sci 37 2012 1552 1596
5. C. Courgneau, D. Rusu, C. Henneuse, V. Ducruet, M.F. Lacrampe, and P. Krawczak Characterisation of low-odour emissive polylactide/cellulose fibre biocomposites for car interior Express Polym Lett 7 2013 787 804
6. S. Bourbigot, and G. Fontaine Flame retardancy of polylactide: an overview Polym Chem 1 2010 1413 1422
7. D.Y. Wang, Y.P. Song, L. Lin, X.L. Wang, and Y.Z. Wang A novel phosphorus-containing poly(lactic acid) toward its flame retardation Polymer 52 2011 233 238
8. L.L. Wei, D.Y. Wang, H.B. Chen, L. Chen, X.L. Wang, and Y.Z. Wang Effect of a phosphorus-containing flame retardant on the thermal properties and ease of ignition of poly(lactic acid) Polym Degrad Stab 96 2011 1557 1561
9. J. Zhan, L. Song, S. Nie, and Y. Hu Combustion properties and thermal degradation behavior of polylactide with an effective intumescent flame retardant Polym Degrad Stab 94 2009 291 296
10. C.H. Ke, J. Li, K.Y. Fang, Q.L. Zhu, J. Zhu, and Q. Yan et al. Synergistic effect between a novel hyperbranched charring agent and ammonium polyphosphate on the flame retardant and anti-dripping properties of polylactide Polym Degrad Stab 95 2010 763 770
11. K. Bocz, B. Szolnoki, M. Wladyka-Przybylak, K. Bujnowicz, Gy Harakály, and B. Bodzay et al. Flame retardancy of biocomposites based on thermoplastic starch Polimery 58 2013 385 394
12. S. Liodakis, I.K. Fetsis, and I.P. Agiovlasitis The fire-retarding effect of inorganic phosphorus compounds on the combustion of cellulosic materials J Therm Anal Calorim 98 2009 285 291
13. S. Gaan, and G. Sun Effect of phosphorus flame retardants on thermo-oxidative decomposition of cotton Polym Degrad Stab 92 2007 968 974 (Pubitemid 46734332)
14. N.P.G. Suardana, M.S. Ku, and J.K. Lim Effects of diammonium phosphate on the flammability and mechanical properties of bio-composites Mater Des 32 2011 1990 1999
15. S. Nam, B.D. Condon, D.V. Parikh, Q. Zhao, M.S. Cintrón, and C. Madison Effect of urea additive on the thermal decomposition of greige cotton nonwoven fabric treated with diammonium phosphate Polym Degrad Stab 96 2011 2010 2018
16. S. Nam, B.D. Condon, R.H. White, Q. Zhao, F. Yao, and M.S. Cintrón Effect of urea additive on the thermal decomposition kinetics of flame retardant greige cotton nonwoven fabric Polym Degrad Stab 97 2012 738 746
17. Y. Xie, C.A.S. Hill, Z. Xiao, H. Militz, and C. Mai Silane coupling agents used for natural fiber/polymer composites: a review Compos Part A Appl S 41 2010 806 819
18. A. Arbelaiz, B. Fernández, J.A. Ramos, and I. Mondragon Thermal and crystallization studies of short flax fibre reinforced polypropylene matrix composites: effect of treatments Thermochim Acta 440 2006 111 121 (Pubitemid 43053137)
19. P.T. Anastas, and J.C. Warner Green chemistry: theory and practice 1998 Oxford University Press New York 30
20. F.J. Rodriguez-Gonzalez, B.A. Ramsay, and B.D. Favis Rheological and thermal properties of thermoplastic starch with high glycerol content Carbohyd Polym 58 2014 139 147
21. A.L.M. Smits, P.H. Kruiskamp, J.J.G. van Soest, and J.F.G. Vliegenthart Interaction between dry starch and plasticisers glycerol or ethylene glycol, measured by differential scanning calorimetry and solid state NMR spectroscopy Carbohyd Polym 53 2003 409 416
22. J.D. Flores, J. Shin, C.E. Hoyle, and C.L. McCormick Direct RAFT polymerization of an unprotected isocyanate-containing monomer and subsequent structopendant functionalization using "click"-type reactions Polym Chem 1 2010 213 220
23. P. Jumaryatno, K. Rands-Trevor, J.T. Blanchfield, and M.J. Garson Isocyanates in marine sponges: axisocyanate-3, a new sesquiterpene from Acanthella cavernosa Arkivoc 7 2007 157 166
24. M.A. Khan, and M.M. Hassan Effect of γ-aminopropyl trimethoxy silane on the performance of jute-polycarbonate composites J Apply Polym Sci 100 2006 4142 4154 (Pubitemid 43666814)
25. A. Valadez-Gonzalez, J.M. Cervantes-Uc, R. Olayo, and P.J. Herrera-Franco Chemical modification of henequen fibers with an organosilane coupling agent Compos Part B-Eng 30 1999 321 331
26. I. Rusznák Finishing of textile fabrics by the termotex process Text Rec J 43 1973 128 132
27. J. Alongi, M. Ciobanu, and G. Malucelli Novel flame retardant finishing systems for cotton fabrics based on phosphorus-containing compounds and silica derived from sol-gel processes Carbohyd Polym 85 2011 599 608
28. G. Brancatelli, C. Colleoni, M.R. Massafra, and G. Rosace Effect of hybrid phosphorus-doped silica thin films produced by sol-gel method on the thermal behavior of cotton fabrics Polym Degrad Stab 96 2011 483 490
29. M. Le Bras, S. Duquesne, M. Fois, M. Grisel, and F. Poutch Intumescent polypropylene/flax blends: a preliminary study Polym Degrad Stab 88 2005 80 84 (Pubitemid 40245002)
30. D. Chen, J. Li, and J. Ren Combustion properties and transference behavior of ultrafine microencapsulated ammonium polyphosphate in ramie fabric-reinforced poly(L-lactic acid) biocomposites Polym Int 60 2011 599 606
31. L. Shumao, R. Jie, Y. Hua, Y. Tao, and Y. Weizhong Influence of ammonium polyphosphate on the flame retardancy and mechanical properties of ramie fiber-reinforced poly(lactic acid) biocomposites Polym Int 59 2010 242 248
32. X. Wang, Y. Hu, L. Song, S. Xuan, W. Xing, and Z. Bai et al. Flame retardancy and thermal degradation of intumescent flame retardant poly(lactic acid)/starch biocomposites Ind Eng Chem Res 50 2011 713 720
33. J.X. Feng, S.P. Sub, and J. Zhua An intumescent flame retardant system using β-cyclodextrin as a carbon source in polylactic acid (PLA) Polym Adv Technol 22 2011 1115 1122
34. O. Martin, and L. Avérous Poly(lactic acid): plasticization and properties of biodegradable multiphase systems Polymer 42 2001 6209 6219 (Pubitemid 32323229)
35. E.d.M. Teixeira, A.A.S. Curvelo, A.C. Corrêa, J.M. Marconcini, G.M. Glenn, and L.H.C. Mattoso Properties of thermoplastic starch from cassava bagasse and cassava starch and their blends with poly (lactic acid) Ind Crop Prod 37 2012 61 68
36. C. Yokesahachart, and R. Yoksan Effect of amphiphilic molecules on characteristics and tensile properties of thermoplastic starch and its blends with poly(lactic acid) Carbohyd Polym 83 2011 22 31
37. F. Shukor, A. Hassan, M.S. Islam, M. Mokhtar, and M. Hasan Effect of ammonium polyphosphate on flame retardancy, thermal stability and mechanical properties of Alkali treated Kenaf fiber filled PLA biocomposites Mater Des 54 2014 425 429