Characterisation of low-odour emissive polylactide/cellulose fibre biocomposites for car interior

Express Polymer Letters

Volumn 7, Issue 9, 2013, Pages 787-804

  Courgneau, C ^a   Rusu, D ^a   Henneuse, C ^b   Ducruet, V ^c   Lacrampe, M F ^a   Krawczak, P ^a  

^a ECOLE DES MINES DE DOUAI   (France)

^b CERTECH ASBL   (Belgium)

^c Université Paris Saclay   (France)

Author keywords

Absorbent particles; Biocomposites; Cellulose fibres; Odour emission; Polylactide

Indexed keywords

BIO-COMPOSITES; CELLULOSE FIBRES; DYNAMIC DILUTION; INJECTION MOULDED; MECHANICAL AND THERMAL PROPERTIES; ODOUR CONCENTRATIONS; ODOUR EMISSIONS; POLY LACTIDE;

ABSORPTION; DIFFERENTIAL SCANNING CALORIMETRY; INJECTION MOLDING; POLYESTERS; THERMOGRAVIMETRIC ANALYSIS;

COMPOSITE MATERIALS;

ABSORPTION; CELLULOSE FIBERS; COMPOSITES; EMISSION; GRAVIMETRY; INJECTION MOLDING; ODOR CONTROL; POLYESTERS; THERMAL ANALYSIS;

EID: 84879485338     PISSN: 1788618X     EISSN: None     Source Type: Journal    
DOI: 10.3144/expresspolymlett.2013.76     Document Type: Article

References (61)

1. European Commission: Directive 2000/53/EC of the European parliament and the council of 18 Septembre 2000 on end-of-life vehicles. Official Journal of the European Communities (2000).
2. Rusu D., Boyer S. A. E., Lacrampe M. F., Krawczak P.: Bioplastics and vegetal fiber reinforced bioplastics for automotive applications. in 'Handbook of bioplastics and biocomposites engineering applications' (Ed.: Pilla S.), Wiley-Scrivener, Weinheim, 397-448 (2011). DOI: 10.1002/9781118203699.ch15
3. Thouzeau C., Henneuse C., Sclavons M., Devaux J., Soulestin J., Stoclet G.: Emission of volatile organic compounds during processing and use of organoclaybased nanocomposites. Polymer Degradation and Stability, 98, 557-565 (2013). DOI: 10.1016/j.polymdegradstab.2012.11.019
4. Kolstad J. J.: Crystallization kinetics of poly(L-lactide-co-meso-lactide). Journal of Applied Polymer Science, 62, 1079-1091 (1996). DOI: 10.1002/(SICI)1097-4628(19961114)62:7<1079::AID-APP14>3.0.CO;2-1
5. Kalia S., Avérous L., Domenek S., Courgneau C., Ducruet V.: Characteristics and applications of poly (lactide). in 'Biopolymers: Biomedical and environmental applications' (Eds.: Kalia S., Avérous L.) Wiley, Weinheim, 183-224 (2011). DOI: 10.1002/9781118164792.ch8
6. rdInternational Conference on Biodegradable and Bio-based Polymers, BIOPOL 2011, Strasbourg, France' O-079 (2011).
7. Julien J-M., Bénézet J-C., Lafranche E., Quantin J. C., Bergeret A., Lacrampe M. F., Krawczak P.: Development of poly(lactic acid) cellular materials: Physical and morphological characterizations. Polymer, 53, 5885-5895 (2012). DOI: 10.1016/j.polymer.2012.10.005
8. Lim L-T., Auras R., Rubino M.: Processing technologies for poly(lactic acid). Progress in Polymer Science, 33, 820-852 (2008). DOI: 10.1016/j.progpolymsci.2008.05.004
9. Tessier R., Lafranche E., Krawczak P.: Development of novel melt-compounded starch-grafted polypropylene/ polypropylene-grafted maleic anhydride/organoclay ternary hybrids. Express Polymer Letters, 6, 937-952 (2012). DOI: 10.3144/expresspolymlett.2012.99
10. Lafranche E., Krawczak P., Ciolczyk J-P., Maugey J.: Injection moulding of long glass fiber reinforced poly-amide 66: Processing conditions/microstructure/flexural properties relationship. Advances in Polymer Technology, 24, 114-131 (2005). DOI: 10.1002/adv.20035
11. Lafranche E., Krawczak P., Ciolczyk J. P., Maugey J.: Injection moulding of long glass fibre reinforced polyamide 6-6: Guidelines to improve flexural properties. Express Polymer Letters 1, 456-466 (2007). DOI: 10.3144/expresspolymlett.2007.64
12. Cilleruelo L., Lafranche E., Krawczak P., Pardo P., Lucas P.: Injection moulding of long glass fibre reinforced poly(ethylene terephtalate): Influence of carbon black and nucleating agents on impact properties. Express Polymer Letters, 6, 706-718 (2012). DOI: 10.3144/expresspolymlett.2012.76
13. Martins C. I., Lemos-Oliveira V. M., Lafranche E.: Processing, mechanical properties and morphology of injection moulding flax fibres reinforced polypropylene. in 'Proceedings of POLYCHAR 20, World Forum on Advanced Materials, Dubrovnik, Croatia', O 2-023 (2012).
14. thChina-Europe Symposium on Processing and Properties of Reinforced Polymers, Guilin, China' O-085 (2009).
15. Soulestin J., Quiévy N., Sclavons M., Devaux J.: Polyolefins-biofibre composites: A new way for an industrial production. Polymer Engineering and Science, 47, 467-476 (2007). DOI: 10.1002/pen.20706
16. thAnnual Meeting of the Polymer Processing Society, Symposium on Polymer Composites, Goa, India' GS-III:O7 (2009).
17. Holbery J., Houston D.: Natural-fiber-reinforced polymer composites in automotive applications. Journal of the Minerals. Metals and Materials Society, 58, 80-86 (2006). DOI: 10.1007/s11837-006-0234-2
18. van Voorn B., Smit H. H. G., Sinke R. J., de Klerk B.: Natural fibre reinforced sheet moulding compound. Composites Part A: Applied Science and Manufacturing, 32, 1271-1279 (2001). DOI: 10.1016/S1359-835X(01)00085-9
19. Suddell B. C., Evans W. J.: Natural fiber composites in automotive applications. in 'Natural fibers, biopolymers and biocomposites' (Eds.: Mohanty A. K., Misra M., Drzal L. T.) CRC Press, Boca Raton, 237-266 (2005). DOI: 10.1201/9780203508206.ch7
20. Summerscales J., Dissanayake N., Virk A, Hall W.: A review of bast fibres and their composites. Part 2-Composites. Composites Part A: Applied Science and Manufacturing, 41, 1336-1344 (2010). DOI: 10.1016/j.compositesa.2010.05.020
21. Bledzki A. K., Faruk O., Sperber V. E.: Cars from biofibres. Macromolecular Materials and Engineering, 291, 449-457 (2006). DOI: 10.1002/mame.200600113
22. Yang H., Yan R., Chen H., Lee D. H., Zheng C.: Characteristics of hemicellulose, cellulose and lignin pyrolysis. Fuel, 86, 1781-1788 (2007). DOI: 10.1016/j.fuel.2006.12.013
23. Gassan J., Bledzki A. K.: Thermal degradation of flax and jute fibers. Journal of Applied Polymer Science, 82, 1417-1422 (2001). DOI: 10.1002/app.1979
24. Ellison G. C., McNaught R., Eddleston E. P.: The use of natural fibres in nonwoven structures for applications as automotive component substrates. Ministry of Agriculture Fisheries and Food Agri-Industrial Materials, Research and development report (2000).
25. Oksman K., Skrifvars M., Selin J-F.: Natural fibres as reinforcement in polylactic acid (PLA) composites. Composites Science and Technology, 63, 1317-1324 (2003). DOI: 10.1016/S0266-3538(03)00103-9
26. Bodros E., Pillin I., Montrelay N., Baley C.: Could biopolymers reinforced by randomly scattered flax fibre be used in structural applications? Composites Science and Technology, 67, 462-470 (2007). DOI: 10.1016/j.compscitech.2006.08.024
27. Akil H. M., Omar M. F., Mazuki A. A. M., Safiee S., Ishak Z. A. M., Abu Bakar A.: Kenaf fiber reinforced composites: A review. Materials and Design, 32, 4107-4121 (2011). DOI: 10.1016/j.matdes.2011.04.008
28. Masirek R., Kulinski Z., Chionna D., Piorkowska E., Pracella M.: Composites of poly(L-lactide) with hemp fibers: Morphology and thermal and mechanical properties. Journal of Applied Polymer Science, 105, 255-268 (2007). DOI: 10.1002/app.26090
29. Mathew A. P., Oksman K., Sain M.: The effect of morphology and chemical characteristics of cellulose reinforcements on the crystallinity of polylactic acid. Journal of Applied Polymer Science, 101, 300-310 (2006). DOI: 10.1002/app.23346
30. Gregorova A., Sedlarik V., Pastorek M., Jachandra H., Stelzer F.: Effect of compatibilizing agent on the properties of highly crystalline composites based on poly (lactic acid) and wood flour and/or mica. Journal of Polymers and the Environment, 19, 372-381 (2011). DOI: 10.1007/s10924-011-0292-6
31. Graupner N., Herrmann A. S., Müssig J.: Natural and man-made cellulose fibre-reinforced poly(lactic acid) (PLA) composites: An overview about mechanical characteristics and application areas. Composites Part A: Applied Science and Manufacturing, 40, 810-821 (2009). DOI: 10.1016/j.compositesa.2009.04.003
32. Bax B., Müssig J.: Impact and tensile properties of PLA/Cordenka and PLA/flax composites. Composites Science and Technology, 68, 1601-1607 (2008). DOI: 10.1016/j.compscitech.2008.01.004
33. Pan P., Zhu B., Kai W., Serizawa S., Iji M., Inoue Y.: Crystallization behavior and mechanical properties of bio-based green composites based on poly(L-lactide) and kenaf fiber. Journal of Applied Polymer Science, 105, 1511-1520 (2007). DOI: 10.1002/app.26407
34. Mathew A. P., Oksman K., Sain M.: Mechanical properties of biodegradable composites from poly lactic acid (PLA) and microcrystalline cellulose (MCC). Journal of Applied Polymer Science, 97, 2014-2025 (2005). DOI: 10.1002/app.21779
35. ndInternational Meeting on Material/Bioproduct Interaction, MATBIM 2012, Dijon, France' O-57 (2012).
36. thEdition "Emissions and odours from materials", Bruxelles, Belgium' O 3-3 (2012).
37. Kim H-S., Kim S., Kim H-J., Kim H-G.: Physicomechanical properties, odor and VOC emission of bioflour-filled poly(propylene) bio-composites with different volcanic pozzolan contents. Macromolecular Materials and Engineering, 291, 1255-1264 (2006). DOI: 10.1002/mame.200600212
38. Kim K-W., Lee B-H., Kim S., Kim H-J., Yun J-H., Yoo S-E., Sohn J. R.: Reduction of VOC emission from natural flours filled biodegradable bio-composites for automobile interior. Journal of Hazardous Materials, 187, 37-43 (2011). DOI: 10.1016/j.jhazmat.2010.07.075
39. Kim H-S., Lee B-H., Kim H-J., Yang H-S.: Mechanical-thermal properties and VOC emissions of naturalflour-filled biodegradable polymer hybrid bio-composites. Journal of Polymers and the Environment, 19, 628-636 (2011). DOI: 10.1007/s10924-011-0313-5
40. Fischer E. W., Sterzel H. J., Wegner G.: Investigation of the structure of solution grown crystals of lactide copolymers by means of chemical reactions. Kolloid-Zeitschrift und Zeitschrift für Polymere, 251, 980-990 (1973). DOI: 10.1007/BF01498927
41. Jaubert J. N., Tapiero C., Dore J. C.: The field of odors: Toward a universal language for odor relationships. Perfumer and Flavorist, 20, 1-16 (1995).
42. Frone A. N., Berlioz S., Chailan J-F., Panaitescu D. M., Donescu D.: Cellulose fiber-reinforced polylactic acid. Polymer Composites, 32, 976-985 (2011). DOI: 10.1002/pc.21116
43. Huda M. S., Mohanty A. K., Drzal L. T., Schut E., Misra M.: 'Green' composites from recycled cellulose and poly(lactic acid): Physico-mechanical and morphological properties evaluation. Journal of Materials Science, 40, 4221-4229 (2005). DOI: 10.1007/s10853-005-1998-4
44. van den Oever M. J. A., Beck B., Müssig J.: Agrofibre reinforced poly(lactic acid) composites: Effect of moisture on degradation and mechanical properties. Composites Part A: Applied Science and Manufacturing, 41, 1628-1635 (2010). DOI: 10.1016/j.compositesa.2010.07.011
45. Wang Y., Steinhoff B., Brinkmann C., Alig I.: In-line monitoring of the thermal degradation of poly(L-lactic acid) during melt extrusion by UV-vis spectroscopy. Polymer, 49, 1257-1265 (2008). DOI: 10.1016/j.polymer.2008.01.010
46. Carrasco F., Pagès P., Gámez-Pérez J., Santana O. O., Maspoch M. L.: Processing of poly(lactic acid): Characterization of chemical structure, thermal stability and mechanical properties. Polymer Degradation and Stability, 95, 116-125 (2010). DOI: 10.1016/j.polymdegradstab.2009.11.045
47. Pillin I., Montrelay N., Bourmaud A., Grohens Y.: Effect of thermo-mechanical cycles on the physicochemical properties of poly(lactic acid). Polymer Degradation and Stability, 98, 321-328 (2008). DOI: 10.1016/j.polymdegradstab.2007.12.005
48. Jakab E., Mészáros E., Borsa J.: Effect of slight chemical modification on the pyrolysis behavior of cellulose fibers. Journal of Analytical and Applied Pyrolysis, 87, 117-123 (2010). DOI: 10.1016/j.jaap.2009.10.012
49. Mago A., Pyda M.: Study of crystalline and amorphous phases of biodegradable poly(lactic acid) by advanced thermal analysis. Polymer, 50, 3967-3973 (2009). DOI: 10.1016/j.polymer.2009.06.052
50. Zuza E., Ugartemendia J. M., Lopez A., Meaurio E., Lejardi A., Sarasua J-R.: Glass transition behavior and dynamic fragility in polylactides containing mobile and rigid amorphous fractions. Polymer, 49, 4427-4432 (2008). DOI: 10.1016/j.polymer.2008.08.012
51. Delpouve N., Saiter A., Dargent E.: Cooperativity length evolution during crystallization of poly(lactic acid). European Polymer Journal, 47, 2414-2423 (2011). DOI: 10.1016/j.eurpolymj.2011.09.027
52. Righetti M. C., Tombari E.: Crystalline, mobile amorphous and rigid amorphous fractions in poly(L-lactic acid) by TMDSC. Thermochimica Acta, 522, 118-127 (2011). DOI: 10.1016/j.tca.2010.12.024
53. Courgneau C., Domenek S., Lebossé R., Guinault A., Avérous L., Ducruet V.: Effect of crystallization on barrier properties of formulated polylactide. Polymer International, 61, 180-189 (2012). DOI: 10.1002/pi.3167
54. Guinault A., Sollogoub C., Ducruet V., Domenek S.: Impact of crystallinity of poly(lactide) on helium and oxygen barrier properties. European Polymer Journal, 48, 779-788 (2012). DOI: 10.1016/j.eurpolymj.2012.01.014
55. Pan P., Inoue Y.: Polymorphism and isomorphism in biodegradable polyesters. Progress in Polymer Science, 34, 605-640 (2009). DOI: 10.1016/j.progpolymsci.2009.01.003
56. De Rosa I. M., Iannoni A., Kenny J. M., Puglia D., Santulli C., Sarasini F., Terenzi A.: Poly(lactic acid)/ phormium tenax composites: Morphology and thermomechanical behavior. Polymer Composites, 32, 1362-1368 (2011). DOI: 10.1002/pc.21159
57. Lee S-H., Wang S.: Biodegradable polymers/bamboo fiber biocomposite with bio-based coupling agent. Composites Part A: Applied Science and Manufacturing, 37, 80-91 (2006). DOI: 10.1016/j.compositesa.2005.04.015
58. Bismarck A., Mishra S., Lampke T.: Plant fibers as reinforcement for green composites. in. 'Natural fibers, biopolymers and biocomposites' (Eds.: Mohanty A. K., Misra M., Drzal L. T) CRC Press, Boca Raton, 37-108 (2005).
59. Qiu W., Zhang F., Endo T., Hirotsu T.: Preparation and characteristics of composites of high-crystalline cellulose with polypropylene: Effects of maleated poly-propylene and cellulose content. Journal of Applied Polymer Science, 87, 337-345 (2003). DOI: 10.1002/app.11446
60. Yuzay I. E., Auras R., Selke S.: Poly(lactic acid) and zeolite composites prepared by melt processing: Morphological and physical-mechanical properties. Journal of Applied Polymer Science, 115, 2262-2270 (2010). DOI: 10.1002/app.31322
61. Auras R., Selke S., Yuzay I. E.: Poly(lactic acid) and zeolite composites and method of manufacturing the same. U.S. Patent 20100236969 A1, USA (2010).