Effect of double-layer application on dentin bond durability of onestep self-etch adhesives

Operative Dentistry

Volumn 39, Issue 4, 2014, Pages 416-426

  Taschner, M ^a   Kummerling M ^a   Lohbauer, U ^b   Breschi, L ^c   Petschelt, A ^a   Frankenberger, R ^d  

^a UNIVERSITY HOSPITAL ERLANGEN   (Germany)

^b Dental Clinic 1 Dental Materials Lab   (Germany)

^c UNIVERSITY OF BOLOGNA   (Italy)

^d PHILIPPS UNIVERSITY MARBURG   (Germany)

Author keywords

[No Author keywords available]

Indexed keywords

ADHESIVE AGENT;

DENTAL BONDING; DENTIN; MATERIALS TESTING; PROCEDURES; SCANNING ELECTRON MICROSCOPY;

ADHESIVES; DENTAL BONDING; DENTIN; MATERIALS TESTING; MICROSCOPY, ELECTRON, SCANNING;

EID: 84902175960     PISSN: 03617734     EISSN: None     Source Type: Journal    
DOI: 10.2341/13-168-L     Document Type: Article

References (51)

1. Wilson NH, Gordan VV, Brunton PA, Wilson MA, Crisp RJ, & Mjör IA (2006) Two-centre evaluation of a resin composite/ self-etching restorative system: three-year findings Journal of Adhesive Dentistry 8(1) 47-51.
2. Van Meerbeek B, De Munck J, Yoshida Y, Inoue S, Vargas M, Vijay P, Van Landuyt K, Lambrechts P, & Vanherle G (2003) Buonocore memorial lecture: adhesion to enamel and dentin: current status and future challenges Operative Dentistry 28(3) 215-235.
3. Van Meerbeek B, Yoshihara K, Yoshida Y, Mine A, De Munck J, & Van Landuyt KL (2011) State of the art of self-etch adhesives Dental Materials 27(1) 17-28.
4. Breschi L, Mazzoni A, Ruggeri A, Cadenaro M, Di Lenarda R, & De Stefano Dorigo E (2008) Dental adhesion review: aging and stability of the bonded interface Dental Materials 24(1) 90-101.
5. Liu Y, Tjäderhane L, Breschi L, Mazzoni A, Li N, Mao J, Pashley DH, & Tay FR (2011) Limitations in bonding to dentin and experimental strategies to prevent bond degradation Journal of Dental Research 90(8) 953-968.
6. Cadenaro M, Antoniolli F, Sauro S, Tay FR, Di Lenarda R, Prati C, Biasotto M, Contardo L, & Breschi L (2005) Degree of conversion and permeability of dental adhesives European Journal of Oral Science 113(6) 525-530.
7. Ye Q, Park JG, Topp E, Wang Y, Misra A, & Spencer P (2008) In vitro performance of nano-heterogeneous dentin adhesive Journal of Dental Research 87(9) 829-833.
8. Tay FR, Frankenberger R, Krejci I, Bouillaget S, Pashley DH, Carvalho RM, & Lai CN (2004) Single-bottle adhesives behave as permeable membranes after polymerization. I. In vivo evidence Journal of Dentistry 32(8) 611-621.
9. Albuquerque M, Pegoraro M, Mattei G, Reis A, & Loguercio AD (2008) Effect of double-application or the application of a hydrophobic layer for improved efficacy of one-step self-etch systems in enamel and dentin Operative Dentistry 33(5) 564-570.
10. Moszner N, Salz U, & Zimmermann J (2005) Chemical aspects of self-etching enamel-dentin adhesives: a systematic review Dental Materials 21(10) 895-910.
11. Belli R, Sartori N, Peruchi LD, Guimaraes JC, Vieira LC, Baratieri LN, & Monteiro S Jr (2011) Effect of multiple coats of ultra-mild all-in-one adhesives on bond strength to dentin covered with two different smear-layer thicknesses Journal of Adhesive Dentistry 13(6) 507-516.
12. King NM, Tay FR, Pashley DH, Hashimoto M, Ito S, Brackett WW, Garcia-Godoy F, & Sunico M (2005) Conversion of one-step to two-step self-etch adhesives for improved efficacy and extended application American Journal of Dentistry 18(2) 126-134.
13. Hashimoto M, Sano H, Yoshida E, Hori M, Kaga M, Oguchi H, & Pashley DH (2004) Effects of multiple adhesive coatings on dentin bonding Operative Dentistry 29(4) 416-423.
14. Ito S, Tay FR, Hashimoto M, Yoshiyama M, Saito T, Brackett WW, Waller JL, & Pashley DH (2005) Effects of multiple coatings of two all-in-one adhesives on dentin bonding Journal of Adhesive Dentistry 7(2) 133-141.
15. Pashley EL, Agee KA, Pashley DH, & Tay FR (2002) Effects of one versus two applications of an unfilled, allin- one adhesive on dentin bonding Journal of Dentistry 30(2-3) 83-90.
16. Wei S, Shimada Y, Sadr A, & Tagami J (2009) Effect of double-application of three single-step self-etch adhesives on dentin bonding and mechanical properties of resindentin area Operative Dentistry 34(6) 716-724.
17. Erhardt MC, Osorio R, Pisani-Proenca J, Aguilera FS, Osorio E, Breschi L, & Toledano M (2009) Effect of double layering and prolonged application time on MTBS of water/ethanol-based self-etch adhesives to dentin Operative Dentistry 34(5) 571-577.
18. Van Landuyt KL, De Munck J, Snauwaert J, Coutinho E, Poitevin A, Yoshida Y, Inoue S, Peumans M, Suzuki K, Lambrechts P, & Van Meerbeek B (2005) Monomersolvent phase separation in one-step self-etch adhesives Journal of Dental Research 84(2) 183-188.
19. Breschi L, Cadenaro M, Antoniolli F, Sauro S, Biasotto M, Prati C, Tay FR, & Di Lenarda R (2007) Polymerization kinetics of dental adhesives cured with LED: correlation between extent of conversion and permeability Dental Materials 23(9) 1066-1072.
20. Do Amaral RC, Stanislawczuk R, Zander-Grande C, Michel MD, Reis A, & Loguercio AD (2009) Active application improves the bonding performance of selfetch adhesives to dentin Journal of Dentistry 37(1) 82-90.
21. Reis A, Albuquerque M, Pegoraro M, Mattei G, Bauer J, Grande R, Klein-Junior C, Baumhardt-Neto R, & Loguercio A (2008) Can the durability of one-step selfetch adhesives be improved by double application or by an extra layer of hydrophobic resin? Journal of Dentistry 36(5) 309-315.
22. Reis A, de Carvalho Cardoso P, Vieira LC, Baratieri LN, Grande RH, & Loguercio AD (2008) Effect of prolonged application times on the durability of resin-dentin bonds Dental Materials 24(5) 639-644.
23. Frankenberger R, Perdigão J, Rosa BT, & Lopes M (2001) "No-bottle" vs "multi-bottle" dentin adhesives-a microtensile bond strength and morphological study Dental Materials 17(5) 373-380.
24. Koibuchi H, Yasuda N, & Nakabayashi N (2001) Bonding to dentin with a self-etching primer: the effect of smear layers Dental Materials 17(2) 122-126.
25. Nikolaenko SA, Lohbauer U, Roggendorf M, Petschelt A, Dasch W, & Frankenberger R (2004) The influence of c-factor and layering technique on microtensile bond strength to dentin Dental Materials 20(6) 579-585.
26. Shono Y, Ogawa T, Terashita M, Carvalho RM, Pashley EL, & Pashley DH (1999) Regional measurement of resindentin bonding as an array Journal of Dental Research 78(2) 699-705.
27. Taschner M, Nato F, Mazzoni A, Frankenberger R, Falconi M, Petschelt A, & Breschi L (2012) Influence of preliminary etching on the stability of bonds created by one-step self-etch bonding systems European Journal of Oral Science 120(3) 239-248.
28. Camps J, & Pashley DH (2000) Buffering action of human dentin in vitro Journal of Adhesive Dentistry 2(1) 39-50.
29. Yoshihara K, Yoshida Y, Hayakawa S, Nagaoka N, Irie M, Ogawa T, Van Landuyt KL, Osaka A, Suzuki K, Minagi S, & Van Meerbeek B (2011) Nano-Layering of phosphoric-acid ester monomer on enamel and dentin Acta Biomaterialia 7(8) 3187-3195.
30. Erhardt MC, Pisani-Proença J, Osorio E, Aguilera FS, Toledano M, & Osorio R (2011) Influence of laboratory degradation methods and bonding application parameters on microtbs of self-etch adhesives to dentin American Journal of Dentistry 24(2) 103-108.
31. Inoue S, Koshiro K, Yoshida Y, De Munck J, Nagakane K, Suzuki K, Sano H, & Van Meerbeek B (2005) Hydrolytic stability of self-etch adhesives bonded to dentin Journal of Dental Research 84(12) 1160-1164.
32. Mitra SB, Lee CY, Bui HT, Tantbirojn D, & Rusin RP (2009) Long-term adhesion and mechanism of bonding of a paste-liquid resin-modified glass-ionomer Dental Materials 25(4) 459-466.
33. Van Landuyt KL, De Munck J, Cardoso MV, Peumans M, & Van Meerbeek B (2010) Filler debonding & subhybridlayer failures in self-etch adhesives Journal of Dental Research 89(10) 1045-1050.
34. Navarra CO, Cadenaro M, Codan B, Mazzoni A, Sergo V, De Stefano Dorigo E, & Breschi L (2009) Degree of conversion and interfacial nanoleakage expression of three one-step self-etch adhesives European Journal of Oral Science 117(4) 463-469.
35. Da Silva AL, Lima DA, De Souza GM, Dos Santos CT, & Paulillo LA (2006) Influence of additional adhesive application on the microtensile bond strength of adhesive systems Operative Dentistry 31(5) 562-568.
36. Nakaoki Y, Sasakawa W, Horiuchi S, Nagano F, Ikeda T, Tanaka T, Inoue S, Uno S, Sano H, & Sidhu SK (2005) Effect of double-application of all-in-one adhesives on dentin bonding Journal of Dentistry 33(9) 765-772.
37. Kim JS, Choi YH, Cho BH, Son HH, Lee IB, Um CM, & Kim CK (2006) Effect of light-cure time of adhesive resin on the thickness of the oxygen-inhibited layer and the microtensile bond strength to dentin Journal of Biomedical Materials Research Part B: Applied Biomaterials 78(1) 115-123.
38. Hosoya Y, Shinkawa H, Suefiji C, Nozaka K, & Garcia-Godoy F (2004) Effects of diamond bur particle size on dentin bond strength American Journal of Dentistry 17(5) 359-364.
39. Sattabanasuk V, Vachiramon V, Qian F, & Armstrong SR (2007) Resin-dentin bond strength as related to different surface preparation methods Journal of Dentistry 35(6) 467-475.
40. Van Meerbeek B, De Munck J, Mattar D, Van Landuyt K, & Lambrechts P (2003) Microtensile bond strengths of an etch&rinse and self-etch adhesive to enamel and dentin as a function of surface treatment Operative Dentistry 28(5) 647-660.
41. Suyama Y, Lührs AK, De Munck J, Mine A, Poitevin A, Yamada T, Van Meerbeek B, & Cardoso MV (2013) Potential smear layer interference with bonding of selfetching adhesives to dentin Journal of Adhesive Dentistry April 8. doi: 10.3290/j.jad.a29554 Epub ahead of print
42. Oliveira SSA, Pugach MK, Hilton JF, Watanabe LG, Marshall SJ, & Marshall GW (2003) The influence of the dentin smear layer on adhesion: a self-etching primer vs. A total-etch system Dental Materials 19(8) 758-767.
43. Tani C, & Finger WJ (2002) Effect of smear layer thickness on bond strength mediated by three all-in-one self-etching priming adhesives Journal of Adhesive Dentistry 4(4) 283-289.
44. Van Landuyt KL, Mine A, De Munck J, Jaecques S, Peumans M, Lambrechts P, & Van Meerbeek B (2009) Are one-step adhesives easier to use and better performing? Multifactorial assessment of contemporary one-step self-etching adhesives Journal of Adhesive Dentistry 11(3) 175-190.
45. Pioch T, Kobaslija S, Huseinbegovic A, Muller K, & Dorfer CE (2001) The effect of NaOCl dentin treatment on nanoleakage formation Journal of Biomedical Materials Research 56(4) 578-583.
46. Sano H, Shono T, Takatsu T, & Hosada H (1994) Microporous dentin zone beneath resin-impregnated layer Operative Dentistry 19(2) 59-64.
47. Yamauti M, Hashimoto M, Sano H, Ohno H, Carvalho RM, Kaga M, Tagami J, Oguchi H, & Kubota M (2003) Degradation Of resin-dentin bonds using NaOCl storage Dental Materials 19(5) 399-405.
48. Hashimoto M, Tay FR, Ohno H, Sano H, Kaga M, Yiu C, Kumagai H, Kudou Y, Kubota M, & Oguchi H (2003) SEM and TEM analysis of water degradation of human dentin collagen Journal of Biomedical Materials Research 66(1) 287-298.
49. Toledano M, Osorio R, Osorio E, Aguilera FS, Yamauti M, Pashley DH, & Tay F (2007) Durability of resin-dentin bonds: effect of direct and indirect exposure and storage media Dental Materials 23(7) 885-892.
50. Saboia VP, Silva FC, Nato F, Mazzoni A, Cadenaro M, Mazzotti G, Giannini M, & Breschi L (2009) Analysis of differential artificial ageing of the adhesive interface produced by a two-step etch-and-rinse adhesive European Journal of Oral Science 117(5) 618-624.
51. Toledano M, Cabello I, Yamauti M, Giannini M, Aguilera FS, Osorio E, & Osorio R (2012) Resistance to degradation of resin-dentin bonds produced by one-step self-etch adhesives Microscopy and Microanalysis 18(6) 1480-1493.