Resistance to degradation of resin-dentin bonds produced by one-step self-etch adhesives

Microscopy and Microanalysis

Volumn 18, Issue 6, 2012, Pages 1480-1493

  Toledano, Manuel ^a   Cabello, Inmaculada ^a   Yamauti, Monica ^a   Giannini, Marcelo ^b   Aguilera, Fátima S ^a   Osorio, Estrella ^a   Osorio, Raquel ^a  

^a UNIVERSITY OF GRANADA   (Spain)

^b UNIVERSITY OF CAMPINAS   (Brazil)

Author keywords

adhesives; bonding efficacy; dentin; microleakage; self etch; surface properties

Indexed keywords

COLLAGEN; RESIN; TOOTH CEMENT; WATER;

ANALYSIS OF VARIANCE; ANATOMY; ATOMIC FORCE MICROSCOPY; CHEMICAL PHENOMENA; CHEMISTRY; CONFERENCE PAPER; DENTAL ACID ETCHING; DENTAL BONDING; DENTAL PROCEDURE; HARDNESS; HUMAN; METHODOLOGY; MOLAR TOOTH; NANOTECHNOLOGY; SCANNING ELECTRON MICROSCOPY; SURFACE PROPERTY; TENSILE STRENGTH; TIME;

ACID ETCHING, DENTAL; ANALYSIS OF VARIANCE; ANATOMY, CROSS-SECTIONAL; COLLAGEN; DENTAL BONDING; DENTAL CEMENTS; DENTAL STRESS ANALYSIS; HARDNESS; HARDNESS TESTS; HUMANS; HYDROPHOBIC AND HYDROPHILIC INTERACTIONS; MICROSCOPY, ATOMIC FORCE; MICROSCOPY, ELECTRON, SCANNING; MOLAR, THIRD; NANOTECHNOLOGY; RESINS, SYNTHETIC; SURFACE PROPERTIES; TENSILE STRENGTH; TIME FACTORS; WATER;

EID: 84871479313     PISSN: 14319276     EISSN: 14358115     Source Type: Journal    
DOI: 10.1017/S1431927612013529     Document Type: Conference Paper

References (52)

1. CARVALHO, R.M., CHERSONI, S., FRANKENBERGER, R., PASHLEY, D.H., PRATI, C. & TAY, F. R. (2005). A challenge to the conventional wisdom that simultaneous etching and resin infiltration always occurs in self-etch adhesives. Biomaterials 26, 1035-1042.
2. DE MUNCK, J., VAN MEERBEEK, B., SATOSHI, I., VARGAS, M., YOSHIDA, Y., ARMSTRONG, S., LAMBRECHTS, P. & VANHERLE, G. (2003). Microtensile bond strengths of one-and two-step self-etch adhesives to bur cut enamel and dentin. Am J Dent 16, 414-420.
3. EDDLESTON, C.L., HINDLE, A.R., AGEE, K.A., CARVALHO, R.M., TAY, F.R., RUEGGEBERG, F.A. & PASHLEY, D.H. (2003). Dimensional changes in acid-demineralized dentin matrices following the use of HEMA-water versus HEMA-alcohol primers. J Bio-med Mater Res A 67, 900-907.
4. EL ZOHAIRY, A.A., SABER, M.H., ABDALLA, A.I. & FEILZER, A.J. (2010). Efficacy of microtensile versus microshear bond testing for evaluation of bond strength of dental adhesive systems to enamel. Dent Mater 26, 848-854.
5. ERDILEK, D., DÖRTER, C., KORAY, F., KUNZELMANN, K.H., EFES, B.G. & GOMEC, Y. (2009). Effect of thermo-mechanical load cycling on microleakage in class II ormocer restorations. Eur J Dent 3, 200-205.
6. FERRACANE, J.L. & GREENER, E.H. (1984). Fourier transform infrared analysis of degree of polymerization in unfilled resins\Methods comparison. J Dent Res 63, 1093-1095.
7. GLAVCHEV, I., NIKOLOV, R.N. & VALCHEV, P. (2003). Determination of evaporation rates of mixed solvents with the formation of thin films for membranes. Polym Test 22, 529-532.
8. GORDAN, V.V., VARGAS, M.A., COBB, D.S. & DENEHY, G.E. (1997). Evaluation of adhesive systems using acidic primers. Am J Dent 10, 219-223.
9. HASHIMOTO, M., OHNO, H., KAGA, M., ENDO, K., SANO, H. & OGUCHI, H. (2000). In vivo degradation of resin-dentin bonds in humans over 1 to 3 years. J Dent Res 79, 1385-1391.
10. HASHIMOTO, M., OHNO, H., KAGA, M., SANO, H., ENDO, K. & OGUCHI, H. (2002). The extent to which resin can infiltrate dentin by acetone-based adhesives. J Dent Res 81, 74-78.
11. HASS, V., FOLKUENIG, M.S., REIS, A. & LOGUERCIO, A.D. (2011). Influence of adhesive properties on resin-dentin bond strength of one-step self-etching adhesives. J Adhes Dent 13, 417-424.
12. HIRAISHI, N., BRESCHI, L., PRATI, C., FERRARI, M., TAGAMI, J. & KING, N.M. (2007). Technique sensitivity associated with air-drying of HEMA-free, single-bottle, one-step self-etch adhe-sives. Dent Mater 23, 498-505.
13. HOSAKA, K., NAKAJIMA, M., TAKAHASHI, M., ITOH, S., IKEDA, M., TAGAMI, J. & PASHLEY, D.H. (2010). Relationship between mechanical properties of one-step self-etch adhesives and water sorption. Dent Mater 26, 360-367.
14. HOSOYA, Y. (2006). Hardness and elasticity of bonded carious and sound primary tooth dentin. J Dent 34, 164-171.
15. ITO, S., HASHIMOTO, M., WADGAONKAR, B., SVIZERO, N., CAR-VALHO, R.M., YIU, C., RUEGGEBERG, F.A., FOULGER, S., SAITO, T., NISHITANI, Y., YOSHIYAMA, M., TAY, F.R. & PASH-LEY, D.H. (2005). Effects of resin hydrophilicity on water sorption and changes in modulus of elasticity. Biomaterials 26, 6449-6459.
16. JACOBSEN, T. & SÖDERHOLM, K.J. (1995). Some effects of water on dentin bonding. Dent Mater 11, 132-136.
17. LI, H., BURROW, M.F. & TYAS, M.J. (2002). The effect of load cycling on the nanoleakage of dentin bonding systems. Dent Mater 18, 111-119.
18. MARGVELASHVILI, M., GORACCI, C., BELOICA, M., PAPACCHINI, F. & FERRARI, M. (2010). In vitro evaluation of bonding effectiveness to dentin of all-in-one adhesives. J Dent 38, 106-112.
19. MIYAZAKI, M., TSUBOTA, K., ONOSE, H. & HINOURA, K. (2002). Influence of adhesive application duration on dentin bond strength of single-application bonding systems. Oper Dent 27, 278-283.
20. MONTICELLI, F., OSORIO, R., PISANI-PROENÇA, J. & TOLEDANO, M. (2007). Resistance to degradation of resin-dentin bonds using a one-step HEMA-free adhesive. J Dent 35, 181-186.
21. MOSZNER, N., SALZ, U. & ZIMMERMANN, J. (2005). Chemical aspects of self-etching enamel-dentin adhesives: A systematic review. Dent Mater 21, 895-910.
22. NUNES, T.G., CEBALLOS, L., OSORIO, R. & TOLEDANO, M. (2005). Spatially resolved photopolymerization kinetics and oxygen inhibition in dental adhesives. Biomaterials 26, 1809-1817.
23. OSORIO, E., TOLEDANO, M., YAMAUTI, M. & OSORIO, R. (2012). Differential nanofiller cluster formations in dental adhesive systems. Microsc Res Tech 75, 749-757.
24. OSORIO, R., TOLEDANO, M., OSORIO, E., AGUILERA, F.S. & TAY, F.R. (2005). Effect of load cycling and in vitro degradation on resin-dentin bonds using a self-etching primer. J Biomed Mater Res A 72, 399-408.
25. PASHLEY, D.H., CARVALHO, R.M., SANO, H., NAKAJIMA, M., YOSHIYAMA, M., SHONO, Y., FERNANDES, C.A. & TA Y, F. (1999). The microtensile bond test: A review. J Adhes Dent 1, 299-309.
26. PASHLEY, D.H., CARVALHO, R.M., TAY, F.R., AGEE, K.A. & LEE, K.W. (2002). Solvation of dried dentin matrix by water and other polar solvents. Am J Dent 15, 97-102.
27. SANO, H., YOSHIKAWA, T., PEREIRA, P.N., KANEMURA, N., MORIGAMI, M., TAGAMI, J. & PASHLEY, D.H. (1999). Long-term durability of dentin bonds made with a self-etching primer, in vivo. J Dent Res 78, 906-911.
28. SANTOS, P., JúLIO, E. & SILVA, V. (2007). Correlation between concrete-to-concrete bond strength and the roughness of the substrate surface. Constr Build Mater 21, 1688-1695.
29. SAURO, S., TOLEDANO, M., AGUILERA, F.S., MANNOCCI, F., PASHLEY, D.H., TAY, F.R., WATSON, T.F. & OSORIO, R. (2011). Resin-dentin bonds to EDTA-treated vs. acid-etched dentin using ethanol wet-bonding. Part II: Effects of mechanical cycling load on microtensile bond strengths. Dent Mater 27, 563-572.
30. SCHULZE, K.A., OLIVEIRA, S.A., WILSON, R.S., GANSKY, S.A., MARSHALL, G.W. & MARSHALL, S.J. (2005). Effect of hydration variability on hybrid layer properties of a self-etching versus an acid-etching system. Biomaterials 26, 1011-1018.
31. TAKAHASHI, A., SATO, Y., UNO, S., PEREIRA, P.N. & SANO, H. (2002). Effects of mechanical properties of adhesive resins on bond strength to dentin. Dent Mater 18, 263-268.
32. TAKAHASHI, R., NIKAIDO, T., ARIYOSHI, M., FOXTON, R.M. & TAGAMI, J. (2010). Microtensile bond strengths of a dual-cure resin cement to dentin resin-coated with an all-in-one adhesive system using two curing modes. Dent Mater 29, 268-277.
33. TAY, F.R., GWINNETT, J.A. & WEI, S.H. (1996). Micromorphological spectrum from overdrying to overwetting acid-conditioned dentin in water-free acetone-based, single-bottle primer/adhesives. Dent Mater 12, 236-244.
34. TAY, F.R. & PASHLEY, D.H. (2001). Aggressiveness of contemporary self-etching systems. I: Depth of penetration beyond dentin smear layers. Dent Mater 17, 296-308.
35. TAY, F.R. & PASHLEY, D.H. (2003). Have dentin adhesives become too hydrophilic? J Can Dent Assoc 69, 726-731.
36. TOLEDANO, M., CABELLO, I., YAMAUTI, M. & OSORIO, R. (2012a). Differential resin-dentin bonds created after caries removal with polymer burs. Microsc Microanal 18, 1-12.
37. TOLEDANO, M., OSORIO, R., ALBALADEJO, A., AGUILERA, F.S. & OSORIO, E. (2006). Differential effect of in vitro degradation on resin-dentin bonds produced by self-etch versus total-etch ad-hesives. J Biomed Mater Res A 77, 128-135.
38. TOLEDANO, M., OSORIO, R., OSORIO, E., AGUILERA, F.S., YAMAUTI, M., PASHLEY, D.H. & TA Y, F. (2007). Durability of resin-dentin bonds: Effects of direct/indirect exposure and storage media. Dent Mater 23, 885-892.
39. TOLEDANO, M., PERDIGÃO, J., OSORIO, R. & OSORIO, E. (2000). Effect of dentin deproteinization on microleakage of class V composite restorations. Oper Dent 25, 497-504.
40. TOLEDANO, M., YAMAUTI, M., OSORIO, E., MONTICELLI, F. & OSO-RIO, R. (2012b). Characterization of micro-and nanophase separation of dentin bonding agents by stereoscopy and atomic force microscopy. Microsc Microanal 3, 1-10.
41. UEHARA, K. & SAKURAI, M. (2002). Bonding strength of adhesives and surface roughness of joined parts. J Mater Process Technol 127, 178-181.
42. UEKUSA, S., YAMAGUCHI, K., MIYAZAKI, M., TSUBOTA, K., KURO-KAWA, H. & HOSOYA, Y. (2006). Bonding efficacy of single-step self-etch systems to sound primary and permanent tooth den-tin. Oper Dent 31, 569-576.
43. VAN LANDUYT, K.L., DE MUNCK, J., SNAUWAERT, J., COUTINHO, E., POITEVIN, A., YOSHIDA, Y., INOUE, S., PEUMANS, M., SUZUKI, K., LAMBRECHTS, P. & VAN MEERBEEK, B. (2005). Monomer-solvent phase separation in one-step self-etch adhesives. J Dent Res 84, 183-188.
44. VAN LANDUYT, K.L., SNAUWAERT, J., DE MUNCK, J., PEUMANS, M., YOSHIDA, Y., POITEVIN, A., COUTINHO, E., SUZUKI, K., LAM-BRECHTS, P. & VAN MEERBEEK, B. (2007). Systematic review of the chemical composition of contemporary dental adhesives. Biomaterials 28, 3757-3785.
45. VAN MEERBEEK, B., DE MUNCK, J., YOSHIDA, Y., INOUE, S., VARGAS, M., VIJAY, P., VAN LANDUYT, K., LAMBRECHTS, P. & VANHERLE, G. (2003). Buonocore memorial lecture. Adhesion to enamel and dentin: Current status and future challenges. Oper Dent 28, 215-235.
46. VAN MEERBEEK, B., VAN LANDUYT, K., DE MUNCK, J., HASHIMOTO, M., PEUMANS, M., LAMBRECHTS, P., YOSHIDA, Y., INOUE, S. & SUZUKI, K. (2005). Technique-sensitivity of contemporary ad-hesives. Dent Mater 24, 1-13.
47. VAN STRIJP, A.J., JANSEN, D.C., DEGROOT, J., TEN CATE, J.M. & EVERTS, V. (2003). Host-derived proteinases and degradation of dentine collagen in situ. Caries Res 37, 58-65.
48. YAMAUTI, M., HASHIMOTO, M., SANO, H., OHNO, H., CARVALHO, R.M., KAGA, M., TAGAMI, J., OGUCHI, H. & KUBOTA, M. (2003). Degradation of resin-dentin bonds using NaOCl storage. Dent Mater 19, 399-405.
49. YIU, C.K., PASHLEY, E.L., HIRAISHI, N., KING, N.M., GORACCI, C., FERRARI, M., CARVALHO, R.M., PASHLEY, D.H. & TAY, F.R. (2005). Solvent and water retention in dental adhesive blends after evaporation. Biomaterials 26, 6863-6872.
50. YOSHIDA, E., HASHIMOTO, M., HORI, M., KAGA, M., SANO, H. & OGUCHI, H. (2004a). Deproteinizing effects on resin-tooth bond structures. J Biomed Mater Res B Appl Biomater 68, 29-35.
51. YOSHIDA, Y., NAGAKANE, K., FUKUDA, R., NAKAYAMA, Y., OKAZAKI, M., SHINTANI, H., INOUE, S., TAGAWA, Y., SUZUKI, K., DE MUNCK, J. & VAN MEERBEEK, B. (2004b). Comparative study on adhesive performance of functional monomers. J Dent Res 83, 454-458.
52. ZHOU, X.D., ZHANG, S.C., HUEBNER, W. & OWNBY, P.D. (2001). Effect of the solvent on the particle morphology of spray PMMA. J Mater Sci 36, 3759-3768.