The RF in RFID: UHF RFID in Practice: Second Edition

The RF in RFID: UHF RFID in Practice: Second Edition

Volumn , Issue , 2012, Pages 1-529

  Dobkin, Daniel M ^a  

^a NONE

Author keywords

[No Author keywords available]

Indexed keywords

EID: 84902021336     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1016/C2011-0-06799-6     Document Type: Book

References (94)

1. S. Wilson, Prentice-Hall 1996. For the serious student; the fundamentals of signal modulation and detection, developed with considerably more rigor than we have employed here.
2. Klaus Finkenzeller, Wiley 2004. This is a wide-ranging introduction to RFID technology and applications, focusing on inductively-coupled systems but with a discussion of UHF RFID. The technical material is challenging for someone unfamiliar with the field (though perhaps it will be more accessible after you finish The RF in RFID). An updated third edition of this book was released in 2010.
3. Manish Bhuptani and Shahram Moradpour, Sun Microsystems Press 2005. Marketing- and ROI-focused; a useful complement to the current volume and Finkenzeller's book.
4. Sandib Lahiri, IBM Press, 2006. A nice guide for folks who need to implement supply-chain RFID systems, with guidelines, rules of thumb, and checklists for the various aspects of the project.
5. "Shrouds of Time: The History of RFID", Jeremy Landt and Barbara Kaplin, AIM (Association for Automatic Identification and Data Capture Technologies)
6. "Communication by Means of Reflected Power", Harry Stockman, Proc I.R.E., October, 1948, p. 1196
7. "Radio Transmission Systems with Modulatable Passive Responder", Harris, US Patent 2,927,321, filed 1952, granted 1960
8. "Folded Dipole Having a Direct Current Output", Crump, US Patent 2,943,189, filed 1956, granted 1960.
9. "The toll highway faces automation", William Arnold, Electronics, November 8, 1973, p. 74
10. "Electronic Road Pricing in Singapore: A Technical Overview", B. Benight and P. Chong Sun, IES-CTR Symposium on Advanced Technologies in Transportation, Hotel Equatorial, Singapore, 19 April 1996
11. "A History of the EPC", S. Sarma, chapter 3 of RFID: Applications, Security, and Privacy, S. Garfinkel &. B. Rosenberg, Addison-Wesley 2005
12. Thomas Lee, Cambridge, 1998: An encyclopedic introduction to the design of radio components, though the emphasis is much broader than purely CMOS implementation (which was probably added to the title to increase sales). Includes treatments of synthesizer operation, oscillator phase noise, and feedback design.
13. "Delta-Sigma Data Conversion in Wireless Transceivers", Ian Galton, IEEE Transactions on Microwave Theory and Techniques, vol. 50, #1, p. 302 (2002)
14. "Analog-to-digital converter survey and analysis", R. Walden, IEEE Journal on Selected Areas in Communications, vol. 17 #4, p. 539 (1999)
15. Steve C. Cripps, Artech House, 1999: Cripps is bright, opinionated, and brings extensive practical experience to bear on abstruse topics in amplifier design.
16. George Vendelin, Wiley Interscience, 1982: purely microwave-oriented, antedating modern CMOS and SiGe devices, but a useful reference and introduction to matching techniques, low-noise and broadband design.
17. "A Fully Integrated Integrated 1.9-GHz CMOS Low-Noise Amplifier", C. Kim et. al., IEEE Mcrowave and Guided Wave Letters, Vol. 8, #8, p. 293 (1998)
18. "On the Use of Multitone Techniques for Assessing RF Component's Intermodulation Distortion", J. Pedro and N. de Carvalho, IEEE Transactions on Microwave Theory and Techniques, vol . 47, p. 2393 (1999)
19. "Weigh Amplifier Dynamic-Range Requirements", D. Dobkin (that's me!), Walter Strifler and Gleb Klimovitch, Microwaves and RF, December 2001, p. 59
20. A great deal of useful introductory material on mixers was published over the course of about 15 years by Watkins-Johnson Company as TechNotes. These have been rescued from oblivion (in part by the current author) and are available on the web site of WJ Communications' acquirer, TriQuint Semiconductor, at http://www.triquint.com/products/tech-library/wj-tech-publications.cfm
21. "Short-range Radio-telemetry for Electronic Identification using Modulated RF Backscatter", A. Koelle, S. Depp and R. Freyman, Proc IEEE August 1975 p. 1260: nearly all the elements of a modern UHF RFID system three decades in advance. Plus ca change, plus c'est la meme chose.
22. "Design considerations for embedded software-defined RFID readers", Matthew Reynolds and Christopher Weigand, RF Design August 2005 p. 14
23. "Data Recovery", Nick Sawyer, Xilinx Application Note XAPP224 (v2.5), July 11, 2005
24. "Design criteria for the RF section of UHF and microwave passive RFID transponders", G. De Vita and G. Iannaccone, IEEE Transactions on Microwave Theory and Techniques, Volume 53, Issue 9, Date: Sept. 2005, Pages: 2978-2990
25. "Fully Integrated Passive UHF RFID Transponder IC with 16.7 mW Minimum RF Input Power", U. Karthaus and M. Fischer, IEEE J. Solid-State Circuits, 38 #10 p. 1602 (2003)
26. "UHF Passive-Tag IC Design", Roger Stewart, IEEE MTT-S, June 2006, Session TSC-110.
27. "Design of Ultra-Low-Cost UHF RFID Tags for Supply Chain Applications", Rob Glidden, Cameron Bockorick, Scott Cooper, Chris Diorio, David Dressler, Vadim Gutnik, Casey Hagen, Dennis Hara, Terry Hass, Todd Humes, John Hyde, Ron Oliver, Omer Onen, Alberto Pesavento, Kurt Sundstrom, and Mike Thomas, IEEE Communications Magazine, August, 2004, p. 140
28. "Single-Ended Ultra-Low-Power Multistage Rectifiers for Passive RFID Tags at UHF and Microwave Frequencies", K. Seeman, G. Hofer, F. Cilek, and R. Weigel, IEEE Radio and Wireless Conference (RAWCON) 2006 paper TH2A-1
29. "Wafer bumping technologies. A comparative analysis of solder deposition processes and assembly considerations", Patterson, D.S.; Elenius, P.; Leal, J.A., Advances in Electronic Packaging 1997. Proceedings of the Pacific Rim/ASME International Intersociety Electronic and Photonic Packaging Conference. INTERpack ASME, 1997. p.337-51, vol.1, Conference: Kohala Coast, HI, USA, 15-19 June 1997
30. "Manufacturing Multichip Modules", p. 391ff, by Rakesh Agarwal and Michael Pecht, in Physical Architecture of VLSI Systems, ed. Robert J. Hannemann, Allan D. Kraus and Michael Pecht; John Wiley & Sons Inc., New York (1994)
31. "Advanced solder flip chip processes", Rinne, G.; Koopman, N.; Magill, P.; Nangalia, S.; Berry, C.; Mis, D.; Rogers, V.; Adema, G.; Berry, M.; Deane, P. SMI. Surface Mount International. Advanced Electronics Manufacturing Technologies. Proceedings of The Technical Program Edina, MN, USA: Surface Mount Technol. Assoc, 1996. p.282-92 vol.1 of 2 vol. 826 pp. Conference: San Jose, CA, USA, 10-12 Sept 1996
32. "Multichip Assembly with Flipped Integrated Circuits", Heinen, Schroen, Edgwards, Wilson, Stierman and Lamson, Proc 39th Electronic Component Conference p. 672 1989
33. "Flip-chip packaging with polymer bumps", Estes, R.H., Semiconductor International (Feb. 1997) vol.20, no.2, p.103
34. "Reflowable anisotropic conductive adhesives for flipchip packaging", Sea, T.Y.; Tan, T.C.; Peh, E.K., Proceedings of the 1997 1st Electronic Packaging Technology Conference, 1997. p.259 Conference: Singapore, 8-10 Oct 1997
35. "A Global SAW ID Tag with Large Data Capacity", C. Hartmann, IEEE Ultrasonics Symposium 2000, p. 65
36. "Anti-Collision Methods for Global SAW RFID Tag Systems", C. Hartmann, P. Hartmann, P. Brown, J. Bellamy, L. Claiborne and W. Bonner, IEEE Ultrasonics Symposium 2004, p. 805
37. "Organic Semiconductor RFID Transponders", P. Baude, D. Ender, T. Kelley, M. Haase, D. Muyres, and S. Theiss [3M], IEDM 2003 paper 8.1.1 (03-191)
38. "Progress Toward Development of All-Printed RFID Tags: Materials, Processes, and Devices", V. Subramanian, J. Frechet, P. Chang, D. Huang, J. Lee, S. Molesa, A. Murphy, D. Redinger, and S. Volkman, Proc IEEE v 93 #7 p. 1330 (2005)
39. "Analysis, design, and implementation of a semi-passive Gen2 Tag", W. Che, Y. Yang, C. Xu, N. Yan, X. Tan, Q. Li, H. Min, and J. Tan, IEEE International Conference on RFID 2009, p. 15
40. "Ultra-low-power wi-fi tag for wireless sensing", S. Folea and M. Ghercioiu, IEEE International Conference on Automation, Quality and Testing, Robotics (AQTR) 2008, p. 247
41. "Interaction in pervasive computing settings using Bluetooth-enabled active tags and passive RFID technology together with mobile phones", F. Siegemund and C. Florkmeier, Proceedings of the first IEEE International Conference on Pervasive Computing and Communications (PerCom 2003).
42. "Sensor measurements for wi-fi location with emphasis on time-of-arrival ranging", S. Golden and S. Bateman, IEEE Transactions on Mobile Computing v. 6 #10, p. 1185 (2007)
43. "Revisiting RFID link budgets for technology scaling: range maximization of RFID tags", R. Chakraborty, S. Roy, and V. Jandhyala, IEEE Transactions on Microwave Theory and Techniques, v. 29 #2, p. 296 (2011)
44. "UHF passive RFID tag antennas," D. Deavours and D. Dobkin, in Microstrip and Printed Antennas, ed. D. Guha and Y. Antar, Wiley 2011.
45. "Analysis and design of wideband passive UHF RFID tags using a circuit model," D. Deavours, IEEE International Conference on RFID 2009, p. 283
46. "Performance degradation of RFID system due to the distortion in RFID tag antenna," J. Siden, P. Jonsson, T. Olsson, and G. Wang, 11th International Conference on Microwave and Telecommunications Technology (CriMiCo 2001), Sevastopol, Crimea, Ukraine, September 2001, p. 371
47. "On the read zone analysis of radio frequency identification systems with transponders oriented in arbitrary directions," K. Rao, D. Duan, and H. Heinrich, APAC Microwave Conference 1999, p. 758
48. "Power reflection coefficient analysis for complex impedances in RFID tag design," P. Nikitin, K. Rao, S. Lam, V. Pillai, R. Martinez, and H. Heinrich, IEEE Transactions on Microwave Theory and Techniques, Volume 53 #9, p. 2721 (2005)
49. "Antenna design for UHF RFID tags: a review and a practical application," K. Rao, P. Nikitin, and S. Lam, IEEE Transactions on Antennas and Propagation, Volume 53 # 12, p. 3870 (2005)
50. "Impedance matching concepts in RFID transponder design," K. Rao, P. Nikitin, and S. Lam, Fourth IEEE Workshop on Automatic Identification Advanced Technologies, 2005, pp. 39-42
51. "Design of UHF small passive tag antennas," Chihyun Cho, Hosung Choo, and I. Park, IEEE Antennas and Propagation Society International Symposium, 2005 p. 349
52. "RFID tag design, sub fractional performance effects," G. Hassman, Mentor Graphics, November 2010; http://www.mentor.com/electromagnetic-simulation/
53. "An RFID tag capable of free-space and on-metal operation," N. Mohammed, M. Sivakumar, and D. Deavours, IEEE Radio and Wireless Symposium 2009, p. 63
54. "Improving the near-metal performance of UHF RFID tags," D. Deavours, IEEE International Conference on RFID 2010, p. 187
55. "Folded dipole antenna near metal plate", P. Raumonen, L. Sydanheimo, L. Ukkonen, L, M. Keskilammi,. And M. Kivikoski, Antennas and Propagation Society International Symposium, 2003. IEEE, vol 1 p. 848-851
56. "Planar Wire-Type Inverted-F RFID Tag Antenna Mountable on Metallic Objects", L. Ukkonen, D. Engels, L. Sydanheimo, M. Kivikoski, IEEE Antennas & Propagation Symposium, Monterey, CA, USA 2004
57. "Design and Development of a Miniaturized Embedded UHF RFID Tag for Automotive Tire Applications", S. Basat, K. Lim, I. Kim, M. Tentzeris and J. Laskar, Electronic Components and Technology Conference 2005, volume 1 p. 867
58. "Multi-standard UHF and UWB antennas for RFID applications," T. Deleruyelle et al., Proceedings of the Fourth European Conference on Antennas and Propagation 2010, p. 1
59. "Low cost silver ink RFID tag antennas", P. Nikitin, S. Lam, K. Rao, IEEE Antennas and Propagation Society International Symposium, 2005, p. 353
60. "Investigation of RFID tag antennas printed on flexible substrates using two types of conductive pastes," K. Janeczek et al., Third Electronic System Integration Technology Conference, 2010, p. 1
61. "Rapid prototyping RFID antennas using direct-write," J. Hoey et al., IEEE Transactions on Advanced Packaging, volume 32 #4 p. 809, 2009
62. "Reliability of passive RFID of multiple objects using folded microstrip patch-type tag antenna", L. Ukkonen, D. Engels, A. Sydanheimo, and M. Kivikoski, IEEE Antennas and Propagation Society International Symposium, 2005 page 341
63. "UHF RFID and Tag Antenna Scattering: Part 1: Experimental Results", Microwave Journal, May 2006, p. 170, and "Part 2: Theory", Microwave Journal, June 2006, p. 86, both by D. Dobkin and S. Weigand
64. "Cloaking circuit for use in a radio frequency identification and method of cloaking RFID tags to increase interrogation reliability", J. Kruest, US Patent 5,963, 144, granted October, 1999.
65. "Input impedance arrangement for RF transponder", C. Turner, US Patent 6,870,460, granted March, 2005.
66. "Mutual coupling of stacked UHF RFID antennas in NFC applications," X. Chen, L. Feng, and T. Ye, Antennas and Propagation Society International Symposium, 2009, p. 1
67. G. Held, New Riders 1999. This is a nice introductory survey of the very broad field of communications, suitable for folks with minimal acquaintance. Some of the technologies discussed (e.g. ISDN and X.25) are now rather dated.
68. A. Leon-Garcia and I. Widjaja, McGraw-Hill 2000. A rather more technical but very readable survey of communications networking. Focused on network architectures much more than the physical-layer concerns with which we have mostly concerned ourselves in the present volume.
69. "An enhanced dynamic framed slotted ALOHA algorithm for RFID tag identification", Su-Ryun Lee, Sung-Don Joo, Chae-Woo Lee, The Second Annual International Conference on Mobile and Ubiquitous Systems: Networking and Services (MobiQuitous), 2005, p. 166-172
70. "Colorwave: a MAC for RFID Reader Networks", J. Waldrop, D. Engels and S. Sarma (MIT Auto-ID Center); Auto-ID Lab web site.
71. "The Reader Collision Problem", D. Engels and S. Sarma, IEEE SMC 2002
72. "Reading Protocol for Transponders of Electronic Identification System", C. Turner, and J. McMurray, US Patent 7,019,664
73. "Anti-Collision Methods for Global SAW RFID Tag Systems", C. Hartmann, P. Hartmann, P. Brown, J. Bellamy, L. Claiborne and W. Bonner, IEEE Ultrasonics Symposium 2004 p. 805
74. "A new medium access protocol for RFID networks with foresight," F. Baloch, D. Hoang, E. Sawan, and R. Pendse, Wireless Telecommunications Symposium (WTS) 2011
75. "A Lightweight Mutual Authentication Protocol for RFID Networks", Luo Zongwei, T. Chan, T, J. Li, IEEE International Conference on e-Business Engineering, 2005, p. 620
76. "Grouping Proof for RFID Tags", J. Saito and K. Sakurai, AINA 2005
77. "A feasible security mechanism for low cost RFID tags", Gwo-Ching Chang, International Conference on Mobile Business, 2005, p. 675
78. "A scalable and provably secure hash-based RFID protocol", G. Avoine, P. Oechslin, Third IEEE International Conference on Pervasive Computing and Communications, Workshops, 2005, p. 110
79. "A Study on Establishment of Secure RFID Network Using DNS Security Extension", YoungHwan Ham, NaeSoo Kim, CheolSig Pyo, JinWook Chung, 2005 Asia-Pacific Conference on Communications, p. 525
80. "RFID privacy: an overview of problems and proposed solutions", S. Garfinkel, A. Juels, and R. Pappu, IEEE Security & Privacy Magazine, v3 #3 p. 34 (2005)
81. "Social Acceptance of RFID as a Biometric Security Method", C. Perakslis and R. WolkProceedings of the International Symposium on Technology and Society, ISTAS 2005 p. 79
82. "A comparative study of wireless protocols: Bluetooth, UWB, Zigbee, and Wi-Fi," J. Lee, Y. Su, and C. Shen, 33rd Annual Conference of the IEEE Industrial Electronics Society (IECON), November 5-8, 2007, Taipei, Taiwan
83. "Model-based design exploration of wireless sensor node lifetimes," D. Jung, T. Teixeira, A. Barton Sweeney, and A. Savvides, Proceedings of the Fourth European Conference on Wireless Sensor Networks, EWSN 2007, January 29-31, 2007
84. "Performance evaluation of IEEE 802.15.4 LR-WPAN for industrial applications," F. Chen, N. Wang, R. German, and F. Dressler, Fifth Annual Conference on Wireless on Demand Network Systems and Services, 2008, p. 89
85. "Direction sensing RFID reader for mobile robot navigation," M. Kim and N. Chong, IEEE Transactions on Automation Science and Engineering, vol. 6, p. 44 (2009)
86. "Method for controlling the angular extent of interrogation zones in RFID," T. Hansen and M. Oristaglio, IEEE Antennas and Wireless Propagation Letters, vol. 5, p. 134 (2006)
87. "3D passive tag localization schemes for indoor RFID applications," A. Almaaitah, K. Ali, H. Hassanein, and M. Ibnkahla, IEEE International Conference on Communications (2010)
88. F. Nekoogar and F. Dowla, ISBN 1441997008, Springer, 2011.
89. "Remote monitoring and tracking of UF6 cylinders using long-range passive ultra-wideband (UWB) RFID tags," F. Nekoogar and F. Dowla, UCRL-CONF-231891, Lawrence Livermore National Laboratory, June 2007
90. "A sub-μW embedded CMOS temperature sensor for RFID food monitoring application," M. Law, A. Bermak, and H. Luong, IEEE Journal of Solid-State Circuits, vol. 45, p. 1246 (2010)
91. "Temperature management and the cold supply chain",WP-05-0811, Intelleflex Corporation, www.intelleflex.com.
92. "A process- and knowledge-based model to identify and to evaluate the potential of RFID Applications." N. Vojdani, J. Spitznagel, and S. Resch, World Automation Congress 2006
93. "RFID applications in automotive assembly line equipped with friction drive conveyors." D. Tang, R. Zhu, W. Gu, and K. Zheng, Proceedings of the 15th International Conference on Computer Supported Cooperative Work in Design (2011)
94. "Evolution of RFID applications and its implications: Standardization perspective," B. Lee, Y. Kim, H. Kim, PICMET 2007