Dry rolling/sliding wear of nanostructured bainite

Wear

Volumn 316, Issue 1-2, 2014, Pages 70-78

  Das Bakshi, S ^a   Leiro, A ^b   Prakash, B ^b   Bhadeshia, H K D H ^a  

^a UNIVERSITY OF CAMBRIDGE   (United Kingdom)

^b LULEÅ UNIVERSITY OF TECHNOLOGY   (Sweden)

Author keywords

Carbide free bainite; Dry rolling sliding; Hertzian contact; X ray diffraction

Indexed keywords

BAINITE; BAINITIC TRANSFORMATIONS; CARBIDES; HARDENING; STEEL; X RAY DIFFRACTION;

BAINITIC STEEL; CARBIDE-FREE BAINITES; CONTACT SURFACE; HERTZIAN CONTACTS; ISOTHERMAL TRANSFORMATIONS; MAXIMUM SHEAR STRESS; NANOSTRUCTURED BAINITES; RETAINED AUSTENITE;

WEAR RESISTANCE;

EID: 84900791444     PISSN: 00431648     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.wear.2014.04.020     Document Type: Article

References (39)

1. P.J. Mutton, The influence of microstructure of the wear behavior of rail and wheel materials (M.Sc. thesis), University of Melbourne, 1985.
2. Devanathan R., Clayton P. Rolling-sliding wear of three bainitic steels. Wear 1991, 151:255-267.
3. Garnham J.E., Beynon J.H. Dry rolling-sliding wear of bainitic and pearlitic steels. Wear 1992, 157:81-109.
4. Clayton P., Jin N. Unlubricated sliding and rolling/sliding wear behavior of continuously cooled low/medium carbon bainitic steels. Wear 1996, 200:74-82.
5. Jin N., Clayton P. Effect of microstructure on rolling/sliding wear of low carbon bainitic steels. Wear 1997, 202:202-207.
6. Lee K.M., Polycarpou A.A. Wear of conventional pearlitic and improved bainitic rail steel. Wear 2005, 259:391-399.
7. Chang L.C. The rolling/sliding wear performance of high silicon carbide-free bainitic steels. Wear 2005, 258:730-743.
8. Leiro A., Kankanala A., Vuorinen E., Prakash B. Tribological behaviour of carbide-free bainitic steel under dry rolling/sliding conditions. Wear 2011, 273:2-8.
9. Leiro A., Vuorinen E., Sundin K.G., Prakash B., Sourmail T., Smanio V., Caballero F.G., Gracia-Mateo C., Elvira R. Wear of nano-structured carbide-free bainitic steels under dry rolling-sliding conditions. Wear 2013, 298-299:42-47.
10. H. Masumoto, K. Sugino, H. Hayashida, Development of wear resistant and anti-shelling high strength rails in japan, in: Heavy Haul Railway Conference, Perth, Australia, September 1978, lnstitute of Engineers.
11. W. Heller, R. Schweitzer, Hardness, microstructure and wear behaviour of rail steels, in: The Second International Conference on Heavy Haul Railways, Colorado Springs, USA, 1982, pp. 282-286.
12. H. Ichinose, J. Takehara, M. Ueda, High strength rails produced by two-stage flame heating and slack-quenching, in: The Second International Conference on Heavy Haul Railways, Colorado Springs, 1982, USA, pp. 178-182.
13. Kalousek J., Fegredo D.M., Laufer E.E. The wear resistance and worn metallography of pearlite bainite and tempered martensite rail steel microstructure of high hardness. Proceedings of the 6th International Conference on Wear of Material 1987, 212-231. American Society of Mechanical Engineers, New York, USA. K.C. Ludema (Ed.).
14. J. Kalousek, D.M. Fegredo, E.E. Laufer, The wear resistance and worn metallography of pearlite, bainite and tempered martensite rail steel microstructure of high hardness, in: K.C. Ludema (Ed.), American Society of Mechanical Engineers, New York, 1985, pp. 212-231.
15. Bhadeshia H.K.D.H. Bainite in Steels 2001, Institute of Materials, London, UK. 2nd ed.
16. Caballero F.G., Bhadeshia H.K.D.H., Mawella K.J.A., Jones D.G., Brown P. Very strong low-temperature bainite. Mater. Sci. Technol. 2002, 18:279-284.
17. Caballero F.G., Bhadeshia H.K.D.H. Very strong bainite. Curr. Opin. Solid State Mater. Sci. 2004, 8:251-257.
18. Bhadeshia H.K.D.H. The first bulk nanostructured metal. Sci. Technol. Adv. Mater. 2013, 14:014202.
19. Wang T.S., Yang J., Shang C.J., Li X.Y., Lv B., Zhang M., Zhang F.C. Sliding frction surface microstructure and wear resistance of 9SiCr steel with low-temperature austempering treatment. Surf. Coat. Technol. 2008, 202:4036-4040.
20. Zhang P., Zhang F.C., Yan Z.G., Wang T.S., Qian L.H. Wear property of low-temperature bainite in the surface layer of a carburized low carbon steel. Wear 2011, 271:697-704.
21. Yang J., Wang T.S., Zhang B., Zhang F.C. Sliding wear resistance and worn surface microstructure of nanostructured bainitic steel. Wear 2012, 282-283:81-84.
22. Das Bakshi S., Shipway P.H., Bhadeshia H.K.D.H. Three-body abrasive wear of fine pearlite, nanostructured bainite and martensite. Wear 2013, 308:46-53.
23. Sourmail T., Caballero F.G., Garcia-Mateo C., Smanio V., Ziegler C., Kuntz M., Elvira R., Leiro A., Vuorinen E., Teeri T. Evaluation of potential of high Si high C steel nanostructured bainite for wear and fatigue applications. Mater. Sci. Technol. 2013, 29:1166-1173.
24. Katsuki F., Yonemura M. Subsurface characteristics of an abraded Fe-0.4 wt%C pearlitic steel. a nanoindentation study. Wear 2007, 263:1575-1578.
25. Prasad B.K., Prasad S.V. Abrasion-induced microstructural changes during low stress abrasion of a plain carbon (0.5% C) steel. Wear 1991, 151:1-12.
26. Oliver W.C., Pharr G.M. Measurement of hardness and elastic modulus by instrumented indentation: advances in understanding and refinements to methodology. J. Mater. Res. 2004, 19:3-20.
27. Chang L.C., Bhadeshia H.K.D.H. Austenite films in bainitic microstructures. Mater. Sci. Technol. 1995, 874-881.
28. Johnson K.L. Contact Mechanics 1985, Cambridge University Press, Cambridge, UK.
29. WenTao L., Zhang Y., ZhiJing F., JingShan Z. Effects of stick-slip on stress intensity factors for subsurface short cracks in rolling contact. Sci. China Technol. Sci. 2013, 56:2413-2421.
30. Clayton P., Devanathan R. Rolling/sliding wear behavior of a chromium-molybdenum rail steel in pearlitic and bainitic conditions. Wear 1992, 156:121-131.
31. Bhadeshia H.K.D.H. Steels for bearings. Prog. Mater. Sci. 2012, 57:268-435.
32. Chatterjee S., Bhadeshia H.K.D.H. TRIP-assisted steels. cracking of high carbon martensite. Mater. Sci. Technol. 2006, 22:645-649.
33. Lutterotti L. Total pattern fitting for the combined size-strain-stress-texture determination in thin film diffraction. Nucl. Instrum. Methods Phys. Res. B 2010, 268:334-340.
34. s temperature in Fe-Ni-Cr-C alloys. Metall. Trans. A 1977, 8A:1471-1484.
35. Chatterjee S., Wang H.S., Yang J.R., Bhadeshia H.K.D.H. Mechanical stabilisation of austenite. Mater. Sci. Technol. 2006, 22:641-644.
36. Brofman P.J., Ansell G.S. On the effect of fine grain size on the martensite-start temperaure in Fe-27Ni-0.025C alloys. Metall. Trans. A 1983, 14A:1929-1931.
37. Yang H.S., Bhadeshia H.K.D.H. Austenite grain size and the martensite-start temperature. Scr. Mater. 2009, 60:493-495.
38. Williamson G.K., Hall W.H. X-ray line broadening from filed aluminium and wolfram. Acta Metall. 1953, 1:22-31.
39. Yang H.-S., Suh D.W., Bhadeshia H.K.D.H. More complete theory for the calculation of the martensite-start temperature in steels. ISIJ Int. 2012, 52:162-164.