Evaluation of potential of high Si high C steel nanostructured bainite for wear and fatigue applications

Materials Science and Technology (United Kingdom)

Volumn 29, Issue 10, 2013, Pages 1166-1173

  Sourmail, T ^a   Caballero, F G ^b   Garcia Mateo, C ^b   Smanio, V ^a   Ziegler, C ^c   Kuntz, M ^d   Elvira, R ^e   Leiro, A ^f   Vuorinen, E ^f   Teeri, T ^g  

^a ASCOMETAL CREAS   (France)

^b DEPARTMENT OF PHYSICAL METALLURGY   (Spain)

^c ALD VACUUM TECHNOLOGIES GMBH   (Germany)

^d ROBERT BOSCH GMBH   (Germany)

^e GERDAU SA   (Brazil)

^f LULEÅ UNIVERSITY OF TECHNOLOGY   (Sweden)

^g Metso Minerals Inc   (Finland)

Author keywords

Fatigue; Low temperature bainite; Nanostructured bainite; Ultrahigh strength; Wear

Indexed keywords

COMPRESSIVE RESIDUAL STRESS; FATIGUE PERFORMANCE; HIGH STRENGTH AND DUCTILITY; LOW TEMPERATURE BAINITES; NANOSTRUCTURED BAINITES; RETAINED AUSTENITE; SPECIFIC WEAR RATES; ULTRAHIGH STRENGTH;

BAINITE; FATIGUE OF MATERIALS; ISOTHERMS; SILICON STEEL; TEMPERATURE; TENSILE STRENGTH; WEAR OF MATERIALS;

BAINITIC TRANSFORMATIONS;

EID: 84882312784     PISSN: 02670836     EISSN: 17432847     Source Type: Journal    
DOI: 10.1179/1743284713Y.0000000242     Document Type: Article

References (39)

1. F. G. Caballero, H. K. D. H. Bhadeshia, K. J. A. Mawella, D. G. Jones and P. Brown: Mater. Sci. Technol., 2002, 18, 279-284.
2. C. Garcia-Mateo, F. G. Caballero and H. K. D. H. Bhadeshia: ISIJ Int., 2003, 43, 1821-1825.
3. H. K. D. H. Bhadeshia: Millenium Steel, 2004, 4, 25-28.
4. M. Soliman and H. Palkowski: ISIJ Int., 2007, 47, 1703.
5. P. Hodgson, I. Timokhina, X. Xiong, Y. Adach and H. Beladi: Solid State Phenom., 2011, 172-174, 123-128.
6. I. B. Timokhina, H. Beladi, X. Xiong, Y. Adachi and P. Hodgson: Acta Mater., 2011, 59, 5511.
7. J. A. da Cruz, Jr, T. F. M. Rodrigues, V. D. C. Viana and D. B. Santos: Mater. Sci. Forum, 2012, 706-709, 173-180.
8. Heat-treated steels, alloy steels and free-cutting steels - Part 17: ball and roller bearing steels', ISO 683-17:1999, ISO, Geneva, Switzerland, 1999.
9. F. G. Caballero, M. K. Miller, S. S. Babu and C. Garcia-Mateo: Acta Mater., 2007, 55, 381-390.
10. C. Garcia-Mateo and F. G. Caballero: ISIJ Int., 2005, 45, 1736-1740.
11. H. I. Aaronson, H. A. Domian and G. M. Pound: Trans. Metall. Soc. AIME, 1966, 236, 753-767.
12. C. Garcia-Mateo, F. G. Caballero, T. Sourmail, J. Cornide, V. Smanio and R. Elvira: 'Composition design of nanocrystalline bainitic steels by diffusionless solid reaction', Mater. Des., 2013, submitted to Materials Design.
13. L. C. Chang and H. K. D. H. Bhadeshia: Mater. Sci. Technol., 1995, 11, 874-881.
14. T. Sourmail, F. G. Caballero, C. Garcia-Mateo, V. Smanio, C. Ziegler, M. Kuntz, R. Elvira, A. Leiro, E. Vuorinen and T. Teeri: RFCS contract RFSR-CT-2008-00022 'NANOBAIN', final report, Research Fund for Coal and Steel, European Commission.
15. T. Linkewitz: 'Berechnung der Wechselfestigkeit von gekerbten und mehrachsig beanspruchten Proben des Stahls 100Cr6 im bainitischen Zustand', 1998, Düsseldorf, VDI Verlag GmbH.
16. C. Garcia-Mateo, F. G. Caballero and H. K. D. H. Bhadeshia: J. Phys. V, 2003, 112V, 285-288.
17. C. Garcia-Mateo, F. G. Caballero and H. K. D. H. Bhadeshia: Mater. Sci. Forum, 2005, 500-501, 495-502.
18. H. K. D. H. Bhadeshia: 'Solid-solid phase transformations in inorganic materials', (ed. J. M. Howe et al.), Vol. 1, 469-484; 2005, Phoenix, AZ, TMS.
19. H. K. D. H. Bhadeshia: Mater. Sci. Forum, 2005, 500-501, 63-74.
20. H. K. D. H. Bhadeshia: Ironmaking Steelmaking, 2005, 32, 405-410.
21. H. K. D. H. Bhadeshia: The nature, mechanism and properties of strong bainite. In: Proceedings of the 1st International Symposium on Steel Science (IS3-2007), The Iron and Steel Institute of Japan. 2007.
22. C. Garcia-Mateo, F.G. Caballero, T. Sourmail,M.Kuntz, J. Cornide, V. Smanio and R. Elvira: Mater. Sci. Eng. A, 2012, A549, 185-192.
23. T. Sourmail and V. Smanio: Acta Mater., 62, 2639-2648.
24. P. Clayton: Wear, 1980, 60, 75-93.
25. P. Clayton and R. Devanathan: Wear, 1992, 156, 121-131.
26. P. Clayton and N. Jin: Wear, 1996, 200, 74-82.
27. P. Clayton and D. N. Hill: Wear, 1987, 117, 319-334.
28. J. Clayton, K. J. Sawley, P. J. Bolton and G. M. Pell: Wear, 1987, 120, 199-220.
29. R. Devanathan and P. Clayton: Wear, 1991, 151, 255-267.
30. J. Kalousek, D. M. Fegredo and E. E. Laufer: Wear, 1985, 105, 199-222.
31. P. H. Shipway, S. J. Wood and A. H. Dent: Wear, 1997, 203-204, 196-205.
32. E. Vuorinen, A. Linström, P. Rubin, E. Navara and M. Oden: Pellets 2006: Proc. 2nd World Conf. on 'Pellets', Jönköping, Sweden, Stockholm: Swedish Bioenergy Association (SVEBIO), June 2006, 151-155.
33. A. Leiro, E. Vuorinen, K.-G. Sundin, B. Prakash, T. Sourmail, V. Smanio, F. G. Caballero, C. Garcia-Mateo and R. Elvira: Wear, 2013, 298-299, 42-47.
34. M. Peet: Mater. Sci. Technol., 2011, 27, 119-123.
35. H.-P. Lieurade, A. Galtier and P. Rabbe: 'Essais de Fatigue - Partie 1', Technique de l'ingénieur, Paris.
36. J. Yang, T. S. Wang, B. Zhang and F. C. Zhang: Scr. Mater., 2012, 66, 363-366.
37. C. Bathias and J.-P. Bailon: 'La Fatigue des Matériaux et des Structures'; 1997, Paris, Hermes.
38. S. Schmidt: 'Untersuchungen zum Ermüdungsverhalten von mittel-und hochfesten Stählen bei sehr hohen Lastspielzahlen unter Berücksichtigung von Schwingungsrisskorrosion infolge moderner Biokraftstoffe', PhD thesis, University Bremen, Bremen, Germany. to be published 2013.
39. ASM International: 'ASM metal handbook', Vol. 1; 1961, Materials Park, OH, ASM International.