Unlubricated sliding and rolling/sliding wear behavior of continuously cooled, low/medium carbon bainitic steels

Wear

Volumn 200, Issue 1-2, 1996, Pages 74-82

  Clayton, P ^a   Tin, N ^a  

^a OREGON HEALTH AND SCIENCE UNIVERSITY   (United States)

Author keywords

Bainitic steels; Low medium carbon; Rolling sliding wear

Indexed keywords

AUSTENITE; BAINITE; CARBON; COMPOSITION EFFECTS; METALLOGRAPHIC MICROSTRUCTURE; RAILS; WEAR OF MATERIALS;

BAINITIC FERRITE LATHS; LOW CARBON BAINITIC STEELS; ROLLING SLIDING WEAR;

CARBON STEEL;

CONTACT-ROLLING/SLIDING; STEELS; WEAR;

EID: 0030435041     PISSN: 00431648     EISSN: None     Source Type: Journal    
DOI: 10.1016/S0043-1648(96)07249-3     Document Type: Article

References (50)

1. D. Brooke, The advent of the steel rail, 1857-1914, J. Transport History, 7 (1986) 18-31.
2. C.P. Sandberg, On rail-joints and steel rails, Proc. Inst. Civil Engrs., 84 (1885-1886) 365-398.
3. G.B. Waterhouse, Chromium steel rails, Met. Prog. (April 1934) 32-35.
4. T.G. Collinson, W.H. Hodgson and V.J. McNeely, Initial development of fracture tough rail steels, Rail Steel Symp., ISI, London, 1972.
5. F.B. Pickering and B. Garbarz, Strengthening of pearlite formed from thermomechanically processed austenite in vanadium steels and implications for toughness, Mater. Sci. Technol., 5 (1989) 227-237.
6. E.G. Jones, Developments in railway crossings, 3rd Int. Heavy Haul Railway Conference, Vancouver, BC, 1986, IB-15.
7. A.L. DeSy, J. Dilewijns and G. Goethals, Development of a high strength Cu-Ni-Cr-Nb rail steel, Rail Steel Symp., ISI, London, 1972.
8. K. Morton, D.F. Cannon, P. Clayton and E.G. Jones, The assessment of rail steels, in D.H. Stone and G.G. Krupp (eds.), Rail Steels: Developments, Processing and Use, ASTM STP 644, ASTM, 1978, pp. 80-98.
9. Y. Ohmori, H. Ohtani and T. Kunitake, Bainite in low-carbon low-alloy high strength steels, Trans. ISI Jpn., 11 (1971) 250-259.
10. B.L. Bramfitt and J.G. Speer, A perspective on the morphology of bainite, Met. Trans., 21A (1990) 817-829.
11. L.J. Habraken and M. Economopoulos, Bainitic microstructure in low-carbon alloy steels and their mechanical properties, transformation and hardenability in steels, in: Climax Molybdenum, Ann Arbor, MI, USA, 1967, pp. 69-107.
12. W. Steven and A.G. Haynes, The temperature of formation of martensite and bainite in low alloy steels: Some effects of chemical composition, JISI, 183 (1956) 349-359.
13. R. Devanathan, Wear behavior of bainitic steels, Ph.D. Thesis, Oregon Graduate Institute of Science and Technology, 1991.
14. W. Heller and R. Schweitzer, Hardness microstructure and wear behavior of steel rails, 2nd Int. Heavy Haul Railway Conf., Colorado Springs, CO, 1982, pp. 282-286.
15. H. Ichinose, J. Takehara and M. Ueda, High strength rails produced by two stage flame heating and slack quenching, 2nd Int. Heavy Haul Railway Conference, Colorado Springs, CO, 1982, pp. 178-186.
16. H. Masumoto, K. Sugino and H. Hayashida, Development of wear resistant and anti-shelling high strength rails in Japan, Heavy Haul Railway Conf., Inst Engineers, Perth, Australia, September 1978.
17. J. Kalousek, D.M. Fegredo and E.E. Laufer, Wear resistance and worn metallography of pearlite, bainite and tempered microstructures of high hardness, Wear of Materials, ASME, New York, 1985, pp. 212-232.
18. P.J. Mutton, The influence of microstructure on the wear behavior of rail and wheel materials, M.App.S. Thesis, University of Melbourne, 1985.
19. P. Clayton, K.J. Sawley, P.J. Bolton and G.M. Pell, Wear behavior of bainitic steels, Wear, 120 (1987) 199-220.
20. P. Clayton and M.B.P. Allery, Metallurgical aspects of surface damage problems in rails, Canadian Metall. Quarterly, 21 (1982) 31-46.
21. P. Clayton, Relations between wear behavior and basic material properties for pearlitic steels, Wear, 60 (1980) 75-93.
22. N.C. Welsh, The dry wear of steels, Phil. Trans. R. Soc. Lond., A257 (1965) 32-72.
23. J.F. Archard and W. Hirst, The wear of metals under unlubricated conditions, Proc. R. Soc. Lond., A236 ( 1956) 397-410.
24. W.R. Callender, Bainitic steels for railway applications, Ph.D. Thesis, Sheffield University, England, 1983.
25. P.J. Bolton and P. Clayton, Rolling-sliding wear damage in rail and tyre steels, Wear, 93 (1984) 145-165.
26. D. Danks and P. Clayton, Comparison of the wear process foreutectoid rail steels: Field and laboratory tests, Wear, 120 (1987) 233-250.
27. P. Clayton, D. Danks and R.K. Steele, Assessment of eutectoid rail steel wear performance using laboratory tests, Proc. Conf. Antiwear '88, September 20-22, 1988, Royal Society, London, 1988.
28. R. Devanathan and P. Clayton, Rolling/sliding wear behavior of three bainitic steels, Wear, 151 (1991) 255-267.
29. P. Clayton, R. Devanathan, V. Dikshit, D.E. Christensen, D. Danks and R.K. Steele, Recent research on wear, deformation and fatigue of steels in rolling contact, Proc. Conf. 34th Mech. Working and Steel, Montreal, October 1992, ISS-AIME.
30. J.E. Garnham and J.E. Beynon, Dry rolling-sliding wear of bainitic and pearlitic steels, Wear, 157 (1992) 81-109.
31. K.J. Sawley, J.A. Benyon and E.G. Jones, Bainitic steels for railway wheels, 9th Int. Wheelset Congress, Montreal, 1988.
32. H.K.D.H. Bhadeshia, Private communication, 1991.
33. [33 ] H.K.D.H. Bhadeshia and D.V. Edmonds, Bainite in silicon steels: New composition-property approach, Part I, Met. Science, 17 (1983) 411-419.
34. H.K.D.H. Bhadeshia and D.V. Edmonds, Bainite in silicon steels: New composition-property approach, Part 2, Met. Science, 17 (1983) 420-425.
35. N. Jin and P. Clayton, Effect of microstructure on rolling/sliding wear of low carbon bainitic steels, submitted to Wear, 1996.
36. N. Jin, Mechanical properties and wear performance of bainitic steels, Ph.D. Thesis, Oregon Graduate Institute of Science and Technology, 1995.
37. D. Danks, Wear and microstructure of eutectoid steels, Ph.D. Thesis, Oregon Graduate Institute of Science and Technology, 1989.
38. X. Su, Surface initiated rolling/sliding contact fatigue in pearlitic and low/medium carbon bainitic steels, Ph.D. Thesis, Oregon Graduate Institute of Science and Technology, 1996.
39. M.K. Graf, H.-G. Hillenbrand and P.A. Peters, Accelerated cooling of plate for high-strength large-diameter pipe, Accelerated Cooling of Steel, TMS-AIME, 1985, pp. 165-179.
40. M.S. Bhat, V.F. Zackay and E.R. Parker, Alloy design for abrasive wear, Wear of Materials 1979, ASME, New York, 1979, pp. 286-291.
41. N.J. Kar, Investigation of the role of microstructures on the two-body wear resistance of steels, Wear of Materials 1983, ASME, New York, 1983, pp. 415-425.
42. W.J. Salesky and G. Thomas, Design of medium carbon steels for wear applications, Wear of Materials 1983, ASME, New York, 1983, pp. 298-305.
43. J. Qu, H. Wang, Q. Zhang and H. Shao, Development and impact-abrasion behavior of new austenite-bainite low alloy steel, Chin. J. Met. Sci. Technol., 8 (1992) 411-416.
44. K.H. Zum Gahr, How microstructure affects abrasive wear resistance, Met. Prog., 116 (1919) 46-52.
45. D. Zhu, F. Wang, Q. Cai, M. Zhang and Y. Chang, Effect of retained austenite on rolling element fatigue and its mechanism, Wear, 105 (1985) 223-234.
46. [46 ] T. Bojarski and T. Bold, Structure and properties of carbide free bainite, Acta Met., 22 (1974) 1223-1234.
47. F.B. Pickering, The structure and properties of bainite in steels, Transformation and Hardenability in Steels, Climax Molybdenum, Ann Arbor, MI, 1967, pp. 109-132.
48. L.-Å. Norström, On the yield strength of quenched low-carbon lath martensite, Scand. J. Metall., 5 (1976) 159-165.
49. G.R. Speich, Tempering of low-carbon martensite, Trans. Met. Soc. AIME, 254 (1969) 2553-2564.
50. M. Kehoe and P.M. Kelly, The role of carbon in the strength of ferrous martensite, Scripta Metall., 4 (1970) 473-476.