A descriptor-based design methodology for developing heterogeneous microstructural materials system

Journal of Mechanical Design, Transactions of the ASME

Volumn 136, Issue 5, 2014, Pages

  Xu, Hongyi ^a   Li, Yang ^a   Brinson, Catherine ^a   Chen, Wei ^a  

^a Northwestern University   (United States)

Author keywords

characterization; descriptor; material design; microstructure; polymer nanocomposites; reconstruction

Indexed keywords

DESIGN OF EXPERIMENTS; DISPERSIONS; FINITE ELEMENT METHOD; MULTIOBJECTIVE OPTIMIZATION; NANOCOMPOSITES; SENSITIVITY ANALYSIS; STOCHASTIC SYSTEMS;

CHARACTERIZATION; DESCRIPTORS; DESIGN EVALUATION; MATERIAL SYSTEMS; MATERIALS DESIGN; MICRO-STRUCTURAL; MICROSTRUCTURE DESIGN; POLYMER NANOCOMPOSITE; POLYMER-NANOCOMPOSITE; RECONSTRUCTION;

MICROSTRUCTURE;

EID: 84900413891     PISSN: 10500472     EISSN: None     Source Type: Journal    
DOI: 10.1115/1.4026649     Document Type: Article

References (56)

1. McDowell, D. L., and Olson, G. B., 2008, "Concurrent Design of Hierarchical Materials and Structures," Scientific Modeling and Simulation SMNS, pp. 1-34.
2. Panchal, J. H., Kalidindi, S. R., and McDowell, D. L., 2013, "Key Computational Modeling Issues in Integrated Computational Materials Engineering," Comput. Aided Des., 45(1), pp. 4-25.
3. Broderick, S., Suh, C., Nowers, J., Vogel, B., Mallapragada, S., Narasimhan, B., and Rajan, K., 2008, "Informatics for Combinatorial Materials Science," JOM, 60, pp. 56-59.
4. Ashby, M., 2005, Materials Selection in Mechanical Design, Butterworth-Heinemann, Burlington, MA.
5. Karasek, L., and Sumita, M., 1996, "Characterization of Dispersion State of Filler and Polymer-Filler Interactions in Rubber Carbon Black Composites," J. Mater. Sci., 31, pp. 281-289.
6. Pollock, T. M., Allison, J. E., Backman, D. G., Boyce, M. C., Gersh, M., Holm, E. A., LeSar, R., Long, M., Powell, A. C. IV, Schirra, J. J., Whitis, D. D., and Woodward, C., 2008, "Integrated Computational Materials Engineering: A Transformational Discipline for Improved Competitiveness and National Security," National Materials Advisory Board ISBN-10: 0-309-11999-5.
7. Sundararaghavan, V., and Zabaras, N., 2009, "A Statistical Learning Approach for the Design of Polycrystalline Materials," Stat. Anal. Data Min., 1, pp. 306-321.
8. Lewis, A. C., Suh, C., Stukowski, M., Geltmacher, A. B., Rajan, K., and Spanos, G., 2008, "Tracking Correlations Between Mechanical Response and Microstructure in Three-Dimensional Reconstructions of a Commercial Stainless Steel," Scr. Mater., 58, pp. 575-578.
9. Fullwood, D. T., Niezgoda, S. R., Adams, B. L., and Kalidindi, S. R., 2010, "Microstructure Sensitive Design for Performance Optimization," Prog. Mater. Sci., 55, pp. 477-562.
10. Saheli, G., Garmestani, H., and Adams, B. L., 2004, "Microstructure Design of a Two Phase Composite Using Two-Point Correlation Functions," J. Comput.- Aided Mater. Des., 11, pp. 103-115.
11. Liu, Y., Steven Greene, M., Chen, W., Dikin, D. A., and Liu, W. K., 2013, "Computational Microstructure Characterization and Reconstruction to Enable Stochastic Multiscale Design," Comput. Aided Des., 45(1), pp. 65-76.
12. Rollett, A. D., Lee, S. B., Campman, R., and Rohrer, G. S., 2007, "Three-Dimensional Characterization of Microstructure by Electron Back-Scatter Diffraction," Ann. Rev. Mater. Res., 37, pp. 627-658.
13. Borbely, A., Csikor, F. F., Zabler, S., Cloetens, P., and Biermann, H., 2004, "Three-Dimensional Characterization of the Microstructure of a Metal-Matrix Composite by Holotomography," Mater. Sci. Eng., A, 367, pp. 40-50.
14. Tewari, A., and Gokhale, A. M., 2004, "Nearest-Neighbor Distances Between Particles of Finite Size in Three-Dimensional Uniform Random Microstructures," Mater. Sci. Eng., A, 385, pp. 332-341.
15. Pytz, R., 2004, "Microstructure Description of Composites, Statistical Methods, Mechanics of Microstructure Materials," CISM Courses and Lectures.
16. Steinzig, M., and Harlow, F., 1999, "Probability Distribution Function Evolution for Binary Alloy Solidification," Solidification, Proceedings of the Minerals, Metals, Materials Society Annual Meeting, San Diego, CA, pp. 197-206.
17. Scalon, J. D., Fieller, N. R. J., Stillman, E. C., and Atkinson, H. V., 2003, "Spatial Pattern Analysis of Second-Phase Particles in Composite Materials," Mater. Sci. Eng., A, 356, pp. 245-2573.
18. Torquato, S., 2002, Random Heterogeneous Materials: Microstructure and Macroscopic Properties, Springer-Verlag, New York.
19. Sundararaghavan, V., and Zabaras, N., 2005, "Classification and Reconstruction of Three-Dimensional Microstructures Using Support Vector Machines," Comput. Mater. Sci., 32, pp. 223-239.
20. Basanta, D., Miodownik, M. A., Holm, E. A., and Bentley, P. J., 2005, "Using Genetic Algorithms to Evolve Three-Dimensional Microstructures From Two-Dimensional Micrographs," Metall. Mater. Trans. A, 36A, pp. 1643-1652.
21. Holotescu, S., and Stoian, F. D., 2011, "Prediction of Particle Size Distribution Effects on Thermal Conductivity of Particulate Composites," Materialwiss. Werkstofftech., 42, pp. 379-385.
22. Klaysom, C., Moon, S. H., Ladewig, B. P., Lu, G. Q. M., and Wang, L. Z., 2011, "The Effects of Aspect Ratio of Inorganic Fillers on the Structure and Property of Composite Ion-Exchange Membranes," J. Colloid Interface Sci., 363, pp. 431-439.
23. Gruber, J., Rollett, A. D., and Rohrer, G. S., 2010, "Misorientation Texture Development During Grain Growth. Part II: Theory," Acta Mater., 58, pp. 14-19.
24. Vaithyanathan, V., Wolverton, C., and Chen, L. Q., 2002, "Multiscale Modeling of Precipitate Microstructure Evolution," Phys. Rev. Lett., 88(12), p. 125503.
25. Breneman, C. M., Brinson, L. C., Schadler, L. S., Natarajan, B., Krein, M., Wu, K., Morkowchuk, L., Li, Y., Deng, H., and Xu, H., 2013 "Stalking the Materials Genome: A Data-Driven Approach to the Virtual Design of Nanostructured Polymers.," Adv. Funct. Mater. 23(46), pp. 5746-5752.
26. Quiblier, J. A., 1984, "A New Three-Dimensional Modeling Technique for Studying Porous-Media," J. Colloid Interface Sci., 98, pp. 84-102.
27. Jiang, Z., Chen, W., and Burkhart, C., 2013, "Efficient 3D porous microstructure reconstruction via Gaussian random field and hybrid optimization," J. Microsc., 252(2), pp. 135-148.
28. Grigoriu, M., 2003, "Random Field Models for Two-Phase Microstructures," J. Appl. Phys., 94, pp. 3762-3770.
29. Takeuchi, I., Lippmaa, M., and Matsumoto, Y., 2006, "Combinatorial Experimentation and Materials Informatics," MRS Bull., 31, pp. 999-1003.
30. Fischer, C. C., Tibbetts, K. J., Morgan, D., and Ceder, G., 2006, "Predicting Crystal Structure by Merging Data Mining With Quantum Mechanics," Nat. Mater., 5, pp. 641-646.
31. Sigmund, O., and Torquato, S., 1997, "Design of Materials With Extreme Thermal Expansion Using a Three-Phase Topology Optimization Method," J. Mech. Phys. Solids, 45, pp. 1037-1067.
32. Tian, R., Chan, S., Tang, S., Kopacz, A. M., Wang, J. S., Jou, H. J., Siad, L., Lindgren, L. E., Olson, G. B., and Liu, W. K., 2010, "A Multiresolution Continuum Simulation of the Ductile Fracture Process," J. Mech. Phys. Solids, 58, pp. 1681-1700.
33. Xu, H., Dmitriy, D. A., Burkhart, C., and Chen, W., 2014, "Descriptor-based methodology for statistical characterization and 3D reconstruction of microstructural materials," Comput. Mater. Sci., 85, pp. 206-216.
34. Kanit, T., Forest, S., Galliet, I., Mounoury, V., and Jeulin, D., 2003, "Determination of the Size of the Representative Volume Element for Random Composites: Statistical and Numerical Approach," Int. J. Solids Struct., 40, pp. 3647-3679.
35. Debye, P., and Bueche, A. M., 1949, "Scattering by an Inhomogeneous Solid," J. Appl. Phys., 20, pp. 518-525.
36. Corson, P. B., 1974, "Correlation-Functions for Predicting Properties of Heterogeneous Materials.1. Experimental Measurement of Spatial Correlation-Functions in Multiphase Solids," J. Appl. Phys., 45, pp. 3159-3164.
37. Garmestani, H., Lin, S., Adams, B. L., and Ahzi, S., 2001, "Statistical Continuum Theory for Large Plastic Deformation of Polycrystalline Materials," J. Mech. Phys. Solids, 49, pp. 589-607.
38. Torquato, S., 2006, "Necessary Conditions on Realizable Two-Point Correlation Functions of Random Media," Ind. Eng. Chem. Res., 45, pp. 6923-6928.
39. Yeong, C. L. Y., and Torquato, S., 1998, "Reconstructing Random Media," Phys. Rev. E, 57, pp. 495-506.
40. Sundararaghavan, V., and Kumar, A., 2012, "Probabilistic Modeling of Microstructure Evolution Using Finite Element Representation of Statistical Correlation Functions," Int. J. Plast., 30-31, pp. 62-80.
41. Montgomery, D. C., 2004, Design and Analysis of Experiments, 6th ed., John Wiley & Sons, Inc., Hoboken, NJ.
42. Jin, R., Chen, W., and Simpson, T. W., 2001, "Comparative Studies of Metamodelling Techniques Under Multiple Modelling Criteria," Struct. Multidiscip. Optim., 23, pp. 1-13.
43. Greene, M. S., Xu, H., Tang, S., Chen, W., and Liu, W. K., 2012, "A Generalized Uncertainty Propagation Criterioark Studies of Microstructured Material Systems," Comput. Methods Appl. Mech. Eng., 254, pp. 271-291.
44. Xu, H., Greene, M. S., Deng, H., Dikin, D. A., Brinson, L. C., Liu, W. K., Burkhart, C., Papakonstantopoulos, G., Poldneff, M., and Chen, W., 2013, "A Stochastic Reassembly Strategy for Managing Information Complexity in Heterogeneous Materials Analysis and Design," ASME J. Mech. Des., 135(10), p. 101010.
45. Chen, W., Jin, R., and Sudjianto, A., 2005, "Analytical Variance-Based Global Sensitivity Analysis in Simulation-Based Design Under Uncertainty," ASME J. Mech. Des., 127, pp. 875-886.
46. Ramanathan, T., Abdala, A. A., Stankovich, S., Dikin, D. A., Herrera-Alonso, M., Piner, R. D., Adamson, D. H., Schniepp, H. C., Chen, X., Ruoff, R. S., Nguyen, S. T., Aksay, I. A., Prud'homme, R. K., and Brinson, L. C., 2008, "Functionalized Graphene Sheets for Polymer Nanocomposites," Nat. Nanotechnol., 3, pp. 327-331.
47. Zheng, W., and Wong, S. C., 2003, "Electrical Conductivity and Dielectric Properties of PMMA/Expanded Graphite Composites," Compos. Sci. Technol., 63, pp. 225-235.
48. Meyers, M. A., and Chawla, K. K., 2009, Mechanical Behavior of Materials, Cambridge University, Cambridge, UK.
49. Brinson, L. C. B. H. F., 2007, Polymer Engineering Science and Viscoelasticity: An Introduction, Springer, New York.
50. Deng, H., Liu, Y., Gai, D., Dikin D. A., Putz, K. W., Chen, W., Brinson, L., Burkhart, C., Poldneff, B., Jiang, B., and Papakonstantopoulos, G. J., 2012, "Utilizing Real and Statistically Reconstructed Microstructures for the Viscoelastic Modeling of Polymer Nanocomposites," Compos. Sci. Technol., 72(14), pp. 1725-1732.
51. Petelet, M., Iooss, B., Asserin, O., and Loredo, A., 2010, "Latin Hypercube Sampling With Inequality Constraints," Asta-Adv. Stat. Anal., 94, pp. 325-339.
52. Jin, R. C., Chen, W., and Sudjianto, A., 2005, "An Efficient Algorithm for Constructing Optimal Design of Computer Experiments," J. Stat. Plann. Inference, 134, pp. 268-287.
53. Jin, R., Du, X., and Chen, W., 2003, "The Use of Metamodeling Techniques for Optimization Under Uncertainty," Struct.Multidiscipl. Optim., 25, pp. 99-116.
54. Saltelli, A., 2002, "Sensitivity Analysis for Importance Assessment," Risk Anal., 22, pp. 579-590.
55. Archer, G. E. B., Saltelli, A., and Sobol, I. M., 1997, "Sensitivity Measures, ANOVA-Like Techniques and the Use of Bootstrap," J. Stat. Comput. Simul., 58, pp. 99-120.
56. Deb, K., 2002, "A Fast and Elitist Multiobjective Genetic Algorithm: NSGA-II," IEEE Trans. Evol. Comput., 6, pp. 182-197.