High-strength mineralized collagen artificial bone

Frontiers of Materials Science

Volumn 8, Issue 1, 2014, Pages 53-62

  Qiu, Zhi Ye ^a   Tao, Chun Sheng ^a   Cui, Helen ^b   Wang, Chang Ming ^b   Cui, Fu Zhai ^a  

^a TSINGHUA UNIVERSITY   (China)

^b Beijing Astronautics Huixin Science and Technology Co Ltd   (China)

Author keywords

biomimetic mineralization; cold compression molding; high strength; mineralized collagen (MC)

Indexed keywords

EID: 84899630628     PISSN: 2095025X     EISSN: 20950268     Source Type: Journal    
DOI: 10.1007/s11706-014-0237-9     Document Type: Article

References (49)

1. Fu Q, Saiz E, Tomsia A P. Direct ink writing of highly porous and strong glass scaffolds for load-bearing bone defects repair and regeneration. Acta Biomaterialia, 2011, 7(10): 3547-3554.
2. Sakellariou V I, Mavrogenis A F, Babis G C, et al. Comparison of four reconstructive methods for diaphyseal defects of the humerus after tumor resection. Journal of Applied Biomechanics, 2012, 28(5): 568-578.
3. Edwards P K, Ackland T R, Ebert J R. Accelerated weightbearing rehabilitation after matrix-induced autologous chondrocyte implantation in the tibiofemoral joint: early clinical and radiological outcomes. The American Journal of Sports Medicine, 2013, 41(10): 2314-2324.
4. Thalgott J S, Fogarty M E, Giuffre J M, et al. A prospective, randomized, blinded, single-site study to evaluate the clinical and radiographic differences between frozen and freeze-dried allograft when used as part of a circumferential anterior lumbar interbody fusion procedure. Spine, 2009, 34(12): 1251-1256.
5. Roohani-Esfahani S I, Dunstan C R, Li J J, et al. Unique microstructural design of ceramic scaffolds for bone regeneration under load. Acta Biomaterialia, 2013, 9(6): 7014-7024.
6. Abbah S A, Lam C X, Hutmacher D W, et al. Biological performance of a polycaprolactone-based scaffold used as fusion cage device in a large animal model of spinal reconstructive surgery. Biomaterials, 2009, 30(28): 5086-5093.
7. Wieding J, Fritsche A, Heinl P, et al. Biomechanical behavior of bone scaffolds made of additive manufactured tricalciumphosphate and titanium alloy under different loading conditions. Journal of Applied Biomaterials Functional Materials, 2013, 11(3): 159-166.
8. Kujala S, Tuukkanen J, Jämsä T, et al. Comparison of the bone modeling effects caused by curved and straight nickel - titanium intramedullary nails. Journal of Materials Science: Materials in Medicine, 2002, 13(12): 1157-1161.
9. Behrbalk E, Uri O, Parks R M, et al. Fusion and subsidence rate of stand alone anterior lumbar interbody fusion using PEEK cage with recombinant human bone morphogenetic protein-2. European Spine Journal, 2013, 22(12): 2869-2875.
10. van der Elst M, Klein C P, de Blieck-Hogervorst J M, et al. Bone tissue response to biodegradable polymers used for intra medullary fracture fixation: a long-term in vivo study in sheep femora. Biomaterials, 1999, 20(2): 121-128.
11. Samartzis D, Shen F H, Goldberg E J, et al. Is autograft the gold standard in achieving radiographic fusion in one-level anterior cervical discectomy and fusion with rigid anterior plate fixation? Spine, 2005, 30(15): 1756-1761.
12. Gibson S, McLeod I, Wardlaw D, et al. Allograft versus autograft in instrumented posterolateral lumbar spinal fusion: a randomized control trial. Spine, 2002, 27(15): 1599-1603.
13. Sun L, Hu Y, Ning Z, et al. The correlation between immune rejection and osteoinduction of allogeneic bone grafting. Chinese Medical Journal, 1998, 111(9): 818-822.
14. Benli S, Aksoy S, Havitcioǧlu H, et al. Evaluation of bone plate with low-stiffness material in terms of stress distribution. Journal of Biomechanics, 2008, 41(15): 3229-3235.
15. Shi X, Jiang J, Sun L, et al. Hydrolysis and biomineralization of porous PLA microspheres and their influence on cell growth. Colloids and Surfaces B: Biointerfaces, 2011, 85(1): 73-80.
16. Cui F Z, Li Y, Ge J. Self-assembly of mineralized collagen composites. Materials Science and Engineering R: Reports, 2007, 57(1-6): 1-27.
17. Du C, Cui F Z, Zhang W, et al. Formation of calcium phosphate/collagen composites through mineralization of collagen matrix. Journal of Biomedical Materials Research, 2000, 50(4): 518-527.
18. Zhang W, Liao S S, Cui F Z. Hierarchical self-assembly of nano-fibrils in mineralized collagen. Chemistry of Materials, 2003, 15(16): 3221-3226.
19. Liao S S, Cui F Z, Zhang W, et al. Hierarchically biomimetic bone scaffold materials: nano-HA/collagen/PLA composite. Journal of Biomedical Materials Research Part B: Applied Biomaterials, 2004, 69B(2): 158-165.
20. Hvistendahl M. China's push in tissue engineering. Science, 2012, 338(6109): 900-902.
21. Lian K, Lu H, Guo X, et al. The mineralized collagen for the reconstruction of intra-articular calcaneal fractures with trabecular defects. Biomatter, 2013, 3(4): e27250 (5 pages).
22. Yu X, Xu L, Cui F Z, et al. Clinical evaluation of mineralized collagen as a bone graft substitute for anterior cervical intersomatic fusion. Journal of Biomaterials and Tissue Engineering, 2012, 2(2): 170-176.
23. Lam C X F, Savalani M M, Teoh S-H, et al. Dynamics of in vitro polymer degradation of polycaprolactone-based scaffolds: accelerated versus simulated physiological conditions. Biomedical Materials, 2008, 3(3): 034108.
24. Willnecker J. Novel approaches towards primate toxicology. In: Weinbauer G F, Vogel F, eds. Novel Approaches towards Primate Toxicology. Münster: Waxmann, 2006, 13-19.
25. An Y H. Mechanical properties of bone. In: An Y H, Draughn R A, eds. Mechanical Testing of Bone and the Bone-Implant Interface. CRC Press, 1999, 41-63.
26. Mutlu I, Oktay E. Biocompatibility of 17-4 PH stainless steel foam for implant applications. Bio-Medical Materials and Engineering, 2011, 21(4): 223-233.
27. Li J P, Li S H, van Blitterswijk C A, et al. Cancellous bone from porous Ti6Al4V by multiple coating technique. Journal of Materials Science: Materials in Medicine, 2006, 17(2): 179-185.
28. Dall'Ara E, Karl C, Mazza G, et al. Tissue properties of the human vertebral body sub-structures evaluated by means of microindentation. Journal of the Mechanical Behavior of Biomedical Materials, 2013, 25: 23-32.
29. Bosisio M R, Talmant M, Skalli W, et al. Apparent Young's modulus of human radius using inverse finite-element method. Journal of Biomechanics, 2007, 40(9): 2022-2028.
30. Zhao M, An M, Wang Q, et al. Quantitative proteomic analysis of human osteoblast-like MG-63 cells in response to bioinert implant material titanium and polyetheretherketone. Journal of Proteomics, 2012, 75(12): 3560-3573.
31. Pan J, Wang Y, Qin S, et al. Grafting reaction of poly(D, L) lactic acid with maleic anhydride and hexanediamine to introduce more reactive groups in its bulk. Journal of Biomedical Materials Research Part B: Applied Biomaterials, 2005, 74B(1): 476-480.
32. Meyers S R, Khoo X, Huang X, et al. The development of peptidebased interfacial biomaterials for generating biological functionality on the surface of bioinert materials. Biomaterials, 2009, 30(3): 277-286.
33. Dunne C F, Twomey B, O'Neill L, et al. Co-blasting of titanium surfaces with an abrasive and hydroxyapatite to produce bioactive coatings: substrate and coating characterisation. Journal of Biomaterials Applications, 2014, 28(5): 767-778.
34. Jun S H, Lee E J, Jang T S, et al. Bone morphogenic protein-2 (BMP-2) loaded hybrid coating on porous hydroxyapatite scaffolds for bone tissue engineering. Journal of Materials Science: Materials in Medicine, 2013, 24(3): 773-782.
35. Grinet M A V M, Zanin H, Campos Granato A E, et al. Fast preparation of free-standing nanohydroxyapatite-vertically aligned carbon nanotube scaffolds. Journal of Materials Chemistry B, 2014, 2(9): 1196-1204.
36. Reed M J, Damodarasamy M, Chan C K, et al. Cleavage of hyaluronan is impaired in aged dermal wounds. Matrix Biology, 2013, 32(1): 45-51.
37. Del Buono A, Chan O, Maffulli N. Achilles tendon: functional anatomy and novel emerging models of imaging classification. International Orthopaedics, 2013, 37(4): 715-721.
38. Domaschke H, Gelinsky M, Burmeister B, et al. In vitro ossification and remodeling of mineralized collagen I scaffolds. Tissue Engineering, 2006, 12(4): 949-958.
39. Wang Y, Cui F Z, Hu K, et al. Bone regeneration by using scaffold based on mineralized recombinant collagen. Journal of Biomedical Materials Research Part B: Applied Biomaterials, 2008, 86B(1): 29-35.
40. Liao S S, Cui F Z. In vitro and in vivo degradation of mineralized collagen-based composite scaffold: nanohydroxyapatite/collagen/poly(L-lactide). Tissue Engineering, 2004, 10(1-2): 73-80.
41. Zhang X, Guo WG, Cui H, et al. In vitro and in vivo enhancement of osteogenic capacity in a synthetic BMP-2 derived peptidecoated mineralized collagen composite. Journal of Tissue Engineering and Regenerative Medicine, 2014, doi: 10. 1002/term. 1705.
42. Zeugolis D I, Li B, Lareu R R, et al. Collagen solubility testing, a quality assurance step for reproducible electro-spun nano-fibre fabrication. A technical note. Journal of Biomaterials Science: Polymer Edition, 2008, 19(10): 1307-1317.
43. Maroudas A I. Balance between swelling pressure and collagen tension in normal and degenerate cartilage. Nature, 1976, 260(5554): 808-809.
44. Elden H R. Rate of swelling of collagen. Science, 1958, 128(3339): 1624-1625.
45. Gupta A, Tripathi G, Lahiri D, et al. Compression molded ultra high molecular weight polyethylene-hydroxyapatite-aluminum oxide-carbon nanotube hybrid composites for hard tissue replacement. Journal of Materials Science and Technology, 2013, 29(6): 514-522.
46. Zhang Z, Li G, Shi B. Physicochemical properties of collagen, gelatin and collagen hydrolysate derived from bovine limed split wastes. Journal of the Society of Leather Technologists and Chemists, 2006, 90(1): 23-28.
47. Li Y, Li Y, Du Z, et al. Comparison of dynamic denaturation temperature of collagen with its static denaturation temperature and the configuration characteristics in collagen denaturation processes. Thermochimica Acta, 2008, 469(1-2): 71-76.
48. Navarro M, Michiardi A, Castaño O, et al. Biomaterials in orthopaedics. Journal of the Royal Society: Interface, 2008, 5(27): 1137-1158.
49. Johnson K A. Wolff's law continues to inspire orthopaedic research. Veterinary and Comparative Orthopaedics and Traumatology, 2014, 27(1): V-VI.