Biomechanical behavior of bone scaffolds made of additive manufactured tricalciumphosphate and titanium alloy under different loading conditions

Journal of Applied Biomaterials and Functional Materials

Volumn 11, Issue 3, 2013, Pages 159-166

  Wieding, Jan ^a   Fritsche, Andreas ^a   Heinl, Peter ^b   Körner, Carolin ^a   Cornelsen, Matthias ^c   Seitz, Hermann ^c   Mittelmeier, Wolfram ^a   Bader, Rainer ^a  

^a ROSTOCK UNIVERSITY MEDICAL CENTER   (Germany)

^b UNIVERSITY OF ERLANGEN NUREMBERG   (Germany)

^c UNIVERSITY OF ROSTOCK   (Germany)

Author keywords

Bone scaffolds; Large segmental bone defects; Mechanical properties; Sintered tricalciumphosphate; Static loading; Titanium

Indexed keywords

3D PRINTERS; BIOMECHANICS; BONE; COMPRESSIVE STRENGTH; DEFECTS; MECHANICAL STABILITY; PORE SIZE; SCAFFOLDS; SCAFFOLDS (BIOLOGY); TENSILE STRENGTH; TITANIUM ALLOYS; TRANSMISSION CONTROL PROTOCOL;

BIOMECHANICAL BEHAVIOR; BONE SCAFFOLDS; LARGE SEGMENTAL BONE DEFECT; LOADING CONDITION; ORTHOPAEDIC SURGERY; SEGMENTAL BONE DEFECT; SINTERED TRICALCIUMPHOSPHATE; STATIC LOADING; TITANIUM (ALLOYS); ULTIMATE COMPRESSIVE STRENGTH;

SINTERING;

BIOMATERIAL; TITANIUM; TRICALCIUMPHOSPHATE; UNCLASSIFIED DRUG;

ARTICLE; BIOMECHANICS; BIORESORBABLE SCAFFOLD; BONE DEFECT; BONE PLATE; BONE SCAFFOLD; COMPOSITE GRAFT; COMPRESSIVE STRENGTH; FEMUR; GEOMETRY; LOADING TEST; MECHAICAL STABILITY; NANOFABRICATION; OSTEOSYNTHESIS; PARTICLE SIZE; TENSILE STRENGTH;

BONE SUBSTITUTES; CALCIUM PHOSPHATES; COMPRESSIVE STRENGTH; COMPUTER-AIDED DESIGN; ELASTIC MODULUS; HUMANS; MATERIALS TESTING; TENSILE STRENGTH; TISSUE SCAFFOLDS; TITANIUM;

EID: 84888812718     PISSN: None     EISSN: 22808000     Source Type: Journal    
DOI: 10.5301/JABFM.2013.10832     Document Type: Article

References (31)

1. Linhart W, Briem D, Amling M, Rueger JM, Windolf J. [Mechanical failure of porous hydroxyapatite ceramics 7.5 years after implantation in the proximal tibial]. Unfallchirurg 2004; 107: 154-7.
2. Younger EM, Chapman MW. Morbidity at bone graft donor sites. J Orthop Trauma 1989; 3: 192-5.
3. Briem D, Linhart W, Lehmann W, Meenen NM, Rueger JM. [Long-term outcomes after using porous hydroxyapatite ceramics (Endobon) for surgical management of fractures of the head of the tibia]. Unfallchirurg 2002; 105: 128-33.
4. Klein CP, Patka P, den HW. Macroporous calcium phosphate bioceramics in dog femora: a histological study of interface and biodegradation. Biomaterials 1989; 10: 59-62.
5. Yamasaki N, Hirao M, Nanno K et al. A comparative assessment of synthetic ceramic bone substitutes with different composition and microstructure in rabbit femoral condyle model. J Biomed Mater Res B Appl Biomater 2009; 91: 788-98.
6. Johnson KD, Frierson KE, Keller TS et al. Porous ceramics as bone graft substitutes in long bone defects: a biomechanical, histological, and radiographic analysis. J Orthop Res 1996; 14: 351-69.
7. Sciadini MF, Dawson JM, Johnson KD. Evaluation of bovinederived bone protein with a natural coral carrier as a bonegraft substitute in a canine segmental defect model. J Orthop Res 1997; 15: 844-57.
8. Predecki P, Stephan JE, Auslaender BA, Mooney VL, Kirkland K. Kinetics of bone growth into cylindrical channels in aluminum oxide and titanium. J Biomed Mater Res 1972; 6: 375-400.
9. Ponader S, von Wilmowsky C, Widenmayer M, et al. In vivo performance of selective electron beam-melted Ti-6Al-4V structures. J Biomed Mater Res A 2010; 92: 56-62.
10. Jonitz A, Wieding J, Lochner K et al. Migration capacity and viability of human primary osteoblasts in synthetic threedimensional bone scaffolds made of tricalciumphosphate. Materials (Basel) 2011; 4: 1249-59.
11. Heinl P, Koerner C, Singer RF. Selective electron beam melting of cellular titanium: mechanical properties. Adv Eng Mater 2008; 10: 882-8.
12. Seitz H, Rieder W, Irsen S, Leukers B, Tille C. Threedimensional printing of porous ceramic scaffolds for bone tissue engineering. J Biomed Mater Res B Appl Biomater 2005; 74: 782-8.
13. de Vasconcellos LMR, De Oliveira MV, Graca MLD, de Vasconcellos LGO, Carvalho YR, Cairo CAA. Porous titanium scaffolds produced by powder metallurgy for biomedical applications. Materials Research-Ibero-American Journal of Materials 2008; 11: 275-80.
14. Parthasarathy J, Starly B, Raman S, Christensen A. Mechanical evaluation of porous titanium (Ti6Al4V) structures with electron beam melting (EBM). J Mech Behav Biomed Mater 2010; 3: 249-59.
15. Schwerdtfeger J, Heinl P, Singer RF, Koerner C. Auxetic cellular structures through selective electron-beam melting. Physica Status Solidi B-Basic Solid State Physics 2010; 247: 269-72.
16. Cachinho SC, Correia RN. Titanium scaffolds for osteointegration: mechanical, in vitro and corrosion behaviour. J Mater Sci Mater Med 2008; 19: 451-7.
17. Driessen AA, Klein CP, de GK. Preparation and some properties of sintered beta-whitlockite. Biomaterials 1982; 3: 113-6.
18. Metsger DS, Rieger MR, Foreman DW. Mechanical properties of sintered hydroxyapatite and tricalcium phosphate ceramic. J Mater Sci Mater Med 1999; 10: 9-17.
19. Koike M, Greer P, Owen K et al. Evaluation of titanium alloys fabricated using rapid prototyping technologies electron beam melting and laser beam melting. Materials (Basel) 2011; 4: 1776-92.
20. Seitz H, Deisinger U, Leukers B, Detsch R, Ziegler G. Different calcium phosphate granules for 3-D printing of bone tissue engineering scaffolds. Adv Eng Mater 2009; 11: B41-6.
21. Detsch R, Schaefer S, Deisinger U, Ziegler G, Seitz H, Leukers B. In vitro-osteoclastic activity studies on surfaces of 3D printed calcium phosphate scaffolds. J Biomater Appl. 2011;26(3):359-80.
22. Wieding J, Souffrant R, Fritsche A, Mittelmeier W, Bader R. Finite element analysis of osteosynthesis screw fixation in the bone stock: an appropriate method for automatic screw modelling. PLoS One 2012; 7: e33776.
23. Bergmann G, Deuretzbacher G, Heller M et al. Hip contact forces and gait patterns from routine activities. J Biomech 2001; 34: 859-71.
24. Christensen A, Kircher R, Lippincott A. Qualification of Electron Beam Melted (EBM) Ti6AI4V-ELI for orthopaedic applications. Medical Device Materials IV: Proceedings of the Materials and Processes for Medical Devices Conference 2007, 48-53. 2008. Palm Desert, CA. Medical Device Materials IV: Materials and Processes for Medical Devices Conference 2007. 23-9-2007.
25. Facchini L, Magalini E, Robotti P, Molinari A. Microstructure and mechanical properties of Ti-6Al-4V produced by electron beam melting of pre-alloyed powders. Rapid Prototyping Journal 2009; 15: 171-8.
26. Murr LE, Quinones SA, Gaytan SM et al. Microstructure and mechanical behavior of Ti-6Al-4V produced by rapid-layer manufacturing, for biomedical applications. J Mech Behav Biomed Mater 2009; 2: 20-32.
27. Harrysson OLA, CansiZoglu O, Marcellin-Little DJ, Cormier DR, West HA. Direct metal fabrication of titanium implants with tailored materials and mechanical properties using electron beam melting technology. Mater Sci Eng C Biomim Mater Sens Syst 2008; 28: 366-73.
28. Chahine G, Koike M, Okabe T, Smith P, Kovacevic R. The design and production of Ti-6Al-4V ELI customized dental implants. JOM (1989) 2008; 60: 50-5.
29. Murr LE, Gaytan SM, Medina F et al. Next-generation biomedical implants using additive manufacturing of complex, cellular and functional mesh arrays. Philos Transact A Math Phys Eng Sci 2010; 368: 1999-2032.
30. Heiney JP, Barnett MD, Vrabec GA, Schoenfeld AJ, Baji A, Njus GO. Distal femoral fixation: a biomechanical comparison of trigen retrograde intramedullary (i.m.) nail, dynamic condylar screw (DCS), and locking compression plate (LCP) condylar plate. J Trauma 2009; 66: 443-9.
31. Otto RJ, Moed BR, Bledsoe JG. Biomechanical comparison of polyaxial-type locking plates and a fixed-angle locking plate for internal fixation of distal femur fractures. J Orthop Trauma 2009; 23: 645-52.