A decision support approach for modeling sustainability consequences in an aerospace value chain

Proceedings of the ASME Design Engineering Technical Conference

Volumn 4, Issue , 2013, Pages

  Hallstedt, Sophie ^a   Thompson, Anthony W ^a   Isaksson, Ola ^b   Larsson, Tobias C ^a   Ny, Henrik ^a  

^a BLEKINGE INSTITUTE OF TECHNOLOGY   (Sweden)

^b GKN Aerospace   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

COMPUTER SIMULATION; DECISION SUPPORT SYSTEMS; DESIGN; ENVIRONMENTAL TECHNOLOGY; INDUSTRY; JET ENGINES; LIFE CYCLE; MANUFACTURE; RISK ASSESSMENT; TITANIUM ALLOYS;

AEROSPACE COMPONENTS; APPROPRIATE TECHNOLOGIES; DECISION SITUATION; ENVIRONMENTAL CHALLENGES; INTERNATIONAL RESEARCHES; LIFE CYCLE ASSESSMENT (LCA); MODEL AND SIMULATION; PRODUCT-SERVICE SYSTEMS;

SUSTAINABLE DEVELOPMENT;

EID: 84899071973     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: 10.1115/DETC2013-12975     Document Type: Conference Paper

References (63)

1. ACARE, 2002, "Strategic Research Agenda: Executive Summary," Advisory Council for Aeronautics Research in Europe, October 2002.
2. ACARE, 2004, "Strategic Research Agenda 2: Executive Summary," Advisory Council for Aeronautics Research in Europe, October 2004.
3. Agarwal, R. K., 2010, "Sustainable (Green) Aviation: Challenges and Opportunities," SAE International Journal of Aerospace, 2(1), pp. 1-20.
4. Nangia, R. K., 2006, "Operations and Aircraft Design Towards Greener Civil Aviation Using Air-to-Air Refueling," Aeronautic Journal, 110(1113), pp. 705-721.
5. Warwick, G. and Norris, G, 2011, "Open-rotor Horizon Slips to Mid-2020s," Aviation Week and Space Technology, New York, 174(4), 24 January 2011.
6. Warwick, G., 2010, "Raft of Technology Demonstrators Planned for 2012-15," Aviation Week and Space Technology, New York, 173(5), 2 August 2010.
7. Jouannet, C, Lundström, D., Amadori, K. and Berry, P., 2010, "Design and Flight Testing of an ECO-sport Aircraft," Proc. 48th AIAA Aerospace Sciences Meeting Including the New Horizons Forum and Aerospace Exposition. Article number 2010-1206.
8. Dennis, N., 2002, "Long-term Route Traffic Forecasts and Flight Schedule Pattern for a Medium-sized European Airport," Journal of Air Transport Management, 8(5), pp. 313-324.
9. Schafrik, R. E., 2009, "Accelerating Materials and Process Development," Proc. International Society for Air Breathing Engines (ISABE), 9-11 September 2009, Montreal, Canada.
10. Carpenter J., 2012, "BCA 'Closed Loop' Titanium Scrap Revert Strategy," (Key-note presentation), TITANIUM 2012 Conference, October 7-10, Atlanta, Georgia, USA.
11. Azar, C., Holmberg, J. and Lindgren, K., 1996, "Socio-Ecological Indicators for Sustainability," Ecological Economics, 18(2), pp. 89-112.
12. British Geological Survey, 2012, "British Geological Survey Risk List."
13. Haapala, K.R., Zhao, F., Camelio, J., Sutherland, J.W., Skerlos, S.J., Dornfeld, D.A., Jawahir, I.S., Zhang, H.C. and Clarens, A.F., 2011, "A Review of Engineering Research in Sustainable Manufacturing," ASME 2011 International Manufacturing Science and Engineering Conference, 2, Paper no. MSEC2011-50300 pp. 599-619.
14. Manzini, E. and Vezzoli, C., 2001., "Product-Service Systems and Sustainability: Opportunities for Sustainable Solutions," Politecnico di Milano University, Milan, Italy.
15. Mont, O. and Tukker, A., 2006, "Product-Service Systems: Reviewing Achievements and Refining the Research Agenda," Journal of Cleaner Production, 14(17), pp. 1451-1454.
16. Vargo, S. and Lusch, R., 2004., "Evolving to a New Dominant Logic for Marketing," Journal of Marketing, 68(Jan.), pp. 1-17.
17. Baines, T.S., Lightfoot, H W., Evans, S., Neely, A., Greenough, R., Peppard, J., Roy, R., Shehab, E., Braganza, A., Tiwari, A., Alcock, J R., Angus, J P., Bastl, M., Cousens, A., Irving, P., Johnson, M., Kingston, J., Lockett, H., Martinez, V., and Michele, P., 2007, "State-of-the-Art in Product-Service Systems," Proc. Institution of Mechanical Engineers, Part B., Journal of Engineering Manufacture, 221(10), p.1543-1552.
18. Isaksson, O., Larsson, T. and Rönnbäck, A.Ö., 2009, "Development of Product-Service Systems: Challenges and Opportunities for the Manufacturing Firm," Journal of Engineering Design, 20(4), pp. 329-348.
19. Morelli, N., 2006, "Developing New Product Service Systems (PSS): Methodologies and Operational Tools," Journal of Cleaner Production, 14(17), pp. 1495-1501.
20. Salvendy, G. and Karwowski, W., 2010, "Introduction to Service Engineering," Hoboken, NJ, USA, John Wiley & Sons.
21. Hockerts, K., 2008, "Property Rights as a Predictor for the Eco-Efficiency of Product-Service Systems," Copenhagen, Denmark: CBS Center for Corporate Social Responsibility.
22. International Organization for Standardization (ISO), 2004, "Environmental Management Systems - Requirements with Guidance for Use," ISO 14001, Geneva, Switzerland: ISO.
23. Aloisi de Larderel, J., 1998, "What is a Sustainable Enterprise?," Paper presented at UNEP workshop, 14 October 1998, Paris.
24. Schmidt-Bleek, F., 1997, "MIPS and Factor 10 for a Sustainable and Profitable Economy," Wuppertal Institute, Wuppertal, Germany.
25. van Weenen, H., 1997, "Design for Sustainable Development: Guides and Manuals," Dublin, Ireland, European Foundation for the Improvement of Living and Working Conditions.
26. Tischner, U., 2000, "How to do Ecodesign? A Guide for Environmentally and Economically Sound Design," Berlin, Germany, German Federal Environmental Agency.
27. Robèrt, K.H., Schmidt-Bleek, B., Aloisi de Larderel, J., Basile, G., Jansen, J.L., Kuehr, R., Price-Thomas, P., Suzuki, M., Hawken, P. and Wackernagel, M., 2002, "Strategic Sustainable Development - Selection, Design and Synergies of Applied Tools, Journal of Cleaner Production, 10(3): pp. 197-214.
28. Byggeth, S.H. and Hochschorner, E., 2006, "Handling Trade-offs in Ecodesign Tools for Sustainable Product Development and Procurement, Journal of Cleaner Production, 14(15-16), pp. 1420-30.
29. Graedel, T.E., 1998, "Streamlined Life-Cycle Assessment," Upper Saddle River, New Jersey, USA, Prentice Hall.
30. International Organization for Standardization (ISO), 2006, "Environmental Management - Life Cycle Assessment - Principles and Framework," ISO 14040, Geneva, Switzerland, ISO.
31. Ny, H., and MacDonald., J. P., Broman, G. Yamamoto, R. and Robèrt, K.H., 2006, "Sustainability Constraints as System Boundaries: An Approach to Making Life-cycle Management Strategic, Journal of Industrial Ecology 10(1), pp. 61-77.
32. Robèrt, K.H., 2000, "Tools and Concepts for Sustainable Development, How do they relate to a general framework for sustainable development, and to each other?," Journal of Cleaner Production, 8(3), 243-254.
33. Byggeth, S.H., and Broman, G., 2001, "Environmental Aspects in Product Development - An Investigation Among Small and Medium-sized Enterprises," Proc. SPIE, Environmentally Conscious Manufacturing, S. M. Gupta, ed., 4193, pp. 261-271.
34. Byggeth S.H., Broman, G. and Robèrt, K.H, 2007, "A Method for Sustainable Product Development Based on a Modular System of Guiding Questions," Journal of Cleaner Production, 15(1), pp. 1-11.
35. Ny, H., Hallstedt, S., Robèrt, K.H. and Broman, G., 2008, "Introducing Templates for Sustainable Product Development through an Evaluation Case Study of Televisions at the Matsushita Electric Group," Journal of Industrial Ecology, 12(4), pp. 600-623.
36. Ny, H., MacDonald, J.P., Robèrt, K.H. and Broman, G., 2009, "Sustainability Constraints as System Boundaries: Introductory Steps Toward Strategic Life-cycle Management," in Web-based Green Products Life Cycle Management Systems: Reverse Supply Chain Utilization, H.F. Wang, ed., Hershey, PA, USA: IGI Global.
37. Ny, H., Hallstedt, S., Ericson, Å., 2012., "A Strategic Approach for Sustainable Product Service System Development," Proc. CIRP Design 2012 - Sustainable Product Development, 28-30 March 2012, Indian Institute of Science, Bangalore, India.
38. Thompson, A.W., Ny, H., Lindahl, P., Broman, G. and Severinsson, M., 2010., "Benefits of a Product-Service System Approach for Long-life Products: The Case of Light Tubes," 2nd CIRP, IPS2 Conference, 14-15 April, Linköping, Sweden.
39. Östlin, J., Sundin, E. and Björkman, M., 2008, "Business Drivers for Remanufacturing," Proc. 15th CIRP International Conference on Life Cycle Engineering, Sydney.
40. Adams, V. and Askenazi, A., "Building Better Products with Finite Element Analysis," USA, On Word Press, 1999.
41. Prasad, B., 1997, "Concurrent Engineering Fundamentals: Integrated Product Development," Vol. II., Prentice and Hall, Saddle River, New Jersey.
42. Chapman, C. and Pinfold, M., 1999, "Design Engineering - A Need to Rethink the Solution Using Knowledge-based Engineering, Knowledge Based Systems, 12(5-6), pp. 257-267.
43. Larsson, T., Larsson, A. and Karlsson, L., 2001, "A Modular Approach to Web-based Multibody Dynamic Simulation," CIRP, 6-8 June 2001, Stockholm, Sweden.
44. Campbell, R. I., De Beer, D. J., Barnard, L. J., Booysen, G. J., Truscott, M., Cain, R., Burton, M.J., Gyi, D.E. and Hague, R., 2007, "Design Evolution Through Customer Interaction with Functional Prototypes," Journal of Engineering Design, 18(6), pp. 617-635.
45. Schmitt, R. and Hatfield, S., 2008, "Strategic Servicification - A Quality-based Approach Beyond Serviceengineering, in: M. Mitsuishi, K. Ueda, and F. Kimura, eds., Manufacturing Systems and Technologies for the New Frontier, 41st CIRP Conference on Manufacturing Systems, 26-28 May 2008, Tokyo, London: Springer-Verlag, pp. 511-514.
46. Grönroos, C., 2000, "Service Management and Marketing: A Customer Relationship Management Approach, Wiley, Chichester.
47. Fransson, M., 2004, "Verkstadsindustrins Tjänstefiering - en explorativ resa i det nya affärslandskapet (in Swedish)," Licentiate thesis. CTF, Karlstads Universitet, Sweden, No. 2004:24.
48. Fritz, C., Grossman, J., Schendel, C., Boman, M., and Sakao, T., 2007, "Research Tasks and Potentials In Product-Service-System Development," Proc. 16th International Conference on Engineering Design, ICED07, 28-21 August 2007, Paris, pp. 401-402
49. WBCSD (World Business Council for Sustainable Development), 2004, "Running the Risk. Risk and Sustainable Development: a Business Perspective," Atar Roto Presse SA, Switzerland.
50. Gaziulusoy, A., Boyle, C. and McDowall, R., 2012, "System Innovation for Sustainability: A Systemic Double-flow Scenario Method for Companies," Journal of Cleaner Production, in press.
51. Figge, F. and Hahn, T., 2004, "Sustainable Value Added-Measuring Corporate Contributions to Sustainability Beyond Eco-efficiency," Ecological Economics, 48(2), pp. 173-187.
52. ADVANCE-project, 2006, "Sustainable Value of European Industry: A Value-based Analysis of Environmental Performance of European Manufacturing Companies," Final report of the ADVANCE-project, www.advance-project.org/.
53. Kuosmanen, T., and Kuosmanen, N., 2009, "How not to Measure Sustainable Value (and How One Might)," Ecological Economics, 69(2), pp. 235-243.
54. Ang, F., and Van Passel, S., 2010, "The Sustainable Value Approach: A Clarifying and Constructive Comment," Ecological Economics, 69(12), pp. 2303-2306.
55. Figge, F., and Hahn, T., 2009, "Not Measuring Sustainable Value at All: A Response to Kuosmanen and Kuosmanen," Ecological Economics, 69(2), pp. 244-249.
56. Collopy, P. and Hollingsworth, P., 2009, "Value Driven Design," Proc. 9th AIAA Aviation Technology, Integration, and Operations Conference, Hilton Head, South Carolina, USA.
57. Collopy, P., 2007, "Adverse Impact of Extensive Attribute Requirements on the Design of Complex Systems," AIAA Aviation Technology, Integration, and Operations Conference, 2007-7820, Belfast, Northern Ireland.
58. Boart, P., Nergård, H., Sandberg, M. and Larsson, T., 2005, "A Multidisciplinary Design Tool with Downstream Processes Embedded for Conceptual Design and Evaluation," Proc. International Conference on Engineering Design, ICED'05, 15-18 August 2005, Melbourne.
59. Thor, P. and Isaksson, O., 2011, "Automated Design of Aero Engine Structural Components: A Modular Approach that Enables Re-use of Generative Engineering Methods," International Society for Airbreathing Engines, ISABE 2011, 12-16 September, Gothenburg, Sweden.
60. Bertoni, A., Isaksson, O., Bertoni, M. and Larsson, T., 2011, "Assessing the Value of Sub-System Technologies Including Life Cycle Alternatives," in Glocalized Solutions for Sustainability in Manufacturing, Proc. 18th CIRP International Conference on Life Cycle Engineering, Technische Universität Braunschweig, Braunschweig, Germany, 2-4 May 2011.
61. Bertoni, A., Bertoni, M. and Isaksson, O., 2011, "Communicating the Value of PSS Design Alternatives Using Color-coded CAD Models," in Functional Thinking for Value Creation, Proc. 3rd CIRP International Conference on Industrial Product Service Systems, Technische Universität Braunschweig, Braunschweig, Germany, 5-6 May 2011.
62. Bertoni, M., Bertoni, A. and Johansson, C., 2011, "Towards Assessing the Value of Aerospace Components: A Conceptual Scenario," Proc. 18th International Conference on Engineering Design (ICED11), 15-19 Aug. 2011, Copenhagen, Denmark.
63. Bertoni, M., Eres, H. and Isaksson, O., 2011, "Criteria for Assessing the Value of Product-Service System Design Alternatives: An Aerospace Investigation," in Functional Thinking for Value Creation; Proc. 3rd CIRP International Conference on Industrial Product Service Systems, Technische Universität Braunschweig, Braunschweig, Germany, 5-6 May 2011.