Magnesium alloys as a biomaterial for degradable craniofacial screws

Acta Biomaterialia

Volumn 10, Issue 5, 2014, Pages 2323-2332

  Henderson, Sarah E ^a   Verdelis, Konstantinos ^b   Maiti, Spandan ^a   Pal, Siladitya ^a   Chung, William L ^b   Chou, Da Tren ^a   Kumta, Prashant N ^a,b   Almarza, Alejandro J ^a,b  

^a PA 15260   (United States)

^b UNIVERSITY OF PITTSBURGH   (United States)

Author keywords

Biodegradable metal; Craniofacial implants; Finite element modeling; Magnesium

Indexed keywords

BIOMATERIALS; BONE; COMPUTERIZED TOMOGRAPHY; DEGRADATION; MAGNESIUM ALLOYS; SCREWS; STAINLESS STEEL;

AZ31; BIODEGRADABLE METALS; BONE REMODELLING; BONE SCREW; CRANIOFACIAL; CRANIOFACIAL IMPLANT; DEGRADATION PROFILES; PULL-OUT TEST; PURE MAGNESIUM; STAINLESS STEEL SCREWS;

FINITE ELEMENT METHOD;

ALLOY; BIOMATERIAL; MAGNESIUM; MAGNESIUM ALLOY; STAINLESS STEEL; UNCLASSIFIED DRUG; MG-AL-ZN ALLOY;

ARTICLE; BONE GROWTH; BONE MARROW; BONE REMODELING; BONE SCREW; CONTROLLED STUDY; CORTICAL BONE; CRANIOFACIAL SURGERY; DEGRADATION; FINITE ELEMENT ANALYSIS; HISTOLOGY; IMPLANTATION; IN VITRO STUDY; IN VIVO STUDY; MANDIBLE; MICRO-COMPUTED TOMOGRAPHY; NONHUMAN; OSTEOTOMY; PRIORITY JOURNAL; RABBIT; ANIMAL; BIODEGRADABLE IMPLANT; COMPUTER SIMULATION; DRUG EFFECTS; FACE; FEMALE; IMAGE PROCESSING; MATERIALS TESTING; RADIOGRAPHY; SKULL;

ORYCTOLAGUS CUNICULUS;

ABSORBABLE IMPLANTS; ALLOYS; ANIMALS; BIOCOMPATIBLE MATERIALS; BONE SCREWS; COMPUTER SIMULATION; FACE; FEMALE; FINITE ELEMENT ANALYSIS; IMAGE PROCESSING, COMPUTER-ASSISTED; MAGNESIUM; MATERIALS TESTING; RABBITS; SKULL; X-RAY MICROTOMOGRAPHY;

EID: 84898056581     PISSN: 17427061     EISSN: 18787568     Source Type: Journal    
DOI: 10.1016/j.actbio.2013.12.040     Document Type: Article

References (40)

1. A. Bondarenko, M. Hewicker-Trautwein, N. Erdmann, N. Angrisani, J. Reifenrath, and A. Meyer-Lindenberg Comparison of morphological changes in efferent lymph nodes after implantation of resorbable and non-resorbable implants in rabbits BioMed Eng Online 10 2011 32
2. O. Duygulu, R. Alper Kaya, G. Oktay, and A. Arslan Kaya Investigation on the potential of magnesium alloy AZ31 as a bone implant Mater Sci Forum 546-549 2007 421 424
3. N. Erdmann, N. Angrisani, J. Reifenrath, A. Lucas, F. Thorey, and D. Bormann et al. Biomechanical testing and degradation analysis of MgCa0.8 alloy screws: a comparative in vivo study in rabbits Acta Biomater 7 2011 1421 1428
4. N. Erdmann, A. Bondarenko, M. Hewicker-Trautwein, N. Angrisani, J. Reifenrath, and A. Lucas et al. Evaluation of the soft tissue biocompatibility of MgCa0.8 and surgical steel 316L in vivo: a comparative study in rabbits BioMed Eng Online 9 2010 63
5. C. Hampp, B. Ullmann, J. Reifenrath, N. Angrisani, D. Dziuba, and D. Bormann et al. Research on the biocompatibility of the new magnesium alloy LANd442 - an in vivo study in the rabbit tibia over 26 weeks Adv Eng Mater 14 2012 B28 B37
6. C. Hampp, N. Angrisani, J. Reifenrath, D. Bormann, J.M. Seitz, and A. Meyer-Lindenberg Evaluation of the biocompatibility of two magnesium alloys as degradable implant materials in comparison to titanium as non-resorbable material in the rabbit Mater Sci Eng C 33 2013 317 326
7. T.A. Huehnerschulte, J. Reifenrath, B. von Rechenberg, D. Dziuba, J.M. Seitz, and D. Bormann et al. In vivo assessment of the host reactions to the biodegradation of the two novel magnesium alloys ZEK100 and AX30 in an animal model BioMed Eng Online 11 2012 14
8. C. Janning, E. Willbold, C. Vogt, J. Nellesen, A. Meyer-Lindenberg, and H. Windhagen et al. Magnesium hydroxide temporarily enhancing osteoblast activity and decreasing the osteoclast number in peri-implant bone remodelling Acta Biomater 6 2010 1861 1868
9. S.-M. Kim, J.-H. Jo, S.-M. Lee, M.-H. Kang, H.-E. Kim, and Y. Estrin et al. Hydroxyapatite-coated magnesium implants with improved in vitro and in vivo biocorrosion, biocompatibility, and bone response J Biomed Mater Res Part A 102 2014 429 441
10. A. Krause, N. Von Der Höh, D. Bormann, C. Krause, F.W. Bach, and H. Windhagen et al. Degradation behaviour and mechanical properties of magnesium implants in rabbit tibiae J Mater Sci 45 2010 624 632
11. Z. Li, X. Gu, S. Lou, and Y. Zheng The development of binary Mg-Ca alloys for use as biodegradable materials within bone Biomaterials 29 2008 1329 1344
12. A. Meyer-Lindenberg, M. Thomann, A. Krause, D. Bormann, B. Von Rechenberg, and H. Windhagen Investigation on the use of a magnesium alloy as a new resorbable implant material for orthopaedic surgery Kleintierpraxis 55 2010 349 363
13. M. Thomann, C. Krause, D. Bormann, N. Von Der Höh, H. Windhagen, and A. Meyer-Lindenberg Comparison of the resorbable magnesium alloys LAE442 und MgCa0.8 concerning their mechanical properties, their progress of degradation and the bone-implant-contact after 12 months implantation duration in a rabbit model Materialwiss Werkstofftech 40 2009 82 87
14. M. Thomann, C. Krause, N. Angrisani, D. Bormann, T. Hassel, and H. Windhagen et al. Influence of a magnesium-fluoride coating of magnesium-based implants (MgCa0.8) on degradation in a rabbit model J Biomed Mater Res - Part A 93 2010 1609 1619
15. N. Von Der Höh, A. Krause, C. Hackenbroich, D. Bormann, A. Lucas, and A. Meyer-Lindenberg Influence of different surface machining treatments of resorbable implants of different magnesium alloys - a primary study in rabbits Deutsche Tierarzt Wochenschr 113 2006 439 446
16. N. Von Der Höh, D. Bormann, A. Lucas, B. Denkena, C. Hackenbroich, and A. Meyer-Lindenberg Influence of different surface machining treatments of magnesium-based resorbable implants on the degradation behavior in rabbits Adv Eng Mater 11 2009 B47 B54
17. N. Von Der Höh, B. Von Rechenberg, D. Bormann, A. Lucas, and A. Meyer-Lindenberg Influence of different surface machining treatments of resorbable magnesium alloy implants on degradation - EDX-analysis and histology results Materialwiss Werkstofftech 40 2009 88 93
18. N. Von Der Höh, D. Bormann, A. Lucas, F. Thorey, and A. Meyer-Lindenberg Comparison of the in vivo degradation progress of solid magnesium alloy cylinders and screw-shaped magnesium alloy cylinders in a rabbit model Mater Sci Forum 638-642 2010 742 747
19. E. Willbold, A.A. Kaya, R.A. Kaya, F. Beckmann, and F. Witte Corrosion of magnesium alloy AZ31 screws is dependent on the implantation site Mater Sci Eng B 176 2011 1835 1840
20. E. Willbold, K. Kalla, I. Bartsch, K. Bobe, M. Brauneis, and S. Remennik et al. Biocompatibility of rapidly solidified magnesium alloy RS66 as a temporary biodegradable metal Acta Biomater 9 2013 8509 8517
21. F. Witte, V. Kaese, H. Haferkamp, E. Switzer, A. Meyer-Lindenberg, and C.J. Wirth et al. In vivo corrosion of four magnesium alloys and the associated bone response Biomaterials 26 2005 3557 3563
22. F. Witte, J. Fischer, J. Nellesen, H.-A. Crostack, V. Kaese, and A. Pisch et al. In vitro and in vivo corrosion measurements of magnesium alloys Biomaterials 27 2006 1013 1018
23. F. Witte, H. Ulrich, C. Palm, and E. Willbold Biodegradable magnesium scaffolds: part II: peri-implant bone remodeling J Biomed Mater Res - Part A 81 2007 757 765
24. F. Witte, H. Ulrich, M. Rudert, and E. Willbold Biodegradable magnesium scaffolds: part I: appropriate inflammatory response J Biomed Mater Res - Part A 81 2007 748 756
25. F. Witte, J. Fischer, J. Nellesen, C. Vogt, J. Vogt, and T. Donath et al. In vivo corrosion and corrosion protection of magnesium alloy LAE442 Acta Biomater 6 2010 1792 1799
26. L. Xu, G. Yu, E. Zhang, F. Pan, and K. Yang In vivo corrosion behavior of Mg-Mn-Zn alloy for bone implant application J Biomed Mater Res - Part A 83 2007 703 711
27. L. Xu, F. Pan, G. Yu, L. Yang, E. Zhang, and K. Yang In vitro and in vivo evaluation of the surface bioactivity of a calcium phosphate coated magnesium alloy Biomaterials 30 2009 1512 1523
28. J.X. Yang, F.Z. Cui, I.S. Lee, Y. Zhang, Q.S. Yin, and H. Xia et al. In vivo biocompatibility and degradation behavior of Mg alloy coated by calcium phosphate in a rabbit model J Biomater Appl 27 2012 153 164
29. E. Zhang, L. Xu, G. Yu, F. Pan, and K. Yang In vivo evaluation of biodegradable magnesium alloy bone implant in the first 6 months implantation J Biomed Mater Res. Part A 90A 2009 882 893
30. S. Zhang, X. Zhang, C. Zhao, J. Li, Y. Song, and C. Xie et al. Research on an Mg-Zn alloy as a degradable biomaterial Acta Biomater 6 2010 626 640
31. T.A. Turvey, W.P. Proffit, and C. Phillips Biodegradable fixation for craniomaxillofacial surgery: a 10-year experience involving 761 operations and 745 patients Int J Oral Maxillofac Surg 40 2011 244 249
32. D. Meslemani, and R.M. Kellman Recent advances in fixation of the craniomaxillofacial skeleton Curr Opin Otolaryngol Head Neck Surg 20 2012 304 309
33. R. Suuronen, T. Pohjonen, L. Tech, J. Vasenius, and S. Vainionpaa Comparison of absorbable self-reinforced multilayer poly-l-lactide and metallic plates for the fixation of mandibular body osteotomies: an experimental study in sheep J Oral Maxillofac Surg 50 1992 255 262
34. R.B. Bell, and C.S. Kindsfater The use of biodegradable plates and screws to stabilize facial fractures J Oral Maxillofac Surg 64 2006 31 39
35. H. Waizy, A. Weizbauer, M. Maibaum, F. Witte, H. Windhagen, and A. Lucas Biomechanical characterisation of a degradable magnesium-based (MgCa0.8) screw J Mater Sci: Mater Med 23 2012 649 655
36. B. Denkena, C. Podolsky, A. Lucas, T. Hassel, F. Witte, and O. Palm Processing of degradable surgical implants made of magnesium alloys Biomaterialien 6 2005 171
37. Denkena B, Witte F, Podolsky C, Lucas A. Degradable implants made of magnesium alloys. Proceedings of the 5th Euspen international conference. Montpellier, France 2005.
38. F. Witte, C. Podolsky, T. Hassel, and A. Lucas Fertigung von magnesium-implantaten Werkstattstechnik 94 2004 692 696
39. T. van den Bos, D. Speijer, R.A. Bank, D. Brömme, and V. Everts Differences in matrix composition between calvaria and long bone in mice suggest differences in biomechanical properties and resorption: special emphasis on collagen Bone 43 2008 459 468
40. C.C.H. Poon, and S. Verco Evaluation of fracture healing and subimplant bone response following fixation with a locking miniplate and screw system for mandibular angle fractures in a sheep model Int J Oral Maxillofac Surg 42 2013 736 745