Preparation of ion-exchange materials and membranes

Desalination

Volumn 342, Issue , 2014, Pages 156-174

  Vogel, Claus ^a   Meier Haack, Jochen ^a  

^a LEIBNIZ INSTITUTE OF POLYMER RESEARCH DRESDEN   (Germany)

Author keywords

Ammonium groups; Ion exchange materials; Phosphonated polymers; Phosphonium groups; Sulfonated polymers

Indexed keywords

CHEMICAL INDUSTRY; DESALINATION; WATER FILTRATION;

AMMONIUM GROUPS; CATION EXCHANGES; CHEMICAL PROCESS INDUSTRY; ION-EXCHANGE MATERIALS; PHARMACEUTICAL INDUSTRY; PHOSPHONIUM GROUPS; SELECTIVE TRANSPORT; SULFONATED POLYMERS;

POLYMERS;

AMMONIUM; DESALINATION; ION EXCHANGE; MEMBRANE; POLYMER; BRACKISH WATER; CHEMICAL INDUSTRY; ELECTROKINESIS; FOOD INDUSTRY; INDUSTRIAL WASTE; PHARMACEUTICAL INDUSTRY; WASTEWATER;

EID: 84897964924     PISSN: 00119164     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.desal.2013.12.039     Document Type: Article

References (245)

1. Xu T. Ion exchange membranes: state of their development and perspective. J. Membr. Sci. 2005, 263:1-29.
2. Nagarale R.K., Gohil G.S., Shahi V.K. Recent developments on ion-exchange membranes and electro-membrane processes. Adv. Colloid Interface Sci. 2006, 119:97-130.
3. Güler E., Elizen R., Vermaas D.A., Saakes M., Nijmeijer K. Performance-determining membrane properties in reverse electrodialysis. J. Membr. Sci. 2013, 446:266-276.
4. Strathmann H. Electrodialysis and related processes. Membrane Separations Technology Principles and Applications 1995, Elsevier, Amsterdam. R.D. Noble, S.A. Stern (Eds.).
5. Couture G., Alaaeddine A., Boschet F., Ameduri B. Polymeric materials as anion-exchange membranes for alkaline fuel cells. Prog. Polym. Sci. 2011, 36:1521-1557.
6. Park C.H., Lee C.H., Guiver M.D., Lee Y.M. Sulfonated hydrocarbon membranes for medium-temperature and low-humidity proton exchange membrane fuel cells (PEMFCs). Prog. Polym. Sci. 2011, 36:1443-1498.
7. Bose S., Kuila T., Nguyen T.X.H., Kim N.H., Lau K., Lee J.H. Polymer membranes for high temperature proton exchange membrane fuel cell: recent advances and challenges. Prog. Polym. Sci. 2011, 36:813-843.
8. Maier G., Meier-Haack J. Sulfonated aromatic polymers for fuel cell membranes. Adv. Polym. Sci. 2008, 216:1-62.
9. Nasef M.M., Güvenc O. Radiation-grafted copolymers for separation and purification purposes: status, challenges and future directions. Prog. Polym. Sci. 2012, 37:1597-1656.
10. Yu J., Yi B., Xing D., Liu F., Shao Z., Fu Y., Zhang H. Degradation mechanism of polystyrene sulfonic acid membrane and application of its composite membranes in fuel cells. Phys. Chem. Chem. Phys. 2003, 5:611-615.
11. Stone C., Steck A.E., Wei J. Trifluorostyrene and substituted trifluorostyrene copolymeric compositions and ion-exchange membranes formed therefrom. US 5,422,411 1995.
12. Hodgdon R.B. Polyelectrolytes prepared from perfluoroalkylaryl macromolecules. J. Polym. Sci., Part A1 1968, 6:171-191.
13. Wieser C. Novel polymer electrolyte membranes for automotive applications - requirements and benefits. Fuel Cells 2004, 4:245-250.
14. Kreuer K.D., Schuster M., Obliers B., Diat O., Traub U., Fuchs A., Klock U., Paddison S.J., Maier J. Short-side-chain proton conducting perfluorosulfonic acid ionomers: why they perform better in PEM fuel cells. J. Power Sources 2008, 178:499-509.
15. Polymer Membranes for Fuel Cells 2009, Springer. S.M.J. Zaidi, T. Matsuura (Eds.).
16. Solid State Proton Conductors: Properties and Applications in Fuel Cells 2012, Wiley, Chichester. M.L. Di Vona, P. Knauth (Eds.).
17. Handbook of Fuel Cells: Fundamentals Technology and Applications, Volume 1: Fundamentals and Survey of Systems 2004, Wiley, Chichester. W. Vielstich, A. Lamm, H.A. Gasteiger (Eds.).
18. Adv. Polym. Sci. Part I and II 2008, Springer-Verlag, Berlin Heidelberg. G. Scherer (Ed.).
19. Asquith B.M., Meier-Haack J., Vogel C., Butwilowski W., Ladewig B.P. Side-chain sulfonated copolymer cation exchange membranes for electro-driven desalination applications. Desalination 2013, 324:93-98.
20. Kang M., Choi Y., Choi I., Yoon T., Moon S. Electrochemical characterization of sulfonated poly(arylene ether sulfone) (S-PES) cation-exchange membranes. J. Membr. Sci. 2003, 216:39-53.
21. Yamabe M., Akiyama K., Akatsuka Y., Kato M. Novel phosphonated perfluorocarbon polymers. Eur. Polym. J. 2000, 36:1035-1041.
22. Kreuer K., Paddison S.J., Spohr E., Schuster M. Transport in proton conductors for fuel-cell applications: simulations, elementary reactions, and phenomenology. Chem. Rev. 2004, 104:4637-4678.
23. Vogel C., Komber H., Quetschke A., Butwilowski W., Pötschke A., Schlenstedt K., Meier-Haack J. Side-chain sulfonated random and multiblock poly(ether sulfone)s for PEM aplications. React. Funct. Polym. 2011, 71:824-842.
24. Liu B., Robertson G.P., Kim D., Sun X., Jiang Z., Guiver M.D. Enhanced thermo-oxidative stability of sulfophenylated poly(ether sulfone)s. Polymer 2010, 51:403-413.
25. Matsumoto K., Higashihara T., Ueda M. Locally and densely sulfonated poly(ether sulfone)s as proton exchange membrane. Macromolecules 2009, 42:1161-1166.
26. Matsumoto K., Higashihara T., Ueda M. Locally sulfonated poly(ether sulfone)s with highly sulfonated units as proton exchange membranes. J. Polym. Sci., Part A: Polym. Chem 2009, 47:3444-3453.
27. Abouzari-Lotf E., Ghassemi H., Shockravi A., Zawodzinski T., Schiraldi D. Phosphonated poly(arylene ether)s as potential high temperature proton conducting materials. Polymer 2011, 52:4709-4717.
28. Lee H., Roy A., Lane O., Lee M., McGrath J.E. Synthesis and characterization of multiblock copolymers based on hydrophilic disulfonated poly(arylene ether sulfone) and hydrophobic partially fluorinated poly(arylene ether ketone). J. Polym. Sci., Part A: Polym. Chem. 2010, 48:214-222.
29. Schönberger F., Chromnik A., Kerres J. Partially fluorinated poly(arylene ether)s: investigation of the dependence of monomeric structures on polymerisability and degradation during sulfonation. Polymer 2010, 51:4299-4313.
30. Zhang C., Kang S., Ma X., Xiao G., Yan D. Synthesis and characterization of sulfonated poly(arylene ether phosphine oxide)s with fluorenyl groups by direct polymerization for proton exchange membranes. J. Membr. Sci. 2009, 329:99-105.
31. Tian S.H., Shu D., Wang S.J., Xiao M., Meng Y.Z. Sulfonated poly(fluorenyl ether ketone nitrile) electrolyte membrane with high proton conductivity and low water uptake. J. Power Sources 2010, 195:97-103.
32. Zhang Y., Wan Y., Zhao C., Shao K., Zhang G., Li H., Lin H., Na H. Novel side-chain-type poly(arylene ether ketone) with pendant sulfoalkyl groups for direct methanol fuel cells. Polymer 2009, 50:4471-4478.
33. Ye G., Mills C.M., Goward G.R. Influences of casting solvents on proton dynamics within sulfonated polyether ether ketones (S-PEEKs) studied by using high-resolution solid-state NMR. J. Membr. Sci. 2008, 319:238-243.
34. Kumar A., Pisula W., Markova D., Klapper M., Müllen K. Proton-conducting poly(phenylene oxide)-poly(vinyl benzyl phosphonic acid) block copolymers via atom transfer radical polymerization. Macromol. Chem. Phys. 2012, 213:489-499.
35. Li C., Liu J., Guan R., Zhang P., Zhang Q. Effect of heating and stretching membrane on ionic conductivity of sulfonated poly(phenylene oxide). J. Membr. Sci. 2007, 287:180-186.
36. Rager T., Schuster M., Steiniger H., Kreuer K. Poly(1,3-phenylene-5-phosphonic acid), a fully aromatic polyelectrolyte with high ion exchange capacity. Adv. Mater. 2007, 19:3317-3321.
37. Li N., Liu J., Cui Z., Zhang S., Xing W. Novel hydrophilic-hydrophobic multiblock copolyimides as proton exchange membranes: enhancing the proton conductivity. Polymer 2009, 50:4505-4511.
38. Hu Z., Yin Y., Okamoto K., Moriyama Y., Morikawa A. Synthesis and charaterization of sulfonated polyimides derived from 2,2-bis(4-sulfophenyl)-4,4-oxydinaniline as polymer electrolyte membranes for fuel cell applications. J. Membr. Sci. 2009, 329:146-152.
39. Çakir M., Karataş S., Menceloǧlu Y., Kayaman-Apohan N., Güngör A. Phosphorus-containing sulfonated polyimides for proton exchange membranes. Macromol. Chem. Phys. 2008, 209:919-929.
40. Taeger A., Vogel C., Lehmann D., Jehnichen D., Komber H., Meier-Haack J., Ochoa N.A., Nunes S.P., Peinemann K. Ion exchange membranes derived from sulfonated polyaramides. React. Funct. Polym. 2003, 57:77-92.
41. Berber M.R., Fujigaya T., Sasaki K., Nakashima N. Remarkably durable high temperature polymer electrolyte fuel cell based on poly(vinylphosphonic acid)-doped polybenzimidazole. Sci. Rep. 2013, 3. (7 pp.).
42. 4-doped PBI-based high temperature PEMFC. J. Membr. Sci. 2007, 306:47-55.
43. Lin H., Hu C., Lai S., Yu L.T. Polybenzimidazole and butylsulfonate grafted polybenzimidazole blends for proton exchange membrane fuel cells. J. Membr. Sci. 2012, 389:399-406.
44. Guan Y., Pu H., Jin M., Chang Z., Modestov A.D. Proton conducting membranes based on poly(2,2'-imidazole-5,5'-bibenzimid-azole). Fuel Cells 2012, 12:124-131.
45. Xia Z., Yuan S., Jiang G., Guo X., Fang J., Liu L., Qiao J., Yin J. Polybenzimidazoles with pendant quaternary ammonium groups as potential anion exchange membranes for fuel cells. J. Membr. Sci. 2012, 390-391:152-159.
46. Li Q., Jensen J.O., Savinell R.F., Bjerrum N.J. High temperature proton exchange membranes based on polybenzimidazoles for fuel cells. Prog. Polym. Sci. 2009, 34:449-477.
47. Quian G., Benicewicz B.C. Synthesis and characterization of high molecular weight hexafluoroisopropylidene-containing polybenzimidazole for high-temperature polymer electrolyte membrane fuel cells. J. Polym. Sci., Part A: Polym. Chem. 2009, 47:4064-4407.
48. Bai Z., Williams L.D., Durstock M.F., Dang T.D. Properties and proton conductivities of highly sulfonated polyarylenethioethersulfones for fuel cells. Polym. Prepr. 2004, 45:60-61.
49. Bai Z., Dang T.D. Direct synthesis of fully aromatic sulfonated polyarylenethioether sulfones as proton-conducting polymers for fuel cells. Macromol. Rapid Commun. 2006, 27:1271-1277.
50. Shen L., Xiao G., Yan D., Sun G. Sulfonated poly(arylene thioether ketone ketone sulfone)s for proton exchange membranes with high oxidative stability. e-Polymers 2005, 31:1-10.
51. Bai Z., Houtz M.D., Mirau P.A., Dang T.D. Structures and properties of highly sulfonated poly(arylenethioethersulfone)s as proton exchange membranes. Polymer 2007, 48:6598-6604.
52. Bai Z., Price G.E., Yoonessi M., Juhl S.B., Durstock M.F., Dang T.D. Proton exchange membranes based on sulfonated polyarylenethioethersulfone and sulfonated polybenzimidazole for fuel cell applications. J. Membr. Sci. 2007, 305:69-76.
53. Lee K.K., Kerres J. Synthesis and characterization of sulfonated poly(arylene thioether)s and their blends with polybenzimidazole for proton exchange membranes. J. Membr. Sci. 2007, 294:75-83.
54. Ma X., Shen L., Zhang C., Xiao G., Yan D., Sun G. Sulfonated poly(arylene thioether phosphine oxide)s copolymers for proton exchange membrane fuel cells. J. Membr. Sci. 2008, 310:303-311.
55. Bai Z., Shumaker J.A., Houtz M.D., Mirau P.A., Dang T.D. Fluorinated poly(arylene thioether sulfone) copolymers containing pendant sulfonic acid groups for proton exchange membranes materials. Polymer 2009, 50:1463-1469.
56. Bai Z., Yoonessi M., Juhl S.B., Drummy L.F., Durstock M.F., Dang T.D. Synthesis and characterization of multiblock sulfonated poly(arylene thioether sulfone) copolymers for proton exchange membranes. Macromolecules 2008, 41:9483-9486.
57. Kim Y.S., Sumner M.J., Harrison W.L., Riffle J.S., McGrath J.E., Pivovar B.S. Direct methanol fuel cell performance of disulfonated poly(arylene ether benzonitrile) copolymers. J. Electrochem. Soc. 2004, 151:A2150-A2156.
58. Gao Y., Robertson G.P., Guiver M.D., Mikhailenko D., Li X., Kaliaguine S. Low-swelling proton-conducting copoly(aryl ether nitrile)s containing naphthalene structure with sulfonic acid groups meta to the ether linkage. Polymer 2006, 47:808-816.
59. Sakaguchi Y., Kaji A., Nagahara S., Kitamura K., Takase S., Omote K., Asako Y., Kimura K. Sulfonation of fluorine-containing poly(ether ketone)s and poly(ether nitrile)s for proton-conducting membranes. Polym. Prepr. 2004, 45:20-21.
60. 2/air fuel cells: synthesis and characterization of partially fluorinated disulfonated poly(arylene ether benzonitrile) copolymers. J. Membr. Sci. 2007, 299:8-18.
61. Kim D.S., Kim Y.S., Guiver M.D., Pivovar B.S. High performance nitrile copolymers for polymer electrolyte membrane fuel cells. J. Membr. Sci. 2008, 321:199-2008.
62. Schuster M., de Araujo C.C., Atanasov V., Andersen H.T., Kreuer K., Maier J. Highly sulfonated poly(phenylene sulfone): preparation and stability issues. Macromolecules 2009, 42:3129-3137.
63. de Araujo C.C., Kreuer K.D., Schuster M., Portale G., Mendil-Jakani H., Gebel G., Maier J. Poly(p-phenylene sulfone)s with high ion exchange capacities: ionomers with unique microstructural and transport features. Phys. Chem. Chem. Phys. 2009, 11:3305-3312.
64. Titvinidze G., Kreuer K., Schuster M., de Araujo C.C., Melchior J.P., Meyer W.H. Proton conducting phase-separated multiblock copolymers with sulfonated poly(phenylene sulfone) blocks for electrochemical applications: preparation, morphology, hydration behavior, and transport. Adv. Funct. Mater. 2012, 22:4456-4470.
65. Vogel C., Meier-Haack J., Taeger A., Lehmann D. On the stability of selected monomeric and polymeric aryl sulfonic acids upon heating in water. Part 1. Fuel Cells 2004, 4:320-327.
66. Kim D.S., Kim Y.S., Guiver M.D., Ding J., Pivovar B.S. Highly fluorinated comb-shaped copolymer as proton exchange membranes (PEMs): fuel cell performance. J. Power Sources 2008, 182:100-105.
67. Liu B., Robertson G.P., Kim D., Guiver M.D., Hu W., Jiang Z. Aromatic poly(ether ketone)s with pendant sulfonic acid phenyl groups prepared by a mild sulfonation method for proton exchange membranes. Macromolecules 2007, 40:1934-1944.
68. Taeger A., Vogel C., Lehmann D., Lenk W., Schlenstedt K., Meier-Haack J. Sulfonated multiblock copoly(ether sulfone)s as membrane materials for fuel cell applications. Macromol. Symp. 2004, 210:175-184.
69. Schuster M., Kreuer K., Andersen H.T., Maier J. Sulfonated poly(phenylen sulfone) polymers as hydrolytically and thermooxidative stable proton conducting ionomers. Macromolecules 2007, 40:598-607.
70. Lee H.-S., Roy A., Lane O., Dunn S., McGrath J.E. Hydrophilic-hydrophobic multiblock copolymers based on poly(arylene ether sulfone) via low-temperature coupling reactions for proton exchange membrane fuel cells. Polymer 2008, 40:715-723.
71. Schönberger F., Kerres J. Novel Multiblock-co-Ionomers as Potential Polymer Electrolyte Membrane Materials. J. Polym. Sci., Part A: Polym. Chem. 2007, 45:5237-5255.
72. Lee C.H., Park H.B., Park C.H., Lee S.Y., Kim J.Y., McGrath J.E., Lee Y.M. Preparation of high-performance polymer electrolyte nanocomposites through nanoscale silica particle dispersion. J. Power Sources 2010, 195:1325-1332.
73. Tian S., Meng Y., Hay A.S. Membranes from poly(aryl ether)-based ionomers containing multiblock segments of randomly distributed nanoclusters of 18 sulfonic acid groups. J. Polym. Sci., Part A: Polym. Chem. 2009, 47:4762-4773.
74. Tian S., Meng Y., Hay A.S. Membranes from poly(aryl ether)-based ionomers containing randomly distributed nanoclusters of 6 or 12 sulfonic acid groups. Macromolecules 2009, 42:1153-1160.
75. Matsumura S., Hlil A.A., Al-Souz M.A.K., Gaudet J., Guay D., Hay A.S. Ionomers for proton exchange membrane fuel cells by sulfonation of novel dendritic multiblock copoly(ether-sulfone)s. J. Polym. Sci. A Polym. Chem. 2009, 47:5461-5473.
76. Matsumura S., Hlil A.R., Du N., Lepiller C., Gaudet J., Guay D., Shi Z., Holdcroft S., Hay A.S. Ionomers for proton exchange membrane fuel cells with sulfonic acid groups on the end-groups: novel branched poly(ether-ketone)s with 3,6-ditrityl-9H-carbazole end-groups. J. Polym. Sci. A Polym. Chem. 2008, 46:3860-3868.
77. Matsumura S., Hlil A.R., Lepiller C., Gaudet J., Guay D., Hay A.S. Ionomers for proton exchange membrane fuel cells with sulfonic acid groups on the end groups: novel linear aromatic poly(sulfide-ketone)s. Macromolecules 2008, 41:277-280.
78. Matsumura S., Hlil A.R., Lepiller C., Gaudet J., Guay D., Shi Z., Holdcroft S., Hay A.S. Ionomers for proton exchange membrane fuel cells with sulfonic acid groups on the end groups: novel branched poly(ether-ketone)s. Macromolecules 2008, 41:281-284.
79. Higashihara T., Matsumoto K., Ueda M. Sulfonated aromatic hydrocarbon polymers as proton exchange membranes for fuel cells. Polymer 2009, 50:5341-5357.
80. Chen Y., Rowlett J.R., Lee C.H., Lane O.R., VanHouten D.J., Zhang M., Moore R.B., McGrath J.E. Synthesis and characterization of multiblock partially fluorinated hydrophobic poly(arylene ether sulfone)-hydrophilic disulfonated poly(arylene ether sulfone) copolymers for proton exchange membranes. J. Polym. Sci., Part A: Polym. Chem. 2013, 51:2301-2310.
81. Blanco J.F., Nguyen Q.T., Schaetzel P. Sulfonation of polysulfones: suitability of the sulfonated materials for asymmetric membrane preparation. J. Appl. Polym. Sci. 2002, 84:2461-2473.
82. Ghassemi H., Ndip G., McGrath J.E. New multiblock copolymers of sulfonated poly(4'-phenyl-2,5-benzophenone) and poly(arylene ether sulfone) for proton exchange membranes, II. Polymer 2004, 45:5855-5862.
83. Li L., Wang Y. Sulfonated polyethersulfone cardo membranes for direct methanol fuel cell. J. Membr. Sci. 2005, 246:167-172.
84. Hajatdoost S., Yarwood J. ATR-FTIR spectroscopic studies of the structure and permeability of sulfonated poly(ether sulfone) membranes. Part 3. Effects of sorption and desorption, and of annealing. J. Chem. Soc. Faraday Trans. 1997, 93:1613-1620.
85. Al-Omran A., Rose J.B. Synthesis and sulfonation of poly(phenylene ether ether sulfone)s containing methylated hydroquione residues. Polymer 1996, 37:1735-1743.
86. Meier-Haack J., Vogel C., Butwilowski W., Lehmann D. Sulfonated poly(ether sulfone)s for fuel cells by solvent-free polymerization. Pure Appl. Chem. 2007, 79:2083-2093.
87. Meier-Haack J., Komber H., Vogel C., Butwilowski W., Schlenstedt K., Lehmann D. Side-chain sulfonated poly(arylene ether)s for fuel cell applications. Macromol. Symp. 2007, 254:322-328.
88. Bishop M.T., Karasz F.E., Russo P.S., Langley K.H. Solubility and properties of a poly(aryl ether ketone) in strong acids. Macromolecules 1985, 18:86-93.
89. Deb P.C., Rajput L.D., Hande V.R., Sasane S., Kumar A. Modification of sulfonated poly(ether ether ketone) with phenolic resin. Polym. Adv. Technol. 2007, 18:419-426.
90. Kim I.C., Choi J.G., Tak T.M. Sulfonated polyethersulfone by heterogeneous method and its membrane performances. J. Appl. Polym. Sci. 1999, 74:2046-2055.
91. Manea C., Mulder M. Characterization of polymer blends of polyethersulfone/sulfonated polysulfone and polyethersulfone/sulfonated polyetheretherketone for direct methanol fuel cell application. J. Membr. Sci. 2002, 206:443-453.
92. 2 fuel cell. J. Power Sources 1998, 74:8-16.
93. Dyck A., Fritsch D., Nunes S.P. Proton-conductive membranes of sulfonated polyphenylsulfone. J. Appl. Polym. Sci. 2002, 86:2820-2827.
94. Genova-Dimitrova P., Baradie B., Foscallo D., Poinsignon C., Sanchez J.Y. Ionomeric membranes for proton exchange membrane fuel cell (PEMFC): sulfonated polysulfone associated with phosphatoantimonic acid. J. Membr. Sci. 2001, 185:59-71.
95. Lufrano F., Squadrito G., Patti A., Passalacqua E. Sulfonated polysulfone as promising membranes for polymer electrolyte fuel cells. J. Appl. Polym. Sci. 2000, 77:1250-1256.
96. Yang Y., Shi Z., Holdcroft S. Synthesis of sulfonated polysulfon-block-PVDF copolymers: enhancement of proton conductivity in low ion exchange capacity membranes. Macromolecules 2004, 37:1678-1681.
97. Park H.B., Shin H., Lee Y.M., Rhim J. Annealing effect of sulfonated polysulfone ionomer membranes on proton conductivity and methanol transport. J. Membr. Sci. 2005, 247:103-110.
98. Lafitte B., Karlsson L.E., Jannasch P. Sulfophenylation of polysulfones for proton-conducting fuel cell membranes. Macromol. Rapid Commun. 2002, 23:896-900.
99. Karlsson L.E., Jannasch P. Polysulfone ionomers for proton-conducting fuel cell membranes: sulfo-alkylated polysulfones. J. Membr. Sci. 2004, 230:61-70.
100. Jannasch P. Fuel cell membrane materials by chemical grafting of aromatic main-chain polymers. Fuel Cells 2005, 5:248-260.
101. Every H.A., Hickner M.A., McGrath J.E., Zawodzinski T.A. An NMR study of methanol diffusion in polymer electrolyte fuel cell membranes. J. Membr. Sci. 2005, 250:183-188.
102. Lafitte B., Jannasch P. Phosphonation of polysulfones via lithiation and reaction with chlorophosphonic acid esters. J. Polym. Sci., Part A: Polym. Chem. 2005, 43:273-286.
103. Lafitte B., Puchner M., Jannasch P. Proton conducting polysulfone ionomers carrying sulfoaryloxybenzoyl side chains. Macromol. Rapid Commun. 2005, 26:1464-1468.
104. Lafitte B., Jannasch P. Polysulfone ionomers functionalized with benzoyl(difluoromethylenephosphonic acid) side chains for proton-conducting fuel-cell membranes. J. Polym. Sci., Part A: Polym. Chem. 2007, 45:269-283.
105. Lafitte B., Jannasch P. Proton-conducting aromatic polymers carrying hypersulfonated side chains for fuel cell applications. Adv. Funct. Mater. 2007, 17:2823-2834.
106. Parvole J., Jannasch P. Polysulfones grafted with poly(vinylphosphonic acid) for highly proton conducting fuel cell membranes in the hydrated and nominally dry state. Macromolecules 2008, 41:3893-3903.
107. Kerres J., Zhang W., Cui W. New sulfonated engineering polymers via the metalation route. II. Sulfinated/sulfonated poly(ether sulfone) PSU Udel and its crosslinking. J. Polym. Sci., Part A: Polym. Chem. 1998, 36:1441-1448.
108. Kerres J., Cui W., Reichle S. New sulfonated engineering polymers via the metalation route. I. Sulfonated poly(ethersulfone) PSU Udel via metalation-sulfination-oxidation. J. Polym. Sci., Part A: Polym. Chem. 1996, 34:2421-2438.
109. Guiver M.D., Robertson G.P., Yoshikawa M., Tam C.M. Functionalized polysulfones: methods for chemical modification and membrane applications. ACS Symposium Series 744: Membrane Formation and Modification 2000, American Chemical Society, Washington, DC. I. Pinnau, B.D. Freeman (Eds.).
110. Bailly C., Williams D.J., Karasz F.E., MacKnight W.J. The sodium salts of sulphonated poly(aryl-ether-ether-ketone) (PEEK): preparation and characterization. Polymer 1987, 28:1009-1016.
111. Shibuya N., Porter R.S. Kinetics of PEEK sulfonation in concentrated sulfuric acid. Macromolecules 1992, 25:6495-6499.
112. Kim D.S., Robertson G.P., Kim Y.S., Guiver M.D. Copoly(arylene ether)s containing pendant sulfonic acid groups as proton exchange membranes. Macromolecules 2009, 42:957-963.
113. Chikashige Y., Chikyu Y., Miyatake K., Watanabe M. Poly(arylene ether) ionomers containing sulfofluorenyl groups for fuel cells. Macromolecules 2005, 38:7121-7126.
114. Chen Y., Meng Y., Wang S., Tian S., Chen Y., Hay A.S. Sulfonated poly(fluorenyl ether ketone) membrane prepared via direct polymerization for PEM fuel cell application. J. Membr. Sci. 2006, 280:433-441.
115. Liu B., Kim D., Murphy J., Robertson G.P., Guiver M.D., Mikhailenki S., Kaliaguine S., Sun Y., Liu Y., Lai J. Fluorenyl-containing sulfonated poly(aryl ether ether ketone ketone)s (SPFEEKK) for fuel cell applications. J. Membr. Sci. 2006, 280:54-64.
116. Zhang W., Gogel V., Friedrich A.K., Kerres J. Novel covalently cross-linked poly(ether ether ketone) ionomer membranes. J. Power Sources 2006, 155:3-12.
117. Ding F.C., Wang S.J., Xiao M., Li X.H., Meng Y.Z. Fabrication of crosslinked sulfonated fluorene-containing poly(arylene ether ketone) for proton exchange membrane. J. Power Sources 2007, 170:20-27.
118. Park H.B., Lee C.H.Lee, Sohn J.Y., Lee Y.M., Freeman B.D., Kim H.J. Effect of crosslinked chain length in sulfonated polyimide membranes on water sorption, proton conduction, and methanol permeation properties. J. Membr. Sci. 2006, 285:432-444.
119. Zhang C., Guo X., Fang J., Xu H., Yuan M., Chen B. A new and facile approach for the preparation of cross-linked sulfonated poly(sulfide sulfone) membranes for fuel cell application. J. Power Sources 2007, 170:42-45.
120. Mikhailenko S.D., Robertson G.P., Guiver M.D., Kaliaguine S. Properties of PEMs based on cross-linked sulfinated poly(ether ether ketone). J. Membr. Sci. 2006, 285:306-316.
121. Kerres J., Ullrich A., Meier F., Häring T. Synthesis and characterization of novel acid-base polymer blends for application in membrane fuel cells. Solid State Ionics 1999, 125:243-249.
122. Kerres J., Ullrich A., Häring T., Baldauf M., Gebhardt U., Preidel W. Preparation, characterization and fuel cell application of new acid-base blend membranes. J. New Mater. Electrochem. Syst. 2000, 3:229-239.
123. Kerres J.A. Blended and cross-linked ionomer membranes for application in membrane fuel cells. Fuel Cells 2005, 5:230-247.
124. Feng S., Shang Y., Wang S., Xie X., Wang Y., Wang Y., Xu J. Novel method for the preparation of ionically crosslinked sulfonated poly(arylene ether sulfone)/polybenzimidazole composite membranes via in situ polymerization. J. Membr. Sci. 2010, 346:105-112.
125. Roy A., Yu X., Dunn S., McGrath J.E. Influence of microstructure and chemical composition on proton exchange membrane properties of sulfonated-fluorinated, hydrophilic-hydrophobic multiblock copolymers. J. Membr. Sci. 2009, 327:118-124.
126. Lee M., Park J.K., Lee H., Lane O., Moore R.B., McGrath J.E., Baird D.G. Effects of block length and solution-casting conditions on the final morphology and properties of disulfonated poly(arylene ether sulfone) multiblock copolymer films for proton exchange membranes. Polymer 2009, 50:6129-6138.
127. Stamm H.-H. Phosphorhaltige Ionenaustauscherharze -Literaturübersicht-, Edts. Institut für Radiochemie Gesellschaft für Kernforschung Karlsruhe mbH 1964.
128. Soldenhoff K., Tran M.T., Griffith C. Recovery of uranium from phosphoric acid by ion exchange. IAEA Technical Meeting - Uranium from Unconventional Sources, Vienna 2009.
129. Jyo A., Matsufune S., Ono H., Egawa H. Preparation of phosphoric acid resins with large cation exchange capacities from macroreticular poly(glycidyl methacrylate-co-divinyl benzene) beads and their behavior in uptake of metal ions. J. Appl. Polym. Sci. 1997, 63:1327-1334.
130. Penczek S., Kaluzynski K., Pretula J. Biphosphonate units in the main polymer chain: the first synthesis. J. Polym. Sci., Part A: Polym. Chem. 2012, 50:3030-3038.
131. Alexandratos S.D., Trochimczuk A.W., Crick D.W., Horwitz E.P., Gatrone R.C., Chiarzia R. Synthesis and ion-complexing properties of a novel polymer-supported reagent with diphosphonate ligands. Macromolecules 1996, 29:1021-1026.
132. Kita R. Synthesis and characterization of sulfonated ß-ketophosphonate ion exchange resins http://trace.tennessee.edu/utk_chanhonoproj/262.
133. Choi S., Nho Y.C. Electrochemical properties of polyethylene membrane materials modified with sulfonic and phosphonic acid groups. Korean J. Chem. Eng. 1999, 16:725-730.
134. Kennedy J., Ficken G.E. Syntheses of metal-complexing polymers. II. Phosphonamide and α-aminophosphonate polymers. J. Appl. Chem. 1958, 8:465-468.
135. Yebra-Biurrun M.C., Bermejo-Barrera A., Bermejo-Barrera M.P. Synthesis and characterization of a poly(aminophosphonic acid) chelating resin. Anal. Chim. Acta. 1992, 264:53-58.
136. Nesterenko P.N., Shaw M.J., Hill S.J., Jones P. Aminophosphonate-functionalized silica: a versatile chromatographic phase for high-performance chelation ion chromatography. Microchem. J. 1999, 62:58-69.
137. Alexandros S.D., Crick D.W., Quillen D.R. Development of bifunctional polymers for metal ion separation: ionic recognition with polymer-supported reagents. Ind. Eng. Chem. Res. 1991, 30:772-778.
138. Karabachnik M.I., Meved T. New method for the synthesis of 1-aminoalkylphosphonic acids communication 1. Bull. Acad. Sci. USSR 1953, 2:769-777.
139. Fields E.K. The synthesis of esters of substituted amino phosphonic acids. J. Am. Chem. Soc. 1952, 74:1528-1531.
140. Naydemova E.D., Todorov P.T., Troev K.D. Recent synthesis of aminophosphonic acids as potential biological importance. Amino Acids 2010, 38:23-30.
141. Tayouo R., David G., Ameduri B., Roziere J., Roualdes S. New fluorinated polymers bearing pendant phosphonic acid groups. Proton conducting membranes for fuel cells. Macromolecules 2010, 43:5269-5276.
142. Parvole J., Jannasch P. Poly(arylene ether sulfone)s with phosphonic acid and bis(posphonic acid) on short alkyl side chains for proton exchange membranes. J. Mater. Chem. 2008, 18:5547-5556.
143. Fukuzaki N., Nakabayashi K., Nakazawa S., Murata S., Higashihara T., Ueda M. Highly phosphonated poly(N-phenylacrylamide) for proton exchange membranes. J. Polym. Sci., Part A: Polym. Chem. 2010, 49:93-100.
144. Papadimitriou K.D., Andreopoulou A.K., Kallitsis J.K. Phosphonated fully aromatic polyethers for PEMFCs applications. J. Polym. Sci., Part A: Polym. Chem. 2010, 48:2817-2827.
145. Labalme E., David G., Buvat P., Bigarre J., Boucheteau T. New hybrid membranes based on phosphonic acid functionalized silica particles for PEMFC. J. Polym. Sci., Part A: Polym. Chem. 2012, 50:1308-1316.
146. Wagner T., Manhart A., Deniz N., Kaltbeitzel A., Wagner M., Brunklaus G., Meyer W.H. Vinylphosphonic acid homo- and blockcopolymers. Macromol. Chem. Phys. 2009, 210:1903-1914.
147. Allcock H.R., Hofmann M.A., Ambler C.M., Lvov S.N., Zhou X.Y., Chalkova E., Weston J. Phenyl phosphonic acid functionalized poly(aryloxyphosphazenes) as proton-conducting membranes for direct methanol fuel cells. J. Membr. Sci. 2002, 201:17-54.
148. Joseph J., Tseng C., Hwang B. Phosphinic acid-grafted mesostructured silica/Nafion hybrid membranes for fuel cell applications. J. Power Sources 2011, 196:7363-7371.
149. Atanasov V., Kerres J. Highly phosphonated polypentafluorostyrene. Macromolecules 2011, 44:6416-6423.
150. Shao Z., Sannigrahi A., Jannasch P. Poly(tetrafluorostyrenephosphonic acid)-polysulfone block copolymers and membranes. J. Polym. Sci., Part A: Polym. Chem. 2013, 51:4657-4666.
151. Abu-Thabit N.Y., Ali S.A., Zaidi S.M.J. New highly phosphonated polysulfone membranes for PEM fuel cells. J. Membr. Sci. 2010, 360:26-33.
152. Tamura Y., Sheng L., Nakazawa S., Higashihara T., Ueda M. Polymer electrolyte membranes based on polystyrenes with phosphonic acid via long alkyl side chain. J. Polym. Sci., Part A: Polym. Chem. 2012, 50:4334-4434.
153. Kim S.H., Park Y.C., Jung G.H., Cho C.G. Characterization of poly(styrene-b-vinylbenzylphosphonic acid) copolymer by titration and thermal analysis. Macromol. Res. 2007, 15:587-594.
154. Sannigrahi A., Takamuku S., Jannasch P. Block selective grafting of poly(vinylphosphonic acid) from aromatic multiblock copolymers for nanostructured electrolyte membranes. Polym. Chem. 2013, 4:4207-4218.
155. Rusanov A.L., Kostoglodov P.V., Abadie M.J.M., Voytekunas V.Y., Likhachev D.Y. Proton-conducting polymers and membranes carrying phosphonic acid groups. Adv. Polym. Sci. 2008, 216:125-155.
156. Park C.H., Nam S.Y., Lee Y.M. Pervaporation separation of an aqueous organic mixture through a poly(acrylonitrile-co-vinylphosphonic acid) membrane. J. Appl. Polym. Sci. 1999, 74:83-89.
157. Tan J., Gemeinhart R.A., Ma M., Saltzman W.M. Improved cell adhesion and proliferation on synthetic phosphonic acid-containing hydrogels. Biomaterials 2005, 26:3663-3671.
158. Gemeinhart R.A., Bare C.M., Haasch R.T., Gemeinhart E.J. Osteoblast-like cell attachtment to and calcification of novel phosphonate-containing polymeric substrates. J. Biomed. Mater. Res. Part A 2006, 78A:433-440.
159. Ziegler A., Landfester K., Musyanovych A. Synthesis of phosphonate-functionalized polystyrene and poly(methyl methacrylate) particles and their kinetic behavior in miniemulsion polymerization. Colloid Polym. Sci. 2009, 287:1261-1271.
160. Engel R., Cohen J.L.I. Synthesis of Carbon-Phosphorus Bonds 2004, CRC Press. 2nd edition.
161. Freedman L.D., Doak G.O. The preparation and properties of phosphonic acids. Chem. Rev. 1957, 57:479-523.
162. David G., Negrall-Guirao C., Iftene F., Boutevin B., Chougrani K. Recent progress on phosphonate vinyl monomers and polymers therefore obtained by radical (co)polymerization. Polym. Chem. 2012, 3:265-274.
163. Zhuang H., Pearce E.M., Kwei T.K. Miscibility studies of poly(styrene-co-4-vinylbenzenephosphonic acid diethyl ester) with poly(vinylphenol). Macromolecules 1994, 27:6398-6403.
164. Langner C. Teilfluoriertes Poly(phenylensulfid) aus Decafluorbiphenyl als Material für Polymerelektrolytmembranen 2011, (Master thesis), TU Dresden, Fakultät Mathematik und Naturwissenschaften.
165. Phillips P.J., MacKnight W.J. Mechanical and thermal properties of phosphorylated polyethylene. J. Polym. Sci., Part B: Polym. Phys. 1970, 8:87-94.
166. Phillips P.J., Emerson F.A., MacKnight W.J. Structure and properties of polyethylene modified with phosphinic acid side groups. I. Mechanical and thermal studies. Macromolecules 1970, 3:767-771.
167. Phillips P.J., Emerson F.A., MacKnight W.J. Structure and properties of polyethylene modified with phosphonic acid side groups. II: dielectric properties. Macromolecules 1970, 3:771-777.
168. Opper K.L., Fassbender B., Brunklaus G., Spiess H.W., Wagener K.B. Polyethylene functionalized with precisely spaced phosphonic acid groups. Macromolecules 2009, 42:4407-4409.
169. C. Vogel, Unpublished results.
170. Masson S., Saint-Clair J., Saquet M. Two methods for the synthesis of (2-mercaptophenyl)phosphonic acid. Synthesis 1993, 485-486.
171. Trostyanskaya E.B., Makarova S.B. Anion exchangers of the onium class of compounds. Zh. Priklad. Khim. 1966, 39:1754-1760.
172. Hickner M.A., Herring A.M., Coughlin E.B. Anion exchange membranes: current status and moving forward. J. Polym. Sci., Part B: Polym. Phys. 2013, 51:1727-1735.
173. Luo Y., Guo J., Wang C., Chu D. Quaternized poly(methyl methacrylate-co-butylacrylate-co-vinylbenzylchloride) membrane for alkaline fuel cells. J. Power Sources 1992, 195:3763-3771.
174. Ko B., Sohn J., Shin J. Radiation-induced synthesis of solid alkaline exchange membranes with quaternized 1,4-diazabicyclo[2,2,2] octane pendant groups for fuel cell applications. Polymer 2012, 53:4652-4661.
175. Kubota H., Yano K., Sawada S., Aosaki Y., Watanabe J., Usui T., Ono S., Shoda T., Okazaki K., Tomoi M., Shindo M., Onozuka T. Novel anion exchange resins with thermal stability: synthesis and characteristics. Spec. Publ. R. Soc. Chem. 1996, 182:182-192.
176. Watanabe J., Kubota H., Yano K., Fukuda J., Shindo M. Anion exchange resins with heat and chemical stability. UltraPure Water 1997, 39-42.
177. Irving J., Dale J.A. The development and application of type III strong base anion exchange resin (Purolite A-555). Spec. Publ. R. Soc. Chem. 1996, 239:221-236.
178. Yanagi H., Fukata K. Anion exchange membrane and ionomer for alkaline membrane fuel cells (AMFCs). Electrochem. Soc. Trans. 2008, 16:257-262.
179. Dragan E.S., Avram E., Axente D., Marcu C. Ion-exchange resins. III. Functionalization-morphology correlations in the synthesis of some macroporous, strong basic anion exchangers and uranium-sorption properties evaluation. J. Polym. Sci., Part A: Polym. Chem. 2004, 42:2451-2461.
180. Neagu V., Avram E., Lisa G. N-methylimidazolium functionalized strongly basic anion exchangers: synthesis, chemical and thermal stability. React. Funct. Polym. 2010, 70:88-97.
181. Zeng Q.H., Liu Q.L., Broadwell I., Zhu A.M., Xiong Y., Tu X.P. Anion exchange membranes based on quaternized polystyrene-block-poly(ethylene-ran-butylene)-block-polystyrene for direct methanol alkaline fuel cells. J. Membr. Sci. 2010, 349:237-243.
182. Sata T., Tsujimoto M., Yamaguchi T., Matsusaki K. Change of anion exchange membranes in an aqueous sodium hydroxide solution at high temperature. J. Membr. Sci. 1996, 112:161-170.
183. Zhou J., Ünlü M., Anestis-Richard I., Kim H., Kohl P.A. Solvent processible, high-performance partially fluorinated copoly(arylene ether) alkaline ionomers for alkaline electrodes. J. Power Sources 2011, 196:7924-7930.
184. Tanaka M., Koike M., Miyatake K., Watanabe M. Synthesis and properties of anion conductive ionomers containing fluorenyl groups for alkaline fuel cell applications. Polym. Chem. 2011, 2:99-106.
185. Wang G., Weng Y., Chu D., Xie D., Chen R. Preparation of alkaline anion exchange membranes based on functional poly(ether-imide) polymers for potential fuel cell applications. J. Membr. Sci. 2009, 326:4-8.
186. Bauer B., Strathmann H., Effenberger F. Anion-exchange membranes with improved alkaline stability. Desalination 1990, 79:125-144.
187. Zschocke P., Quellmalz D. Novel ion exchange membranes based on an aromatic polyethersulfone. J. Membr. Sci. 1985, 22:325-332.
188. Wang J., Li S., Zhang S. Novel hydroxide-conducting polyelectrolyte composed of an poly(arylene ether sulfone) containing pendant quaternary guanidinium groups for alkaline fuel cell applications. Macromolecules 2010, 43:3890-3896.
189. Zhou J., Ünlü M., Richard-Anestis I., Kohl P.A. Crosslinked, epoxy-based anion conductive membranes for alkaline membrane fuel cells. J. Membr. Sci. 2010, 350:286-292.
190. Pan J., Lu S., Huang A., Zhuang L., Lu J. High-performance alkaline polymer electrolyte for fuel cell applications. Adv. Funct. Mater. 2010, 20:312-319.
191. Lu S., Huang A., Zhuang L., Lu J. Alkaline polymer electrolyte fuel cells completely free from noble metal catalysts. PNAS 2008, 52:20611-20614.
192. Hwang G., Ohya H. Preparation of anion-exchange membrane based on block copolymers. Part 1. Amination of the chloromethylated copolymers. J. Membr. Sci. 1998, 140:195-203.
193. Lin X., Varcoe J.R., Poynton S.D., Liang X., Ong A.L., Ran J., Li Y., Xu T. Alkaline polymer electrolytes containing pendant dimethylimidazolium groups for alkaline membrane fuel cells. J. Mater. Chem. A 2013, 1:7262-7269.
194. Hossain M.A., Lim Y., Lee S., Jang H., Choi S., Hong T., Jin L., Kim W.G. Synthesis and characterization of tetra-imidazolium hydroxides poly(fluorenylene ether sulfone) anion exchange membranes. React. Funct. Polym. 2013, 73:1299-1305.
195. Ong A.L., Saad S., Lan R., Goodfellow R.J., Tao S. Anionic membrane and ionomer based poly(2,6-dimethyl-1,4-phenylene oxide) for alkaline membrane fuel cells. J. Power Sources 2011, 196:8272-8279.
196. Wu Y., Wu C., Xu T., Lin X., Fu Y. Novel silica/poly(2,6-dimethyl-1,4-phenylene oxide) hybrid anion-exchange membranes for alkaline fuel cells: effect of heat treatment. J. Membr. Sci. 2009, 338:51-60.
197. Rao A.H.N., Thankamony R.L., Kim H., Nam S., Kim T. Imidazolium-functionalized poly(arylene ether sulfone) block copolymer as an anion exchange membrane for alkaline fuel cell. Polymer 2013, 54:111-119.
198. Katzfuß A., Gogel V., Jörissen L., Kerres J. The application of covalently cross-linked BrPPO as AEM in alkaline DMFC. J. Membr. Sci. 2013, 425-426:131-140.
199. Sollogub C., Guinault A., Bonnebat C., Bennjima M., Akrour L., Fauvarque J.F., Ogier L. Formation and characterization of crosslinked membranes for alkaline fuel cells. J. Membr. Sci. 2009, 335:37-42.
200. Stoica D., Ogier L., Akrour L., Alloin F., Fauvarque J. Anionic membranes based on polyepichlorhydrin matrix for alkaline fuel cell: physical and electrochemical properties. Electrochim. Acta 2007, 53:1596-1603.
201. Hradil J., Svec F. Reactive polymers. 61. Synthesis of strongly basic anion exchange methacrylate resins. React. Polym. 1990, 13:43-53.
202. Xiong Y., Fang J., Zeng Q.H., Liu Q.L. Preparation and characterization of cross-linked quaternuzed poly(vinyl alcohol) membranes for anion exchange membrane fuel cells. J. Membr. Sci. 2008, 311:319-325.
203. Qiao J., Fu J., Lin R., Ma J., Liu J. Alkaline solid polymer electrolyte membranes based on structurally modified PVA/PVP with improved alkali stability. Polymer 2010, 51:4850-4859.
204. Fernandez-Prini R., Schulman P. The effect of temperature on the stability of ion-exchange resins in aqueous media. J. Appl. Polym. Sci. 1984, 29:341-352.
205. Yao W., Tsai T., Chang Y., Chen M. Polymer-based hydroxide conducting membranes, 6,183,914 B1 2001.
206. Malshe V.C., Vaida M.S. Synthesis of 3-chloro-2-hydroxy propyl methacrylate and ion exchange resins therefrom. React. Funct. Polym. 1999, 39:83-89.
207. Hodgdon R.B., MacDonald R.J., Alexander S.S. High ion exchange capacity polyelectrolytes having high crosslink densities and caustic stability. US 5,118,717 1990.
208. Liu J., Yao J., Wang H., Chan K. Fabrication of porous polymer particles with high anion exchange capacity by amination reaction in aqueous media. Green Chem. 2006, 8:386-389.
209. Cao Y., Wang X., Scott K. The synthesis and characteristic of an anion conductive polymer membrane for alkaline anion exchange fuel cell. J. Power Sources 2012, 201:226-230.
210. Martin R., El Moussaoui R. Solid alkaline fuel cell comprising ion exchange membrane. EU 1612874 A1 2004.
211. Mutsui K., Tobita E., Sugimoto K., Kondo K., Akimoto A. Novel ion-exchange membranes having fluorocarbon backbone: preparation and stability. J. Appl. Polym. Sci. 1986, 32:4137-4143.
212. Salerno H.L.S., Beyer F.L., Elabd Y.A. Anion exchange membranes derived from Nafion precursor for the alkaline fuel cel. J. Polym. Sci., Part B: Polym. Phys. 2012, 50:552-562.
213. Valade D., Boschet F., Roulades S., Ameduri B. Preparation of solid alkaline fuel cell binders based on fluorinated poly(diallyldimethylammonium chloride)s [PolyDADMAC] or poly(chlorotrifluoroethylene-co-DADMAC) copolymeers. J. Polym. Sci., Part A: Polym. Chem. 2009, 47:2043-2205.
214. Wan Y., Peppley B., Creber K.A.M., Bui V.T. Anion-exchange membranes composed of quaternized-chitosan derivates for alkaline fuel cells. J. Power Sources 2010, 195:3785-3793.
215. Clark T.J., Robertson N.J., Kostalik H.A., Lobkovsky E.B., Mutolo P.F., Abruna H.D., Coates G.W. A ring-opening metathesis polymerization route to alkaline anion exchange membranes: development of hydroxide-conducting thin films from an ammonium-functionalized monomer. J. Am. Chem. Soc. 2009, 131:12888-12889.
216. Zhang Z., Wu L., Varcoe J., Li C., Ong A.L., Poynton S., Xu T. Aromatic polyelectrolytes via polyacylation of pre-quaternized monomers for alkaline fuel cells. J. Mater. Chem. A 2013, 1:2595-2601.
217. Wang J., Wang J., Li S., Zhang S. Poly(arylene ether sulfone)s ionomers with pendant quaternary ammonium groups for alkaline anion exchange membranes: preparation and stability issues. J. Membr. Sci. 2011, 368:246-253.
218. Lee K.M., Wycisk R., Litt M., Pintauro P.N. Alkaline fuel cell membranes from xylylene block ionenes. J. Membr. Sci. 2011, 383:254-261.
219. Arges C.G., Ramani V., Pintauro P.N. Anion exchange membrane fuel cells. Electrochem. Soc. Interface 2010, 31-35.
220. Qiao J., Zhang J., Zhang J. Anion conducting poly(vinyl alcohol)/poly(diallyldimethyl ammonium chloride) membranes with high durable alkaline stability for polymer electrolyte membrane fuel cells. J. Power Sources 2013, 237:1-4.
221. Dow Chemical Company: Product information Amberjet 9000OH.
222. Dow Chemical Company: Product information DOWEX Marathon A.
223. Dow Chemical Company: Product information DOWEX Marathon A2.
224. Wheaton R.M., Bauman W.C. Properties of strongly basic anion exchange resins. Ind. Eng. Chem. 1951, 43:1088-1093.
225. Edson J.B., Macomber C.S., Pivovar B.S., Boncella J.M. Hydroxide based decomposition pathways of alkyltrimethylammonium cations. J. Membr. Sci. 2012, 399-400:49-59.
226. Ye Y., Elabd Y.A. Relative chemical stability of imidazolium-based alkaline anion exchange polymerized ionic liquids. Macromolecules 2011, 44:8494-8503.
227. Fujimoto C., Kim D., Hibbs M., Wrobleski D., Kim Y.S. Backbone stability of quaternized polyaromatics for alkaline membrane fuel cells. J. Membr. Sci. 2012, 423-424:438-449.
228. Varcoe J.R., Slade R.C.T. Prospects for alkaline anion-exchange membranes in low temperature fuel cells. Fuel Cells 2005, 5:187-200.
229. Xing B., Savadogo O. Hydrogen/oxygen polymer electrolyte membrane fuel cells (PEMFCs) based on alkaline-doped polybenzimidazole (PBI). Electrochem. Commun. 2000, 2:697-702.
230. Neagu V., Bunia I., Plesca I. Ionic polymers VI. Chemical stability of strong base anion exchangers in aggressive media. Polym. Degrad. Stab. 2000, 70:463-468.
231. Luca C., Neagu V., Grigoriu G., Simionescu B.C. An unconventional synthesis of strongly basic anion exchangers. Spec. Publ. R. Soc. Chem. 1997, 196:70-77.
232. Tomoi M., Yamaguchi K., Ando R., Kantake Y., Aosaki Y., Kubota H. Synthesis and thermal stability of novel anion exchange resins with spacer chains. J. Appl. Polym. Sci. 1997, 64:1161-1167.
233. Hellwinkel D., Seifert H. Ringschlussreaktionen von 2'-heterosubstituierten Biphenyl-2-diazonium-Salzen zu (spiro)cyclischen Tetraarylammonium-Salzen und Tribenz[b.d.f.]azepinen. Chem. Ber. 1972, 105:880-906.
234. Hellwinkel D., Seifert H. Zur Frage des pentakoordinierten Stickstoffs: Reaktionen von (spiro)cyclischen Tetraarylammonium-Salzen mit Nukleophilen. Liebigs Ann. Chem. 1972, 762:29-54.
235. Li N., Guiver M.D., Binder W.H. Towards high conductivity in anion-exchange membranes for alkaline fuel cells. ChemSusChem 2013, 6:1376-1383.
236. Kenawy E., Abdel-Hay F.I., El-Shanshoury A.E.R., El-Newehy M.H. Biologically active polymers: synthesis and antimicrobial activity of modified glycidyl methacrylate polymers having a quaternary ammonium and phosphonium groups. J. Control. Release 1998, 50:145-152.
237. Kanazawa A., Ikeda T., Endo T. Novel polycationic biocides: synthesis and antibacterial activity of polymeric phosphonium salts. J. Polym. Sci., Part A: Polym. Chem. 1993, 31:335-343.
238. Bansal R., Tripathi S.K., Kumar P. Lipophilic and cationic triphenylphosphonium grafted linear polyethyleneimine polymers for efficient gene delivery to mammalian cells. J. Mater. Chem. 2012, 22:25427-25436.
239. Ornelas-Megiatto C., Wich P.R., Frechet J.M.J. Polyphosphonium polymers for siRNA delivery: an efficient and nontoxic alternative to polyammonium carriers. J. Am. Chem. Soc. 2012, 134:1902-1905.
240. Noonan K.J.T., Hugar K.M., Kostalik H.A., Lobkovsky E.B., Abruna H.D., Coates G.W. Phosphonium-functionalized polyethylene: a new class of base-stable alkaline anion exchange membranes. J. Am. Chem. Soc. 2012, 134:18161-18164.
241. Gu S., Cai R., Yan Y. Self-crosslinking for dimensionally stable and solvent resistant quaternary phosphonium based hydroxide exchange membranes. Chem. Commun. 2011, 47:2856-2858.
242. Gu S., Cai R., Luo T., Chen Z., Sun M., Liu Y., He G., Yan Y. A soluble and highly conductive ionomer for high-performance hydroxide exchange membrane fuel cells. Angew. Chem. 2009, 121:6621-6624.
243. Yan Y., Gu S., Wang F. Highly basic ionomers and membranes and anion/hydroxide exchange fuel cells comprosing the ionomers and membranes. US 0119410 A1 2012.
244. Hemp S.T., Zhang M., Tamami M., Long T.E. Phosphonium ionenes from well-defined step-growth polymerization: thermal and melt rheological properties. Polym. Chem. 2013, 4:3582-3590.
245. Chen L.D., Mandal D., Gladysz J.A., Bühlmann P. Chemical stability and application of a fluorophilic tetraalkylphosphonium salt in fluorous membrane anion selective electrodes. New J. Chem. 2010, 34:1867-1874.