Origami-inspired integrated planar-spherical overconstrained mechanisms

Journal of Mechanical Design, Transactions of the ASME

Volumn 136, Issue 5, 2014, Pages

  Wei, Guowu ^a   Dai, Jian S ^a,b  

^a KING'S COLLEGE LONDON   (United Kingdom)

^b TIANJIN UNIVERSITY   (China)

Author keywords

[No Author keywords available]

Indexed keywords

KINEMATICS; SPHERES;

ASSEMBLY CONDITION; CONSTRAINTS MATRIX; GEOMETRIC CONSTRAINT; LOOP EQUATIONS; NEW MECHANISMS; OVER-CONSTRAINED; OVER-CONSTRAINT; OVERCONSTRAINED MECHANISM; PLANAR FOUR-BAR LINKAGES; SPHERICAL LINKAGES;

LOCKS (FASTENERS);

EID: 84897880619     PISSN: 10500472     EISSN: None     Source Type: Journal    
DOI: 10.1115/1.4025821     Document Type: Article

References (44)

1. Dai, J. S., and Rees Jones, J., 1999, "Mobility in Metamorphic Mechanisms of Foldable/Erectable Kinds," ASME J. Mech. Des., 121(3), pp. 375-382.
2. Cundy, H. M., and Rollett, A. P., 1952, Mathematical Models, Oxford University Press, New York.
3. Wohlhart, K., 1993, "Heureka Octahedron and Brussels Folding Cube as Special Cases of the Turing Tower," Proceedings of the 6th International symposium Teoria si Practica Mecanismelor, Vol. 2, pp. 303-311.
4. Demaine, E., and ORourke, J., 2007, Geometric Folding Algorithms, Cambridge University Press, New York.
5. Cromvik, C., 2007, "Numerical Folding of Airbags Based on Optimization and Origami," Master's thesis, Chalmers University of Technology and Goteborg University, Sweden.
6. Ma, J., and You, Z., 2010, "The Origami Crash Box," In Origami 5: the 5th International Conference on Origami in Science Mathematics and Education.
7. Heller, A., 2003, "A Giant Leap for Space Telescopes," Science and Technology Review, Lawrence Livermore National Laboratory, Livermore, CA, pp. 12-18.
8. Dai, J. S., and Rees Jones, J., 2002, "Kinematics and Mobility Analysis of Carton Folds in Packing Manipulation Based on the Mechanism Equivalent," Proc. Inst. Mech. Eng., Part C: J. Mech. Eng. Sci., 216(10), pp. 959-970. (Pubitemid 35280975)
9. Liu, H., and Dai, J. S., 2002, "Carton Manipulation Analysis Using Configuration Transformation," Proc. Inst. Mech. Eng., Part C: J. Mech. Eng. Sci., 216(5), pp. 543-555. (Pubitemid 34604824)
10. Dubey, V. N., and Dai, J. S., 2006, "A Packaging Robot for Complex Cartons," Ind. Robot: Int J., 33(2), pp. 82-87.
11. Dai, J. S., Medland, A., and Mullineux, G., 2009, "Carton Erection Using Reconfigurable Folder Mechanisms," Packag. Technol. Sci., 22(2), pp. 385-395.
12. Dai, J. S., and Caldwell, D. G., 2010, "Origami-Based Robotic Paper-and-Board Packaging For Food Industry," Trends Food Sci. Technol., 21(3), pp. 153-157.
13. Guest, S. D., and Pellegrino, S., 1994, "The Folding of Triangulated Cylinders, Part I: Geometric Considerations," ASME, J. Appl. Mech., 61, pp. 773-777.
14. Guest, S. D., and Pellegrino, S., 1994, "The Folding of Triangulated Cylinders, Part II: The Folding Process," ASME, J. Appl. Mech., 61(4), pp. 777-783.
15. Guest, S. D., and Pellegrino, S., 1996, "The Folding of Triangulated Cylinders, Part III: Experiments," ASME, J. Appl. Mech., 63(1), pp. 77-83. (Pubitemid 126765746)
16. Song, J., Chen, Y., and Lu, G., 2012, "Axial Crushing of Thin-Walled Structures With Origami Patterns," Thin-Walled Struct., 54, pp. 65-71.
17. Tachi, T., 2010, "Origamizing Polyhedral Surfaces," IEEE Trans. Vis. Comput. Graph., 16(2), pp. 298-311.
18. Dai, J. S., and Rees Jones, J., 1997, "Theory on Kinematic Synthesis and Motion Analysis of Origami Cartons," Science and Technology Report No. PS 97 0184, Unilever Research.
19. Gan, D. M., Dai, J. S., and Liao, Q. Z., 2010, "Constraint Analysis on Mobility Change of a Novel Metamorphic Parallel Mechanism," Mech. Mach. Theory, 45(12), pp. 1864-1876.
20. Dai, J. S., and Wang, D., 2007, "Geometric Analysis and Synthesis of the Metamorphic Robotic Hand," ASME, J. Appl. Mech., 129(11), pp. 1191-1197. (Pubitemid 350177248)
21. Rodriguez Leal, E., and Dai, J. S., 2007, "From Origami to a New Class of Centralized 3-dof Parallel Mechanisms," Proceedings of 31st ASME Mechanisms and Robotics Conference, Las Vegas, Nevada, September 4-7, 2007, ASME Paper No. DETC2007-35516, pp. 1183-1193.
22. Rodriguez-Leal, E., 2009, "Geometry, Mobility and Characteristics of a New Family of Centralized Motion Parallel Mechanisms Inspired From Artiomimetics," Ph.D. dissertation, Kings College London, London, UK.
23. Wohlhart, K., 2007, "Cupola Linkages," 12th IFToMM World Congress.
24. Winder, B., Magleby, S., and Howell, L. L., 2007, "Kinematic Representations of Pop-Up Paper Mechanisms," 31st ASME Mechanisms and Robotics Conference.
25. Winder, B., Magleby, S., and Howell, L. L., 2009, "Kinematic Representations of Pop-up Paper Mechanisms," ASME, J. Appl. Mech., 1(2), p. 021009.
26. Zhang, K., Dai, J. S., and Fang, Y., 2010, "Topology and Constraint Analysis of Phase Change in the Metamorphic Chain and Its Evolved Mechanism," ASME, J. Appl. Mech., 132(12), p. 121001.
27. Wu, W., and You, Z., 2011, "A Solution for Folding Rigid Tall Shopping Bags," Proc. R. Soc. London, Ser. A, 467, pp. 2561-2574.
28. Wu, W., and You, Z., 2010, "Modelling rigid Origami With Quaternions and Dual Quaternions," Proc. R. Soc. London, Ser. A, 466(2119), pp. 2155-2174.
29. Kawasaki, T., 1989, "On the Relation Between Mountain-Creases and Valley-Creases of a Flat Origami," Proceedings of the 1st International Meeting of Origami Science and Technology, H. Huzita, ed., pp. 229-237.
30. Greenberg, H. C., Gong, M. L., Magleby, S. P., and Howell, L. L., 2011, "Identifying Links Between Origami and Compliant Mechanisms," Mech. Sci., 2, pp. 217-225.
31. Bennett, G. T., 1914, "The Skew Isogram Mechanism," Proc. London Math. Soc., 13(2), pp. 151-173.
32. Goldberg, M., 1943, "New Five-Bar and Six-Bar Linkages in Three Dimensions," Trans. ASME, 65, pp. 649-661.
33. Waldron, K. J., 1968, "Hybrid Overconstrained Linkages," J. Mech., 3, pp. 73-78.
34. Chen, Y., and You, Z., 2007, "Spatial 6r Linkages Based on the Combination of Two Goldberg 5r Linkages," Mech. Mach. Theory, 42, pp. 1484-1498. (Pubitemid 46962686)
35. Baker, E. J., 2002, "Displacement-Closure Equations of the Unspecialised Double-Hooke's-Joint Linkage," Mech. Mach. Theory, 37, pp. 1127-1144.
36. Cui, L., and Dai, J. S., 2011, "Axis Constraint Analysis and Its Resultant 6r Double-Centered Overconstrained Mechanisms," ASME J. Mech. Rob., 3(3), p. 031004.
37. Dai, J. S., Huang, Z., and Lipkin, H., 2006, "Mobility of Overconstrained Parallel Mechanisms, Special Supplement on Spatial Mechanisms and Robot Manipulators," ASME J. Mech. Des., 128(1), pp. 220-229.
38. Dai, J. S., 2014, Screw Algebra and Kinematic Approaches for Mechanisms and Robotics, Springer.
39. Wei, G., Ding, X., and Dai, J. S., 2010, "Mobility and Geometric Analysis of the Hoberman Switch-Pitch Ball and Its Variant," ASME J. Mech. Rob., 2(3), p. 031010.
40. Wei, G., and Dai, J. S., 2012, "Synthesis of a Family of Regular Deployable Polyhedral Mechanisms (dpms)," Latest Advances in Robot Kinematics, J. Lenarčič and M. Husty, eds. Springer, New York, pp. 123-130.
41. Liu, Y., and Ting, K., 1994, "On the Rotatability of Spherical n-Bar Chains," ASME J. Mech. Des., 116(5), pp. 920-923.
42. Chiang, C. H., 2000, Kinematics of Spherical Mechanisms, Krieger Publishing Company, Malabar, FL.
43. Dai, J. S., and Shah, P., 2003, "Orientation Capability of Planar Manipulators Using Virtual Joint Angle Analysis," Mech. Mach. Theory, 38(3), pp. 241-252.
44. Yao, W., and Dai, J. S., 2008, "Dexterous Manipulation of Origami Cartons With Robotic Fingers Based on the Interactive Configuration Space," ASME J. Mech. Des., 130(2), p. 022303.