Non-destructive optical characterization of phase separation in bulk heterojunction organic photovoltaic cells

Solar Energy Materials and Solar Cells

Volumn 125, Issue , 2014, Pages 190-197

  Georgiou, D ^a   Laskarakis, A ^a   Morana, M ^b   Karagiannidis, P G ^a   Logothetidis, S ^a  

^a ARISTOTLE UNIVERSITY OF THESSALONIKI   (Greece)

^b Konarka Austria Forschungs und Entwicklungs GmbH   (Austria)

Author keywords

Morphology; Optical properties; Organic electronics; Organic solar cells; Spectroscopic Ellipsometry; Vertical phase separation

Indexed keywords

BLENDING; FULLERENES; HETEROJUNCTIONS; MORPHOLOGY; OPTICAL PROPERTIES; PHOTOELECTROCHEMICAL CELLS; PHOTOVOLTAIC CELLS; POLYMERS; SILICON; SPECTROSCOPIC ELLIPSOMETRY; SURFACE SEGREGATION; ULTRAVIOLET SPECTROSCOPY;

CHEMICAL INCOMPATIBILITY; DONOR-ACCEPTOR COPOLYMERS; OPTICAL CHARACTERIZATION; ORGANIC ELECTRONICS; ORGANIC PHOTOVOLTAIC CELL (OPVS); ORGANIC PHOTOVOLTAIC CELLS; ORGANIC SOLAR CELL; VERTICAL PHASE SEPARATIONS;

PHASE SEPARATION;

EID: 84897385622     PISSN: 09270248     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.solmat.2014.03.006     Document Type: Article

References (47)

1. D. Chirvase, J. Parisi, J.C. Hummelen, and V. Dyakonov Influence of nanomorphology on the photovoltaic action of polymer-fullerene composites Nanotechnology 15 2004 1317 1323
2. T. Agostinelli, S. Lilliu, J.G. Labram, M. Campoy-Quiles, M. Hampton, and E. Pires et al. Real-time investigation of crystallization and phase-separation dynamics in P3HT:PCBM solar cells during thermal annealing Adv. Funct. Mater. 21 2011 1701 1708
3. D.M. de Leeuw, and E. Cantatore Organic electronics: materials, technology and circuit design developments enabling new applications Mater. Sci. Semicond. Process. 11 2008 199 204
4. P. Kopola, T. Aernouts, R. Sliz, S. Guillerez, M. Ylikunnari, and D. Cheyns et al. Gravure printed flexible organic photovoltaic modules Sol. Energy Mater. Sol. Cells 95 2011 1344 1347
5. F.C. Krebs All solution roll-to-roll processed polymer solar cells free from indium-tin-oxide and vacuum coating steps Org. Electron. 10 2009 761 768
6. F.C. Krebs, T. Tromholt, and M. Jørgensen Upscaling of polymer solar cell fabrication using full roll-to-roll processing Nanoscale 2 2010 873 886
7. N. Koch Organic electronic devices and their functional interfaces ChemPhysChem 8 2007 1438 1455
8. F.C. Krebs Fabrication and processing of polymer solar cells: a review of printing and coating techniques Sol. Energy Mater. Sol. Cells 93 2009 394 412
9. H. Azimi, M. Morana, T. Ameri, B. Dastmalchi, M. Scharber, and K. Hingerl et al. Determining the internal quantum efficiency of organic bulk heterojunctions based on mono- and bis-adduct fullerenes as acceptor Sol. Energy Mater. Sol. Cells 95 2011 3093 3098
10. D.S. Germack, C.K. Chan, R.J. Kline, D.A. Fischer, D.J. Gundlach, and M.F. Toney et al. Interfacial segregation in polymer/fullerene blend films for photovoltaic devices Macromolecules 43 2010 3828 3836
11. P.G. Karagiannidis, D. Georgiou, C. Pitsalidis, A. Laskarakis, and S. Logothetidis Evolution of vertical phase separation in P3HT:PCBM thin films induced by thermal annealing Mater. Chem. Phys. 129 2011 1207 1213
12. M. Morana, H. Azimi, G. Dennler, H.-J. Egelhaaf, M. Scharber, and K. Forberich et al. Nanomorphology and charge generation in bulk heterojunctions based on low-bandgap dithiophene polymers with different bridging atoms Adv. Funct. Mater. 20 2010 1180 1188
13. M.C. Scharber, M. Koppe, J. Gao, F. Cordella, M.A. Loi, and P. Denk et al. Influence of the bridging atom on the performance of a low-bandgap bulk heterojunction solar cell Adv. Mater. (Deerfield Beach, Fla.) 22 2010 367 370
14. M. Morana, M. Wegscheider, A. Bonanni, N. Kopidakis, S. Shaheen, and M. Scharber et al. Bipolar charge transport in PCPDTBT-PCBM bulk-heterojunctions for photovoltaic applications Adv. Funct. Mater. 18 2008 1757 1766
15. J. Kettle, M. Horie, L.A. Majewski, B.R. Saunders, S. Tuladhar, and J. Nelson et al. Optimisation of PCPDTBT solar cells using polymer synthesis with Suzuki coupling Sol. Energy Mater. Sol. Cells 95 2011 2186 2193
16. P. Boland, K. Lee, and G. Namkoong Device optimization in PCPDTBT:PCBM plastic solar cells Sol. Energy Mater. Sol. Cells 94 2010 915 920
17. Z. Li, and C.R. McNeill Transient photocurrent measurements of PCDTBT:PC70BM and PCPDTBT:PC70BM solar cells: evidence for charge trapping in efficient polymer/fullerene blends J. Appl. Phys. 109 2011 074513
18. F.C. Jamieson, T. Agostinelli, H. Azimi, J. Nelson, and J.R. Durrant Field-independent charge photogeneration in PCPDTBT/PC 70 BM solar cells J. Phys. Chem. Lett. 1 2010 3306 3310
19. H. Azimi, D. Fournier, M. Wirix, E. Dobrocka, T. Ameri, and F. Machui et al. Nano-morphology characterization of organic bulk heterojunctions based on mono- and bis-adduct fullerenes Org. Electron. 13 2012 1315 1321
20. A. Maurano, R. Hamilton, C.G. Shuttle, A.M. Ballantyne, J. Nelson, and B. O'Regan et al. Recombination dynamics as a key determinant of open circuit voltage in organic bulk heterojunction solar cells: a comparison of four different donor polymers Adv. Mater. (Deerfield Beach, Fla.) 22 2010 4987 4992
21. T. Agostinelli, T.A.M. Ferenczi, E. Pires, S. Foster, A. Maurano, and C. Müller et al. The role of alkane dithiols in controlling polymer crystallization in small band gap polymer:fullerene solar cells J. Polym. Sci. Part B: Polym. Phys. 49 2011 717 724
22. P.G. Karagiannidis, N. Kalfagiannis, D. Georgiou, A. Laskarakis, N.A. Hastas, and C. Pitsalidis et al. Effects of buffer layer properties and annealing process on bulk heterojunction morphology and organic solar cell performance J. Mater. Chem. 22 2012 14624
23. M. Campoy-Quiles, T. Ferenczi, T. Agostinelli, P.G. Etchegoin, Y. Kim, and T.D. Anthopoulos et al. Morphology evolution via self-organization and lateral and vertical diffusion in polymer:fullerene solar cell blends Nat. Mater. 7 2008 158 164 (Pubitemid 351161347)
24. S. Logothetidis, D. Georgiou, A. Laskarakis, C. Koidis, and N. Kalfagiannis In-line spectroscopic ellipsometry for the monitoring of the optical properties and quality of roll-to-roll printed nanolayers for organic photovoltaics Sol. Energy Mater. Sol. Cells 112 2013 144 156
25. S. Albrecht, S. Janietz, W. Schindler, J. Frisch, J. Kurpiers, and J. Kniepert et al. Fluorinated copolymer PCPDTBT with enhanced open-circuit voltage and reduced recombination for highly efficient polymer solar cells J. Am. Chem. Soc. 134 2012 14932 14944
26. S. Imamura, K. Palanisamy, S. Kannappan, and S. Ochiai Effect of additives on the structure, nanomorphology and efficiency of PCPDTBT: PC71BM solar cells J. Korean Phys. Soc. 61 2012 464 469
27. F. Etzold, I.A. Howard, N. Forler, D.M. Cho, M. Meister, and H. Mangold et al. The effect of solvent additives on morphology and excited-state dynamics in PCPDTBT:PCBM photovoltaic blends J. Am. Chem. Soc. 134 2012 10569 10583
28. C. Koidis, S. Logothetidis, S. Kassavetis, C. Kapnopoulos, P.G. Karagiannidis, and D. Georgiou et al. Effect of process parameters on the morphology and nanostructure of roll-to-roll printed P3HT:PCBM thin films for organic photovoltaics Sol. Energy Mater. Sol. Cells 112 2013 36 46
29. C. Koidis, S. Logothetidis, A. Ioakeimidis, A. Laskarakis, and C. Kapnopoulos Key factors to improve the efficiency of roll-to-roll printed organic photovoltaics Org. Electron. 14 2013 1744 1748
30. A. Laskarakis, P.G. Karagiannidis, D. Georgiou, D.M. Nikolaidou, and S. Logothetidis Optical investigations of the effect of solvent and thermal annealing on the optoelectronic properties of poly(3,4-ethylenedioxythiophene): poly(styrenesulfonate) films Thin Solid Films 541 2013 102 106
31. G.E. Irene, and H.G. Tompkins 2005 William Andrew Publishing Norwich, NY
32. A. Laskarakis, S. Logothetidis, and M. Gioti Bonding structure of carbon nitride films by infrared ellipsometry Phys. Rev. B 64 2001 1 15
33. A. Laskarakis, and S. Logothetidis Investigation of the optical anisotropy of PET and PEN films by VIS-FUV to IR spectroscopic ellipsometry Appl. Surf. Sci. 253 2006 52 56 (Pubitemid 44667077)
34. A. Laskarakis, and S. Logothetidis On the optical anisotropy of poly(ethylene terephthalate) and poly(ethylene naphthalate) polymeric films by spectroscopic ellipsometry from visible-far ultraviolet to infrared spectral regions J. Appl. Phys. 99 2006 066101
35. E. Chibowski, and R. Perea-Carpio Problems of contact angle and solid surface free energy determination Adv. Colloid Interface Sci. 98 2002 245
36. G.E. Jellison, and F.A. Modine Parameterization of the optical functions of amorphous materials in the interband region Appl. Phys. Lett. 69 1996 371 373 (Pubitemid 126635986)
37. G.E. Jellison, F.A. Modine, P. Doshi, and A. Rohatgi Spectroscopic ellipsometry characterization of thin-film silicon nitride Thin Solid Films 313-314 1998 193 197 (Pubitemid 128418711)
38. R.M.A. Azzam, and N.M. Bashara Ellipsometry and Polarized Light 1977 North Holland Amsterdam
39. S. Nilsson, A. Bernasik, A. Budkowski, and E. Moons Morphology and phase segregation of spin-casted films of polyfluorene/PCBM blends Macromolecules 40 2007 8291 8301 (Pubitemid 350150543)
40. E. Pavlopoulou, G. Fleury, D. Deribew, F. Cousin, M. Geoghegan, and G. Hadziioannou Phase separation-driven stratification in conventional and inverted P3HT:PCBM organic solar cells Org. Electron. 14 2013 1249 1254
41. M.V. Madsen, K.O. Sylvester-Hvid, B. Dastmalchi, K. Hingerl, K. Norrman, and T. Tromholt et al. Ellipsometry as a nondestructive depth profiling tool for roll-to-roll manufactured flexible solar cells J. Phys. Chem. C 115 2011 10817 10822
42. Z. Xu, L.-M. Chen, G. Yang, C.-H. Huang, J. Hou, and Y. Wu et al. Vertical phase separation in poly(3-hexylthiophene): fullerene derivative blends and its advantage for inverted structure solar cells Adv. Funct. Mater. 19 2009 1227 1234
43. S. van Bavel, E. Sourty, G. de With, K. Frolic, and J. Loos Relation between Photoactive layer thickness, 3D morphology, and device performance in P3HT/PCBM bulk-heterojunction solar cells Macromolecules 42 2009 7396 7403
44. A. De Sio, T. Madena, R. Huber, J. Parisi, S. Neyshtadt, and F. Deschler et al. Solvent additives for tuning the photovoltaic properties of polymer-fullerene solar cells Sol. Energy Mater. Sol. Cells 95 2011 3536 3542
45. M.T. Dang, G. Wantz, H. Bejbouji, M. Urien, O.J. Dautel, and L. Vignau et al. Polymeric solar cells based on P3HT:PCBM: role of the casting solvent Sol. Energy Mater. Sol. Cells 95 2011 3408 3418
46. B.R. Aïch, J. Lu, S. Beaupré, M. Leclerc, and Y. Tao Control of the active layer nanomorphology by using co-additives towards high-performance bulk heterojunction solar cells Org. Electron. 13 2012 1736 1741
47. H. Azimi, A. Senes, M.C. Scharber, K. Hingerl, and C.J. Brabec Charge transport and recombination in low-bandgap bulk heterojunction solar cell using bis-adduct fullerene Adv. Energy Mater. 1 6 2011 1162 1168