Constitutive models for high-temperature flow behaviors of a Ni-based superalloy

Materials and Design

Volumn 59, Issue , 2014, Pages 115-123

  Lin, Y C ^a   Wen, Dong Xu ^a   Deng, Jiao ^a   Liu, Guan ^a   Chen, Jian ^b  

^a CENTRAL SOUTH UNIVERSITY   (China)

^b CHANGSHA UNIVERSITY OF SCIENCE AND TECHNOLOGY   (China)

Author keywords

Constitutive model; Flow behavior; Hot compression; Superalloy

Indexed keywords

COMPRESSION TESTING; CONSTITUTIVE MODELS; DEFORMATION; HOT PRESSING; NICKEL; PLASTIC FLOW; STRAIN HARDENING; SUPERALLOYS;

DEFORMATION TEMPERATURES; FLOW BEHAVIORS; HIGH TEMPERATURE DEFORMATION; HIGH-TEMPERATURE FLOWS; HOT DEFORMATION BEHAVIORS; NI-BASED SUPERALLOYS; WORK HARDENING BEHAVIORS; ZENER-HOLLOMON PARAMETER;

STRAIN RATE;

EID: 84896125578     PISSN: 02613069     EISSN: 18734197     Source Type: Journal    
DOI: 10.1016/j.matdes.2014.02.041     Document Type: Article

References (71)

1. Lin Y.C., Chen X.M. A critical review of experimental results and constitutive descriptions for metals and alloys in hot working. Mater Des 2011, 32:1733-1759.
2. Marchattiwar A., Sarkar A., Chakravartty J.K., Kashyap B.P. Dynamic recrystallization during hot deformation of 304 austenitic stainless steel. J Mater Eng Perform 2013, 22:2168-2175.
3. Haghdadi N., Zarei-Hanzaki A., Abedi H.R., Sabokpa O. The effect of thermomechanical parameters on the eutectic silicon characteristics in a non-modified cast A356 aluminum alloy. Mater Sci Eng A 2012, 549:93-99.
4. Shi C.J., Mao W.M., Chen X.G. Evolution of activation energy during hot deformation of AA7150 aluminum alloy. Mater Sci Eng A 2013, 571:83-91.
5. Tsao L.C., Huang Y.T., Fan K.H. Flow stress behavior of AZ61 magnesium alloy during hot compression deformation. Mater Des 2014, 53:865-869.
6. Puchi-Cabrera E.S., Staia M.H., Guérin J.D., Lesage J., Dubar M., Chicot D. Analysis of the work-hardening behavior of C-Mn steels deformed under hot-working conditions. Int J Plast 2013, 51:145-160.
7. Huang Y.C., Lin Y.C., Deng J., Liu G., Chen M.S. Hot tensile deformation behaviors and constitutive model of 42CrMo steel. Mater Des 2014, 53:349-356.
8. Belbasi M., Salehi M.T., Mousavi S.A.A.A., Ebrahimi S.M. A study on the mechanical behavior and microstructure of NiTiHf shape memory alloy under hot deformation. Mater Sci Eng A 2013, 560:96-102.
9. Sun Z.C., Zheng L.S., Yang H. Softening mechanism and microstructure evolution of as-extruded 7075 aluminum alloy during hot deformation. Mater Charac 2014, 90:71-80.
10. Momeni A., Dehghani K., Ebrahimi G.R., Kazemi S. Developing the processing maps using the hyperbolic sine constitutive equation. Mater Trans A 2013, 44:5567-5576.
11. Chen M.S., Lin Y.C., Ma X.S. The kinetics of dynamic recrystallization of 42CrMo steel. Mater Sci Eng A 2012, 556:260-266.
12. Haj M., Mansouri H., Vafaei R., Ebrahimi G.R., Kanani A. Hot compression deformation behavior of AISI 321 austenitic stainless steel. Int J Min Met Mater 2013, 20:529-534.
13. Lin Y.C., Li L.T., Xia Y.C., Jiang Y.Q. Hot deformation and processing map of a typical Al-Zn-Mg-Cu alloy. J Alloys Compd 2013, 550:438-445.
14. EI Mehtedi M., Gabrielli F., Spigarelli S. Hot workability in process modeling of a bearing steel by using combined constitutive equations and dynamic material model. Mater Des 2014, 53:398-404.
15. Nguyen D.T., Yang S.H., Jung D.W., Banh T.L., Kim Y.S. A study on material modeling to predict spring-back in V-bending of AZ31 magnesium alloy sheet at various temperatures. Int J Adv Manuf Technol 2012, 62:551-562.
16. Lin Y.C., Chen M.S., Zhong J. Constitutive modeling for elevated temperature flow behavior of 42CrMo steel. Comp Mater Sci 2008, 42:470-477.
17. Rezaei Ashtiani H.R., Parsa M.H., Bisadi H. Constitutive equations for elevated temperature flow behavior of commercial purity aluminum. Mater Sci Eng A 2012, 545:61-67.
18. Lin Y.C., Xia Y.C., Chen X.M., Chen M.S. Constitutive descriptions for hot compressed 2124-T851 aluminum alloy over a wide range of temperature and strain rate. Comp Mater Sci 2010, 50:227-233.
19. Haghdadi N., Zarei-Hanzaki A., Abedi H.R. The flow behavior modeling of cast A356 aluminum alloy at elevated temperatures considering the effect of strain. Mater Sci Eng A 2012, 535:252-257.
20. Jia Y.D., Cao F.Y., Guo S., Ma P., Liu J.S., Sun J.F. Hot deformation behavior of spray-deposited Al-Zn-Mg-Cu alloy. Mater Des 2014, 53:79-85.
21. Li B., Pan Q.L., Li C., Zhang Z.Y., Yin Z.M. Hot compressive deformation behavior and constitutive relationship of Al-Zn-Mg-Zr alloy with trace amounts of Sc. J Cent South Univ 2013, 20:2939-2946.
22. Xu G.F., Peng X.Y., Liang X.P., Li X., Yin Z.M. Constitutive relationship for high temperature deformation of Al-3Cu-05Sc alloy. T Nonferr Metal Soc 2013, 23:1549-1555.
23. Gan C.L., Xue Y.D., Wang M.J. Prediction of the flow stress of Al6061 at hot deformation conditions. Mater Sci Eng A 2011, 528:4199-4203.
24. Liao C.H., Wu H.Y., Lee S., Zhu F.J., Liu H.C., Wu C.T. Strain-dependent constitutive analysis of extruded AZ61 Mg alloy under hot compression. Mater Sci Eng A 2013, 565:1-8.
25. Quan G.Z., Shi Y., Yu C.T., Zhou J. The improved Arrhenius model with variable parameters of flow behavior characterizing for the as-cast AZ80 magnesium alloy. Mater Res 2013, 16:785-791.
26. Ji G.L., Li F.G., Li Q.H., Li H.Q., Li Z. A comparative study on arrhenius-type constitutive model and artificial neural network model to predict high-temperature deformation behaviour in Aermet100 steel. Mater Sci Eng A 2011, 528:4774-4782.
27. Li H.P., He L.F., Zhao G.Q., Zhang L. Constitutive relationships of hot stamping boron steel B1500HS based on the modified arrhenius and Johnson-Cook model. Mater Sci Eng A 2013, 580:330-348.
28. Li H.Y., Wei D.D., Hu J.D., Li Y.H., Chen S.L. Constitutive modeling for hot deformation behavior of T24 ferritic steel. Comp Mater Sci 2012, 53:425-430.
29. Zou D.N., Wu K., Han Y., Zhang W., Cheng B., Qiao G.J. Deformation characteristic and prediction of flow stress for as-cast 21Cr economical duplex stainless steel under hot compression. Mater Des 2013, 51:975-982.
30. Yin F., Hua L., Mao H.J., Han X.H. Constitutive modeling for flow behavior of GCr15 steel under hot compression experiments. Mater Des 2013, 43:393-401.
31. Dehghan H., Abbasi S.M., Momeni A., Karimi-Taheri A. On the constitutive modeling and microstructural evolution of hot compressed A286 iron-base superalloy. J Alloys Compd 2013, 564:13-19.
32. Mirzaei A., Zarei-Hanzaki A., Haghdadi N., Marandi A. Constitutive description of high temperature flow behavior of Sanicro-28 super-austenitic stainless steel. Mater Sci Eng A 2014, 589:76-82.
33. Samantaray D., Mandal S., Bhaduri A.K. Constitutive analysis to predict high-temperature flow stress in modified 9Cr-1Mo (P91) steel. Mater Des 2010, 31:981-984.
34. Krishnan S.A., Phaniraj C., Ravishankar C., Bhaduri A.K., Sivaprasad P.V., Raj B. Strain dependent constitutive analysis of hot deformation behaviour in 9Cr-1Mo ferritic steel. Mater High Temp 2012, 29:33-40.
35. Peng J., Zhou C.Y., Dai Q., He X.H. An improved constitutive description of tensile behavior for CP-Ti at ambient and intermediate temperatures. Mater Des 2013, 50:968-976.
36. Peng X., Guo H., Shi Z., Qin C., Zhao Z. Constitutive equations for high temperature flow stress of TC4-DT alloy incorporating strain, strain rate and temperature. Mater Des 2013, 50:198-206.
37. Pilehva F., Zarei-Hanzaki A., Ghambari M., Abedi H.R. Flow behavior modeling of a Ti-6Al-7Nb biomedical alloy during manufacturing at elevated temperatures. Mater Des 2013, 51:457-465.
38. Cui J.H., Yang H., Sun Z.C., Li H.W., Li Z.J., Shen C.W. Flow behavior and constitutive model using piecewise function of strain for TC11 alloy. Rare Metal Mater Eng 2012, 41:397-401.
39. Guo J.H., Zhao S.D., Murakami R.I., Ding R.X., Fan S.Q. Modeling the hot deformation behavior of Al alloy 3003. J Alloys Compd 2013, 566:62-67.
40. Lin Y.C., Li L.T., Fu Y.X., Jiang Y.Q. Hot compressive deformation behavior of 7075 Al alloy under elevated temperature. J Mater Sci 2012, 47:1306-1318.
41. Lin Y.C., Li L.T., Jiang Y.Q. A phenomenological constitutive model for describing thermo-viscoplastic behavior of Al-Zn-Mg-Cu alloy under hot working condition. Exp Mech 2012, 52:993-1002.
42. Lin Y.C., Ding Y., Chen M.S., Deng J. A new phenomenological constitutive model for hot tensile deformation behaviour of a typical Al-Cu-Mg alloy. Mater Des 2013, 52:118-127.
43. Lin Y.C., Li Q.F., Xia Y.C., Li L.T. A phenomenological constitutive model for high temperature flow stress prediction of Al-Cu-Mg alloy. Mater Sci Eng A 2012, 534:654-662.
44. He A., Xie G.L., Zhang H.L., Wang X.T. A comparative study on Johnson-Cook, modified Johnson-Cook and Arrhenius-type constitutive models to predict the high temperature flow stress in 20CrMo alloy steel. Mater Des 2013, 52:677-685.
45. Lin Y.C., Chen X.M. A combined Johnson-Cook and Zerilli-Armstrong model for hot compressed typical high-strength alloy steel. Comp Mater Sci 2010, 49:628-633.
46. Nguyen D.T., Banh T.L., Jung D.W., Yang S.H., Kim Y.S. A modified Johnson-Cook model to predict stress-strain curves of boron steel sheets at elevated and cooling temperatures. High Temp Mater Proc 2012, 31:37-45.
47. Kotkunde N., Krishnamurthy H.N., Puranik P., Gupta A.K., Singh S.K. Microstructure study and constitutive modeling of Ti-6Al-4V alloy at elevated temperatures. Mater Des 2014, 54:96-103.
48. Song W.D., Ning J.G., Mao X.N., Tang H.P. A modified Johnson-Cook model for titanium matrix composites reinforced with titanium carbide particles at elevated temperatures. Mater Sci Eng A 2013, 576:280-289.
49. Lin Y.C., Chen M.S., Zhong J. Prediction of 42CrMo steel flow stress at high temperature and strain rate. Mech Res Commun 2008, 35:142-150.
50. Lin Y.C., Chen X.M., Wen D.X., Chen M.S. A physically-based constitutive model for a typical nickel-based superalloy. Comp Mater Sci 2014, 83:282-289.
51. Wang L., Liu F., Zuo Q., Chen C.F. Prediction of flow stress for N08028 alloy under hot working conditions. Mater Des 2013, 47:737-745.
52. Momeni A., Dehghani K., Poletti M.C. Law of mixture used to model the flow behavior of a duplex stainless steel at high temperatures. Mater Chem Phys 2013, 139:747-755.
53. Yan T., Yu E.L., Zhao Y.Q. Constitutive modeling for flow stress of 55SiMnMo bainite steel at hot working conditions. Mater Des 2013, 50:574-580.
54. Lin Y.C., Zhang J., Zhong J. Application of neural networks to predict the elevated temperature flow behavior of a low alloy steel. Comp Mater Sci 2008, 43:752-758.
55. Quan G.Z., Lv W.Q., Mao Y.P., Zhang Y.W., Zhou J. Prediction of flow stress in a wide temperature range involving phase transformation for as-cast Ti-6Al-2Zr-1Mo-1V alloy by artificial neural network. Mater Des 2013, 50:51-61.
56. Haghdadi N., Zarei-Hanzaki A., Khalesian A.R., Abedi H.R. Artificial neural network modeling to predict the hot deformation behavior of an A356 aluminum alloy. Mater Des 2013, 49:386-391.
57. Peng W.W., Zeng W.D., Wang Q.J., Yu H.Q. Comparative study on constitutive relationship of as-cast Ti60 titanium alloy during hot deformation based on Arrhenius-type and artificial neural network models. Mater Des 2013, 51:95-104.
58. Xiao X., Liu G.Q., Hu B.F., Zheng X., Wang L.N., Chen S.J., et al. A comparative study on Arrhenius-type constitutive equations and artificial neural network model to predict high-temperature deformation behaviour in 12Cr3WV steel. Comp Mater Sci 2012, 62:227-234.
59. Wang Y., Shao W.Z., Zhen L., Zhang B.Y. Hot deformation behavior of delta-processed superalloy 718. Mater Sci Eng A 2011, 528:3218-3227.
60. Chen X.M., Lin Y.C., Wen D.X., Jiang Y.Q., He M. Dynamic recrystallization behavior of a typical nickel-based superalloy during hot deformation. Mater Des 2014, 57:568-577.
61. Wang Y., Zhen L., Shao W.Z., Yang L., Zhang X.M. Hot working characteristics and dynamic recrystallization of delta-processed superalloy 718. J Alloys Compd 2009, 474:341-346.
62. Lin Y.C., Deng J., Jiang Y.Q., Wen D.X., Liu G. Hot tensile deformation behaviors and fracture characteristics of a typical Ni-based superalloy. Mater Des 2014, 55:949-957.
63. Lin Y.C., Deng J., Jiang Y.Q., Wen D.X., Liu G. Effects of initial δ phase on hot tensile deformation behaviors and fracture characteristics of a typical Ni-based superalloy. Mater Sci Eng A 2014, 598:251-262.
64. Wen D.X., Lin Y.C., Li H.B., Chen X.M., Deng J., Li L.T. Hot deformation behavior and processing map of a typical Ni-based superalloy. Mater Sci Eng A 2014, 591:183-192.
65. Wang K., Li M.Q., Luo J., Li C. Effect of the δ phase on the deformation behavior in isothermal compression of superalloy GH4169. Mater Sci Eng A 2011, 528:4723-4731.
66. Yao Z.H., Wang Q.Y., Zhang M.C., Dong J.X. Microstructure control and prediction of GH738 superalloy during hot deformation. Acta Metall Sin 2011, 47:1591-1599.
67. Sun C.Y., Liu J.R., Li R., Zhang Q.D. Constitutive modeling for elevated temperature flow behavior of Incoloy 800H superalloy. Acta Metall Sin 2011, 47:191-196.
68. Etaati A., Dehghani K., Ebrahimi G.R., Wang H. Predicting the flow stress behavior of Ni-42.5Ti-3Cu during hot deformation using constitutive equations. Met Mater Int 2013, 19:5-9.
69. Ning Y.Q., Yao Z.K., Liang X.M., Liu Y.H. Flow behavior and constitutive model for Ni-20.0Cr-2.5Ti-1.5Nb-1.0Al superalloy compressed below γ'-transus temperature. Mater Sci Eng A 2012, 551:7-12.
70. Cingara A., McQueen H.J. New formula for calculating flow curves from high temperature constitutive data for 300 austenitic steels. J Mater Process Technol 1992, 36:31-42.
71. Frost H.J., Ashby M.F. Deformation-mechanism maps. The plasticity and creep of metals and ceramics 1982, 54-55. Pergamon Press, Oxford.