Dynamic recrystallization during hot deformation of 304 austenitic stainless steel

Journal of Materials Engineering and Performance

Volumn 22, Issue 8, 2013, Pages 2168-2175

  Marchattiwar, A ^a   Sarkar, A ^b   Chakravartty, J K ^b   Kashyap, B P ^a  

^a INDIAN INSTITUTE OF TECHNOLOGY BOMBAY   (India)

^b BHABHA ATOMIC RESEARCH CENTRE   (India)

Author keywords

austenitic Stainless Steel; compression test; dynamic recrystallization; recrystallization kinetics

Indexed keywords

304 AUSTENITIC STAINLESS STEELS; DYNAMIC RECRYSTALLIZATION (DRX); HYPERBOLIC SINE EQUATION; RECRYSTALLIZATION KINETICS; SATURATION STRESS; STRAIN RATE SENSITIVITY; TEMPERATURE RANGE; WORK HARDENING RATE;

ACTIVATION ENERGY; AUSTENITIC STAINLESS STEEL; COMPRESSION TESTING; HOT PRESSING; REGRESSION ANALYSIS; STRAIN HARDENING; STRAIN RATE;

DYNAMIC RECRYSTALLIZATION;

EID: 84880918065     PISSN: 10599495     EISSN: 15441024     Source Type: Journal    
DOI: 10.1007/s11665-013-0496-0     Document Type: Article

References (37)

1. W. Hosford, Mechanical Behavior of Materials, Cambridge University Press, New York, 2005, p 99-120
2. Q.G. Zheng, T. Ying, and Z. Jie, Dynamic Softening Behaviour of AZ80 Magnesium Alloy during Upsetting at Different Temperatures and Strain Rates, Proc. Inst. Mech. Eng., 2010, 224(11), p 1707-1716
3. G.Z. Quan, K.W. Liu, J. Zhou, and B. Chen, Dynamic Softening Behaviors of 7075 Aluminum Alloy, Trans. Nonferrous Met. Soc., 2009, 19(suppl3), p S537-S541.
4. A. Momeni, K. Dehghani, H. Keshmiria, and G.R. Ebrahimi, Hot Deformation Behavior and Microstructural Evolution of a Superaustenitic Stainless Steel, Mater. Sci. Eng., A, 2010, 527(6), p 1605-1611
5. Y.C. Lin, M.S. Chen, and J. Zhong, Constitutive Modeling for Elevated Temperature Flow Behavior of 42CrMo Steel, Comput. Mater. Sci., 2008, 42(3), p 470-477
6. S.I. Kim and Y.C. Yoo, Dynamic Recrystallization Behavior of AISI, 304 Stainless Steel, Mater. Sci. Eng., A, 2001, 311(1-2), p 108-113
7. C.M. Sellars and W.J. McTegart, On the Mechanism of Hot Deformation, Acta Metall., 1966, 14(9), p 1136-1138
8. C. Zener and H. Hollomon, Effect of Strain Rate upon Plastic Flow of Steel, J. Appl. Phys., 1944, 15(1), p 22-32
9. R. Kapoor and J.K. Chakravartty, Characterization of Hot Deformation Behaviour of Zr-2.5Nb in β Phase, J. Nucl. Mater., 2002, 306(2-3), p 126-133
10. S. Venugopal, S.L. Mannan, and Y.V.R.K. Prasad, Optimization of Hot Workability in Stainless Steel-type AISI, 304L using Processing Maps, Metal. Mater. Trans. A, 1992, 23(11), p 3093-3103
11. S. Venugopal, S.L. Mannan, and Y.V.R.K. Prasad, Processing Maps for Hot Working of Commercial Grade Wrought Stainless Steel Type AISI, 304, Mater. Sci. Eng., A, 1994, 177(1-2), p 143-149
12. H.J. McQueen and J.J. Jonas, Recovery and Recrystallisation during High Temperature Deformation, Treatise Mater. Sci. Technol., 1975, 6, p 393-493
13. N.D. Ryan and H.J. McQueen, Comparison of Dynamic Softening in 301, 304, 316 and 317 Stainless Steels, High Temp. Technol., 1990, 8(3), p 185-200
14. J.J. Jonas, X. Quelennec, L. Jiang, and E. Martin, The Avrami Kinetics of Dynamic Recrystallisation, Acta Mater., 2009, 57(9), p 2748-2756
15. J.I. Gutierrez, F.R. Castro, J.J. Urcola, and M. Fuentes, Static Recrystallization Kinetics of Commercial Purity Aluminium after Hot Deformation within the Steady State Regime, Mater. Sci. Eng., A, 1988, 102(1), p 77-84
16. F.J. Humphreys and M. Hatherly, Recrystallization and Related Annealing Phenomena, Pergamon, Oxford, UK, 1996, p 363-392
17. M. Hatherly, A.S. Malin, C.M. Carmichael, F.J. Humphreys, and J. Hirsch, Deformation Processes in Hot Worked Copper and α Brass, Acta Metall., 1986, 34(11), p 2247-2257
18. T. Sakai, M.G. Akben, and J.J. Jonas, Dynamic Recrystallization during the Transient Deformation of a Vanadium Microalloyed Steel, Acta Metall., 1983, 31(4), p 631-642
19. G.H. Akbari, C.M. Sellars, and J.A. Whiteman, Microstructural Development during Warm Rolling of an IF Steel, Acta Mater., 1997, 45(12), p 5047-5058
20. A. Belyakov, K. Tsuzaki, H. Miura, and T. Sakai, Effect of Initial Microstructures on Grain Refinement in a Stainless Steel by Large Strain Deformation, Acta Mater., 2003, 51(3), p 847-861
21. R. Le Gall and J.J. Jonas, Solute Drag Effects during the Dynamic Recrystallization of Nickel, Acta Mater., 1999, 47(17), p 4365-4374
22. H. Yamagata, Y. Ohuchida, N. Saito, and M. Otsuka, Nucleation of New Grains during Discontinuous Dynamic Recrystallization of 99.998 mass% Aluminum at 453 K, Scripta Mater., 2001, 45(9), p 1055-1061
23. A.A. Hameda and L. Blaz, Microstructure of Hot-deformed Cu-3.45 wt.% Ti Alloy, Mater. Sci. Eng., A, 1998, 254(1-2), p 83-89.
24. M. Avrami, Kinetics of Phase Change. I: General Theory, J. Chem. Phys., 1939, 7(12), p 1103-1112
25. M. Avrami, Kinetics of Phase Change. II Transformation-time Relations for Random Distribution of Nuclei, J. Chem. Phys., 1940, 8(2), p 212-224
26. W.A. Johnson and R.F. Mehl, Reaction Kinetics in Processes of Nucleation and Growth, Trans. AIME, 1939, 135, p 416-458
27. M. El Wahabi, L. Gavard, F. Montheillet, J.M. Cabrera, and J.M. Prado, Effect of Initial Grain Size on Dynamic Recrystallization in High Purity Austenitic Stainless Steels, Acta Mater., 2005, 53(17), p 4605-4612
28. M.R. Barnett, G.L. Kelly, and P.D. Hodgson, Predicting the Critical Strain for Dynamic Recrystallization using the Kinetics of Static Recrystallisation, Scripta Mater., 2000, 43(4), p 365-369
29. S.H. Zahiri, C.H.J. Davies, and P.D. Hodgson, A Mechanical Approach to Quantify Dynamic Recrystallization in Polycrystalline Metals, Scripta Mater., 2005, 52(4), p 299-304
30. S.F. Medina and C.A. Hernandez, Modelling Austenite Flow Curves in Low Alloy and Microalloyed Steels, Acta Mater., 1996, 44(1), p 165-171
31. A. Dehghan-Manshadi and P.D. Hodgson, Dynamic Recrystallization of Austenitic Stainless Steel under Multiple Peak Flow Behaviours, ISIJ Int., 2007, 47(12), p 1799-1803
32. M.J. Luton and C.M. Sellars, Dynamic Recrystallization in Nickel and Nickel-Iron Alloys during High Temperature Deformation, Acta Metall., 1969, 17(8), p 1033-1043.
33. A. Dehgan-Manshadi, M.R. Barnett, and P.D. Hodgson, Hot Deformation and Recrystallization of Austenitic Stainless Steel: Part I. Dynamic Recrystallisation, Metal. Mater. Trans. A, 2008, 39(6), p 1359-1370
34. A. Sarkar, J.K. Chakravartty, B. Paul, and A.K. Suri, Kinetics of Dynamic Recrystallization in Cobalt: A Study using the Avrami Relation, Phys. Status Solidi A, 2011, 208(4), p 814-818
35. E.I. Poliak and J.J. Jonas, A One-parmenter Approach to Determining the Critical Conditions for the Initiation of Dynamic Recrystallisation, Acta Mater., 1996, 44(1), p 127-136
36. Y. Estrin and H. Mecking, A Unified Phenomenological Description of Work Hardening and creep based on one-Parameter Models, Acta Metall., 1984, 32(1), p 57-70
37. S. Andiawanto, H. Miura, and T. Sakai, Preferential Occurrence of Dynamic Recrystallisation at Triple Junction in Copper Tri-crystal, J Jpn. Inst. Metals, 2002, 66(7), p 760-766