Cold expansion effect on the fatigue crack growth of Al 6082: Numerical investigation

Structural Engineering and Mechanics

Volumn 49, Issue 2, 2014, Pages 225-235

  Aid, Abdekrim ^a   Semari, Zahar ^a   Benguediab, Mohamed ^b  

^a UNIVERSITÉ DE MASCARA   (Algeria)

^b UNIVERSITY OF SIDI BEL ABBES   (Algeria)

Author keywords

Cold expansion; Crack growth; Fatigue life; Finite element method; Residual stress

Indexed keywords

CRACK PROPAGATION; CRACKS; FATIGUE CRACK PROPAGATION; FINITE ELEMENT METHOD; NONLINEAR ANALYSIS; RESIDUAL STRESSES;

APPLIED STRESS; COLD EXPANSION; COLD EXPANSION EFFECTS; CONSTANT LOADING; EXPERIMENTAL TEST; FEM SIMULATIONS; NUMERICAL INVESTIGATIONS; RESIDUAL STRESS FIELDS;

FATIGUE OF MATERIALS;

EID: 84893605885     PISSN: 12254568     EISSN: None     Source Type: Journal    
DOI: 10.12989/sem.2014.49.2.225     Document Type: Article

References (31)

1. ANSYS (2007), User's Manuals, Revision 11.0.
2. Amrouche, A., Mesmacque, G., Garcia, S. and Talha, A. (2003), "Cold expansion effect on the initiation and the propagation of the fatigue crack", Int. J. Fatigue, 25, 949-954.
3. Amrouche, A., Su, M., Aid, A. and Mesmacque, G. (2008), "Numerical study of the optimum degree of cold expansion: Application for the pre-cracked specimen with the expanded hole at the crack tip", J. Mater. Proce. Technol., 197, 250-254.
4. Bendouba, M., Aid, A., Benhamena, A. and Benguediab, M. (2012), "Effect of hardening induced by cold expansion on damage fatigue accumulation and life assessment of aluminum alloy 6082 T6", Mater. Res., 15(6), 1-5.
5. Bertrand, J. and Fabrice, C. (2005), "Prévision de la fissuration par fatigue en présence de contraintes ré siduelles", Méc. Indust., 6, 75-88.
6. Chakherlou, T.N. and Vogwell, J. (2003), "The effect of cold expansion on improving the fatigue life of fastener holes", Eng. Fail. Anal., 10, 13-24.
7. Chandawanich, N. and Sharpe, Jr. W.N. (1979), "An experimental study of fatigue crack initiation and growth from cold worked holes", Eng. Fract. Mech., 11, 609-620.
8. Chobin, M., Anggit, M., Kazuo, K., Yoshiki, I. and Akihide, S. (2009), "Crack growth arrest by redirecting crack growth by drilling stop holes and inserting pins into them", Eng. Fail. Anal., 16, 475-483.
9. De Matos, P.F.P., Moreira, P.M.G.P., Nedbal, I. and de Castro, P.M.S.T. (2005), "Reconstitution of fatigue crack growth in Al-alloy 2024-T3 open-hole specimens using microfractographic techniques", Eng. Fract. Mech., 72, 2232-2246.
10. Fukuda, S. and Tsuruta, Y. (1978), "An experimental study of redistribution of welding residual stress", Trans. JWRI, 7, 67-72.
11. Gopalakrishna, H.D., Narasimha, M.H.N., Krishna, M., Vinod, M.S. and Suresh, A.V. (2010), "Cold expansion of holes and resulting fatigue life enhancement and residual stresses in Al2024T3 alloy-an experimental study", Eng. Fail. Anal., 17, 361-368.
12. Keith, W.J. and Martin, L.D. (2009), "Predicting fatigue crack growth from a pre-yielded hole", Int. J. Fatigue, 31, 223-230.
13. Kusko, C.S., DuPont, J.N. and Marder, A.R. (2004), "Influence of stress ratio on fatigue crack propagation behaviour of stainless steel welds", Weld. J., 83, 59-64.
14. Kujawski, D. (2001), "Enhanced model of partial crack closure for correlation of R-ratio effects in aluminum alloys", Int. J. Fatigue, 23, 95-102.
15. Lacarac, V.D., Smith, D.J. and Pavier, M.J. (2001), "The effect of cold expansion on fatigue crack growth from open holes at room and high temperature", Int. J. Fatigue, 23, 161-170.
16. Lam, Y.C and Lian, K.S. (1989), "Effect of residual stress and its redistribution on fatigue crack growth", Theo. Appl. Fract. Mech., 12, 59-66.
17. LaRue, J.E. (2005), "The influence of residual stress on fatigue crack growth", Master Thesis, Mississippi State University.
18. LaRue, J.E. and Daniewicz, S.R. (2007), "Predicting the effect of residual stress on fatigue crack growth", Int. J. Fatigue, 29, 508-515.
19. Liu, Y.S., Shao, Z.J., Liu, J. and Yue, Z.F. (2010), "Finite element method and experimental investigation on the residual stress fields and fatigue performance of cold expansion hole", Mater. Des., 31(3), 1208-1215.
20. Man, S. (2005), "Etude de l'influence et de l'optimisation du degré d'expansion à froid dans les mécanismes de réamorçage d'une fissure: Etude numérique et expérimentale", Doctoral Thesis, Université des Sciences et Technologies de Lille.
21. Newman, J.A. (2000), "The effects of load ratio on threshold fatigue crack growth of aluminum alloys", Doctoral Thesis, Virginia University.
22. Nigrelli, V. and Pasta, S. (2008), "Finite-element simulation of residual stress induced by split-sleeve cold-expansion process of holes", J. Mater. Proc. Technol., 205, 290-296
23. Pasta, S. (2007), "Fatigue crack propagation from a cold-worked hole", Eng. Fract. Mech, 74, 1525-1538.
24. Ramesh, N. (2005), "Fatigue crack growth under residual stresses around holes", Master Thesis, Mississippi State University.
25. Rich, D.L. and Impellizzeri, L.F. (1977), "Fatigue analysis of cold-worked and interference fit fastener holes. Cyclic stress-strain and plastic deformation aspect of fatigue crack growth", Am. Soc. Test Mat., ASTM STP, 637, 153-175.
26. Stefanescu, D., Santisteban, J.R., Edwards, L. and Fitzpatrick, M.E. (2004), "Residual stress measurement and fatigue crack growth prediction after cold expansion of cracked fastener holes", J. Aerosp. Eng., 17(91), 0893-1321.
27. Todoroki, A. and Kobayashi, H. (1991), "Prediction of fatigue crack growth rate in residual stress fields", Key Eng. Mat. Fract. Strength, 367, 51-52.
28. Toparli, M. and Aksoy, T. (1997), "Effect of the residual stresses on the fatigue crack growth behaviour at fastener holes", Mater. Sci. Eng. A, 225, 196-203.
29. Underwood, J.H., Pook, L.P. and Sharples, J.K. (1977), "Flaw growth and fracture", Am. Soc. Test Matm, ASTM STP, 631, 112-120.
30. Wang, Z. and Zhang, X. (2003), "Predicting fatigue crack growth life for cold-worked holes based on existing closed-form residual stress models", Int. J. Fatigue, 25, 1285-1291.
31. Zhang, X. and Wang, Z. (2003), "Fatigue life improvement in fatigue-aged fastener holes using the cold expansion technique", Int. J. Fatigue, 25, 1249-1257.