Preparation of tubular porous polycaprolactone scaffold by precoagulation evaporation (PCE) method

Journal of Biomaterials and Tissue Engineering

Volumn 3, Issue 5, 2013, Pages 523-533

  Gupta, Bhuvanesh ^a   Patra, Shamayita ^a   Ray, Alok R ^a  

^a INDIAN INSTITUTE OF TECHNOLOGY DELHI   (India)

Author keywords

Polycaprolactone; Precoagulation evaporation (PCE) method; Scaffold; Tubular

Indexed keywords

MOLECULAR SCAFFOLD; TUBULAR POROUS POLYCAPROLACTONE SCAFFOLD; UNCLASSIFIED DRUG;

ARTICLE; DIFFERENTIAL SCANNING CALORIMETRY; EVAPORATION; HEAT TREATMENT; IN VITRO STUDY; MECHANICS; PHYSICAL PHENOMENA; POLYMERIZATION; POROSITY; PRECOAGULATION EVAPORATION; QUANTITATIVE ANALYSIS; SCANNING ELECTRON MICROSCOPY; SURFACE PROPERTY; SUTURE RETENTION STRENGTH; TENSILE STRENGTH; X RAY DIFFRACTION;

EID: 84891587166     PISSN: 21579083     EISSN: 21579091     Source Type: Journal    
DOI: 10.1166/jbt.2013.1116     Document Type: Article

References (52)

1. W. M. Huang, B. Yang, Y. Zhao, and Z. Ding, Thermo-moisture responsive polyurethane shape-memory polymer and composites: A review. J. Mater. Chem. 20, 3367, (2010).
2. G. S. Bhat, P. Gulgunje, and K. Desai, Developments of structure and properties during thermal calendering of polylactic acid (PLA) fiber webs. Express Polym. Lett. 2, 49 (2008).
3. Z.-M. Huang, Y.-Z. Zhang, M. Kotaki, and S. Ramakrishna, A review on polymer nanofibers by electrospinning and their applications in nanocomposites. Composites Sci. Tech. 63, 2223 (2003).
4. S. Zhang, S. Zhou, B. You, and L. Wu, Fabrication of ordered porous polymer film via a one-step strategy and its formation mechanism. Macromolecules 42, 3591 (2009).
5. J. A. Champion, Y. K. Katare, and S. Mitragotri, Making polymeric micro-and nanoparticlesof complex shapes. Proc. Natl. Acad. Sci. 104 11901 (2007).
6. A. G. A. Coombes, E. C. Lavelle, P. G. Jenkins, and S. S. Davis, Single dose, polymeric, microparticle-based vaccines: The influence of formulation conditions on the magnitude and duration of the immune response to a protein antigen. Vaccine 14, 1429 (1996).
7. S. Wolpert, Aldehyde activated microporous membranes. J. Membr. Sci. 132, 23 (1997).
8. E. P. Jacobs and W. D. Leukes, Formation of an externally unskinned polysulfone capillary membrane. J. Membr. Sci. 121, 149 (1996).
9. S. Jons, P. Ries, and C. J. McDonald, Porous latex composite membranes: Fabrication and properties. J. Membr. Sci. 155, 79 (1999).
10. X. Hu, H. Shen, F. Yang, J. Bei, and S. Wang, Preparation and cell affinity of microtubular orientation-structured PLGA(70/30) blood vessel scaffold. Biomaterials 29, 3128 (2008).
11. K. Ulubayram, A. N. Cakar, P. Korkusuz, C. Ertan, and N. Hasirci, EGF containing gelatin-based wound dressings. Biomaterials 22, 1345 (2001).
12. K. P. T. Sudheesh, S. Abhilash, K. Manzoor, S. V. Nair, H. Tamura, and R. Jayakumar, Preparation and characterization of novel-chitin/nanosilver composite scaffolds for wound dressing applications. Carbohydr. Polym. 80, 761 (2010).
13. R. Langer and J. P. Vacanti, Tissue engineering. Science 260, 920 (1993).
14. I.-Y. Kim, S.-J. Seo, H.-S. Moon, M.-K. Yoo, I.-Y. Park, B.-C. Kim, and C.-S. Cho, Chitosan and its derivatives for tissue engineering applications. Biotechnol. Adv. 26, 1 (2008).
15. Y. Cao, G. Mitchell, A. Messina, L. Price, E. Thompson, A. Penington, W. Morrison, A. O. G. Stevens, and J. Cooper-White, The influence of architecture on degradation and tissue ingrowth into three-dimensional poly(lactic-co-glycolic acid) scaffolds in vitro and in vivo. Biomaterials 27, 2854 (2006).
16. D. D. Swartz, J. A. Russell, and S. T. Andreadis, Engineering of fibrin-based functional and implantable small-diameter blood vessels. Am. J. Physiol. Heart Circ. Physiol. 288, H1451 (2005).
17. M. Chaouat, C. L. Visage, A. Autissier, F. Chaubet, and D. Letourneur, The evaluation of a small-diameter polysaccharidebased arterial graft in rats. Biomaterials 27, 5546 (2006).
18. A. Autissier, D. Letourneur, and C. L. Visage, Pullulan-based hydrogel for smooth muscle cell culture. J. Biomed. Mat. Res. 82A, 336 (2007).
19. A. S. Juan, G. Ducrocq, H. Hlawaty, I. Bataille, E. Guénin, D. Letourneur, and L. J. Feldman, Tubular cationized pullulan hydrogels as local reservoirs for plasmid DNA. J. Biomed. Mat. Res. 83A, 819 (2007).
20. P. B. Malafaya, G. A. Silva, and R. L. Reis, Natural-origin polymers as carriers and scaffolds for biomolecules and cell delivery in tissue engineering applications. Adv. Drug. Deliver. Rev. 59, 207 (2007).
21. M. P. Linnes, B. D. Ratner, and C. M. Giachelli, A fibrinogen-based precision microporous scaffold for tissue engineering. Biomaterials 28, 5298 (2007).
22. J. C. Reichert, A. Heymer, A. Berner, J. Eulert, and U. Nöth, Fabrication of polycaprolactone collagen hydrogel constructs seeded with mesenchymal stem cells for bone regeneration. Biomed. Mater. 4, 065001 (2009).
23. S. H. Barbanti, C. A. C. Zavaglia, and E. A. R. Duek, Effect of salt leaching on PCL and PLGA(50/50) resorbable scaffolds. Mat. Res. 11, 75 (2008).
24. H. Tungtasana, S. Shuangshoti, S. Shuangshoti, S. Kanokpanont, D. L. Kaplan, T. Bunaprasert, and S. Damrongsakkul, Tissue response and biodegradation of composite scaffolds prepared from Thai silk fibroin, gelatin and hydroxyapatite. J. Mater. Sci. Mater. Med. 21, 3151 (2010).
25. M. S. Widmer, P. K. Gupta, L. Lu, R. K. Meszlenyi, G. R. D. Evans, K. Brandt, T. Savel, A. Gurlek, C. W. Patrick, Jr., and A. G. Mikos, Manufacture of porous biodegradable polymer conduits by an extrusion process for guided tissue regeneration. Biomaterials 19, 1945 (1998).
26. Y. Song, F. Yang, J. A. Jansen, M. M. J. Kamphuis, Z. Zhang, A. A. Poot, I. Vermes, D. W. Grijpma, and J. Feijen, Poly(trimethylene carbonate) porous tubular structures made by electro-spinning. J. Contr. Rel. 132, e79 (2008).
27. T. Uchida, S. Ikeda, H. Oura, M. Tada, T. Nakano, T. Fukuda, T. Matsuda, M. Negoro, and F. Arai, Development of biodegradable scaffolds based on patient-specific arterial configuration. J. Biotechnol. 133, 213 (2008).
28. J. Reignier and M. A. Huneault, Preparation of interconnected poly(3-caprolactone) porous scaffolds by a combination of polymer and salt particulate leaching. Polymer 47, 4703 (2006).
29. R. M. Allaf and I. V. Rivero, Fabrication and characterization of interconnected porous biodegradable poly(ε-caprolactone) load bearing scaffolds. J. Mater. Sci. Mater. Med. 22, 1843 (2011).
30. Q. Hou, D. W. Grijpma, and J. Feijen, Porous polymeric structures for tissue engineering prepared by a coagulation, compression moulding and salt leaching technique. Biomaterials 24, 1937 (2003).
31. H. Tsuji and T. Ishizaka, Porous biodegradable polyesters. II. Physical properties, morphology, and enzymatic and alkaline hydrolysis of porous poly(-caprolactone) films. J. Appl. Polym. Sci. 80, 2281 (2001).
32. L. Soletti, Y. Hong, J. Guan, J. J. Stankus, M. S. El-Kurdi, W. R. Wagner, and D. A. Vorp, A bilayered elastomeric scaffold for tissue engineering of small diameter vascular grafts. Acta Biomater. 6, 110 (2010).
33. M. Ho, P. Kuo, H. Hsieh, T. Hsien, L. Hou, J. Lai, and D. Wang, Preparation of porous scaffolds by using freeze-extraction and freeze-gelation methods. Biomaterials 25, 129 (2004).
34. Q. Hou, D. W. Grijpma, and J. Feijen, Preparation of interconnected highly porous polymeric structures by a replication and freeze-drying process. J. Biomed. Mater. Res. Part B Appl. Biomater. 67, 732 (2003).
35. K. Nayani, H. Katepalli, C. S. Sharma, A. Sharma, S. Patil, and R. Venkataraghavan, Electrospinning combined with nonsolventinduced phase separation to fabricate highly porous and hollow submicrometer polymer fibers. Ind. Eng. Chem. Res. 51, 1761 (2012).
36. J. P. Kennedy, S. P. McCandless, R. A. Lasher, and R. W. Hitchcock, The mechanically enhanced phase separation of sprayed polyurethane scaffolds and their effect on the alignment of fibroblasts. Biomaterials 31, 1126 (2010).
37. A. G. A. Coombes, S. C. Rizzi, M. Williamson, J. E. Barralet, S. Downes, and W. A. Wallace, Precipitation casting of polycaprolactone for applications in tissue engineering and drug delivery. Biomaterials 25, 315 (2004).
38. M. T. Khorasani and S. Shorgashti, Fabrication of microporous polyurethane by spray phase inversion method as small diameter vascular grafts material. J. Biomed. Mater. Res. A 77, 253 (2006).
39. D. S. Deshpande, R. Bajpai, and A. K. Bajpai, Synthesis and chatacterization of acrylonitrile incorporated pva based semi-inter penetrating polymeric networks. Int. J. Chem. Res. 3, 74 (2011).
40. G. Konig, T. N. McAllister, N. Dusserre, S. A. Garrido, C. Iyican, A. Marini, A. Fiorillo, H. Avila, W. Wystrychowski, K. Zagalski, M. Maruszewski, A. L. Jones, L. Cierpka, L. M. de la Fuente, and N. L'Heureux, Mechanical properties of completely autologous human tissue engineered blood vessels compared to human saphenous vein and mammary artery. Biomaterials 30, 1542 (2009).
41. M. A. Woodruff and D. W. Hutmacher, The return of a forgotten polymer-polycaprolactone in the 21st century. Prog. Polym. Sci. 35, 1217 (2010).
42. F. L. Mi, S. S. Shyu, Y. B. Wu, S. T. Lee, J. Y. Shyong, and R. N. Huang, Fabrication and characterization of a sponge-like asymmetric chitosan membrane as a wound dressing. Biomaterials 22, 165 (2001).
43. P. van de Witte, P. J. Dijkstra, J. W. A. van den Berg, and J. Feijen, Phase separation processes in polymer solutions in relation to membrane formation. J. Membr. Sci. 117, 1 (1996).
44. Y. Termonia, Fundamentals of polymer coagulation. J. Polym. Sci. Part B: Polym. Phys. 33, 279 (1995).
45. A. Baji, S. Wong, T. Liu, T. Li, and T. S. Srivastan, Morphological and X-ray diffraction studies of crystalline hydroxyapatite-reinforced polycaprolactone. J. Biomed. Mater. Res. Part B Appl. Biomater. 81, 343 (2007).
46. B. Gupta, S. Patra, and A. R. Ray, Preparation of porous polycaprolactone tubular matrix by salt leaching process. J. Appl. Polym. Sci. 126, 1505 (2012).
47. H. Bittiger, R. H. Marchessault, and W. D. Niegisch, Crystal structure of poly-ε-caprolactone. Acta Cryst. B 26, 1923 (1970).
48. Y. Chatini, Y. Okita, H. Tadokoro, and Y. Yamashita, Structural studies of polyesters. III. Crystal structure of poly-ε-caprolactone. Polymer J. 1, 555 (1970).
49. X. Bu, Y. Yan, Z. Zhang, X. Gu, M. Wang, A. Gong, X. Sun, Y. Cui, and Y. J. Zeng, Properties of extracellular matrix-like scaffolds for the growth and differentiation of endothelial progenitor cells. J. Surg. Res. 164, 50 (2010).
50. S. Chung, N. P. Ingle, G. A. Montero, S. H. Kim, and M. W. King, Bioresorbable elastomeric vascular tissue engineering scaffolds via melt spinning and electrospinning. Acta Biomater. 6, 1958 (2010).
51. Y. Song, M. M. J. Kamphuis, Z. Zhang, L. M. Th. Sterk, I. Vermes, A. A. Poot, J. Feijen, and D. W. Grijpma, Flexible and elastic porous poly(trimethylene carbonate) structures for use in vascular tissue engineering. Acta Biomater. 6, 1269 (2010).
52. S. D. Wang, Y. Z. Zhang, G. B. Yin, H. W. Wang, and Z. H. Dong, Fabrication of a composite vascular scaffold using electrospinning technology. Mat. Sci. Eng. C 30, 670 (2010).