Infrared Thermal Imaging: Fundamentals, Research and Applications

Infrared Thermal Imaging: Fundamentals, Research and Applications

Volumn , Issue , 2010, Pages

  Vollmer, Michael ^a   Möllmann, Klaus Peter ^a  

^a BRANDENBURG UNIVERSITY OF APPLIED SCIENCES   (Germany)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 84891584970     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1002/9783527630868     Document Type: Book

References (418)

1. Wolfe, W.L. and Zissis, G.J. (eds) (1993) The Infrared Handbook, revised edition 4th printing, The Infrared Information Analysis Center, Environmental Research Institute of Michigan.
2. Bass, M. (ed.) (1995) Handbook of Optics, Sponsored by the Optical Society of America, vol. 1, McGraw Hill, Inc.
3. Dakin, J.R. and Brown, R.G.W. (eds) (2006) Handbook of Optoelectronics, vol. 1, Taylor and Francis, New York.
4. (2005) The Photonics Handbook, Book 3: The Photonics Directory, 51st edn, Laurin Publishing Company, Pittsfield.
5. Gross, H. (ed.) (2005) Handbook of Optical Systems, vol. 1, Wiley-VCH Verlag GmbH, Weinheim.
6. Gross, H. (ed.) (2008) Handbook of Optical Systems, vol. 4, Wiley-VCH Verlag GmbH, Weinheim.
7. Bentley, R.E. (ed.) (1998) Handbook of Temperature Measurement, Temperature and Humidity Measurement, Vol. 1, Springer, Singapore.
8. Michalski, L., Eckersdorf, K., Kucharski, J., and McGhee, J. (2001) Temperature Measurement, 2nd edn, John Wiley & Sons, Ltd, Chichester.
9. Hermann, K. and Walther, L. (eds) (1990) Wissensspeicher Infrarottechnik (in German), Fachbuchverlag, Leipzig.
10. Dereniak, E.L. and Boreman, G.D. (1996) Infrared Detectors and Systems, John Wiley & Sons, Inc., New York.
11. Holst, G.C. (1993) Testing and Evaluation of Infrared Imaging Systems, JCD Publishing Company, Maitland.
12. Jha, A.R. (2000) Infrared Technology: Applications to Electro-Optics, Photonic Devices, and Sensors, John Wiley & Sons, Inc., New York.
13. Schlessinger, M. (1995) Infrared Technology Fundamentals, 2nd edn, Marcel Dekker, New York.
14. Schneider, H. and Liu, H.C. (2007) Quantum Well Infrared Photodetectors, Springer Series Optical Science, vol. 126, Springer, Heidelberg.
15. Schuster, N. and Kolobrodov, V.G. (2000) Infrarotthermographie, Wiley-VCH Verlag GmbH, Berlin.
16. Wolfe, W.L. (1996) Introduction to infrared system design, Tutorial Texts in Optical Engineering, vol. TT24, SPIE Press, Bellingham and Washington, DC.
17. Savage, J.A. (1985) Infrared Optical Materials and Their Antireflection Coatings, Adam Hilger, Bristol.
18. Palik, E.P. (ed.) (1985) Handbook of Optical Constants of Solids, vol. 1, Academic Press, Boston; vol. 2, (1991); vol. 3, (1998).
19. Baehr, H.D. and Karl, S. (2006) Heat and Mass Transfer, 2nd revised edn, Springer, Berlin and New York.
20. Incropera, F.P. and DeWitt, D.P. (1996) Fundamentals of Heat and Mass Transfer, 4th edn, John Wiley & Sons, Inc., New York.
21. Richards, A. (2001) Alien Vision, Exploring the Electromagnetic Spectrum with Imaging Technology, SPIE Press, Bellingham and Washington, DC.
22. Kaplan, H. (1999) Practical applications of infrared thermal sensing and imaging equipment, Tutorial Texts in Optical Engineering, vol. T T34, 2nd edn, SPIE Press, Bellingham.
23. Holst, G.C. (2000) Common Sense Approach to Thermal Imaging, SPIE Optical Engineering Press, Washington, DC.
24. Moore, P.O. (ed.) (2001) Nondestructive Testing Handbook, Infrared and Thermal Testing, vol. 3, 3rd edn, American Society for Nondestructive Testing, Inc., Columbus.
25. Hecht, E. (1998) Optics, 3rd edn, Addison-Wesley, Reading.
26. Falk, D.S., Brill, D.R., and Stork, D.G. (1986) Seeing the Light: Optics in Nature, Photography, Color Vision, and Holography, Harper & Row, New York.
27. Pedrotti, F. and Pedrotti, L. (1993) Introduction to Optics, 2nd edn, Prentice Hall, Upper Saddle River.
28. Palmer, J.M. (1993) Getting intense on intensity. Metrologia, 30, 371-372.
29. Soffer, B.H. and Lynch, D.K. (1999) Some paradoxes, errors, and resolutions concerning the spectral optimization of human vision. Am. J. Phys., 67, 946-953.
30. De Witt, D.P. and Nutter, G.D. (eds) (1988) Theory and Practice of Radiation Thermometry, John Wiley & Sons, Inc., New York.
31. Fronapfel, E.L. and Stolz, B.-J. (2006) Emissivity measurements of common construction materials. Inframation 2006, Proceedings vol. 7, pp. 13-21.
32. Kanayama, K (1972) Apparent directional emittance of V-groove and circular-groove rough surfaces. Heat Transfer Jpn. Res., 1 (1), 11-22.
33. deMonte, J. (2008) Guess the real world emittance. Inframation 2008, Proceedings vol. 9, pp. 111-124.
34. Cronholm, M. (2003) Geometry effects: hedging your bet on emissivity. Inframation 2003, Proceedings vol. 4, pp. 55-68.
35. Hartmann, J. and Fischer, J. (1999) Radiator standards for accurate IR calibrations in remote sensing based on heatpipe blackbodies. Proceedings of the EUROPTO Conference Environmental Sensing and Applications, SPIE vol. 3821, pp. 395-403.
36. Henke, S., Karsẗadt, D., M̈ollmann, K.P., Pinno, F., and Vollmer, M. (2004) Challenges in infrared imaging: low emissivities of hot gases, metals, and metallic cavities. Inframation 2004, Proceedings vol. 5, pp. 355-363.
37. Madding, R.P. (2004) IR window transmittance temperature dependence. Inframation 2004, Proceedings vol. 5, pp. 161-169.
38. Richards, A. and Johnson, G. (2005) Radiometric calibration of infrared cameras accounting for atmospheric path effects, Thermosense XXVII, Proceedings of SPIE, Vol. 5782 (eds G.R. Peacock, D.D. Burleigh, and J.J. Miles), SPIE Press, Bellingham, pp. 19-28.
39. Vollmer, M., M̈ollmann, K.-P., and Pinno, F. (2007) Looking through matter: quantitative IR imaging when observing through IR windows. Inframation 2007, Proceedings vol. 8, pp. 109-127.
40. Kaiser, N. and Pulker, H.K. (eds) (2003) Optical Interference Coatings, Springer, Berlin and Heidelberg.
41. Bach, H. and Krause, D. (eds) (1997) Thin Films on Glass, Springer, Berlin and Heidelberg.
42. www.thinfilmcenter.com (2010).
43. www.spectrogon.com (2010).
44. Hudson, R.D. and Hudson, J.W. (eds) (1975) Infrared Detectors, John Wiley & Sons, Inc., Dowden, Hutchinson, and Ross.
45. Lutz, G. (1999) Semiconductor Radiation Detectors, Springer, Berlin, Heidelberg and New York.
46. Dereniak, E.L. and Boreman, G.D. (1996) Infrared Detectors and Systems, John Wiley & Sons, Inc.
47. Wolfe, W.L. and Zissis G.J. (eds) (1993) The Infrared Handbook, Infrared Information Analysis Center, Environmental Research Institute of Michigan.
48. Kingston, R.H. (1978) Detection of optical and infrared radiation, Springer Series in Optical Sciences, Springer-Verlag, Berlin, Heidelberg and New York.
49. Rogalski, A. and Chrzanowski, K. (2002) Infrared devices and techniques. Opto-Electron. Rev., 10 (2), 111-136.
50. Li, B., Huang, S., and Zhang, X. (2004) Transient mechanical and electrical properties of uncooled resistive microbolometer focal plane arrays; Infrared detector materials and devices. Proceedings of SPIE, vol. 5564, pp. 123-132.
51. Bonani, F. and Ghigne, G. (2001) Noise in Semiconductor Devices, Sprinter, Berlin, Heidelberg and New York.
52. Capper, P. and Elliot, C.T. (eds) (2001) Infrared Detectors and Emitters: Material and Devices, Kluwer Academic Publishers.
53. Gunapala, S., Bandara, S., Bock, J., Ressler, M., Liu, J., Mumolo, J., Rafol, S., Werner, M., and Cardimona, D. (2002) GaAs/AlGaAs based Multi-Quantum well infrared detector arrays for Low-Background applications. Proceedings of SPIE, vol. 4823, pp. 80-87.
54. Hudson, R.D. (1969) Infrared Systems Engineering, John Wiley & Sons, Inc.
55. Ryzhii, V. (2003) Intersubband Infrared Photodetectors, Selected Topics in Electronics and Systems, vol. 27, World Scientific Publishing Co. Pvt. Ltd.
56. Bandara, S.V., Gunapala, S., Rafol, S., Ting, D., Liu, J., Mugolo, J., Trinh, T., Liu, A.W.K., and Fastenau, J.M. (2001) Quantum well infrared photodetectors for low background applications. Infrared Phys. Technol., 42 (3-5), 237-242.
57. Rogalski, A. (1994) GaAs/AlGaAs quantum well infrared photoconductors versus HgCdTe photodiodes for Long-Wavelength infrared applications. Proceedings of SPIE, Vol. 2225, pp. 118-129.
58. Soibel, A., Bandara, S., Ting, D., Liu, J., Mumolo, J., Rafol, S., Johnson, W., Wilson, D., and Gunapala, S. (2009) A super-pixel QWIP focal plane array for imaging multiple waveband sensor. Infrared Phys. Technol., 52(6), pp. 403-407.
59. Simolon, B., Aziz, N., Cogan, S., Kurth, E., Lam, S., Petronio, S., Woolaway, J., Bandara, S., Gunapala, S., and Mumolo, J. (2009) High performance two-color one megapixel cmos roic for qwip detectors. Infrared Phys. Technol., pp. 52(6), pp. 391-394.
60. Holst, G.C. (1993) Testing and Evaluation of Infrared Imaging Systems, JCD Publishing Company.
61. Holst, G.C. (2000) Common Sense Approach to Thermal Imaging, SPIE Press, Bellingham.
62. http://www.flir.com (2010).
63. http://www.laser2000.de (2010).
64. http://www.raytek.com (2010).
65. http://www.ircon.com (2010).
66. Milton, A.F., Barone, F.R., and Kruer, M.R. (1985) Influence of nonuniformity on infrared focal plane array performance. Opt. Eng., 24 (5), 885-862.
67. Lau, J.H. (ed.) (1995) Flip Chip Technologies, McGraw-Hill Inc.
68. Kruse, P.W. (2002) Uncooled Thermal Imaging - Arrays, Systems and Applications, SPIE Press, Bellingham and Washington, DC.
69. http://www.ulis-ir.com (2010).
70. (2009) The Ultimate Infrared Handbook for R&D Professionals, FLIR Systems Inc.
71. Rowe, D.M. (ed.) (1995) CRC Handbook of Thermoelectrics, CRC Press.
72. Organ, A.J. (2005) Stirling and Pulse-tube Cryo-coolers, Professional Engineering Publishing, Antony Rowe Ltd.
73. Chrzanowski, K. (2002) Evaluation of commercial thermal cameras in quality systems. Opt. Eng., 41(10), pp. 2556-2567.
74. Sousk, S., O'Shea, P., and Van Hodgkin (2004) Measurement of uncooled thermal imager noise. Infrared Imaging Systems: Design, Analysis, Modeling and Testing XV, SPIE vol. 5407, pp. 1-7.
75. Levesque, P., Brémond, P., Lasserre, J.-L., Paupert, A., and Balageas, D.L. (2005) Performance of FPA IR cameras and their improvement by time, space and data processing. QUIRT-Quant. Infrared Thermography J., 2 (1), 97-111.
76. DeWitt, D.P. and Nutter, G.D. (1989) Theory and Practice of Radiation Thermometry, John Wiley & Sons, Inc.
77. ASTM E 1213-2002. Standard Test Method for Minimum Resolvable Temperature Difference for Thermal Imaging Systems 2002.
78. ASTM E 1311-2002. Standard Test Method for Minimum Detectable Temperature Difference for Thermal Imaging Systems 2002.
79. De Witt, D.P. and Nutter, G.D. (1989) Theory and Practice of Radiation Thermometry, 2007 Proceedings, John Wiley & Sons Inc., pp. 129-139.
80. www.spectrogon.com. (2010).
81. www.schott.com. (2010).
82. Hunter, G.B., Allemand, C.D., and Eagar, T.W. (1984) An improved method for multi-wavelength pyrometry. Thermosense VII, Proceedings of SPIE, vol. 520, pp. 40-46.
83. Hunter, G.B., Allemand, C.D., and Eagar, T.W. (1986) Prototype device for multiwavelength pyrometry. Opt. Eng., 25 (11), 1223-1231.
84. Inagaki, T. and Okamoto, Y. (1994) Temperature measurement and radiometer pseudo gray-body approximation. Thermosense XVI, Proceedings of SPIE, vol. 2245 (34), pp. 231-240.
85. Thevenet, J., Siroux, M., and Desmet, B. (2008) Brake disc surface temperature measurement using a fiber optic two-color pyrometer. 9th International Conference on Quantitative InfraRed Thermography, July 2-5, 2008, Krakow.
86. Coates, P.B. (1988) The least-squares approach to multi-wavelength pyrometry. High Temp.-High Press., 20, 433-441.
87. Saunders, P. (2000) Reflection errors and uncertainties for dual and multiwavelength pyrometers. High Temp.-High Press., 32, 239-249.
88. Neuer, G., Fiessler, L., Groll, M., and Schreiber, E. (1992) in Temperature: its Measurement and Control in Science and Industry, vol. 4 (ed. J.F. Schooley), American Institute of Physics, New York, pp. 787-789.
89. Svet, D.Ya. (2003) in Temperature: its Measurement and Control in Science and Industry, vol. 7 (ed. D.C. Ripple), American Institute of Physics, New York, pp. 681-686.
90. Peacock, G.R. (2003) in Temperature: its Measurement and Control in Science and Industry, vol. 7 (ed. D.C. Ripple), American Institute of Physics, New York, pp. 789-793.
91. Peacock, G.R. (2003) in Temperature: its Measurement and Control in Science and Industry, vol. 7 (ed. D.C. Ripple), American Institute of Physics, New York, pp. 813-817.
92. Gibson, G.C., DeWitt, D.P., and Sorrell, F.Y. (1992) In-process temperature measurement of silicon wafers. Temp.: Meas. Control Sci. Ind., 6 (Part 2), 1123-1127.
93. Kourous, H., Shabestari, B.N., Luster, S., and Sacha, J. (1998) On-line industrial thermography of Die Casting tooling using dual-wavelength IR imaging. Thermosense XX, Proceedings of SPIE, vol. 3361, pp. 218-227.
94. Holst, G.C. (2000) Common Sense Approach to Thermal Imaging, SPIE Press, Bellingham.
95. Williams, G.M. and Barter, A. (2006) Dual-Band MWIR/LWIR Radiometer for absolute temperature measurements. Thermosense XXVIII, Proceedings of SPIE, vol. 6205.
96. Khan, M.S., Washer, G.A., and Chase, S.B. (1998) Evaluation of dual-band infrared thermography system for bridge deck delamination surveys. Proceedings of SPIE, vol. 3400, pp. 224-235.
97. Moropoulou, A., Avdelidis, N.P., Koui, M., and Kanellopoulos, N.K. (2000) Dual band infrared thermography as a NDT tool for the characterization of the building materials and conservation performance in historic structures. MRS Fall Meeting: Nondestructive Methods for Materials Characterization, November 29-30 1999, Boston, vol. 591, Publication Materials Research Society, Pittsburgh, pp. 169-174.
98. Beecken, B.P., LeVan, P.D., and Todt, B.J. (2007) Demonstration of a dualband IR imaging spectrometer. Proceedings of SPIE, vol. 6660, Infrared Systems and Photoelectronic Technology II, pp. 666004.1-666004.11.
99. Beecken, B.P., LeVan, P.D., Lindh, C.W., and Johnson, R.S. (2008) Progress on characterization of a dualband IR imaging spectrometer. Proceedings of SPIE, vol. 6940, Infrared Technology and Applications XXXIV, pp. 69401R-69401R-9.
100. Farley, V., Belzile, C., Chamberland, M., Legault, J.-F., and Schwantes, K.R. (2004) Development and testing of a hyper-spectral imaging instrument for field spectroscopy. Proceedings of SPIE, vol. 5546, pp. 29-36.
101. FIRST Hyper-Cam Datasheet, Telops Inc., Quebec. www.telops.com. (2010).
102. Kauppinen, J. and Partanen, J. (2001) Fourier Transformations in Spectroscopy, Wiley-VCH Verlag GmbH, Berlin.
103. Bell, R.J. (1972) Introductory Fourier Transform Spectroscopy, Academic Press, New York and London.
104. Moore, E.A., Gross, K.C., Bowen, S.J., Perram, G.P., Chamberland, M., Farley, V., Gagnon, J.-P., Lagueux, P., and Villemaire, A. (2009) Characterizing and overcoming spectral artifacts in imaging Fourier transform spectroscopy of turbulent exhaust plumes. Proceedings of SPIE, vol. 7304, pp. 730416-730416-12.
105. Farley, V., Valliéres, A., Villemaire, A., Chamberland, M., Lagueux, P., and Giroux, J. (2007) Chemical agent detection and identification with a hyperspectral imaging infrared sensor. Proceedings of SPIE, vol. 6739, p. 673918.
106. Harig, R., Gerhard, J., Braun, R., Dyer, C., Truscott, B., and Mosley, R. (2006) Remote detection of gases and liquids by imaging Fourier transform spectrometry using a focal plane array detector: first results. Proceedings of SPIE, vol. 6378.
107. Richards, A. and Cromwell, B. (2004) Superframing: scene dynamic range extension of infrared cameras. Proceedings of SPIE vol. 5612, pp. 199-205.
108. Smith, M.I. and Heather, J.P. (2005) Review of image fusion technology in 2005. Thermosense XXVII, Proceedings of SPIE, vol. 5782.
109. www.flir.com. (2010).
110. Avdelidis, N.P., Almond, D.P., Ibarra-Castanedo, C., Bendada, A., Kenny, S., and Maldague, X. (2006) Structural integrity assessment of materials by thermography. Conference Damage in Composite Materials CDCM, Stuttgart, www.ndt.net. (2010).
111. Mat Desa, S. and Salih, Q.A. (2004) Image subtraction for real time moving object extraction. International Conference on Computer Graphics, Imaging and Extraction CGIV'04, pp. 41-45.
112. Jaehne, B. (2004) Practical Handbook on Image Processing for Scientific and technical Applications, CRC Press LLC.
113. Steger, C., Ullrich, M., and Wiedemann, C. (2008) Machine Vision Applications and Algorithms, Wiley-VCH Verlag GmbH.
114. Gonzalez, R.C. and Woods, R.E. (2008) Digital Image Processing, 3rd edn, Prentice Hall.
115. M̈ollmann, S. and G̈artner, R. (2009) New Trends in Process Visualization with fast line scanning and thermal imaging systems. Proceedings of the Conference Temperatur, PTB Berlin, ISBN 3-9810021-9-9.
116. Parker, J.R. (1997) Algorithms for Image Processing and Computer Vision, John Wiley & Sons, Inc.
117. Russ, J.C. (2007) The Image Processing Handbook, 5th edn, CRC Press Taylor and Francis Group, LLC.
118. Ballard, D.H. (1981) Generalizing the hough transform to detect arbitrary shapes. Pattern Recognit., 13 (2), 111-122.
119. Brunelli, R. (2009) Template Matching Techniques in Computer Vision: Theory and Practice, John Wiley & Sons, Inc.
120. Shepard, S.M. (2007) Thermography of composites. Mater. Eval., 65 (7), 690-696.
121. Milne, J.M. and Reynolds, W.N. (1985) The Non-destructive evaluation of composites and other materials by thermal pulse. Proceedings of SPIE, vol. 520, p. 119.
122. Kuo, P.K., Ahmed, T., Huijia, J., and Thomas, R.L. (1988) Phase - Locked image acquisition in thermography. Proceedings of SPIE, vol. 1004, pp. 41-45.
123. Moore, P.O. (ed.) (2001) Nondestructive Testing Handbook, 3rd edn, American Society for Nondestructive Testing, Columbus.
124. Breitenstein, O. and Langenkamp, M. (2003) Lock-in Thermography, Springer-Verlag, Berlin and Heidelberg.
125. Maldague, X.P.V. (2001) Theory and Practice of Infrared Technology for Nondestructive Testing, JohnWiley & Sons, Inc.
126. www.ndt.net. (2010).
127. Wu, D., Salerno, A., Scḧonbach, B., Hallin, H., and Busse, G. (1997) Phase sensitive modulation thermography and its application for NDE. Proceedings of SPIE, vol. 3056, pp. 176-183.
128. Sagakami, T. and Kubo, S. (2002) Application of pulse heating thermography and Lock-In thermography to quantitative non-destructive evaluations. Infrared Phys. Technol., 43, 211-218.
129. Grinzato, E., Bison, P.G., Marinetti, S., and Vavilov, V. (2007) Hidden corrosion detection in thick metallic components by transient IR thermography. Infrared Phys. Technol., 49, 234-238.
130. Maldague, X., Benitez, H.D., Ibarra Castenado, C., Benada, A., Laiza, H., and Caicedo, E. (2008) Definition of a new thermal contrast and pulse correction for defect quantification in pulsed thermography. Infrared Phys. Technol., 51, 160-167.
131. Genest, M. and Fahr, A. (2009) Pulsed thermography for nondestructive evaluation (NDE) of aerospace materials. Inframation 2009, Proceedings, vol. 10, pp. 59-65.
132. Tarin, M. (2009) Solar panel inspection using Lock-in-Thermography. Inframation 2009, Proceedings vol. 10, pp. 225-237.
133. Weiser, M., Arndt, R., R̈ollig, M., and Erdmann, B. (2008) Development and test of numerical model for pulse thermography in civil engineering. ZIB-Report 08-45, Konrad-Zuse Zentrum f̈ur Informationstechnik, Berlin, December 2008.
134. Tarin, M. and Kasper, A. (2008) Fuselage inspection of boeing-737 using lock-in thermography. Proceedings of SPIE, vol. 6939, pp. 1-10.
135. Incropera, F.P. and DeWitt, D.P. (1996) Fundamentals of Heat and Mass Transfer, 4th edn, John Wiley & Sons, Inc., New York.
136. Baehr, H.D. and Karl, S. (2006) Heat and Mass Transfer, 2nd revised edn, Springer, Berlin and New York.
137. M̈ollmann, K.-P., Pinno, F., and Vollmer, M. (2007) Influence of wind effects on thermal imaging - is the wind chill effect relevant? Inframation 2007, Proceedings, ITC 121 A May 24, 2007.
138. Madding, R. (2008) Finding R-values of stud frame constructed houses with IR thermography. Inframation 2008, Proceedings vol. 9, pp. 261-277.
139. Sazhin, S.S. (2006) Advanced models of fuel droplet heating and evaporation. Prog. Energy Combust. Sci., 32, 162-214.
140. Sazhin, S.S., Krutitskii, P.A., Martynov, S.B., Mason, D., Heikal, M.R., and Sazhina, E.M. (2007) Transient heating of a semitransparent spherical body. Int. J. Therm. Sci., 46, 444-457.
141. VDI Ẅarmeatlas (in German) (2006) Verein Deutscher Ingenieure, VDI-Gesellschaft Verfahrenstechnik und Chemieingenieurwesen (GVC), 10th edn, Springer, Berlin.
142. Vollmer, M. (2009) Newton's law of cooling revisited. Eur. J. Phys., 30, 1063-1084.
143. Karsẗadt, D., Pinno, F., M̈ollmann, K.P., and Vollmer, M. (1999) Anschauliche Ẅarmelehre im Unterricht: ein Beitrag zur Visualisierung thermischer Vorg̈ange. Prax. Naturwiss. Phys., 48 (5), 24-31.
144. Karsẗadt, D., M̈ollmann, K.P., Pinno, F., and Vollmer, M. (2001) There is more to see than eyes can detect: visualization of energy transfer processes and the laws of radiation for physics education. Phys. Teach., 39, 371-376.
145. M̈ollmann, K.-P. and Vollmer, M. (2000) Eine etwas andere, physikalische Sehweise - Visualisierung von Energieumwandlungen und Strahlungsphysik f̈ur die. Phys. Bl., 56, 65-69.
146. M̈ollmann, K.-P. and Vollmer, M. (2007) Infrared thermal imaging as a tool in university physics education. Eur. J. Phys., 28, S37-S50.
147. Halliday, D., Resnick, R., and Walker, J. (2001) Fundamentals of Physics, Extended, 6th edn, John & Wiley Sons, Inc.
148. Tipler, P.A. and Mosca, G. (2003) Physics for Scientists and Engineers, 5th edn, Freeman.
149. Bloomfield, L. (2007) How Everything Works, John Wiley & Sons, Inc.
150. Bellemans, A. (1981) Power demand in walking and pace optimization. Am. J. Phys., 49, 25-27.
151. Keller, J.B. (1973) A theory of competitive running. Phys. Today, 26, 42-47.
152. Alexandrov, I. and Lucht, P. (1981) Physics of sprinting. Am. J. Phys., 49, 254-257.
153. Maroto, J.A., Ṕerez-Mũnuzuri, V., and Romero-Cano, M.S. (2007) Introductory analysis of the Bénard Marangoni convection. Eur. J. Phys., 28, 311-320.
154. Consumer Energy Center of the California Energy Commission http://www.consumerenergycenter.org/home/heating_cooling/evaporative.html. (2010).
155. Planinsic, G. and Vollmer, M. (2008) The surface-to-volume-ratio in thermal physics: from cheese cubes to animal metabolism. Eur. J. Phys., 29, 369-384 and 661.
156. Vollmer, M. (2004) Physics of the microwave oven. Phys. Educ., 39, 74-81.
157. Baylie, M., Ford, P.J., Mathlin, G.P., and Palmer, C. (2009) The jumping ring experiment. Phys. Educ., 44 (1), 27-32.
158. Bostock-Smith, J.M. (2008) The jumping ring and Lenz's law - an analysis. Phys. Educ., 43 (3), 265-269.
159. Michalski, L., Eckersdorf, K., Kucharski, J., and McGhee, J. (2001) Temperature Measurement, 2nd edn, John Wiley & Sons, Ltd, Chichester.
160. Thuery, J. (1992) Microwaves, Industrial, Scientific and Medical Applications, Artech House, Boston.
161. Smith, B.L. and Carpentier, M.-H. (1993) The Microwave Engineering Handbook, vols. 1-3, Chapman & Hall, London.
162. Parker, K. and Vollmer, M. (2004) Bad food and good physics: the development of domestic microwave cookery. Phys. Educ., 39, 82-90.
163. Vollmer, M., M̈ollmann, K.-P., and Karsẗadt, D. (2004) More experiments with microwave ovens. Phys. Educ., 39, 346-351.
164. Vollmer, M., M̈ollmann, K.-P., and Karsẗadt, D. (2004) Microwave oven experiments with metals and light sources. Phys. Educ., 39, 500-508.
165. Vollmer, M., M̈ollmann, K.-P., and Pinno, F. (2007) Looking through matter: quantitative IR imaging when observing through IR windows. Inframation 2007, Proceedings vol. 8, pp. 109-127.
166. Henke, S., Karsẗadt, D., M̈ollmann, K.P., Pinno, F., and Vollmer, M. (2004) in Inframation Proceedings, vol. 5 (eds R. Madding and G. Orlove), ITC, North Billerica, pp. 287-298.
167. Wolfe, W.L. and Zissis, G.J. (eds) (1993) The Infrared Handbook, revised edition, 4th printing, The Infrared Information Analysis Center, Environmental Research Institute of Michigan, Michigan.
168. Vollmer, M., Karsẗadt, D., M̈ollmann, K.-P., and Pinno, F. (2006) Influence of gaseous species on thermal infrared imaging. Inframation 2006, Proceedings vol. 7, pp. 65-78.
169. Holst, G.C. (2000) Common Sense Approach to Thermal Imaging, SPIE Optical Engineering Press, Washington, DC.
170. Kaplan, H. (1999) Practical applications of infrared thermal sensing and imaging equipment, Tutorial Texts in Optical Engineering, 2nd edn, vol. TT34, SPIE Press, Bellingham.
171. Feist, W. and Schnieders, J. (2009) Energy efficiency - a key to sustainable housing. Eur. Phys: J. Special Top., 176, 141-153.
172. Fronapfel, E. and Kleinfeld, J. (2005) Analysis of HVAC system and building performance utilizing IR, physical measurements and CFD modeling. Inframation 2005, Proceedings Vol. 6, pp. 219-229.
173. Amhaus, E.G. (2004) Infrared applications for post construction radiant heating systems. Inframation 2004, Proceedings Vol. 5, pp. 1-8.
174. Karsẗadt, D., M̈ollmann, K.P., Pinno, F., and Vollmer, M. (2005) Using infrared thermography for optimization, quality control and minimization of damages of floor heating systems. Inframation 2005, Proceedings Vol. 6, pp. 313-321.
175. Consumer information of the US Department of Energy http://www.eere.energy.gov/consumerinfo/factsheets/bc2.html (2010).
176. Tanner, Ch. (2000) Die Geb̈audeḧulle - Konstruktive, Bauphysikalische und Umweltrelevante Aspekte, EMPA Akademie, Fraunhofer IRB Verlag, Stuttgart, p. 2437.
177. Madding, R.P. and Lyon, B.R. (2000) Wind effects on electrical hot spots - some experimental data. Thermosense XXII, Proceedings of SPIE, Vol. 4020, pp. 80-84.
178. Madding, R.P., Leonard, K., and Orlove, G. (2002) Important measurements that support IR surveys in substations. Inframation 2002, Proceedings Vol. 3, pp. 19-25.
179. M̈ollmann, K.-P., Pinno, F., and Vollmer, M. (2007) Influence of wind effects on thermal imaging results - Is the wind chill effect relevant? Inframation 2007, Proceedings Vol. 8, pp. 21-31.
180. Oscevski, R. and Bluestein, M. (2005) The new wind chill equivalent temperature. Bull. Am. Meteorol. Soc., 86 (10) 1453-1458.
181. Incropera, F.P. and DeWitt, D.P. (1996) Fundamentals of Heat and Mass Transfer, 4th edn, John Wiley & Sons, Inc., New York.
182. http://www.consumerenergycenter.org/home/heating-cooling/evaporative.html (2010).
183. Grinzato, E. and Rosina, E. (2001) Infrared and thermal testing for conservation of historic buildings, in Nondestructive Testing Handbook, Infrared and Thermal Testing, Vol. 3, Chapter 18.5 (ed. P.O. Moore), 3rd edn, American Society for Nondestructive Testing, Inc., Columbus.
184. Wood, S. (2004) Non-invasive roof leak detection using infrared thermography. Inframation 2004, Proceedings Vol. 5, pp. 73-82.
185. Colantonio, A. and Wood, S. (2008) Detection of moisture within building enclosures by interior and exterior thermographic inspections. Inframation 2008, Proceedings Vol. 9, pp. 69-86.
186. Kleinfeld, J.M. (2004) IR for detection of exterior wall moisture and delamination: a case study and comparison to FEA predictions. Inframation 2004, Proceedings, Vol. 5, pp. 45-57.
187. Royo, R. (2007) Looking for moisture: inspection of a tourist village at the south of Spain. Inframation 2007, Proceedings Vol. 8, pp. 39-49.
188. Internet source for download: http://www.holznagels.de/DYNATHERM/ download/index.html DynaTherm2000.zip (2009).
189. Vollmer, M. (2009) Newton's law of cooling revisited. Eur. J. Phys., 30, 1063-1084.
190. Pinno, F., M̈ollmann, K.-P., and Vollmer, M. (2009) Solar load and reflection effects and respective time constants in outdoor building inspections. Inframation 2009, Proceedings Vol. 10, pp. 319-330.
191. Henke, S., Karsẗadt, D., M̈ollmann, K.P., Pinno, F., and Vollmer, M. (2004) Identification and suppression of thermal reflections in infrared thermal imaging. Inframation Proceedings Vol. 5, pp. 287-298.
192. M̈ollmann, K.-P., Pinno, F., and Vollmer, M. (2008) Night sky radiant cooling - influence on outdoor thermal imaging analysis. Inframation 2008, Proceedings Vol. 9, pp. 279-295.
193. Martin, M. and Berdahl, P. (1984) Characteristics of infrared sky radiation in the United States. Solar Energy, 33, 321-336.
194. Moyer, N. (2008) Using thermography in the evaluation of the NightCool nocturnal radiation cooling concept. Inframation 2008, Proceedings Vol. 9, pp. 309-319.
195. Vollmer, M., M̈ollmann, K.-P., and Pinno, F. (2008) Cheese cubes, light bulbs, soft drinks: An unusual approach to study convection, radiation and size dependent heating and cooling. Inframation 2008, Proceedings Vol. 9, pp. 477-492.
196. Pinno, F., M̈ollmann, K.-P., and Vollmer, M. (2008) Thermography of window panes - problems, possibilities and troubleshooting. Inframation 2008, Proceedings Vol. 9, pp. 355-362.
197. http://www.energyconservatory.com/ (2010).
198. Streinbronn, L. (2006) Building air barrier testing and verification using infrared thermography and blower doors as part of the building commissioning process. Inframation 2006, Proceedings Vol. 7, pp. 129-144.
199. Amhaus, E.G. and Fronapfel, E.L. (2005) Infrared imaging and log construction thermal performance. Inframation 2005, Proceedings Vol. 6, pp. 285-292.
200. Coloantonio, A. and Desroches, G. (2005) Thermal patterns due to moisture accumulation within exterior walls. Inframation 2005, Proceedings Vol. 6, pp. 249-260.
201. Madding, R. (2008) Finding R-values of stud frame constructed houses with IR thermography. Inframation 2008, Proceedings vol. 9, pp. 261-277.
202. Madding, R. (2009) Finding R-values of SIP and ICF wall construction with IR thermography. Inframation 2009, Proceedings Vol. 10, pp. 37-47.
203. G̈unzler, H. and Gremlich, H.-U. (2002) IR Spectroscopy - An Introduction, Wiley-VCH Verlag GmbH.
204. Database of IR Spectra and Properties of Chemical Compounds. http://webbook.nist.gov/chemistry/formser. html. (2010).
205. Socrates, G. (2001) Infrared and Raman Characteristic Group Frequencies, Tables and Charts, 3rd edn, John Wiley & Sons, Inc.
206. Bell, R.J. (1972) Introductory Fourier Transform Spectroscopy, Academic Press, New York.
207. Kauppinen, J. and Partanen, J. (2001) Fourier Transform in Spectroscopy, Wiley-VCH Verlag GmbH, Berlin.
208. Richards, A. and Johnson, G. (2005) Radiometric calibration of infrared cameras accounting for atmospheric path effects. Thermosense XXVII, Proceedings of SPIE vol. 5782, pp. 19-28.
209. Strachan, D.C. et al. (1985) Imaging of hydrocarbon vapours and gases by infrared thermography. J. Phys. E: Sci. Instrum., 18, 492-498.
210. Karsẗadt, D., M̈ollmann, K.P., Pinno, F., and Vollmer, M. (2006) Influence of gaseous species on thermal infrared imaging. Inframation 2006, Proceedings vol. 7, pp. 65-78.
211. http://www.flir.com/. (2010).
212. Furry, D., Richards, A., Lucier, R., and Madding, R.P. (2005) Detection of Volatile Organic Compounds (VOC's) with a spectrally filtered cooled mid-wave infrared camera. Inframation 2005, Proceedings, vol. 6, pp. 213-218.
213. Madding, R. and Benson, R. (2007) Sulphur Hexafluoride (SF6) insulating gas leak detection with an IR imaging camera. Inframation 2007, Proceedings vol. 8, pp. 89-94.
214. Vollmer, M. and M̈ollmann, K.-P. (2009) Perspectives of IR imaging for industrial detection and monitoring of CO2. Proceedings of the Conference Temperature PTB, Berlin. ISBN: 3-9810021-9-9.
215. Vollmer, M. and M̈ollmann, K.-P. (2009) IR imaging of gases: potential applications for CO2 cameras. Inframation 2009, Proceedings vol. 10, pp. 99-112.
216. www.spectrogon.com. (2010).
217. Vollmer, M. and M̈ollmann, K.-P. (2009) IR imaging of gases: quantitative analysis. Inframation 2009, Proceedings vol. 10, pp. 113-123.
218. Benson, R.G., Panek, J.A., and Drayton, P. (2008) Direct measurements of minimum detectable vapor concentration using passive infrared optical imaging systems. Paper 1025 of Proceedings 101st ACE meeting (held June 2008 in Portland/Oregon) of the Air & Waste and Management Association.
219. Edwards, D.K. (1960) Absorption by infrared bands of carbon dioxide gas at elevated pressures and temperatures. J. Opt. Soc. Am., 50, 617-626.
220. Burch, D.E. et al. (1962) Total absorptance of CO2 in the infrared. Appl. Opt., 1, 759-765.
221. Lapp, M. (1960) Emissivity calculations for CO2. part 1 of PhD thesis, Cal Technology.
222. Incropera, F.O. and DeWitt, D.P. (1996) Fundamentals of Heat and Mass Transfer, 4th edn, John Wiley & Sons, Inc.
223. Schack, K. (1970) Berechnung der Strahlung von Wasserdampf und Kohlendioxid. Chem.-Ing.-Tech., 42 (2), 53-58.
224. DeWitt, D.P. and Nutter, G.D. (1988) Theory and Practice of Radiation Thermometry, John Wiley & Sons, Inc., New York.
225. Baehr, H.D. and Stephan, K. (2006) Ẅarme - und Stoff̈ubertragung, 5th German edn, Springer-Verlag.
226. Baehr, H.D. and Stephan, K. (2006) Heat and Mass Transfer, 2nd English edn, Springer, Berlin.
227. Vollmer, M. (2005) Hot gases: transition from line spectra to thermal radiation. Am. J. Phys., 73, 215-223.
228. Nauenberg, M. (2007) Am. J. Phys., 75, 947.
229. (2007) Am. J. Phys., 75, 949.
230. Houghton, J.T. et al. (eds) (2001) Climate Change 2001, The Scientific Basis, Contribution of Working Group I to 3rd Assessment Report of the Intergovernmental Panel on Climate Change, IPCC.
231. Solomon, S. et al. (eds) (2007) Climate Change 2007, The Physical Science Basis, Contribution of Working Group I to 4th Assessment Report of the Intergovernmental Panel on Climate Change, IPCC.
232. Metz, B. et al. (eds) (2007) Climate Change 2007, Mitigation of Climate Change, Contribution of Working Group III to 4th Assessment Report of the Intergovernmental Panel on Climate Change, IPCC.
233. Yoon, H.W. et al. (2006) Flow visualization of heated CO2 gas using thermal imaging. Thermosense XXVIII, Proceedings of SPIE vol 6205, p. 62050U-1.
234. Tank, V., Pfanz, H., and Kick, H. (2008) New remote sensing techniques for the detection and quantification of earth surface CO2 degassing. J. Volcanol. Geotherm. Res., 177, 515-524.
235. M̈ollmann, K.-P., Lutz, N., Vollmer, M., and Wille, Ch. (2004) Thermography of microsystems. Inframation 2004, Proceedings, Las Vegas, Vol. 5, pp. 183-195.
236. M̈ollmann, K.-P., Pinno, F., and Vollmer, M. (2009) Microscopic and high-speed thermal imaging: a powerful tool in physics R&D. Inframation 2009, Proceedings, Las Vegas, Vol. 10, pp. 303-318.
237. Holst, G.C. (2000) Common Sense Approach to Thermal Imaging, SPIE Press, Bellingham.
238. Roberge, D.M., Ducry, L., Bieler, N., Cretton, P., and Zimmermann, B. (2005) Microreactor Technology: A Revolution for the Fine Chemical and Pharmaceutical Industries? Chemical Engineering and Technology, Vol. 28, No. 3, Wiley-VCH Verlag GmbH & Co. KgaA, Weinheim.
239. Hessel, V., Ehrfeld, W., Golbig, K., Haverkamp, V., L̈owe, H., Storz, M., Wille, Ch., Guber, A., J̈ahnisch, K., and Baerns, M. (2000) Conference Proceedings of the 3rd International Conference on Micro-reaction Technology, Springer-Verlag, Frankfurt a.M., April 18th-21st 1999, pp. 526-540.
240. www.imm-mainz.de. (2010).
241. Hessel, V., Ehrfeld, W., Herweck, Th., Haverkamp, V., L̈owe, H., Schiewe, J., Willle, Ch., Kern, Th., and Lutz, N. (2000) Conference Proceedings of the 4th International Conference on Micro-reaction Technology, AIChE, Atlanta, March 5th-9th 2000.
242. Wille, Ch., Ehrfeld, W., Haverkamp, V., Herweck, T., Hessel, V., L̈owe, H., Lutz, N., M̈ollmann, K.-P., and Pinno, F. (2000) Dynamic monitoring of fluid equipartion and heat release in a falling film microreactor using real-time thermography. Proceedings of the MICRO.tec 2000 VDE World Microtechnologies Congress, September 25th-27th 2000, Expo 2000, Hannover, Germany, VDE Verlag, Berlin und Offenbach, pp. 349-354.
243. Danckwerts, P.V. (1970) Gas/Liquid Reactions, McGraw-Hill Book Company, New York, pp. 35, 37, 45, 47, 55.
244. Marioth, E., Loebbecke, S., Scholz, M., Schn̈urer, F., T̈urke, T., Antes, J., Krause, H.H., Lutz, N., M̈ollmann, K.-P., and Pinno, F. (2001) Investigation of microfluidics and heat transferability inside a microreactor array made of glas. Proceedings of the 5th International Conference on Microreaction Technology, 27th-30th May 2001, Strasbourg.
245. www.ict.fhg.de. (2010).
246. Incropera, F.P. and DeWitt, D.P. (1996) Fundamentals of Heat and Mass Transfer, 4th edn, John Wiley & Sons, Inc., ISBN: 0-471-30460-3.
247. Brandner, J.J., Benzinger, W., Schygulla, U., Zimmermann, S., and Schubert, K. (2007) Metallic micro heat exchangers: properties, applications and long term stability. ECI Symposium Series, Vol. RP5: Proceedings of 7th International Conference On Heat Exchanger Fouling and Cleaning - Challenges and Opportunities, Engineering Conferences International, Tomar, Portugal, July 1-6, 2007. (eds H. M̈uller-Steinhagen, M.R. Malayeri, and A.P. Watkinson).
248. www.mikroglas.de. (2010).
249. Seeger, K. (1991) Semiconductor Physics, Springer Series in Solid State Science, 5th edn, Springer-Verlag, New York, Berlin and Heidelberg.
250. www.ipht-jena.de/en/. (2010).
251. Madou, M. (1997) Fundamentals of Microfabrication, CRC Press, Boca Raton, London, New York, and Washington, DC.
252. Rowe, D.M. (ed.) (2005) Thermoelectrics Handbook: Macro to Nano, CRC Press, Boca Raton, London, New York and Washington, DC.
253. M̈ollmann, K.-P., Trull, T., and Mientus, R. (2009) Single Microbolometer as IR Radiation Sensors Results of a Technology Development Project, Proceedings of the Conference Temperature, PTB, Berlin, ISBN: 3-9810021-9-9.
254. Gerlach, G. and Doetzel, W. (2008) Introduction to Microsystem Technology, Wiley-VCH Verlag GmbH.
255. Hudson, R.D. and Hudson, J.W. (eds) (1975) Infrared Detectors, John Wiley & Sons, Inc., Dowden, Hutchinson and Ross.
256. www.ipm.fhg.de. (2010).
257. www.leister.com/axetris/. (2010).
258. www.micropelt.com. (2010).
259. B̈ottner, H. (2002) Thermoelectric micro devices: current state, recent developments and future aspects for technological progress and applications. Proceedings of the 21st International Conference on Thermoelectrics, August 25th-29th, 2002, Long Beach, pp. 511-518.
260. B̈ottner, H., Nurnus, J., Gavrikov, A., Kuhner, G., Jagle, M., Kunzel, C., Eberhard, D., Plescher, G., Schubert, A., and Schlereth, K.-H. (2004) New thermoelectric components using microsystem technologies. J. Microelectromech. Syst., pp. 414-420.
261. www.naiss.de. (2010).
262. Hecht, E. (1998) Optics, 3rd edn, Addison-Wesley.
263. Vollmer, M., Henke, S., Karstadt, D., Mollmann, K.P., and Pinno, F. (2004) Identification and suppression of thermal reflections in infrared thermal imaging. Inframation 2004, Proceedings vol. 5, pp. 287-298.
264. Bell, R.J. (1972) Introductory Fourier Transform Spectroscopy, Academic Press, New York.
265. Kauppinen, J. and Partanen, J. (2001) Fourier Transform in Spectroscopy, Wiley-VCH Verlag GmbH, Berlin.
266. Palik, E.P. (ed.) (1985) Handbook of Optical Constants of Solids, vol. 1, Academic Press; vol. 2, (1991).
267. Mollmann, K.P., Karstadt, D., Pinno, F., and Vollmer, M. (2005) Selected critical applications of thermography: convections in fluids, selective emitters and highly reflecting materials. Inframation 2005, Proceedings vol. 6, pp. 161-173.
268. http://www.thermografie-schweiger.de. (2010).
269. De Witt, D.P. and Nutter, G.D. (1988) Theory and Practice of Radiation Thermometry, Jhon Wiley & Sons, Inc., New York.
270. Holst, G.C. (2000) Common Sense Approach to Thermal Imaging, SPIE Optical Engineering Press, Washington, DC.
271. Vollmer, M., Henke, S., Karstadt, D., Mollmann, K.P., and Pinno, F. (2004) Challenges in infrared imaging: low emissivities of hot gases, metals, and metallic cavities. Inframation 2004, Proceedings vol. 5, pp. 355-363.
272. Schmidt, V., Mollmann, K.-P., Muilwijk, F., Kalz, S., and Stoppiglia, H. (2002) Radiation thermometry on aluminium. VIR * -Conference 2002, Ijmuiden, vol. 78, October 2002, pp. 897-901.
273. Gartner, R., Klatt, P., Loose, H., Lutz, N., Mollmann, K.-P., Pinno, F., Muilwijk, F., Kalz, S., and Stoppiglia, H. (2004) New aluminium radiation thermometry. VIR * -Conference 2004, Brussels, vol. 80, June 2004, pp. 642-647.
274. Papp, L. (2004) Using IR surveys in DUNAFERR steelworks complex diagnostic systems. Inframation 2004, Proceedings vol. 5, pp. 371-386.
275. Nolan, D., Zhao, Q., Abdelrahman, M., Vondra, F., and Dinwiddie, R.B. (2006) The effect of process characteristics on metal fill and defect formation in aluminum lost foam casting. Inframation 2006, Proceedings vol. 7, pp. 51-64.
276. Calmes, F. (2000) Infrared inspections of robotic welders in automotive assembly. Inframation 2000, Proceedings vol. 1, pp. 25-23.
277. Sinclair, D. (2004) Infrared cameras enhance productivity and safety at GM. Inframation 2004, Proceedings vol. 5, pp. 281-286.
278. Predmesky, R. and Ruane, T. (2004) Using infrared cameras for process control. Inframation 2004, Proceedings vol. 2, pp. 27-29.
279. Royo, R. (2004) Characterization of automation brake thermal conditions by the use of infrared thermography. Inframation 2004, Proceedings vol. 5, pp. 259-266.
280. Infrared detection of standing waves. European patent application 1255102, see http://www.freepatentsonline.com/EP1255102.pdf. (2010).
281. Tire wear forecasting method and apparatus. US patent 6883962. (2005).
282. Putman, B.J. and Amirkhanian, S.N. (2006) Thermal segregation in asphalt pavements. Inframation 2006, Proceedings vol. 7, pp. 233-244.
283. Steyn, W.Jvd.M. (2005) Applications of thermography in pavement engineering. Inframation 2005, Proceedings vol. 6, pp. 81-89.
284. Monem, T.A., Olaufa, A.A., and Mahgoub, H. (2005) Asphalt crack detection using thermography. Inframation 2005, Proceedings vol. 6, pp. 139-150.
285. Amirkhanian, S.N. and Hartman, E. (2004) Applications of infrared cameras in the paving industry, Inframation 2004, Proceedings vol. 5, pp. 91-99.
286. Philipps, L., Willoughby, K., and Mahoney, J. (2003) Infrared thermography revolutionizes hot-mix asphalt paving. Inframation 2003, Proceedings vol. 4, pp. 213-221.
287. Crane, R.L., Astarita, T., Berger, H., Cardone, G., Carlomagno, G.M., Jones, T.S., Lansing, M.D., Russell, S.S., Walker, J.L., and Workman, G.L. (2001) Aerospace applications of infrared and thermal testing, in Nondestructive Testing Handbook, Infrared and Thermal Testing, vol. 3, 3rd edn, Chapter 15 (ed. P.O. Moore), American Society for Nondestructive Testing, Inc., Columbus. pp. 489-526.
288. Spring, R.W. (2001) An overview of infrared thermography applications for nondestructive testing in the aerospace industry. Inframation 2001, Proceedings vol. 2, pp. 191-196.
289. Genest, M. and Fahr, A. (2009) Pulsed thermography for nondestructive evaluation (NDE) of aerospace materials. Inframation 2009, Proceedings vol. 10, pp. 59-65.
290. Figg, J. and Daquila, T. (2001) Applying the benefits of infrared thermography in naval aviation. Inframation 2001, Proceedings vol. 2, pp. 207-214.
291. Tarin, M. and Kasper, A. (2008) Fuselage inspection of Boeing-737 using lock-in thermography. Proceedings of the Thermosense XXX, Proceedings of SPIE vol. 6939, SPIE Press, Bellingham, electronic file: 693919-1 to 693919-10.
292. Holleman, E., Sharp, D., Sheller, R., and Styron, J. (2007) IR characterization of Bi-propellant reaction control engines during auxiliary propulsion systems tests at NASA's White Sands test facility in Las Cruces, New Mexico. Inframation 2007, Proceedings vol. 8, pp. 95-107.
293. Gazarek, M., Johnson, D., Kist, E., Novak, F., Antill, Ch., Haakenson, D., Howell, P., Jenkins, R., Yates, R., Stephan, R., Hawk, D., and Amoroso, M. (2005) Infrared on-orbit RCC inspection with the EVA IR camera: development of flight hardware from a COTS system. Inframation 2005, Proceedings vol. 6, pp. 273-284.
294. Gazarik, M., Johnson, D., Kist, E., Novak, F., Antill, C., Haakenson, D., Howell, P., Pandolf, J., Jenkins, R., Yates, R., Stephan, R., Hawk, D., and Amoroso, M. (2006) Development of an extra-vehicular (EVA) infrared (IR) camera inspection system. Proceedings of the Thermosense XXVIII, Proceedings of SPIE vol. 6205, p. 62051C.
295. Elliott Cramera, K., Winfreea, W.P., Hodgesb, K., Koshtib, A., Ryanc, D., and Reinhardt, W.W. (2006) Status of thermal NDT of space shuttle materials at NASA. Proceedings of the Thermosense XXVIII, Proceedings of SPIE vol. 6205, p. 62051B.
296. ITC Newsletter, vol. 7, issue 9, p. 2, see http://itcnewsletter.com (September 2006).
297. Sauser, B. http://www.technologyreview. com/computing/23533/, published by MIT, Monday, Image Credit: NASA/HYTHIRM team (28 September 2009).
298. Schultz, C. (2004) Developing and implementing an infrared predictive maintenance program. Maintenance Technology, May 2004, pp. 28-32.
299. May, K.B. (2003) Predictive maintenance inspections - boilers in fossil power plants. Inframation 2003, Proceedings vol. 4, pp. 161-166.
300. Updegraff, G. (2005) Infrared thermography program at a gas-fired turbine generation plant. Inframation 2005, Proceedings vol. 6, pp. 293-300.
301. Ralph, M.J. (2004) Power Plant Thermography-wide Range of Applications. Inframation 2004, Proceedings vol. 5, pp. 241-248.
302. Ralph, M.J. (2009) The continuing story of power plant thermography. Inframation 2009, Proceedings vol. 10, pp. 253-258.
303. Didychuk, E. (2006) Predictive maintenance of HVDC converter stations within Manitoba Hydro. Inframation 2006, Proceedings vol. 7, pp. 409-422.
304. Bales, M.J., Berardi, P.G., Bishop, C.C., Cuccurullo, G., Grover, P.E., Mack, R.T., McRae, T.G., Pelton, M.W., Seffrin, R.J., and Weil, G.J. (2001) Chemical and petroleum applications of infrared and thermal testing, in Nondestructive Testing Handbook, Infrared and Thermal Testing, vol. 3, 3rd edn, Chapter 17 (ed. P.O. Moore), American Society for Nondestructive Testing, Inc., Columbus. pp. 571-600.
305. Massey, L.G. (2007) IR keeps West Virginia coal miners safe. Inframation 2007, Proceedings vol. 8, pp. 327-334.
306. Blanch, M. (2008) Thermal imaging extracting faults in the sand mining industry. Inframation 2008, Proceedings vol. 9, pp. 45-48.
307. Blanch, M. (2008) How sweet it is using infrared thermography. Inframation 2008, Proceedings vol. 9, pp. 49-51.
308. Thon, R.J. (2002) Troubleshooting paper machine problems through thermal imaging. Inframation 2002, Proceedings vol. 3, pp. 191-194.
309. Baird, L.W. and Bushee, R.L. (2003) Paper mill predictive maintenance utilizing infrared. Inframation 2003, Proceedings vol. 4, pp. 17-24.
310. Thon, R.J. (2007) Using thermography to reduce energy costs in paper mills. Inframation 2007, Proceedings vol. 7, pp. 553-555.
311. Bremond, P. (2004) IR Imaging Assesses Damage in Mechanical Parts. Photonics Spectra (February 2004), pp. 62-64.
312. Allison, J.N. (2005) Applying infrared imaging techniques to marine surveying . . . identifying moisture intrusion in a wood cored FRP yacht. Inframation 2005, Proceedings vol. 6, pp. 1-13.
313. Allison, J.N. (2008) Infrared thermography as part of quality control in vessel construction. Inframation 2008, Proceedings vol. 9, pp. 11-16.
314. Ershov, O.V., Klimova, A.G., and Vavilov, V.P. (2006) Airborne detection of natural gas leaks from transmission pipelines by using a laser system operating in visual, near-IR and mid-IR wavelength bands. Thermosense XXVIII, Proceedings of SPIE vol. 6205, p. 62051G.
315. Miles, J.J., Dahlquist, A.L., and Dash, L.C. (2006) Thermographic identification of wetted insulation on pipelines in the arctic oilfields. Thermosense XXVIII, Proceedings of SPIE vol. 6205, p. 62051H.
316. Bonin, R.G. (2002) Infrared applications in the petrochemical refinery. Inframation 2002, Proceedings vol. 3, pp. 13-17.
317. Whitcher, A. (2004) Thermographic monitoring of refractory lined petroleum refinery equipment. Inframation 2004, Proceedings vol. 5, pp. 299-308.
318. Susralski, B.D. and Griswold, Th. (2000) Predicting mechanical systems failures using IR thermography. Inframation 2000, Proceedings vol. 1, pp. 81-87.
319. Pearson, J. and Pandya, D.A. (2006) IR thermography assessment enhanced compressed air system operations & indirectly slashed $26 K utility bills at New Jersey international and bulk mail center. Inframation 2006, Proceedings vol. 7, pp. 117-121.
320. Tarin, M. (2009) Solar panel inspection using lock-in thermography. Inframation 2009, Proceedings vol. 10, pp. 225-237.
321. Aderhold, J., Meinlschmidt, P., Brocke, H., and Jungert, A. (2008) Rotor blade defect detection using thermal and ultrasonic waves. Proceedings of the 9th International German Wind Energy Conference DEWEK, held 26th - 27th November 2008, in Bremen, http://08.dewek.de/; see also Fraunhofer Gesellschaft/Germany: http://www.vision.fraunhofer.de/en/20/projekte/459.html.
322. Moore, S. (2007) Thermography improves operations at grocery stores. Inframation 2007, Proceedings vol. 8, pp. 181-186.
323. Sims, D. (2001) Using infrared imaging on production tanks and vessels. Inframation 2001, Proceedings vol. 2, pp. 119-125.
324. Sims, D. (2004) Monitoring the process conditions in oil field production vessels with infrared technology. Inframation 2004, Proceedings vol. 5, pp. 273-280.
325. Snell, J. and Schwoegler, M. (2004) Locating levels in tanks and silos using infrared thermography. Proceedings of the Thermosense XXVI, Proceedings of SPIE vol. 5405, pp. 245-248.
326. Walford, G.V. (2008) Use of infrared imaging techniques to understand and quantify expanded polymer molding operations and part quality. Inframation 2008, Proceedings vol. 9, pp. 493-503.
327. Madding, R.P. (2004) IR window transmittance temperature dependence. Inframation 2004, Proceedings vol. 5, pp. 161-169.
328. Bosworth, B.R., Eto, M., Ishii, T., Mader, D.L., Okamoto, Y., Persson, L., Rayl, R.R., Seffrin, R.J., Shepard, S.M., Snell, J.R., Teich, A.C., Westberg, S.-B., and Zayicek, P.A. (2001) Electric power applications of infrared and thermal testing, in Nondestructive Testing Handbook, Infrared and Thermal Testing, vol. 3, 3rd edn, Chapter 16 (ed. P.O. Moore), American Society for Nondestructive Testing, Inc., Columbus. pp. 527-570.
329. Bennett, R. (2009) Normalizing the E-values of components on a printed circuit board. Inframation 2009, Proceedings vol. 10, pp. 157-162.
330. Fergueson, D.E. (2006) Applications of thermography in product safety. Inframation 2006, Proceedings vol. 7, pp. 203-206.
331. Fishbune, R.J. (2000) IR thermography for electronic assembly design verification. Inframation 2000, Proceedings vol. 1, pp. 211-217.
332. Wallin, B. and Wiecek, B. (2001) Infrared Thermography of electronic components, in Nondestructive Testing Handbook, Infrared and Thermal Testing, vol. 3, 3rd edn, Chapter 19 (ed. P.O. Moore), American Society for Nondestructive Testing, Inc., Columbus. pp. 659-678.
333. Radford, P. (2008) Ship's stearing gear motor problem diagnosed using IR technology. Inframation 2008, Proceedings vol. 9, pp. 373-376.
334. Madding, R.P. (2001) Finding internal electrical resistance from external IR thermography measurements on oil-filled circuit breakers during operation. Inframation 2001, Proceedings vol. 2, pp. 37-44.
335. Leonard, K. (2006) What if ? Inframation 2006, Proceedings vol. 7, pp. 123-127.
336. Maple, C. (2003) Secure Plant infrastructure through remote substation monitoring. Inframation 2003, Proceedings vol. 4, pp. 151-159.
337. Brydges, D. (2005) Aerial thermography surveys find insulator and other problems. Inframation 2005, Proceedings vol. 6, pp. 193-202.
338. Madding, R.P. (2002) Important measurements that support IR surveys in substations. Inframation 2002, Proceedings vol. 3, pp. 19-25.
339. Gierlach, J. and DeMonte, J. (2005) Infrared inspections on electric panels without removing covers: can the inspection be completed correctly? Inframation 2005, Proceedings vol. 6, pp. 203-212.
340. www.iriss.com, free download of The Ten Things You Need To Know About Infrared Windows. (2010).
341. Robinson, M. (2007) Infrared Windows: Where do I start? Inframation 2007, Proceedings vol. 8, pp. 291-307.
342. Newton, V. (2008) Arc flash and electrical safety for thermographers. Inframation 2008, Proceedings vol. 9, pp. 321-332.
343. Theyerl, M.N. (2008) Arc Flash concerns & detecting early signs. Inframation 2008, Proceedings vol. 9, pp. 447-457.
344. Androli, D. (2006) A thermographers common sense approach to arc flash safety. Inframation 2006, Proceedings vol. 7, pp. 207-214.
345. Woods, B. (2005) Reducing arc flash hazards through electrical system modifications. Inframation 2005, Proceedings vol. 6, pp. 15-21.
346. Mollmann, K.-P. and Vollmer, M. (2007) Infrared thermal imaging as a tool in university physics education. Eur. J. Phys., 28, S37-S50.
347. Madding, R.P., Orlove, G.L., and Lyon, B.R. (2006) The importance of spatial resolution in IR thermography temperature measurement - three brief case studies. Inframation 2006, Proceedings vol. 7, pp. 245-251.
348. Giesecke, J.L. (2006) Adjusting severity criteria. Inframation 2006, Proceedings vol. 7, pp. 33-35.
349. Madding, R.P., Ayers, D., and Giesecke, J.L. (2002) Oil circuit breaker thermography. Inframation 2002, Proceedings vol. 3, pp. 41-47.
350. Goff, M.B. (2001) Substation equipment (bushings). Inframation 2001, Proceedings vol. 2, pp. 113-117.
351. Goff, M.B. (2008) The secrets of bushing oil level. Inframation 2008, Proceedings vol. 9, pp. 167-174.
352. Jessen, C. (2003) in Lehrbuch der Physiologie, 4th edn (ed. S. Klinke), Thieme, Stuttgart.
353. Bennaroch, E. (2007) Thermoregulation: recent concepts and remaining questions. Neurology, 69, 1293-1297.
354. Uematsu, S. (1988) Quantification of thermal asymmetry. Part 1: normal values and reproducibility. J. Neurosurg., break 69 (4), 553-555.
355. Leroy, P. and Filasky, R. (1992) in Evaluation and Treatment of Chronic Pain, 2nd edn (ed. G. Aronoff), Williams and Wilkins, Baltimore, London, Hong Kong, and Munich, pp. 202-212.
356. Cockburn, W. (2006) Common errors in medical thermal imaging. Inframation 2006, Proceedings Vol. 7, pp. 165-177.
357. Agarwal, K., Lange, A.-Ch., and Beck, H. (2007) Thermal imaging in healthy humans, what is normal skin temperature? Inframation 2007, Proceedings Vol. 8, pp. 399-403.
358. Agarwal, K., Spyra, P.-S., and Beck, H. (2008) Monitoring treatment effects in Osteomyelitis with the aid of infrared thermography. Inframation 2008, Proceedings Vol. 9, pp. 1-6.
359. Agarwal, K., Spyra, P.-S., and Beck, H. (2007) Thermographic imaging for interventional pain management. Inframation 2007, Proceedings Vol. 8, pp. 391-394.
360. Agarwal, K., Spyra, P.-S., and Beck, H. (2007) Thermal imaging provides a closer look at stellate blocks in pain management. Inframation 2007, Proceedings Vol. 8, pp. 391-394.
361. Agarwal, K., Spyra, P.-S., and Beck, H. (2008) Monitoring effects of sympathicolysis with infrared-thermography in patients with complex regional pain syndromes (CRPS). Inframation 2008, Proceedings Vol. 9, pp. 7-10.
362. Agarwal-Kozlowski, K., Lange, A.C., and Beck, H. (2009) Contact free infrared thermography for assessing effects of acupuncture: a randomized single-blinded placebo-controlled cross-over clinical trial. Anesthesiology, 111 (3), 632-639.
363. Litscher, G. (2005) Infrared Thermography Fails to Visualize Stimulation-induced Meridian-like Structures, BioMedical Engineering, online http://www.biomedical-engineeringonline. com/content/4/1/38, accessed 2010.
364. Mostovoy, A. (2008) Breast thermography and clinical applications. Inframation 2008, Proceedings Vol. 9, pp. 303-307.
365. Mostovoy, A. (2009) Clinical applications of medical thermography. Inframation 2009, Proceedings Vol. 10, pp. 23-27.
366. Kennedy, D.A., Lee, T., and Seely, D. (2009) A comparative review of thermography as a breast cancer screening technique. Integr. Cancer Ther., 8 (1), 9-16.
367. Cockburn, W. (2007) Functional thermography in diverse medical practice. Inframation 2007, Proceedings Vol. 8, pp. 215-224.
368. Bretz, P. and Lynch, R. (2007) Me lding Three emerging technologies: pharmacogenomics, digital infrared and argon gas, to eliminate surgery, chemotherapy and radiation in diagnosing and treating breast cancer. Inframation 2007, Proceedings Vol. 8, pp. 225-234.
369. Bretz, P., Lynch, R., and Dreisbach, Ph. (2009) Breast cancer in tough economic times - is there a new diagnostic and treatment paradigm? Inframation 2009, Proceedings Vol. 10, pp. 435-448.
370. Brioschi, M.L., Vargas, J.V., and Malafaia, O. (2004) Review of recent developments in thermographic applications in health care. Inframation 2004, Proceedings Vol. 5, pp. 9-17.
371. Brioschi, M.L., Silva, F.M.R.M., Matias, J.E.F., Dias, F.G., and Vargas, J.V.C. (2008) Infrared imaging for emergency medical services (EMS): using an IR camera to identify life-threatening emergencies. Inframation 2008, Proceedings Vol. 9, pp. 549-560.
372. Brioschi, M.L., Sanches, I., and Traple, F. (2007) 3D MRI/IR imaging fusion: a new medically useful computer tool. Inframation 2007, Proceedings Vol. 8, pp. 235-243.
373. Wu, M. (2004) Proceedings of the Thermosense XXVI (2004), Proceedings of the SPIE Vol. 5405, SPIE Press, Bellingham, pp. 98-105.
374. Tana, Y.H., Teoa, C.W., Onga, E., Tanb, L.B., and Sooa, M.J. (2004) Proceedings of the Thermosense XXVI (2004), Proceedings of SPIE Vol. 5405, SPIE Press, Bellingham, pp. 68-78.
375. Harper, D.L. (2000) The value of infrared thermography in the diagnosis and prognosis of injuries in animals. Inframation 2000, Proceedings Vol. 1, pp. 115-122.
376. Hopkins, P. and Bader, D.R. (2009) Mammals communicate, infrared listens utilizing infrared imaging for injury identification. Inframation 2009, Proceedings Vol. 10, pp. 179-188.
377. Reese, J. (2006) Applications of infrared imagery in the monitoring and diagnosis of zoo animals in anchorage, Alaska. Inframation 2006, Proceedings Vol. 7, pp. 145-150.
378. Church, J.S., Cook, N.J., and Schaefer, A.L. (2009) Recent applications of infrared thermography for animal welfare and veterinary research: everything from chicks to elephants. Inframation 2009, Proceedings Vol. 10, pp. 215-224.
379. www.unitedinfrared.com, www.equineir.com. (2010).
380. West, M. (2007) The odd couple . . . the professor and the thermographer. Inframation 2007, Proceedings Vol. 8, pp. 281-289.
381. Allison, J.N. (2007) Infrared goes on safari. Inframation 2007, Proceedings Vol. 8, pp. 353-359.
382. Whitcher, A. (2006) Hunting seals with infrared. Inframation 2006, Proceedings Vol. 7, pp. 155-164.
383. Reese-Deyoe, J. (2008) Practical applications of infrared thermography in the rescue, recovery, rehabilitation and release of wildlife following external exposure to oil. Inframation 2008, Proceedings Vol. 9. pp. 389-402.
384. Schwahn, B. (2009) Infrared thermal imaging to prevent bat mortality at wind farms. Inframation 2009, Proceedings Vol. 10, pp. 385-392.
385. Rentoul, M. (2007) The practice of detecting termites with infrared thermal imaging compared to conventional techniques. Inframation 2007, Proceedings Vol. 8. pp. 15-19.
386. Bruni, B. (2004) Three ways the pest professional can use infrared thermography. Inframation 2004, Proceedings Vol. 5, pp. 109-119.
387. Ono, M., Igarashi, T., and Ohno, E. (1995) Unusual thermal defense by a honeybee against mass attack by hornets. Nature, 377, 334-336.
388. Garza, D., Rolston, B., Johnston, T., Sungar, G., Ferguson, J., and Matheson, G. (2009) Heat-loss patterns in national football league players as measured by infrared thermography. Inframation 2009, Proceedings Vol. 9, pp. 541-547.
389. Vollmer, M. and Wogram, K. (2005) Zur Intonation von Blechblasinstrumenten bei sehr niedrigen Umgebungstemperaturen. Instrumentenbau-Zeitschrift - Musik International, 59 (3-4), 69-74.
390. Coram Populo! - A Mystery, International Dance Theatre Production, (2008), project proposal by Milǒs Vujkovíc, Arthouse Tacheles Berlin; contact: milosh@tacheles.de.
391. Vollmer, M., Vujkovíc, M., Trellu, Y., and Mollmann, K.-P. (2009) IR feedback loops to spotlights: thermography and contemporary dancing. Inframation 2009, Proceedings Vol. 10, pp. 89-97.
392. Dinwiddie, R.W. and Dean, S.W. (2006) Case study of IR reflectivity to detect and document the underdrawing of a 19th century oil painting. Proceedings of the Thermosense XXVIII, Proceedings of SPIE Vol. 6205, p. 620510 /1 - 12.
393. Grinzato, E. and Rosina, E. (2001) Infrared and thermal testing for conservation of historic buildings, in Nondestructive Testing Handbook, Infrared and Thermal Testing, Vol. 3, 3rd edn, Chapter 18.5 (ed. P.O. Moore), American Society for Nondestructive Testing, Inc., Columbus, p. 624-646.
394. Humphries, H.E. (2001) Infrared and thermal testing for conservation of fine art, in Nondestructive Testing Handbook, Infrared and Thermal Testing, Vol. 3, 3rd edn, Chapter 18.6 (ed. P.O. Moore), American Society for Nondestructive Testing, Inc., Columbus, pp. 647-658.
395. Poksinska, M., Wiecek, B., and Wyrwa, A. (2008) Thermovision investigation of frescos in Cistercian monastery in Lad (Poland). Proceedings of the 9th International Conference on Quantitative InfraRed Thermography in Krakow, QIRT 2008, pp. 653-658.
396. Poksinska, M., Cupa, A., and Socha-Bystron, S. (2008) Thermography in the investigation of gilding on historical wall paintings. Proceedings of the 9th International Conference on Quantitative InfraRed Thermography in Krakow, Poland, QIRT 2008, pp. 647-652.
397. Magyar, M. (2006) Thermography applied to cultural heritage. Inframation 2006, Proceedings Vol. 7. pp. 325-332.
398. Richards, A. (2001) Alien Vision, SPIE Press, Bellingham.
399. Rogalski, A. and Chrzanowski, K. (2006) Infrared devices and techniques, in Handbook of Optoelectronics, vol. 1 (eds J.R. Dakin and R.G.W. Brown), Taylor and Francis, New York, p. 653-691.
400. Zieli, M. and Milewski, S. (2006) Thermal images and spectral characteristics of objects that can be used to aid in rescue of shipwrecked people at sea. Inframation 2006, Proceedings Vol. 7, pp. 279-286.
401. Beier, K. and Gemperlein, H. (2004) Simulation of infrared detection range at fog conditions for enhanced vision systems. Civ. Aviat. Aerosp. Sci. Technol., 8, 63-71.
402. Richards, A. and Johnson, G. (2005) Proceedings of the Thermosense XXVII (2005), Proceedings of SPIE Vol. 5782, SPIE Press, Bellingham, pp. 19-28.
403. Duntley, S.Q. (1948) The reduction of apparent contrast by the atmosphere. J. Opt. Soc. Am., 38, 179-191.
404. Jha, A.R. (2000) Infrared Technology, John Wiley & Sons, Inc.
405. Mason, N. and Hughes, P. (2001) Introduction to Environmental Physics, Taylor and Francis.
406. Vollmer, M. and Gedzelman, S. (2006) Colors of the sun and moon: the role of the optical air mass. Eur. J. Phys., 27, 299-309.
407. Vollmer, M., Mollmann, K.-P., and Pinno, F. (2010) Measurements of sun and moon with IR cameras: effect of air mass. Inframation 2010, Proceedings Vol. 11, to be published.
408. Mollmann, K.-P., Pinno, F., and Vollmer, M. (2008) Night sky radiant cooling - influence on outdoor thermal imaging analysis. Inframation 2008, Proceedings Vol. 9, pp. 279-295.
409. Martin, M. and Berdahl, P. (1984) Characteristics of infrared sky radiation in the United States. Solar Energy, 33, 321-336.
410. Simser, S. (2008) Utilization of thermal infrared technology on wildfires in Alberta. Inframation 2008, Proceedings Vol. 9, pp. 417-428.
411. http://activefiremaps.fs.fed.us (2010).
412. Birnie, R.W. (1973) Infrared radiation thermometry of Guatemalan volcanoes. Bull. Volcanol., 37, 1-36.
413. Calvari, S., Lodato, L., and Spampinato, L. (2004) Proceedings of the Thermosense XXVI (2004), Proceedings of SPIE Vol. 5405, SPIE Press, Bellingham, pp. 199-203.
414. Calvari, S., Spampinato, L., Lodato, L., Harris, A.J.L., Patrick, M.R., Dehn, J., Burton, M.R., and Andronico, D. (2005) Chronology and complex volcanic processes during the 2002-2003 flank eruption at Stromboli volcano (Italy) reconstructed from direct observations and surveys with a handheld thermal camera. J. Geophys. Res., 110, B02201, doi: 10.1029/2004JB003129.
415. Calvari, S., Spampinato, L., and Lodato, L. (2006) The 5 April 2003 vulcanian paroxysmal explosion at Stromboli volcano (Italy) from field observations and thermal data. J. Volcanol. Geotherm. Res., 149, 160-175.
416. Sawyer, G.M. and Burton, M.R. (2006) Effects of a volcanic plume on thermal imaging data. Geophys. Res. Lett., 33, L14311.
417. Spampinato, L., Calvari, S., Oppenheimer, C., and Lodato, L. (2008) Shallow magma transport for the 2002-2003 Mt. Etna eruption inferred from thermal infrared surveys. J. Volcanol. Geotherm. Res., 177, 301-312.
418. Calvari, S., Coltelli, M., Neri, M., Pompilio, M., and Scribano, V. (1994) The 1991-1993 Etna eruption: chronology and lava flow-field evolution. Acta Vulcanolo., 4, 1-14.