Non-Linear Finite Element Analysis of Solids and Structures: Second Edition

Non-Linear Finite Element Analysis of Solids and Structures: Second Edition

Volumn , Issue , 2012, Pages

  de Borst, René ^a   Crisfield, Mike A ^b   Remmers, Joris J C ^c   Verhoosel, Clemens V ^c  

^a UNIVERSITY OF GLASGOW   (United Kingdom)

^b IMPERIAL COLLEGE LONDON   (United Kingdom)

^c EINDHOVEN UNIVERSITY OF TECHNOLOGY   (Netherlands)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 84891583789     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1002/9781118375938     Document Type: Book

References (501)

1. Fung YC 1965 Foundations of Solid Mechanics. Prentice-Hall.
2. Golub GH and van Loan CF 1983 Matrix Computations. The Johns Hopkins University Press.
3. Noble B and Daniel JW 1969 Applied Linear Algebra. Prentice-Hall.
4. Ortega JM 1987 Matrix Theory - A Second Course. Plenum Press.
5. Ramsey N 1994 Literate programming simplified. IEEE Software 11,97-105.
6. Saad Y 1996 Iterative Methods for Sparse Linear Systems. International Thomson Publishing.
7. MacNeal R and Harder R 1985 A proposed standard set of problems to test finite element accuracy. Finite Elements in Analysis and Design 1,3-20.
8. Bathe KJ, Ramm E and Wilson EL 1975 Finite element formulations for large deformation dynamic analysis. International Journal for Numerical Methods in Engineering 9,353-386.
9. Bonet J and Wood RD 1997 Nonlinear Continuum Mechanics for Finite Element Analysis. Cambridge University Press.
10. Chatelin F 1993 Eigenvalues of Matrices. John Wiley & Sons, Ltd.
11. Crisfield MA and Moita GF 1996a A co-rotational formulation for 2-D continua including incompatible modes. International Journal for Numerical Methods in Engineering 39,2619-2933.
12. Crisfield MA and Moita GF 1996b A finite element formulation for 3-D continua using the co-rotational technique. International Journal for Numerical Methods in Engineering 39,3775-3792.
13. Fung YC 1965 Foundations of Solid Mechanics. Prentice-Hall.
14. Golub GH and van Loan CF 1983 Matrix Computations. The Johns Hopkins University Press.
15. Holzapfel GA 2000 Nonlinear Solid Mechanics. John Wiley & Sons, Ltd.
16. Jetteur PH and Cescotto S 1991 A mixed finite element for the analysis of large inelastic strains. International Journal for Numerical Methods in Engineering 31,229-239.
17. Malvern L 1969 Introduction to the Mechanics of a Continuous Medium. Prentice-Hall.
18. Ogden RW 1984 Non-Linear Elastic Deformations. Ellis Horwood.
19. Yaw LL, Sukumar N and Kunnath SK 2009 Meshfree co-rotational formulation for two-dimensional continua. International Journal for Numerical Methods in Engineering 79,979-1003.
20. Batoz JL and Dhatt G 1979 Incremental displacement algorithms for nonlinear problems. International Journal for Numerical Methods in Engineering 14,1262-1267.
21. Bergan PG, Horrigmoe G, Krakeland B and Soreide TH 1978 Solution techniques for non-linear finite element problems. International Journal for Numerical Methods in Engineering 12,1677-1696.
22. Crisfield MA 1979 A faster modified Newton-Raphson iteration. Computer Methods in Applied Mechanics and Engineering 20,267-278.
23. Crisfield MA 1981 A fast incremental/iterative solution procedure that handles snap-through. Computers and Structures 13,55-62.
24. Crisfield MA 1983 An arc-length method including line searches and accelerations. International Journal for Numerical Methods in Engineering 19,1269-1289.
25. de Borst R 1987 Computation of post-bifurcation and post-failure behaviour of strain-softening solids. Computers & Structures 25,211-224.
26. Dennis JE and More JJ 1977 Quasi-Newton methods, motivation and theory. SIAM Review 19,46-89.
27. Dennis JE and Schnabel RB 1983 Numerical Methods for Unconstrained Optimization and Nonlinear Equations. Prentice-Hall.
28. Geers MGD 1999a Enhanced solution control for physically and geometrically non-linear problems. Part I-the subplane control method. International Journal for Numerical Methods in Engineering 46,177-204.
29. Geers MGD 1999b Enhanced solution control for physically and geometrically non-linear problems. Part II- comparative performance analysis. International Journal for Numerical Methods in Engineering 46,205-230.
30. Hill R 1959 Some basic principles in the mechanics of solids without a natural time. Journal of the Mechanics and Physics of Solids 7,209-225.
31. Koiter WT 1945 Over de Stabiliteit van het Elastisch Evenwicht (On the Stability of Elastic Equilibrium). PhD thesis, Delft University of Technology, Delft.
32. Koiter WT 1969 On the thermodynamic background of elastic stability theory, in Problems of Hydrodynamics and Continuum Mechanics (ed. Radok JRM), pp. 423-433. SIAM.
33. MacNeal R and Harder R 1985 A proposed standard set of problems to test finite element accuracy. Finite Elements in Analysis and Design 1,3-20.
34. Matthies H and Strang G 1979 The solution of nonlinear finite element equations. International Journal for Numerical Methods in Engineering 14,1613-1625.
35. Ramm E 1981 Strategies for tracing ther nonlinear response near limit points, in Nonlinear Finite Element Analysis in Structural Mechanics (eds. Wunderlich W, Stein E and Bathe KJ) , pp. 63-89. Springer.
36. Riks E 1972 The application of Newton's method to the problem of elastic stability. Journal of Applied Mechanics 39,1060-1066.
37. Riks E 1984 Some computational aspects of the stability analysis of nonlinear structures. Computer Methods in Applied Mechanics and Engineering 47,219-259.
38. Riks E, Rankin CC and Brogan FA 1996 On the solution of mode jumping phenomena in thin-walled shell structures. Computer Methods in Applied Mechanics and Engineering 136,59-92.
39. Verhoosel CV, Remmers JJC and Gutiérrez MA 2009 A dissipation-based arc-length method for robust simulation of brittle and ductile failure. International Journal for Numerical Methods in Engineering 77,1290-1321.
40. Wriggers P and Simo JC 1990 A general procedure for the direct computation of turning and bifurcation points. International Journal for Numerical Methods in Engineering 30,155-176.
41. Bathe KJ 1982 Finite Element Procedures in Engineering Analysis. Prentice Hall, Inc.
42. Belytschko T 1983 An overview of semidiscretization and time integration procedures, in Computational Methods for Transient Analysis (eds. Belytschko T and Hughes TJR), vol. 1 of Computational Methods in Mechanics, pp. 1-65. North-Holland.
43. Belytschko T, Chiapetta RL and Bartel HD 1976 Efficient large scale non-linear transient analysis by finite elements. International Journal for Numerical Methods in Engineering 10,579-596.
44. Belytschko T, Ong SJ, Liu WK and Kennedy JM 1984 Hourglass control in linear and nonlinear problems. Computer Methods in Applied Mechanics and Engineering 43,251-276.
45. Bergan PG and Mollestad E 1985 An automatic time-stepping algorithm for dynamic problems. Computer Methods in Applied Mechanics and Engineering 49,299-318.
46. Cho SS, Huh H and Park KC 2011 A time-discontinuous implicit variational integrator for stress wave propagation in solids. Computer Methods in Applied Mechanics and Engineering 200,649-664.
47. Courant R, Friedrichs K and Lewy H 1928 Über die partiellen Differenzgleichungen der mathematischen Physik (On the partial difference equations of mathematical physics). Mathematischen Annalen 100,32-74.
48. Crisfield MA and Shi J 1994 A co-rotational element/time integration strategy for non-linear dynamics. International Journal for Numerical Methods in Engineering 37,1897-1913.
49. Daniel WJT 1998 A study of the stability of subcycling algorithms in structural dynamics. Computer Methods in Applied Mechanics and Engineering 156,1-13.
50. Daniel WJT 2003a Explicit/implicit partitioning and a new explicit form of the generalized alpha method. Communications in Numerical Methods in Engineering 19,909-920.
51. Daniel WJT 2003b A partial velocity approach to subcycling structural dynamics. Computer Methods in Applied Mechanics and Engineering 192,375-394.
52. Flanagan DP and Belytschko T 1981 Auniform strain hexahedron and quadrilateral with orthogonal hourglass control. International Journal for Numerical Methods in Engineering 17,679-706.
53. Freund LB 1998 Dynamic Fracture Mechanics. Cambridge University Press.
54. Galvanetto U and Crisfield MA 1996 An energy conserving co-rotational procedure for the dynamics of planar structures. International Journal for Numerical Methods in Engineering 39,2265-2287.
55. Hilber HM, Hughes TJR and Taylor RL 1977 Improved numerical dissipation for time integration algorithms. Earthquake Engineering and Structural Dynamics 5,283-292.
56. Hinton E, Rock A and Zienkiewicz OC 1970 A note on mass lumping and related processes in the finite-element method. International Journal for Earthquake Engineering and Structural Dynamics 5,245-249.
57. Houbolt JC 1950 A recurrence matrix solution for the dynamic response of elastic aircraft. Journal of the Aeronautical Sciences 17,540-550.
58. Huerta A and Pijaudier-Cabot G 1994 Discretization influence on regularization by two localization limiters. ASCE Journal of Engineering Mechanics 120,1198-1218.
59. Hughes TJR 1983 Analysis of transient algorithms with particular reference to stability behavior, in Computational Methods for Transient Analysis (eds. Belytschk oT and Hughes TJR), vol. 1 of Computational Methods in Mechanics, pp. 67-155. North-Holland.
60. Hughes TJR 1987 The Finite Element Methods: Linear Static and Dynamic Finite Element Analysis. Prentice Hall, Inc.
61. Hughes TJR and Hulbert GM 1988 Space-time finite element methods for elastodynamics: formulations and error estimates. Computer Methods in Applied Mechanics and Engineering 66,339-363.
62. Hughes TJR and Liu WK 1978a Implicit-explicit finite elements in transient analysis: implementation and numerical examples. Journal of Applied Mechanics 45,375-378.
63. Hughes TJR and Liu WK 1978b Implicit-explicit finite elements in transient analysis: stability theory. Journal of Applied Mechanics 45,371-374.
64. Hughes TJR, Liu WK and Caughey TK 1978 Finite element methods for nonlinear elastodynamics which conserve energy. Journal of Applied Mechanics 45,366-370.
65. Hulbert GM 2004 Computational structural dynamics, in The Encyclopedia of Computational Mechanics (eds. Stein E, de Borst R and Hughes TJR), vol. II, pp. 169-193. John Wiley & Sons, Ltd.
66. Kosloff D and Frazier GA 1978 Treatment of hourglass patterns in low order finite element codes. International Journal for Numerical and Analytical Methods in Geomechanics 2,57-72.
67. Kuhl D and Ramm E 1999 Generalized energy-momentum method for non-linear adaptive shell dynamics. Computer Methods in Applied Mechanics and Engineering 178,343-366.
68. Kulkarni M, Belytschko T and Bayliss A 1995 Stability and error analysis for time integrators applied to strainsoftening materials. Computer Methods in Applied Mechanics and Engineering 124,335-363.
69. Miranda I, Ferencz RM and Hughes TJR 1989 Improved implicit-explicit time integration method for structural dynamics. Earthquake Engineering and Structural Dynamics 18,643-653.
70. Newmark NM 1959 A method of computation for structural dynamics. ASCE Journal of the Engineering Mechanics Division 85,67-94.
71. Park KC 1975 An improved stiffly stable method for direct integration of nonlinear structural dynamic equations. Journal of Applied Mechanics 42,464-470.
72. Park KC and Underwood PG 1980 A variable central difference method for structural dynamic analysi. Part 1: Theoretical aspects. Computer Methods in Applied Mechanics and Engineering 22,241-258.
73. Simo JC and Tarnow N 1992 The discrete energy-momentum method. Conserving algorithms for nonlinear elastodynamics. Zeitschrift für Angewandte Mathematic und Physik 43,757-792.
74. Simo JC and Tarnow N 1994 A new energy conserving algorithm for the nonlinear dynamics of shells. International Journal for Numerical Methods in Engineering 37,2527-2549.
75. Simo JC, Tarnow N and Doblaré M 1995 Nonlinear dynamics of 3-D rods: exact energy and momentum conserving algorithms. International Journal for Numerical Methods in Engineering 38,1431-1474.
76. Sluys LJ and de Borst R 1994 Dispersive properties of gradient-dependent and rate-dependent media. Mechanics of Materials 18,131-149.
77. Sluys LJ, Cauvern M and de Borst R 1995 Discretization influence in strain-softening problems. Engineering Computations 12,209-228.
78. Underwood PG and Park KC 1980 A variable central difference method for structural dynamic analysis. Part 2: Implementation and performance evaluation. Computer Methods in Applied Mechanics and Engineering 23,259-279.
79. Whitham GB 1974 Linear and Nonlinear Waves. John Wiley & Sons, Ltd.
80. Wood WL 1990 Practical Time-Stepping Schemes. Clarendon Press.
81. Wu YS and Smolinski P 2000 A multi-time step integration algorithm for structural dynamics based on the modified trapezoid rule. Computer Methods in Applied Mechanics and Engineering 187,641-660.
82. XieYM and Wood WL 1993 On the accuracy of time-stepping schemes for dynamic problems with negative stiffness. Communications in Numerical Methods in Engineering 9,131-137.
83. Xu XP and Needleman A 1994 Numerical simulations of fast crack growth in brittle solids. Journal of the Mechanics and Physics of Solids 42,1397-1434.
84. Armero F and Garikipati K 1996 An analysis of strong discontinuities in multiplicative finite strain plasticity and their relation with the numerical simulation of strain localization in solids. International Journal of Solids and Structures 33,2863-2885.
85. Barenblatt GI 1962 The mathematical theory of equilibrium cracks in brittle fracture. Advances in Applied Mechanics 7,55-129.
86. Batdorf SB and Budiansky B 1949 A mathematical theory of plasticity based on the concept of slip. Technical report, National Advisory Committee for Aeronautics, Washington, DC.
87. Bathe KJ 1982 Finite Element Procedures in Engineering Analysis. Prentice Hall, Inc.
88. Bažant ZP and Gambarova P 1984 Crack shear in concrete: Crack band microplane model. ASCE Journal of Structural Engineering 110,2015-2036.
89. Bažant ZP and Oh B 1983 Crack band theory for fracture of concrete. RILEM Materials and Structures 16,155-177.
90. Bažant ZP and Prat P 1988 Microplane model for brittle plastic material. Part i: Theory. Part ii: Verification. ASCE Journal of Engineering Mechanics 114,1672-1702.
91. Belytschko T, Fish J and Engelman BE 1988 A finite element with embedded localization zones. Computer Methods in Applied Mechanics and Engineering 70,59-89.
92. Belytschko T, Lu YY and Gu L 1994 Element-free Galerkin methods. International Journal for Numerical Methods in Engineering 37,229-256.
93. Benallal A, Billardon R and Geymonat G 1988 Some mathematical aspects of the damage softening rate problem, in Cracking and Damage (eds Mazars J and Bažant ZP), pp. 247-258. Elsevier.
94. Borja RI 2000 Afinite element model for strain localization analysis of strongly discontinuous fields based on standard Galerkin approximation. Computer Methods in Applied Mechanics and Engineering 190,1529-1549.
95. Chandra N, Li H, Shet C and Ghonem H 2002 Some issues in the application of cohesive zone models for metal-ceramic interfaces. International Journal of Solids and Structures 39,2827-2855.
96. Cope RJ, Rao PV, Clark LA and Norris P 1980 Modelling of reinforced concrete behaviour for finite element analysis of bridge slabs, in Numerical Methods for Non-linear Problems (eds Taylor C, Hinton E and Owen DRJ), pp. 457-470, Pineridge Press.
97. de Borst R 1987 Smeared cracking, plasticity, creep, and thermal loading - a unified approach. Computer Methods in Applied Mechanics and Engineering 62,89-110.
98. de Borst R 1991 The zero-normal-stress condition in plane-stress and shell elasto-plasticity. Communications in Applied Numerical Methods 7,29-33.
99. de Borst R 1993 A generalization of j2-flow theory for polar continua. Computer Methods in Applied Mechanics and Engineering 103,347-362.
100. de Borst R and Nauta P 1985 Non-orthogonal cracks in a smeared finite element model. Engineering Computations 2,35-46.
101. de Borst R, Benallal A and Heeres OM 1996 A gradient-enhanced damage approach to fracture. Journal de Physique IV C6,491-502.
102. de Vree HPJ, Brekelmans WAM and van Gils MAJ 1995 Comparison of nonlocal approaches in continuum damage mechanics. Computers and Structures 55,581-588.
103. Dugdale DS 1960 Yielding of steel sheets containing slits. Journal of the Mechanics and Physics of Solids 8,100-108.
104. Dvorkin EN, Cuitino AM and Gioia G 1990 Finite elements with dispacement interpolated embedded localization lines insensitive to mesh size and distortions. International Journal for Numerical Methods in Engineering 30,541-564.
105. Feenstra PH and de Borst R 1995a Constitutive model for reinforced concrete. ASCEJournal of Engineering Mechanics 121,587-595.
106. Feenstra PH and de Borst R 1995b A plasticity model for mode 1 cracking in concrete. International Journal for Numerical Methods in Engineering 38,2509-2529.
107. Gasser TC and Holzapfel GA 2003 Geometrically non-linear and consistently embedded strong discontinuity models for 3d problems with an application to the dissection analysis of soft biological tissues. Computer Methods in Applied Mechanics and Engineering 192,5059-5098.
108. Hill R 1958 A general theory of uniqueness and stability in elastic-plastic solids. Journal of the Mechanics and Physics of Solids 6,236-249.
109. Hill R 1962 Acceleration waves in solid. Journal of the Mechanics and Physics of Solids 10,1-16.
110. Hillerborg A, Modeér M and Petersson PE 1976 Analysis of crack formation and crack growth in concrete by means of fracture mechanics and finite elements. Cement and Concrete Research 6,773-782.
111. Hughes TJR 1987 The Finite Element Methods: Linear Static and Dynamic Finite Element Analysis. Prentice Hall, Inc.
112. Hutchinson JW and Evans AG 2000 Mechanics of materials: top-down approaches to fracture. Acta Materialia 48,125-135.
113. Ingraffea AR and Saouma V 1985 Numerical modelling of discrete crack propagation in reinforced and plain concrete, in Fracture Mechanics of Concrete (eds Sih GC and DiTommaso A), pp. 171-225. Martinus Nijhoff.
114. Jirasek M 2000 Comparative study on finite elements with embedded discontinuities. Computer Methods in Applied Mechanics and Engineering 188,307-330.
115. Klisinski M, Runesson K and Sture S 1991 Finite element with inner softening band. ASCE Journal of Engineering Mechanics 117,575-587.
116. Koiter WT 1969 On the thermodynamic background of elastic stability theory, in Problems of Hydrodynamics and Continuum Mechanics (ed. Radok JRM), pp. 423-433. SIAM.
117. Kuhl E and Ramm E 1998 On the linearization of the microplane model. Mechanics of Cohesive-frictional Materials 3,343-364.
118. Lemaitre J and Chaboche JL 1990 Mechanics of Solid Materials. Cambridge University Press.
119. Lotfi HR and Shing PB 1995 Embedded representation of fracture in concrete with mixed elements. International Journal for Numerical Methods in Engineering 38,1307-1325.
120. Maier G and Hueckel T 1979 Nonassociated and coupled flow rules of elastoplasticity for rock-like materials.. International Journal of Rock Mechanics and Mining Sciences & Geomechanical Abstracts 16,77-92.
121. Mazars J and Pijaudier-Cabot G 1989 Continuum damage theory - application to concrete. ASCE Journal of Engineering Mechanics 115,345-365.
122. Miehe C and Schotte J 2004 Crystal plasticity and the evolution of polycrystalline microstructure, in The Encyclopedia of Computational Mechanics (eds Stein E, de Borst R and Hughes TJR), vol. II, pp. 267-289. John Wiley & Sons, Ltd.
123. Needleman A 1987 Material rate dependence and mesh sensitivity in localization problems. Computer Methods in Applied Mechanics and Engineering 28,859-878.
124. Ngo D and Scordelis AC 1967 Finite element analysis of reinforced concrete beams. Journal of the American Concrete Institute 64,152-163.
125. Oliver J 1989 A consistent characteristic length for smeared cracking models. International Journal for Numerical Methods in Engineering 28,461-474.
126. Oliver J 1996 Modelling strong discontinuities in solid mechanics via strain softening constitutive relations. Part i: Fundamentals. Part ii: Numerical simulation. International Journal for Numerical Methods in Engineering 39,3575-2724.
127. Ortiz M, Leroy Y and Needleman A 1987 A finite element method for localized failure analysis. Computer Methods in Applied Mechanics and Engineering 61,189-214.
128. Pamin J, Askes H and de Borst R 2003 Two gradient plasticity theories discretized with the element-free Galerkin method. Computer Methods in Applied Mechanics and Engineering 192,2377-2407.
129. Peerlings RHJ, de Borst R, Brekelmans WAM and de Vree HPJ 1996 Gradient-enhanced damage for quasi-brittle materials. International Journal for Numerical Methods in Engineering 39,3391-3403.
130. Peerlings RHJ, de Borst R, Brekelmans WAM and Geers MGD 1998 Gradient-enhanced modelling of concrete fracture. Mechanics of Cohesive-frictional Materials 3,323-342.
131. Peerlings RHJ, Geers MGD, de Borst R and BrekelmansWAM 2001 A critical comparison of nonlocal and gradientenhanced softening continua. International Journal of Solids and Structures 38,7723-7746.
132. Pietruszczak S and Mróz Z 1981 Finite element analysis of deformation of strain softening materials. International Journal for Numerical Methods in Engineering 17,337-334.
133. Pijaudier-Cabot G and Bažant ZP 1987 Nonlocal damage theory. ASCE Journal of Engineering Mechanics 113,1512-1533.
134. Pijaudier-Cabot G and Huerta A 1991 Finite element analysis of bifurcation in nonlocal strain softening solids. Computer Methods in Applied Mechanics and Engineering 90,905-919.
135. Rashid YR 1968 Analysis of reinforced concrete pressure vessels. Nuclear Engineering and Design 7,334-344.
136. Reinhardt HW and Cornelissen HAW 1984 Post-peak cyclic behaviour of concrete in uniaxial and alternating tensile and compressive loading. Cement and Concrete Research 14,263-270.
137. Rots JG 1991 Smeared and discrete representations of localized fracture. International Journal of Fracture 51,45-59.
138. Rudnicki JW and Rice JR 1974 Conditions for the localization of deformation in pressure sensitive dilatant materials. Journal of the Mechanics and Physics of Solids 23,371-394.
139. Simo JC and Ju JW 1987 Strain- and stress-based continuum damage formulations. Part I: Formulation. Part II: Computational aspects. International Journal of Solids and Structures 23,821-869.
140. Simo JC and Rifai MS 1990 A class of mixed assumed strain methods and the method of incompatible modes. International Journal for Numerical Methods in Engineering 29,1595-1638.
141. Simo JC, Oliver J and Armero F 1993 An analysis of strong discontinuities induced by softening relations in rateindependent solids. Computational Mechanics 12,277-296.
142. Sluys LJ and Berends AH 1998 Discontinuous failure analysis for mode 1 and mode 2 localization problems. International Journal of Solids and Structures 35,4257-4274.
143. Sluys LJ and de Borst R 1992 Wave propagation and localisation in a rate-dependent cracked medium - model formulation and one-dimensional examples. International Journal of Solids and Structures 29,2945-2958.
144. Suidan M and Schnobrich WC 1973 Finite element analysis of reinforced concrete. ASCE Journal of the Structural Division 99,2109-2122.
145. Tvergaard V and Hutchinson JW 1992 The influence of plasticity on mixed mode interface toughness. Journal of the Mechanics and Physics of Solids 40,1377-1397.
146. Tvergaard V and Hutchinson JW 1993 The relation between crack growth resistance and fracture process parameters in elastic-plastic solids. Journal of the Mechanics and Physics of Solids 41,1119-1135.
147. Vardoulakis I and Sulem J 1995 Bifurcation Analysis in Geomechanics. Blackie.
148. Wells GN and Sluys LJ 2001a Analysis of slip planes in three-dimensional solids. Computer Methods in Applied Mechanics and Engineering 190,3591-3606.
149. Wells GN and Sluys LJ 2001b Three-dimensional embedded discontinuity model for brittle fracture. International Journal of Solids and Structures 38,897-913.
150. Zienkiewicz OC and Pande GN 1977 Time-dependent multi-laminate model for rocks - a numerical study of deformation and failure of rock masses. International Journal for Numerical and Analytical Methods in Geomechanics 1,219-247.
151. Auricchio F and Taylor RL 1995 Two material models for cyclic plasticity: Nonlinear kinematic hardening and generalized plasticity. International Journal of Plasticity 11,65-98.
152. Belytschko T, Ong SJ, Liu WK and Kennedy JM 1984 Hourglass control in linear and nonlinear problems. Computer Methods in Applied Mechanics and Engineering 43,251-276.
153. Besseling JF 1958 A theory of elastic, plastic and creep deformations of an initially isotropic material showing anisotropic strain-hardening, creep and recovery, and secondary creep. Journal of Applied Mechanics 24,529-536.
154. Bushnell D 1977 A strategy for the solution of problems involving large deflections, plasticity and creep. International Journal for Numerical Methods in Engineering 11,682-708.
155. Coulomb CA 1776 Essai sur une application des regles de maximis et minimis a quelques problemes de statique, relatifs a l'architecture. Mémoires de Mathématique et de Physique présentés a l'Académie Royale des Sciences par divers Savans 7,343-382.
156. Crisfield MA 1987 Plasticity computations using the Mohr-Coulomb yield criterion. Engineering Computations 4,300-308.
157. Crisfield MA and Wills J 1989 Analysis of r/c panels using different concrete models. ASCE Journal of Engineering Mechanics 115,578-597.
158. Dafalias YF and Popov EP 1975 Plastic internal variables formalism of cyclic plasticity. Journal of Applied Mechanics 32,645-651.
159. de Borst R 1987 Computation of post-bifurcation and post-failure behaviour of strain-softening solids. Computers & Structures 25,211-224.
160. de Borst R 1989 Numerical methods for bifurcation analysis in geomechanics. Ingenieur-Archiv 59,160-174.
161. de Borst R 1991 The zero-normal-stress condition in plane-stress and shell elasto-plasticity. Communications in Applied Numerical Methods 7,29-33.
162. de Borst R and Feenstra PH 1990 Studies in anisotropic plasticity with reference. International Journal for Numerical Methods in Engineering 29,315-336.
163. de Borst R and Heeres OM 2002 A unified approach to the implicit integration of standard, non-standard and viscous plasticity models. International Journal for Numerical and Analytical Methods in Geomechanics 26,1059-1070.
164. de Borst R and Mühlhaus HB 1992 Gradient-dependent plasticity: formulation and algorithmic aspects. International Journal for Numerical Methods in Engineering 35,521-539.
165. de Borst R and Nauta P 1985 Non-orthogonal cracks in a smeared finite element model. Engineering Computations 2,35-46.
166. de Borst R and Vermeer PA 1984 Possibilities and limitations of finite elements for limit analysis. Geotechnique 34,199-210.
167. de Borst R, Pamin J and Geers MGD 1999 On coupled gradient-dependent plasticity and damage theories with a view to localization analysis. European Journal of Mechanics: A/Solids 18,939-962.
168. de Borst R, Panka J and Bićanić N 1991 A note on singularity indicators for Mohr-Coulomb type yield criteria. Computers & Structures 39,219-220.
169. de Souza Neto EA, Perić D and Owen DRJ 2008 Computational Methods for Plasticity: Theory and Applications. John Wiley & Sons, Ltd.
170. Dennis JE and Schnabel RB 1983 Numerical Methods for Unconstrained Optimization and Nonlinear Equations. Prentice-Hall.
171. Drucker DC and Prager W 1952 Soil mechanics and plastic analysis for limit design. Quarterly of Applied Mathematics 10,157-165.
172. Feenstra PH and de Borst R 1996 A composite plasticity model for concrete. International Journal of Solids and Structures 33,707-730.
173. Flanagan DP and Belytschko T 1981 Auniform strain hexahedron and quadrilateral with orthogonal hourglass control. International Journal for Numerical Methods in Engineering 17,679-706.
174. Hashagen F and de Borst R 2001 Enhancement of the Hoffman yield criterion with an anisotropic hardening model. Composite Structures 79,637-651.
175. Hill R 1950 The Mathematical Theory of Plasticity. Oxford University Press.
176. Hoffman O 1967 The brittle strength of orthotropic materials. Journal of Composite Materials 1,200-206.
177. Hughes TJR 1980 Generalization of selective integration procedures to anisotropic and nonlinear media. International Journal for Numerical Methods in Engineering 15,1413-1418.
178. Khan AS and Huang S 1995 Continuum Theory of Plasticity. John Wiley & Sons, Ltd.
179. Koiter WT 1953 Stress-strain relations, uniqueness and variational theorems for elastic-plastic materials with a singular yield surface. Quarterly of Applied Mathematics 11,350-354.
180. Koiter WT 1960 General theorems of elastic-plastic solids, in Progress in Solid Mechanics (eds Sheddon IN and Hill R), vol. 1, pp. 165-221. North-Holland.
181. Kosloff D and Frazier GA 1978 Treatment of hourglass patterns in low order finite element codes. International Journal for Numerical and Analytical Methods in Geomechanics 2,57-72.
182. Krieg RD 1975 A practical two-surface plasticity theory. Journal of Applied Mechanics 31,641-646.
183. Krieg RD and Krieg DB 1977 Accuracies of numerical solution methods for the elastic-perfectly plastic model. Journal of Pressure Vessel Technology 99,510-515.
184. Kupfer HB and Gerstle KH 1973 Behavior of concrete under biaxial stresses. ASCE Journal of Engineering Mechanics 99,853-866.
185. Larsson R and Runesson K 1996 Implicit integration and consistent linearization for yield criteria of the Mohr-Coulomb type. Mechanics of Cohesive-frictional Materials 1,367-383.
186. Lubliner J 1990 Plasticity Theory. Macmillan.
187. Maier J and Thürlimann B 1985 Bruchversuche an Stahlbetonscheiben. Technical report, Eidgenössische Technische Hochschule, Zürich.
188. Matthies HG 1989 A decomposition method for the integration of the elastic-plastic rate problem. International Journal for Numerical Methods in Engineering 28,1-11.
189. Mohr O 1900 Welche Umstände bedingen die Elastizitätsgrenze und den Bruch eines Materials. Civilingenieur: Zeitschrift des Vereins deutscher Ingenieure 44-45,1524-1530,1572-1577.
190. Mróz Z 1967 On the description of anisotropic workhardening. Journal of the Mechanics and Physics of Solids 15,163-175.
191. Nagtegaal JC, Parks DM and Rice JR 1974 On numerically accurate finite element solutions in the fully plastic range. Computer Methods in Applied Mechanics and Engineering 4,113-135.
192. Nayak GC and Zienkiewicz OC 1972 Elasto-plastic stress analysis. a generalization for various constitutive relations including strain softening. International Journal for Numerical Methods in Engineering 5,113-135.
193. Needleman A and Tvergaard V 1987 An analysis of ductile rupture modes at a crack tip. Journal of the Mechanics and Physics of Solids 35,151-183.
194. Ogden RW 1984 Non-Linear Elastic Deformations. Ellis Horwood.
195. Ortiz M and Martin JB 1989 Symmetry-preserving return mapping algorithms and incrementally extremal paths: a unification of concepts. International Journal for Numerical Methods in Engineering 28,1839-1854.
196. Ortiz M and Popov EP 1985 Accuracy and stability of integration algorithms for elastoplastic constitutive relations. International Journal for Numerical Methods in Engineering 21,1561-1576.
197. Ortiz M and Simo JC 1986 An analysis of a new class of integration algorithms for elastoplastic constitutive relations. International Journal for Numerical Methods in Engineering 23,353-366.
198. Owen DRJ and Hinton E 1980 Finite Elements in Plasticity: Theory and Practice. Pineridge Press.
199. Pastor M, Zienkiewicz OC and Chan AC 1990 Generalized plasticity and the modeling of soil behavior. International Journal for Numerical and Analytical Methods in Geomechanics 14,151-190.
200. Pérez-Foguet A, Rodríguez-Ferran A and Huerta A 2001 Consistent tangent matrices for substepping schemes. Computer Methods in Applied Mechanics and Engineering 190,4627-4647.
201. Perić D and de Souza Neto EA 1999 A new computational model for tresca plasticity at finite strains with optimal parametrization in the principal space. Computer Methods in Applied Mechanics and Engineering 171,463-489.
202. Prager W 1955 The theory of plasticity: a survey of recent achievements. Institution of Mechanical Engineers 169,41-57.
203. Pramono E and Willam KJ 1989 Implicit integration of composite yield surfaces with corners. Engineering Computations 7,186-197.
204. Rankine WJM 1858 Manual of Applied Mechanics. R. Griffin and Co.
205. Rice JR and Tracey DM 1971 Computational fracture mechanics, in Proceedings of the Symposium on Numerical and Computational Methods in Structural Mechanics (ed. Fenves SJ), pp. 585-624. Academic Press.
206. Rouainia M and Wood DM 2000 An implicit constitutive algorithm for finite strain cam-clay elasto-plastic model. Mechanics of Cohesive-frictional Material 5,469-489.
207. Runesson K, Samuelsson A and Bernspang L 1986 Numerical technique in plasticity including solution advancement control. International Journal for Numerical Methods in Engineering 22,769-788.
208. Schellekens JCJ and de Borst R 1990 The use of the Hoffman yield criterion in finite element analysis of anisotropic composites. Computers & Structures 37,1087-1096.
209. Schreyer HL, Kulak RF and Kramer JM 1979 Accurate numerical solutions for elastic-plastic models. Journal of Pressure Vessel Technology 101,226-234.
210. Simo JC and Hughes TJR 1998 Computational Inelasticity: Theory and Applications. Springer.
211. Simo JC and Rifai MS 1990 A class of mixed assumed strain methods and the method of incompatible modes. International Journal for Numerical Methods in Engineering 29,1595-1638.
212. Simo JC and Taylor RL 1985 Consistent tangent operators for rate-independent plasticity. Computer Methods in Applied Mechanics and Engineering 48,101-118.
213. Simo JC,Kennedy JG and Govindjee S 1988 Non-smooth multisurface plasticity and viscoplasticity. loading/unloading conditions and numerical algorithms. International Journal for Numerical Methods in Engineering 26,2161-2185.
214. Sussmann T and Bathe KJ 1987 Afinite element formulation for nonlinear incompressible elastic and inelastic analysis. Computers & Structures 29,357-409.
215. Taylor RL, Beresford PJ and Wilson EL 1976 A non-conforming element for stress analysis. International Journal for Numerical Methods in Engineering 10,1211-1219.
216. Tresca H 1868 Mémoire sur l' écoulement des corps solides. Mémoires Savants de l' Académie des Sciences Paris 18,733-799.
217. Verhoosel CV, Remmers JJC and Gutiérrez MA 2009 A dissipation-based arc-length method for robust simulation of brittle and ductile failure. International Journal for Numerical Methods in Engineering 77,1290-1321.
218. Vermeer PA and de Borst R 1984 Non-associated plasticity for soils, concrete and rock. Heron 29(1), 1-64.
219. von Mises R 1913 Mechanik der festen Körper im plastisch deformablen Zustand. Göttinger Nachrichten, mathematisch-physische Klasse 1,582-592.
220. Wilkins ML 1964 Calculation of elastic-plastic flow, in Methods in Computational Physics (eds Alder B, Fernbach S and Rotenberg M), vol. 3, pp. 211-263. Academic Press.
221. Wood DM 1990 Soil Behaviour and Critical State Soil Mechanics. Cambridge University Press.
222. Ziegler H 1959 A modification of Prager's hardening rule. Quarterly of Applied Mathematics 17,55-65.
223. Aifantis EC 1984 On the microstructural origin of certain inelastic models. ASME Journal of Engineering Materials and Technology 106,326-330.
224. Bažant ZP and Wu ST 1974 Rate-type creep law for aging concrete based on Maxwell chain. RILEM Materials and Structures 7,45-60.
225. de Borst R and Heeres OM 2002 A unified approach to the implicit integration of standard, non-standard and viscous plasticity models. International Journal for Numerical and Analytical Methods in Geomechanics 26,1059-1070.
226. Duvaut G and Lions JL 1972 Les Inequations en Mécanique et en Physique.
227. Dunod. Heeres OM, Suiker ASJ and de Borst R 2002 Acomparison between the Perzyna viscoplastic model and the consistency viscoplastic model. European Journal of Mechanics: A/Solids 21,1-12.
228. Hult J 1966 Creep in Engineering Structures. Blaisdell.
229. Ju JW 1990 Consistent tangent moduli for a class of viscoplasticity. ASCE Journal of Engineering Mechanics 116,1764-1779.
230. Perzyna P 1966 Fundamental problems in viscoplasticity, in Advances in Applied Mechanics (ed. Chernyi GG), vol. 9, pp. 243-377. Academic Press.
231. Ristinmaa M and Ottosen NS 2000 Consequences of dynamic yield surfaces in viscoplasticity. International Journal of Solids and Structures 37,4601-4622.
232. Runesson K, Ristinmaa M and Mähler L 1999 A comparison of viscoplasticity formats and algorithms. Mechanics of Cohesive-frictional Materials 4,75-98.
233. Simo JC, Kennedy JG and Govindjee S 1988 Non-smooth multisurface plasticity and viscoplasticity. loading/unloading conditions and numerical algorithms. International Journal for Numerical Methods in Engineering 26,2161-2185.
234. Taylor RL, Pister KS and Goudreau GL 1970 Thermomechanical analysis of viscoelastic solids. International Journal for Numerical Methods in Engineering 2,45-59.
235. Wang WM, Sluys LJ and de Borst R 1996 Interaction between material length scale and imperfection size for localisation in viscoplastic media. European Journal of Mechanics: A/Solids 15,447-464.
236. Wang WM, Sluys LJ and de Borst R 1997 Viscoplasticity for instabilities due to strain softening and strain-rate softening. International Journal for Numerical Methods in Engineering 40,3839-3864.
237. Zienkiewicz OC and Taylor RL 1991 The Finite Element Method, Vol. 2, Solid and Fluid Mechanics, Dynamics and Non-linearity. McGraw-Hill.
238. Zienkiewicz OC, Watson M and King IP 1968 A numerical method for viscoelastic stress analysis. International Journal of Engineering Science 10,807-827.
239. Argyris JH 1982 An excursion into large rotations. Computer Methods in Applied Mechanics and Engineering 32,85-155.
240. Argyris JH, Balmer H, Doltsinis JS, Dunne PC, Haase M, Kleiber M, Malejannakis GA, Mlejnek HP, Muller M and Scharpf DW 1979 Finite element method - the natural approach. Computer Methods in Applied Mechanics and Engineering 17/18,1-106.
241. Atluri SN and Cazzani A 1995 Rotations in computational solid mechanics. Archives of Computational Methods in Engineering 2,49-138.
242. Bathe KJ 1982 Finite Element Procedures in Engineering Analysis. Prentice Hall, Inc.
243. Bathe KJ and Bolourchi S 1975 Large displacement analysis of three-dimensional beam structures. International Journal for Numerical Methods in Engineering 14,961-986.
244. Belytschko T and Glaum LW 1979 Application of higher-order corotational stretch theories to nonlinear finite element analysis. Computers & Structures 10,175-182.
245. Belytschko T and Hsieh BJ 1973 Non-linear transient finite element analysis with convected co-ordinates. International Journal for Numerical Methods in Engineering 7,255-271.
246. Bischoff M,WallWA, Bletzinger KU and Ramm E 2004 Models and finite elements for thin-walled structures, in The Encyclopedia of Computational Mechanics (eds Stein E, de Borst R and Hughes TJR), vol. II, pp. 59-137. John Wiley & Sons, Ltd.
247. Burgoyne CJ and Crisfield MA 1990 Numerical integration strategy for plates and shells. International Journal for Numerical Methods in Engineering 29,105-121.
248. Cowper GR 1966 The shear coefficient in Timoshenko's beam theory. Journal of Applied Mechanics 33,335-340.
249. Crisfield MA 1986 Finite Elements and Solution Procedures for Structural Analysis: Linear Analysis. Pineridge Press.
250. Crisfield MA 1991 The 'eccentricity' issue in the design of beam, plate and shell elements. Communications in Applied Numerical Methods 7,47-56.
251. Dvorkin EN, Onate E and Oliver J 1988 Ona non-linear formulation for curved Timoshenko beam elements considering large displacement/rotation increments. International Journal for Numerical Methods in Engineering 26,1597- 1613.
252. Hartsuijker C and Welleman JW 2007 Engineering Mechanics: Stresses, Strains, Displacements. Springer.
253. Oran C 1973 Tangent stiffness in space frames. ASCE Journal of the Structural Division 99,973-985.
254. Oran C and Kassimali A 1976 Large deformation of framed structures under static and dynamic loads. Computers & Structures 6,539-547.
255. Simo JC 1985 A finite strain beam formulation. The three-dimensional dynamic problem. Part I. Computer Methods in Applied Mechanics and Engineering 49,55-70.
256. Simo JC and Quoc LV 1986 A three-dimensional finite strain rod model. Part II: computational aspects. Computer Methods in Applied Mechanics and Engineering 58,79-116.
257. Stolarski H and Belytschko T 1982 Membrane locking and reduced integration for curved elements. Journal of Applied Mechanics 49,172-176.
258. Surana KS 1983a Geometrically non-linear formulation for the curved shell elements. International Journal for Numerical Methods in Engineering 19,353-386.
259. Surana KS 1983b Geometrically non-linear formulation for two-dimensional curved beam elements. Computers & Structures 17,105-114.
260. Timoshenko SP 1921 On the correction for shear of the differential equation for transverse vibration of prismatic bars. Philosophical Magazine 41,744-746.
261. Washizu K 1975 Variational Methods in Elasticity and Plasticity, 2nd edn. Pergamon Press.
262. Wempner G 1969 Finite elements, finite rotations and small strains of flexible shells. International Journal of Solids and Structures 5,117-153.
263. Wood RD and Zienkiewicz OC 1977 Geometrically nonlinear finite element analysis of beams, frames, arches and axisymmetric shells. Computers & Structures 7,725-735.
264. Ahmad S, Irons BM and Zienkiewicz OC 1970 Analysis of thick and thin shell structures by curved finite elements. International Journal for Numerical Methods in Engineering 2,419-451.
265. Bathe KJ 1982 Finite Element Procedures in Engineering Analysis. Prentice Hall, Inc.
266. Bathe KJ and Bolourchi S 1980 A geometric and material nonlinear plate and shell element. Computers & Structures 11,23-48.
267. Bischoff M,WallWA, Bletzinger KU and Ramm E 2004 Models and finite elements for thin-walled structures, in The Encyclopedia of Computational Mechanics (eds Stein E, de Borst R and Hughes TJR), vol. II, pp. 59-137. John Wiley & Sons, Ltd.
268. Braun M, Bischoff M and Ramm E 1994 Nonlinear shell formulations for complete three-dimensional constitutive laws including composites and laminates. Computational Mechanics 15,1-18.
269. Büchter N and Ramm E 1992 Shell theory versus degeneration. A comparison in large rotation shell theory. International Journal for Numerical Methods in Engineering 34,39-59.
270. Büchter N, Ramm E and Roehl D 1994 Three-dimensional extension of nonlinear shell formulation based on the enhanced assumed strain concept. International Journal for Numerical Methods in Engineering 37,2551-2568.
271. Burgoyne CJ and Brennan MG 1993 Exact Ilyushin yield surface. International Journal of Solids and Structures 30,1113-1131.
272. Crisfield MA 1983 A four-noded thin-plate bending element using shear constraints - a modified version of Lyons' element. Computer Methods in Applied Mechanics and Engineering 38,93-120.
273. Crisfield MA 1984 A quadratic mindlin element using shear constraints. Computers & Structures 18,833-852.
274. Crisfield MA 1986 Finite Elements and Solution Procedures for Structural Analysis: Linear Analysis. Pineridge Press.
275. de Borst R 1991 The zero-normal-stress condition in plane-stress and shell elasto-plasticity. Communications in Applied Numerical Methods 7,29-33.
276. de Borst R and Feenstra PH 1990 Studies in anisotropic plasticity with reference. International Journal for Numerical Methods in Engineering 29,315-336.
277. Dvorkin EN and Bathe KJ 1984 Acontinuum mechanics based four-node shell element for general non-linear analysis. Engineering Computations 1,77-88.
278. Hauptmann R and Schweizerhof K 1998 A systematic development of 'solid-shell' element formulations for linear and non-linear analyses employing only displacement degrees of freedom. International Journal for Numerical Methods in Engineering 42,49-69.
279. Hughes TJR 1987 The Finite Element Methods: Linear Static and Dynamic Finite Element Analysis. Prentice Hall, Inc.
280. Hughes TJR and Liu WK 1981 Nonlinear finite element analysis of shell. Part 1: Three-dimensional shells. Computer Methods in Applied Mechanics and Engineering 26,331-362.
281. Ilyushin AA 1956 Plasticité (Deformation elasto-plastiques). Editions Eyrolles.
282. Kühhorn A and Schoop H 1992 A nonlinear theory for sandwich shells including the wrinkling phenomenon. Archive of Applied Mechanics 62,413-427.
283. Milford RV and Schnobrich WC 1986 Degenerated isoparametric elements using explicit integration. International Journal for Numerical Methods in Engineering 23,133-154.
284. Parisch H 1981 Large displacements of shells including material nonlinearities. Computer Methods in Applied Mechanics and Engineering 27,183-214.
285. Parisch H 1995 A continuum-based shell theory for non-linear applications. International Journal for Numerical Methods in Engineering 38,1855-1883.
286. Remmers JJC, Wells GN and de Borst R 2003 A discontinuous solid-like shell element for arbitrary delaminations. International Journal for Numerical Methods in Engineering 58,2013-2040.
287. Sansour C 1995 A theory and finite element formulation of shells at finite deformations involving thickness change. Archive of Applied Mechanics 65,194-216.
288. Simo JC and Fox DD 1989 On a stress resultant geometrically exact shell model. Part I: Formulation and optimal representation. Computer Methods in Applied Mechanics and Engineering 72,267-304.
289. Simo JC and Kennedy JG 1992 On a stress resultant geometrically exact shell model. Part V: Nonlinear plasticity: formulation and integration algorithms. Computer Methods in Applied Mechanics and Engineering 96,133-171.
290. Simo JC, Fox DD and Rifai MS 1989 On a stress resultant geometrically exact shell model. Part II: The linear theory: computational aspects. Computer Methods in Applied Mechanics and Engineering 73,53-92.
291. Simo JC, Fox DD and Rifai MS 1990 On a stress resultant geometrically exact shell model. Part III: Computational aspects of the nonlinear theory. Computer Methods in Applied Mechanics and Engineering 79,21-70.
292. Skallerud B and Haugen B 1999 Collapse of thin shell structures - stress resultant plasticity modelling within a co-rotated ANDES finite element formulation. International Journal for Numerical Methods in Engineering 46,1961-1986.
293. Stander N, Matzenmiller A and Ramm E 1989 An assessment of assumed strain methods in finite element rotation shell analysis. Engineering Computations 6,58-66.
294. Surana KS 1983 Geometrically non-linear formulation for the curved shell elements. International Journal for Numerical Methods in Engineering 19,353-386.
295. Zienkiewicz OC, Taylor RL and Too JM 1971 Reduced integration techniques in general analysis of plates and shells. International Journal for Numerical Methods in Engineering 3,275-290.
296. Bathe KJ 1982 Finite Element Procedures in Engineering Analysis. Prentice Hall, Inc.
297. Bonet J and Wood RD 1997 Nonlinear Continuum Mechanics for Finite Element Analysis. Cambridge University Press.
298. Brink U and Stein E 1996 On some mixed finite element methods for incompressible and nearly incompressible finite elasticity. Computational Mechanics 19,105-119.
299. Cescotto S and Fonder G 1979 A finite element approach for large strains of nearly incompressible rubber-like materials. International Journal of Solids and Structures 15,589-605.
300. Crisfield MA and Moita GF 1996 A co-rotational formulation for 2-D continua including incompatible modes. International Journal for Numerical Methods in Engineering 39,2619-2633.
301. de Borst R, van den Bogert PAJ and Zeilmaker J 1988 Modelling and anlaysis of rubberlike materials. Heron 33(1), 1-57.
302. de Souza Neto EA, Perić D and Owen DRJ 2008 Computational Methods for Plasticity: Theory and Applications. John Wiley & Sons, Ltd.
303. de Souza Neto EA, Perić D, Dutko M and Owen DRJ 1996 Design of simple low order finite elements for large strain analysis of nearly incompressible solids. International Journal of Solids and Structures 33,3277-3296.
304. de Souza Neto EA, Perić D, Huang GC and Owen DRJ 1995 Remarks on the stability of enhanced strain elements in finite elasticity and elastoplasticity. Communications in Numerical Methods in Engineering 11,951-961.
305. de Souza Neto EA, Pires FMA and Owen DRJ 2005 F-bar-based linear triangles and tetrahedra for finite strain analysis of nearly incompressible solid. Part 1: Formulation and benchmarking. International Journal for Numerical Methods in Engineering 62,353-383.
306. Dienes JK 1979 On the analysis of rotation and stress rate in deforming bodies. Acta Mechanica 32,217-232.
307. Dienes JK 1986 A discussion of material rotation and stress rate. Acta Mechanica 65,1-11.
308. Doll S, Schweizerhof K, Hauptmann R and Freischläger C 2000 On volumetric locking of low-order solid and solid-shell elements for finite elastoviscoplastic deformations and selective reduced integration. Engineering Computations 17,874-902.
309. Glaser S and Armero F 1997 On the formulation of enhanced strain finite elements in finite deformations. Engineering Computations 14,759-791.
310. Glowinski R and Tallec PL 1985 Finite elements in nonlinear incompressible elasticity, in Finite Elements: Special Problems in Solid Mechanics (eds Oden JT and Carey GF), pp. 67-93. Prentice Hall, Inc.
311. Hencky H 1933 The elastic behaviour of vulcanized rubber. Journal of Applied Mechanics 1,45-53.
312. Hughes TJR 1980 Generalization of selective integration procedures to anisotropic and nonlinear media. International Journal for Numerical Methods in Engineering 15,1413-1418.
313. Hughes TJR 1987 The Finite Element Methods: Linear Static and Dynamic Finite Element Analysis. Prentice Hall, Inc.
314. Jankovich E, Leblanc F, Durand M and Bercovier M 1981 A finite element method for the analysis of rubber parts: experimental and numerical assessment. Computers and Structures 14,385-391.
315. Jaumann G 1911 Geschlossenes System physikalischer und chemischer Differentialgesetze. Sitzbereich Akademischen Wissenschaften Wien (IIa) 120,385-530.
316. Johnson CG and Bamman DJ 1984 A discussion of stress rates in finite deformation problems. International Journal of Solids and Structures 20,725-737.
317. Korelc J and Wriggers P 1996 Consistent gradient formulation for a stable enhanced strain method for large deformations. Engineering Computations 13,103-123.
318. Moita GF and Crisfield MA 1996 A finite element formulation for 3-D continua using the co-rotational technique. International Journal for Numerical Methods in Engineering 39,3775-3792.
319. Mooney M 1940 A theory of large elastic deformations. Journal of Applied Mechanics 11,582-592.
320. Moran B, Ortiz M and Shih CF 1990 Formulation of implicit finite element methods for multiplicative finite deformation plasticity. International Journal for Numerical Methods in Engineering 29,483-514.
321. Nagtegaal JC and de Jong JE 1982 Some aspects of nonisotropic work-hardening in finite strain plasticity, in Plasticity of Metals at Finite Deformation (eds Lee EH and Mallet RL), p. 65. Stanford University.
322. Nagtegaal JC, Parks DM and Rice JR 1974 On numerically accurate finite element solutions in the fully plastic range. Computer Methods in Applied Mechanics and Engineering 4,113-135.
323. Ogden RW 1972 Large deformation isotropic elasticity: on the correlation of theory and experiment for incompressible rubberlike solids. Proceedings of the Royal Society of London A326,565-584.
324. Ogden RW 1984 Non-Linear Elastic Deformations. Ellis Horwood.
325. Peng STJ 1979 The elastic potential function of slightly compressible rubberlike materials. Journal of Polymer Science 17,345-350.
326. Peng STJ and Landel RF 1975 Stored energy function and compressibility of compressible rubberlike materials under large strain. Journal of Applied Physics 46,2599-2604.
327. Penn RW 1970 Volume changes accompanying the extension of rubber. Transactions of the Society of Rheology 14,509-517.
328. Reese S and Wriggers P 2000 A stabilization technique to avoid hourglassing in finite elasticity. International Journal for Numerical Methods in Engineering 48,79-109.
329. Rivlin RS 1948 Large elastic deformations of isotropic materials IV. Further developments of the general theory. Philosophical Transactions of the Royal Society A241,379-397.
330. Scharnhorst T and Pian THH 1978 Finite element analysis of rubber-like materials by a mixed model. International Journal for Numerical Methods in Engineering 12,665-676.
331. Simo JC and Armero F 1992 Geometrically non-linear enhanced strain mixed methods and the method of incompatible modes. International Journal for Numerical Methods in Engineering 33,1413-1449.
332. Simo JC and Pister KS 1984 Remarks on rate constitutive equations for finite deformation problems: computational implications. Computer Methods in Applied Mechanics and Engineering 46,201-215.
333. Simo JC and Rifai MS 1990 A class of mixed assumed strain methods and the method of incompatible modes. International Journal for Numerical Methods in Engineering 29,1595-1638.
334. Simo JC and Taylor RL 1982 Penalty function formulations for incompressible nonlinear elastostatics. Computer Methods in Applied Mechanics and Engineering 35,107-118.
335. Simo JC, Taylor RL and Pister KS 1985 Variational and projection methods for the volume constraint in finite deformation elasto-plasticity. Computer Methods in Applied Mechanics and Engineering 51,177-208.
336. Sussmann T and Bathe KJ 1987 Afinite element formulation for nonlinear incompressible elastic and inelastic analysis. Computers & Structures 29,357-409.
337. Taylor RL, Beresford PJ and Wilson EL 1976 A non-conforming element for stress analysis. International Journal for Numerical Methods in Engineering 10,1211-1219.
338. Valanis KC and Landel RF 1967 The strain-energy function of a hyperelastic mateiral in terms of extension ratios. Journal of Applied Physics 38,2997-3002.
339. van den Bogert PAJ, de Borst R, Luiten GT and Zeilmaker J 1991 Robust finite elements for 3D-analysis of rubber-like materials. Engineering Computations 8,3-17.
340. Varga OH 1966 Stress-Strain Behaviour of Elastic Materials. John Wiley & Sons, Ltd.
341. Wall WA, Bischoff M and Ramm E 2000 A deformation dependent stabilization technique, exemplified by EAS elements at large strains. Computer Methods in Applied Mechanics and Engineering 188,859-871.
342. Wriggers P and Reese S 1996 A note on enhanced strain methods for large deformations. Computer Methods in Applied Mechanics and Engineering 135,201-209.
343. Armero F 2004 Elastoplastic and viscoplastic deformations in solids and structures, in The Encyclopedia of Computational Mechanics (eds Stein E, de Borst R and Hughes TJR), vol. II, pp. 227-266. John Wiley & Sons, Ltd.
344. Asaro RJ 1983 Crystal plasticity. Journal of Applied Mechanics 50,921-934.
345. Atluri SN 1983 Alternate stress and conjugate strain measures and mixed variational formulations involving rigid rotations, for computational analysis of finitely deformed solids, with applications to planes and shells - I, Theory. Computers & Structures 18,93-116.
346. Atluri SN 1984 On constitutive relations at finite strain. Computer Methods in Applied Mechanics and Engineering 43,137-171.
347. Cuitino AM and Ortiz M 1992 Amaterial-independent method for extending stress update algorithms from small-strain plasticity to finite plasticity with multiplicative kinematics. Engineering Computations 9,437-451.
348. Dafalias YF 1984 The plastic spin concept and a simple illustration of its role in finite plastic transformations. Mechanics of Materials 3,223-233.
349. Dafalias YF 1985 The plastic spin. Journal of Applied Mechanics 52,865-871.
350. Dafalias YF 1998 The plastic spin: necessity or redundancy? International Journal of Plasticity 14,909-931.
351. de Souza Neto EA, Perić D and Owen DRJ 2008 Computational Methods for Plasticity: Theory and Applications. John Wiley & Sons, Ltd.
352. Eterovic AL and Bathe KJ 1990 Ahyperelastic based large strain elasto-plastic constitutive formulation with combined isotropic-kinematic hardening using logarithmic stress and strain measures. International Journal for Numerical Methods in Engineering 30,1099-1114.
353. Flanagan DP and Taylor LM 1987 Anaccurate numerical algorithm for stress integration with finite rotations. Computer Methods in Applied Mechanics and Engineering 62,305-320.
354. Healey BE and Dodds RH 1992 A large-strain plasticity model for implicit finite element analyses. Computational Mechanics 9,95-112.
355. Hibbit HD, Marcal PV and Rice JR 1970 A finite element formulation for problems for large strain and large displacement. International Journal of Solids and Structures 6,1069-1086.
356. Hughes TJR and Winget J 1980 Finite rotation effects in numerical integration of rate constitutive equations arising in large-deformation analysis. International Journal for Numerical Methods in Engineering 15,1862-1867.
357. Key SW and Krieg RD 1982 On the numerical implementation of inelastic time dependent and time independent, finite strain constitutive equations in structural mechanics. Computer Methods in Applied Mechanics and Engineering 33,439-452.
358. Kratochvil J 1973 On a fintie strain theory of elastic-inelastic materials. Acta Mechanica 16,127-142.
359. Lee EH 1969 Elastic-plastic deformation at finite strain. Journal of Applied Mechanics 36,1-6.
360. Lubliner J 1990 Plasticity Theory. Macmillan.
361. Mandel J 1974 Thermodynamics and plasticity, in Foundations of Continuum Thermodynamics (ed. Domingues JJD), pp. 283-304. Macmillan.
362. Marsden JE and Hughes TJR 1983 Mathematical Foundations of Elasticity. Prentice Hall, Inc.
363. McMeeking RM and Rice JR 1975 Finite-element formulations for problems of large elastic-plastic deformation. International Journal of Solids and Structures 11,601-616.
364. Meschke G and Liu WN 1999 A reformulation of the exponential algorithm for finite strain plasticity in terms of Cauchy stresses. Computer Methods in Applied Mechanics and Engineering 173,167-187.
365. Miehe C 1996 Exponential map algorithm for stress updates in anisotropic multiplicative elastoplasticity for single crystals. International Journal for Numerical Methods in Engineering 39,3367-3390.
366. Miehe C 1998 A formulation of finite elastoplasticity based on dual co- and contra-variant eigenvector triads normalized with respect to a plastic metric. Computer Methods in Applied Mechanics and Engineering 159,223-260.
367. Miehe C and Schotte J 2004 Crystal plasticity and the evolution of polycrystalline microstructure, in The Encyclopedia of Computational Mechanics (eds Stein E, de Borst R and Hughes TJR), vol. II, pp. 267-289. John Wiley & Sons, Ltd.
368. Moran B, Ortiz M and Shih CF 1990 Formulation of implicit finite element methods for multiplicative finite deformation plasticity. International Journal for Numerical Methods in Engineering 29,483-514.
369. Moss WC 1984 On instabilities in large deformation simple shear loading. Computer Methods in Applied Mechanics and Engineering 46,329-338.
370. Nagtegaal JC 1982 On the implementation of inelastic constitutive equations with special reference to large deformation problems. Computer Methods in Applied Mechanics and Engineering 33,469-484.
371. Nagtegaal JC and de Jong JE 1981 Some computational aspects of elastic-plastic large strain analysis. International Journal for Numerical Methods in Engineering 17,15-41.
372. Needleman A 1985 On finite element formulations for large elastic-plastic deformations. Computers & Structures 20,247-257.
373. Nemat-Nasser S 1982 On finite deformation elasto-plasticity. International Journal of Solids and Structures 18,857-872.
374. Nemat-Nasser S 1983 On finite plastic flow of crystalline solids and geomaterials. Journal of Applied Mechanics 35,151-183.
375. Peirce D, Asaro RJ and Needleman A 1982 An analysis of nonuniform and localized deformation in crystalline solids. Acta Metallurgica 30,1087-1119.
376. Perić D, Owen DRJ and Honnor ME 1992 A model for finite strain elasto-plasticity based on logarithmic strains: computational issues. Computer Methods in Applied Mechanics and Engineering 94,35-61.
377. Pinsky PM, Ortiz M and Pister KS 1983 Numerical integration of rate constitutive equations in finite deformation analysis. Computer Methods in Applied Mechanics and Engineering 40,137-158.
378. Rice JR 1971 Inelastic constitutive relations for solids: an internal variable theory and its application to metal plasticity. Journal of the Mechanics and Physics of Solids 19,433-455.
379. Rice JR 1975 Continuum mechanics and thermodynamics of plasticity in relation to microscale deformation mechanisms, in Constitutive Equations in Plasticity (ed. Argon AS), pp. 23-75. MIT Press.
380. Rosati L and Valoroso N 2004 A return map algorithm for general isotropic elasto/visco-plastic materials in principal space. International Journal for Numerical Methods in Engineering 60,461-498.
381. Rouainia M and Wood DM 2000 An implicit constitutive algorithm for finite strain cam-clay elasto-plastic model. Mechanics of Cohesive-frictional Material 5,469-489.
382. Simo JC 1985 A finite strain beam formulation. The three-dimensional dynamic problem. Part I. Computer Methods in Applied Mechanics and Engineering 49,55-70.
383. Simo JC 1988a A framework for finite strain elastoplasticity based on maximum plastic dissipation and the multiplicative decomposition. Part I. Continuum formulation. Computer Methods in Applied Mechanics and Engineering 66,199-219.
384. Simo JC 1988b A framework for finite strain elastoplasticity based on maximum plastic dissipation and the multiplicative decomposition. Part II. Computational aspects. Computer Methods in Applied Mechanics and Engineering 68,1-31.
385. Simo JC 1992 Algorithms for static and dynamic multiplicative plasticity that preserve the classical return mapping schemes of the infinitesimal theory. Computer Methods in Applied Mechanics and Engineering 99,61-112.
386. Simo JC 1998 Numerical analysis of classical plasticity, in Handbook for Numerical Analysis (eds Ciarlet PG and Lions JJ), vol. IV, pp. 183-499. Elsevier.
387. Simo JC and Hughes TJR 1998 Computational Inelasticity: Theory and Applications. Springer.
388. Simo JC and Ortiz M 1985 A unified approach to finite deformation elastoplastic analysis based on the use of hyperelastic constitutive equations. Computer Methods in Applied Mechanics and Engineering 49,221-245.
389. Weber G and Anand L 1990 Finite deformation constitutive equations and a time integration procedure for isotropic hyperelastic viscoplastic solids. Computer Methods in Applied Mechanics and Engineering 79,173-202.
390. Allix O and Corigliano A 1999 Geometrical and interfacial non-lineararities in the analysis of delamination in composites. International Journal of Solids and Structures 36,2189-2216.
391. Allix O and Ladeveze P 1992 Interlaminar interface modelling for the prediction of delamination. Composite Structures 22,235-242.
392. Barsoum RS 1976 On the use of isoparametric finite elements in linear fracture mechanics. International Journal for Numerical Methods in Engineering 10,225-237.
393. Baumann CE and Oden JT 1999 A discontinuous hp finite element method for the euler and Navier-Stokes problems. International Journal for Numerical Methods in Fluids 31,79-95.
394. Camacho GT and Ortiz M 1996 Computational modelling of impact damage in brittle materials. International Journal of Solids and Structures 33,2899-2938.
395. Cockburn B 2004 Discontinuous Galerkin methods for computational fluid dynamics, in The Encyclopedia of Computational Mechanics (eds Stein E, de Borst R and Hughes TJR), vol. III, pp. 417-471. John Wiley & Sons, Ltd.
396. Feenstra PH, de Borst R and Rots JG 1991 Numerical study on crack dilatancy; part 1: Models and stability analysis; part 2: Applications. Journal of Engineering Mechanics 117,733-769.
397. Goodman RE, Taylor RL and Brekke TL 1968 A model for the mechanics of jointed rock. ASCE Journal of the Soil Mechanics and Foundation Engineering Division 94,637-659.
398. Henshell RD and Shaw KG 1976 Crack tip finite elements are unnecessary. International Journal for Numerical Methods in Engineering 9,495-507.
399. Ingraffea AR and Saouma V 1985 Numerical modelling of discrete crack propagation in reinforced and plain concrete, in Fracture Mechanics of Concrete (eds Sih GC and DiTommaso), Martinus Nijhoff Publishers Dordrecht pp. 171- 225. Martinus Nijhoff.
400. Mergheim J, Kuhl E and Steinmann P 2004 A hybrid discontinuous Galerkin/interface method for the computational modelling of failure. Communications in Numerical Methods in Engineering 20,511-519.
401. Ngo D and Scordelis AC 1967 Finite element analysis of reinforced concrete beams. Journal of the American Concrete Institute 64,152-163.
402. Nitsche JA 1970 Über ein variationsprinzip zur lösung dirichlet-problemen bei verwendung von teilraümen, die keinen randbedingungen unterworfen sind. Abhandlungen des Mathematischen Seminars Universität Hamburg 36,9-15.
403. Qiu X, Plesha ME and Meyer DW 1991 Stiffness matrix integration rules for contact-friction finite elements. Computer Methods in Applied Mechanics and Engineering 93,385-399.
404. Rots JG 1991 Smeared and discrete representations of localized fracture.. International Journal of Fracture 51,45-59.
405. Schellekens JCJ and de Borst R 1993a A nonlinear finite-element approach for the analysis of mode 1 free edge delamination in composites. International Journal of Solids and Structures 30,1239-1253.
406. Schellekens JCJ and de Borst R 1993b On the numerical integration of interface elements. International Journal for Numerical Methods in Engineering 36,43-66.
407. Schellekens JCJ and de Borst R 1994 Free edge delamination in carbon-epoxy laminates: a novel numerical/experimental approach. Composite Structures 28,357-373.
408. Tijssens MGA, Sluys LJ and van der Giessen E 2000 Numerical simulation of quasi-brittle fracture using damaging cohesive surfaces. European Journal of Mechanics: A/Solids 19,761-779.
409. van den Bosch MJ, Schreurs PJG and Geers MGD 2007 A cohesive zone model with a large displacement formulation accounting for interfacial fibrilation. European Journal of Mechanics: A/Solids 26,1-19.
410. van den Bosch MJ, Schreurs PJG, Geers MGD and van Maris MPHFL 2008 Interfacial characterization of pre-strained polymer coated steel by a numerical-experimental approach. Mechanics of Materials 40,302-317.
411. Verhoosel CV, Remmers JJC and Gutiérrez MA 2009 A dissipation-based arc-length method for robust simulation of brittle and ductile failure. International Journal for Numerical Methods in Engineering 77,1290-1321.
412. Wells GN, Garikipati K and Molari L 2004 A discontinuous Galerkin formulation for a strain gradient-dependent damage model. Computer Methods in Applied Mechanics and Engineering 193,3633-3645.
413. Wriggers P 2006 Computational Contact Mechanics, 2nd edn. Springer.
414. Xu XP and Needleman A 1994 Numerical simulations of fast crack growth in brittle solids. Journal of the Mechanics and Physics of Solids 42,1397-1434.
415. Xu XP and Needleman A 1996 Numerical simulations of dynamic crack growth along an interface. International Journal of Fracture 74,289-324.
416. Allix O and Corigliano A 1999 Geometrical and interfacial non-lineararities in the analysis of delamination in composites. International Journal of Solids and Structures 36,2189-2216.
417. Askes H, de Borst R and Heeres OM 1999 Conditions for locking-free elasto-plastic analyses in the element-free Galerkin method. Computer Methods in Applied Mechanics and Engineering 173,99-109.
418. Askes H, Pamin J and de Borst R 2000 Dispersion analysis and element-free Galerkin solutions of second- and fourth-order gradient-enhanced damage models. International Journal for Numerical Methods in Engineering 49,811-832.
419. Askes H, Wells GN and de Borst R 2003 Novel discretization concepts, in Comprehensive Structural Integrity (eds Milne I, Ritchi RO and Karihaloo B), vol. III, pp. 377-425. Elsevier.
420. Atluri SN and Zhu T 1998 A new Meshless Local Petrov-Galerkin (MLPG) approach in computational mechanics. Computational Mechanics 22,117-127.
421. Atluri SN and Zhu T 1999 A critical assessment of the truly new Meshless Local Petrov-Galerkin (MLPG), and Local Boundary Integral Equation methods. Computational Mechanics 24,348-372.
422. Atluri SN and Zhu T 2000 New concepts in meshless methods. International Journal for Numerical Methods in Engineering 47,537-556.
423. Babuška I and Melenk JM 1997 The partition of unity method. International Journal for Numerical Methods in Engineering 40,727-758.
424. Barsoum RS 1976 On the use of isoparametric finite elements in linear fracture mechanics. International Journal for Numerical Methods in Engineering 10,225-237.
425. Beissel S and Belytschko T 1996 Nodal integration in the element-free Galerkin method. Computer Methods in Applied Mechanics and Engineering 139,49-74.
426. Belytschko T and Black T 1999 Elastic crack growth in finite elements with minimal remeshing. International Journal for Numerical Methods in Engineering 45,601-620.
427. Belytschko T, Krongauz Y, Organ D, Fleming M and Krysl P 1996 Meshless methods: an overview and recent developments. Computer Methods in Applied Mechanics and Engineering 193,3-47.
428. Belytschko T, Lu YY and Gu L 1994 Element-free Galerkin methods. International Journal for Numerical Methods in Engineering 37,229-256.
429. Belytschko T, Möes N, Usui S and Parimi C 2001 Arbitrary discontinuities in finite elements. International Journal for Numerical Methods in Engineering 50,993-1013.
430. Bhattacharya K 2003 Microstructure of Martensite: Why it Forms and How it Gives Rise to the Shape-Memory Effect. Oxford University Press.
431. Chen JS and Wang HP 2000 New boundary condition treatments in meshfree computation of contact problems. Computer Methods in Applied Mechanics and Engineering 187,441-468.
432. Chen JS,Wu CT, Yoon S and You Y 2001 A stabilized conforming nodal integration for Galerkin mesh-free methods. International Journal for Numerical Methods in Engineering 50,435-466.
433. Chinesta F, Cescotto S, Cueto E and Lorong P 2010 Natural Element Methods for the Simulation of Structures and Processes. ISTE and John Wiley & Sons, Ltd.
434. De S and Bathe KJ 2000 The method of finite spheres. Computational Mechanics 25,329-345.
435. Dolbow J and Belytschko T 1999 Volumetric locking in the element free Galerkin method. International Journal for Numerical Methods in Engineering 46,925-942.
436. Duarte CA and Oden J 1996 H-p clouds - an h-p meshless method. Numerical Methods for Partial Differential Equations 12,673-705.
437. Fleming M, Chu YA, Moran B and Belytschko T 1997 Enriched element-free Galerkin methods for crack tip fields. International Journal for Numerical Methods in Engineering 40,1483-1504.
438. Gavete L, Benito JJ, Falcón S and Ruiz A 2000 Implementation of essential boundary conditions in a meshless method. Communications in Numerical Methods in Engineering 16,409-421.
439. González D, Cueto E and Doblaré M 2004 Volumetric locking in natural neighbour Galerkin methods. International Journal for Numerical Methods in Engineering 61,611-632.
440. Gravouil A, Möes N and Belytschko T 2002 Non-planar 3D crack growth by the extended finite element and level sets - Part I: Mechanical model and Part II: Level set update. International Journal for Numerical Methods in Engineering 53,2549-2586.
441. Hansbo A and Hansbo P 2004 A finite element method for the simulation of strong and weak discontinuities in solid mechanics. Computer Methods in Applied Mechanics and Engineering 193,3523-3540.
442. Henshell RD and Shaw KG 1976 Crack tip finite elements are unnecessary. International Journal for Numerical Methods in Engineering 9,495-507.
443. Hou T, Rosakis P and Lefloch P 1999 A level-set approach to the computation of twinning and phase-transition dynamics. Journal of Computational Physics 150,302-331.
444. Huerta A and Fernández-Méndez S 2001 Locking in the incompressible limit for the element-free Galerkin method. International Journal for Numerical Methods in Engineering 51,1361-1383.
445. Karihaloo BL and Xiao QZ 2010 Asymptotic fields ahead of mixed mode frictional cohesive cracks. Zeitschrift für Angewandte Mathematik und Mechanik 90,121-129.
446. Krysl P and Belytschko T 1996 Analysis of thin shells by the element-free Galerkin method. International Journal of Solids and Structures 33,3057-3080.
447. Krysl P and Belytschko T 1999 The element-free Galerkin method for dynamic propagation of arbitrary 3-D cracks. International Journal for Numerical Methods in Engineering 44,767-800.
448. Krysl P and Belytschko T 2001 ESFLIB: a library to compute the element-free Galerkin shape functions. Computer Methods in Applied Mechanics and Engineering 190,2181-2205.
449. Lancaster P and Salkauskas K 1981 Surfaces generated by moving least squares. Mathematics of Computation 37,141-158.
450. Liu WK,Jun S and Zhang YF 1995 Reproducing kernel particle methods. International Journal for Numerical Methods in Fluids 20,1081-1106.
451. Lu YY, Belytschko T and Gu L 1994 A new implementation of the element free Galerkin method. Computer Methods in Applied Mechanics and Engineering 113,229-256.
452. Melenk JM and Babuška I 1996 The partition of unity finite element method: basic theory and applications. Computer Methods in Applied Mechanics and Engineering 139,289-314.
453. Möes N and Belytschko T 2002 Extended finite element method for cohesive crack growth. Engineering Fracture Mechanics 69,813-833.
454. Möes N, Cloirec M, Cartraud P and Remacle J 2003 A computational approach to handle complex microstructure geometries. Computer Methods in Applied Mechanics and Engineering 192,3163-3177.
455. Möes N, Dolbow J and Belytschko T 1999 A finite element method for crack growth without remeshing. International Journal for Numerical Methods in Engineering 46,131-150.
456. Nayroles B, Touzot G and Villon P 1992 Generalizing the finite element method: diffuse approximations and diffuse elements. Computational Mechanics 10,307-318.
457. Onate E, Idelsohn S, Zienkiewicz OC and Taylor RL 1996 A finite point method in computational mechanics. applications to convective transport and fluid flow. International Journal for Numerical Methods in Engineering 39,3839-3866.
458. Osher S and Paragios N 2003 Geometric Level Set Methods in Imaging, Vision, and Graphics. Springer-Verlag.
459. Pamin J, Askes H and de Borst R 2003 Two gradient plasticity theories discretized with the element-free Galerkin method. Computer Methods in Applied Mechanics and Engineering 192,2377-2407.
460. Remmers JJC, de Borst R and Needleman A 2003a A cohesive segments method for the simulation of crack growth. Computational Mechanics 31,69-77.
461. Remmers JJC, de Borst R and Needleman A 2008 The simulation of dynamic crack propagation using the cohesive segments method. Journal of the Mechanics and Physics of Solids 56,70-92.
462. Remmers JJC, Wells GN and de Borst R 2003b A discontinuous solid-like shell element for arbitrary delaminations. International Journal for Numerical Methods in Engineering 58,2013-2040.
463. Simone A 2004 Partition of unity-based discontinuous elements for interface phenomena: computational issues. Communications in Numerical Methods in Engineering 20,465-478.
464. Sukumar N, Moran B, Semenov AY and Belikov VV 2001 Natural neighbour Galerkin methods. International Journal for Numerical Methods in Engineering 50,1-27.
465. Sulsky D, Chen Z and Schreyer HL 1994 A particle method for history-dependent materials. Computer Methods in Applied Mechanics and Engineering 118,179-196.
466. Valance S, de Borst R, Réthoré J and Coret M 2008 A partition-of-unity based finite element method for level sets. International Journal for Numerical Methods in Engineering 76,1513-1527.
467. Ventura G 2002 An augmented Lagrangian approach to essential boundary conditions in meshless methods. International Journal for Numerical Methods in Engineering 53,825-842.
468. Wagner GJ and Liu WK 2000 Application of essential boundary conditions in mesh-free methods: a corrected collocation method. International Journal for Numerical Methods in Engineering 47,1367-1370.
469. Wells GN and Sluys LJ 2001 A new method for modelling cohesive cracks using finite elements. International Journal for Numerical Methods in Engineering 50,2667-2682.
470. Wells GN, de Borst R and Sluys LJ 2002 A consistent geometrically non-linear approach for delamination. International Journal for Numerical Methods in Engineering 54,1333-1355.
471. Wu CK and Plesha ME 2002 Essential boundary condition enforcement in meshless methods: boundary flux collocation method. International Journal for Numerical Methods in Engineering 53,499-514.
472. Xiao QZ and Karihaloo BL 2006 Improving the accuracy of XFEM crack field using higher order quadrature and statically admissible stress recovery. International Journal for Numerical Methods in Engineering 66,1378-1410.
473. Yvonnet J, Ryckelynck D, Lorong P and Chinesta F 2004 A new extension of the natural element method for nonconvex and discontinuous problems: the constrained natural element method (C-NEM). International Journal for Numerical Methods in Engineering 60,1451-1474.
474. Askes H, Pamin J and de Borst R 2000 Dispersion analysis and element-free Galerkin solutions of second-and fourth-order gradient-enhanced damage models. International Journal for Numerical Methods in Engineering 49,811-832.
475. Bazilevs Y, Calo VM, Cottrell JA, Evans JA, Hughes TJR, Lipton S, Scott MA and Sederberg TW 2010 Isogeometric analysis using T-splines. Computer Methods in Applied Mechanics and Engineering 199,229-263.
476. Benson DJ, Bazilevs Y, Hsu MC and Hughes TJR 2010 Isogeometric shell analysis: the Reissner-Mindlin shell. Computer Methods in Applied Mechanics and Engineering 199,276-289.
477. Betsch P, Gruttmann F and Stein E 1996 A 4-node finite shell element for the implementation of general hyperelastic 3d-elasticity at finite strains. Computer Methods in Applied Mechanics and Engineering 130,57-79.
478. Borden MJ, Scott MA, Evans JA and Hughes TJR 2011 Isogeometric finite element data structures based on Bézier extraction of NURBS. International Journal for Numerical Methods in Engineering 87,15-47.
479. Chróscielewski J, Makowski J and Stumpf H 1992 Genuinely resultant shell finite elements accounting for geometric and material non-linearity. International Journal for Numerical Methods in Engineering 35,63-94.
480. Cottrell JA, Hughes TJR and Bazilevs Y 2009 Isogeometric Analysis: Toward Integration of CAD and FEA. John Wiley & Sons, Ltd.
481. Cox MG 1972 The numerical evaluation of B-splines. IMA Journal of Applied Mathematics 10,134-149.
482. de Boor C 1972 On calculating with B-splines. Journal of Approximation Theory 6,50-62.
483. Farin G 1993 Curves and Surfaces for CAGD. Academic Press, Inc.
484. Geers MGD, de Borst R, Brekelmans WAM and Peerlings RHJ 1998 Strain-based transient-gradient damage model for failure analyses. Computer Methods in Applied Mechanics and Engineering 160,133-153.
485. Hughes T, Cottrell J and Bazilevs Y 2005 Isogeometric analysis: CAD, finite elements, NURBS, exact geometry and mesh refinement. Computer Methods in Applied Mechanics and Engineering 194,4135-4195.
486. Hughes TJR, Reali A and Sangalli G 2010 Efficient quadrature for NURBS-based isogeometric analysis. Computer Methods in Applied Mechanics and Engineering 199,301-313.
487. Kasik DJ, Buxton W and Ferguson DR 2005 Ten CAD challenges. Computer Graphics and Applications, IEEE 25,81-92.
488. Kiendl J, Bletzinger KU, Linhard J and Wüchner R 2009 Isogeometric shell analysis with Kirchhoff-Love elements. Computer Methods in Applied Mechanics and Engineering 198,3902-3914.
489. MacNeal R and Harder R 1985 A proposed standard set of problems to test finite element accuracy. Finite Elements in Analysis and Design 1,3-20.
490. Peerlings RHJ, de Borst R, Brekelmans WAM and de Vree HPJ 1996 Gradient-enhanced damage for quasi-brittle materials. International Journal for Numerical Methods in Engineering 39,3391-3403.
491. Piegl L and Tiller W 1997 The NURBS Book, 2nd edn. Springer-Verlag.
492. Rogers DF 2001 An Introduction to NURBS. Academic Press.
493. ScottMA,Borden MJ,VerhooselCV, Sederberg TW and Hughes TJR 2011a Isogeometric finite element data structures based on Bézier extraction of T-splines. International Journal for Numerical Methods in Engineering 88,126-156.
494. Scott MA, Li X, Sederberg TW and Hughes TJR 2011b Local refinement of analysis-suitable T-splines. ICES report 11-06, University of Texas at Austin.
495. Sederberg TW, Zheng J, Bakenov A and Nasri A 2003 T-splines and T-NURCCs. ACM Transactions on Graphics 22,477-484.
496. Simone A, Askes H, Peerlings RHJ and Sluys LJ 2003 Interpolation requirements for implicit gradient-enhanced continuum damage models. Communications in Numerical Methods in Engineering 19,563-572.
497. Temizer I, Wriggers P and Hughes TJR 2011 Contact treatment in isogeometric analysis with NURBS. Computer Methods in Applied Mechanics and Engineering 200,1100-1112.
498. Verhoosel CV, Scott MA, de Borst R and Hughes TJR 2011a An isogeometric approach to cohesive zone modeling. International Journal for Numerical Methods in Engineering 87,336-360.
499. Verhoosel CV, Scott MA, Hughes TJR and de Borst R 2011b An isogeometric analysis approach to gradient damage models. International Journal for Numerical Methods in Engineering 86,115-134.
500. Wall WA, Frenzel MA and Cyron C 2008 Isogeometric structural shape optimization. Computer Methods in Applied Mechanics and Engineering 197,2976-2988.
501. Xu XP and Needleman A 1993 Void nucleation by inclusion debonding in a crystal matrix. Modelling and Simulation in Materials Science and Engineering 1,111-132.