Numerical analysis and simulation of plasticity

Handbook of Numerical Analysis

Volumn 6, Issue , 1998, Pages 183-499

  Simo, J C ^a  

^a Stanford University   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 70350313479     PISSN: 15708659     EISSN: None     Source Type: Book Series    
DOI: 10.1016/S1570-8659(98)80009-4     Document Type: Review

References (285)

1. Achenbach J.D. Wave Propagation in Elastic Solids. 5th print (1987), North-Holland, New York
2. Anand L. On H. Henky's approximate strain-energy function for moderate deformations. J. Appl. Mech. 46 (1979) 78-82
3. Anand L. Constitutive equations for hot working of metals. Internat. J. Plasticity 1 (1985) 213-231
4. Anand L., Kim K.H., and Shawki T.G. Onset of shear localization in viscoplastic solids. J. Mech. Phys. Solids 35 (1987) 407-429
5. Antman S.S., and Osborn J.E. The principle of the virtual work and integral laws of motion. Arch. Rational Mech. Anal. 69 (1979) 231-262
6. Argyris J.H. Elasto-plastic matrix analysis of three dimensional continua. J. Roy. Aeronaut. Soc. 69 (1965) 633-635
7. Argyris J.H., and Doltsinis J.St. On the large strain inelastic analysis in natural formulation. Part I: Quasi-static problems. Comput. Methods Appl. Mech. Engrg. 20 (1979) 213-251
8. Argyris J.H., and Doltsinis J.St. On the large strain inelastic analysis in natural formulation. Part II: Dynamic problems. Comput. Methods Appl. Mech. Engrg. 21 (1980) 213-251
9. Argyris J.H., Doltsinis J.St., Pimenta P.M., and Wüstenberg H. Thermomechanical response of solids at high strains-natural approach. Comput. Methods Appl. Mech. Engrg. 32 (1982) 3-57
10. Armero F., and Simo J.C. A new unconditionally stable fractional step method for coupled thermomechanical problems. Internat. J. Numer. Methods Engrg. 35 (1992) 737-766
11. Armero F., and Simo J.C. A priori stability estimates and unconditionally stable product algorithms for nonlinear coupled thermoplasticity. Internat. J. Plasticity 9 (1993) 749-782
12. Arnold V.I. Mathematical Methods of Classical Mechanics. 2nd edition (1989), Springer, Amsterdam
13. Asaro R.J. Geometrical effects in the inhomogeneous deformation of ductile single crystals. Acta Metal. 27 (1979) 445-453
14. Asaro R.J. Micromechanics of crystals and polycrystals. Advances in Applied Mechanics 23 (1983)
15. Asaro R.J., and Rice J.R. Strain localization in ductile single crystals. J. Mech. Phys. Solids 25 (1977) 309-338
16. Ball J.M. Convexity conditions and existence theorems in nonlinear elasticity. Arch. Rational Mech. Anal. 63 (1977) 337-403
17. Ball J.M., and Knowles G. Lyapunov functions for thermomechanics with spatially varying boundary temperatures. Arch. Rat. Mech. Anal. 92 (1986) 193-204
18. Bernardou M., Ciarlet P.G., and Hu J. On the convergence of the semi-discrete incremental method in nonlinear three-dimensional elasticity. J. Elasticity 14 (1984) 425-440
19. Bertsekas D.P. Constrained Optimization and Lagrange Multiplier Methods (1982), Academic Press, Berlin
20. Bever M.B., Holt D.L., and Titchener A.L. The Stored Energy of Cold Work (1973), Pergamon, New York
21. Boyce M.C., Weber G.G., and Parks D.M. On the kinematics of finite strain plasticity. J. Mech. Phys. Solids 37 5 (1989) 647-666
22. Brenan K.E., Campbell S.L., and Petzold L.R. Numerical Solution of Initial-Value Problems in Differential-Algebraic Equations (1989), North-Holland, Oxford
23. Brezis H. Operateurs Maximaux Monotones et Semi-Groupes des Contractions (1973), North-Holland, New York
24. Brezzi F., and Fortin M. Mixed and Hybrid Finite Element Methods (1991), Springer, Amsterdam
25. Burrage K., and Butcher J.C. Stability criteria for implicit Runge-Kutta methods. SIAM J. Numer. Math. 16 1 (1979) 46-57
26. Burrage K., and Butcher J.C. Nonlinear stability of a general class of differential equation methods. BIT 20 (1980) 185-203
27. Butcher J.C. A stability property of implicit Runge-Kutta methods. BIT 15 (1975) 358-361
28. Carlson D.E. Linear thermoelasticity. In: Fluegge S. (Ed). Handbuch der Physik VI/2a (1972), Springer, Berlin 297-346
29. Casey J., and Naghdi P.M. On the characterization of strain in plasticity. J. Appl. Mech. 48 (1981) 285-295
30. Casey J., and Naghdi P.M. On the nonequivalence of the stress space and strain space formulations of plasticity theory. J. Appl. Mech. 50 (1983) 350-354
31. Casey J., and Naghdi P.M. On the use of invariance requirements for intermediate configurations associated with the polar decomposition of a deformation gradient. Quart. Appl. Math. 41 (1983) 339-342
32. Chadwick P. Continuum Mechanics (1976), Wiley, Berlin
33. Chorin A.E. On the convergence of discrete approximations to the Navier-Stokes equations. Math. Comp. 23 (1969) 341-353
34. Chorin A.J., Hughes T.J.R., Marsden J.E., and McCracken M. Product formulas and numerical algorithms. Comm. Pure Appl. Math. 31 (1978) 205-256
35. Christoffersen J., and Hutchinson J.W. A class of phenomenological theories of plasticity. J. Mech. Phys. Solids 27 (1979) 465-487
36. Ciarlet P.G. The Finite Element Method for Elliptic Problems (1978), North-Holland, New York
37. Ciarlet P.G. Mathematical Elasticity I: Three-Dimensional Elasticity (1988), North-Holland, Amsterdam
38. English translation of. Ciarlet P.G. Introduction to Numerical Linear Algebra and Optimization. 1982 edition in Cambridge Texts in Applied Mathematics (1989), Cambridge University Press, Amsterdam
39. Clifton R.J. Adiabatic shear banding. Materials Response to Ultra-High Strain Rates, Chapter 8 (1980), National Materials Advisory Board (NRC), Cambridge
40. Coleman B.D., and Gurtin M. Thermodynamics with internal variables. J. Chem. Phys. 47 (1967) 597-613
41. Coleman B.D., and Noll W. The thermodynamics of elastic materials with heat conduction and viscosity. Arch. Rational Mech. Anal. 13 (1963) 167-178
42. Commi C., and Maier G. On the convergence of a backward difference iterative procedure in elastoplasticity with nonlinear kinematic and isotropic hardening. In: Owen D.R.J., Hinton E., and Onate E. (Eds). Computational Plasticity, Models, Software and Applications (1989), Pineridge, Washington, DC 323-334
43. Corigliano A., and Perego U. Convergent and unconditionally stable finite-step dynamic analysis of elastoplastic structures. Proc. Europ. Conf. on New Advances in Computational Structural Mechanics (1991) 577-584
44. Cormeau I.C. Numerical stability in quasi-static elasto/visco-plasticity. Internat. J. Numer. Methods Engrg. 9 (1975) 109-127
45. Cottrell A.H. Dislocations and Plastic Flow in Crystals (1967), Oxford University Press, Swansea
46. Crouzeix M. Sur la B-stabilité des méthodes de Runge-Kutta. Numer. Math. 32 (1979) 75-82
47. Curtiss C.F., and Hirschfelder J.C. Integration of stiff equations. Proc. Nat. Acad. Sci. USA 38 (1952) 235-243
48. Dafalias Y.F. A missing link in the formulation and numerical implementation of finite transformation elastoplasticity. In: Willam K.J. (Ed). Constitutive Equations: Macro and Computational Aspects (1984), ASME, London
49. Dafermos C.M. Contraction semigroups and trend to equilibrium in continuum mechanics. Lecture Notes in Math. 503 (1976), Springer, New York 295-306
50. Dahlquist G. A special stability problem for linear multistep methods. BIT 3 (1963) 27-43
51. Dundee 1975. Dahlquist G. Error analysis of a class of methods of stiff non-linear initial value problems. Numerical Analysis. Lecture Notes in Math. 506 (1975), Springer, Berlin 60-74
52. Dahlquist G. G-stability is equivalent to A-stability. BIT 18 (1978) 384-401
53. Demengel F. Compactness theorems for spaces of functions with bounded derivatives and applications to limit analysis problems in plasticity. Arch. Rational Mech. Anal. 105 2 (1989) 123-161
54. Dennis J.E., and Schnabel R.B. Numerical Methods for Unconstrained Optimization (1983), Prentice-Hall, Berlin
55. Desai C.S., and Siriwardane H.J. Constitutive Laws for Engineering Materials (1984), Prentice-Hall, Englewood Cliffs, N.J.
56. Dienes J.K. On the analysis of rotation and stress rate in deforming bodies. Acta Mech. 32 (1979) 217-232
57. Dillon O.W. Coupled thermoplasticity. J. Mech. Phys. Solids 11 (1963) 21-33
58. DiMaggio F.L., and Sandler I.S. Material models for granular soils. J. Engrg. Mech. (1971) 935-950
59. Doherty W.P., Wilson E.L., and Taylor R.L. Stress analysis of axisymmetric solids utilizing higher order quadrilateral finite elements. SESM Report No. 69-3 (1969), Department of Civil Engineering, University of California, Englewood Cliffs, NJ
60. Doltsinis I.St. Aspects of modeling and computation in the analysis of metal forming. Engrg. Comput. 7 (1990) 2-20
61. Duhem P. Traité d'Energetique ou de Thermodynamique Générale (1911), Gauthier-Villars, Berkeley
62. English translation: (1976) (Springer, Berlin). Duvaut G., and Lions J.L. Les Inequations en Mecanique et en Physique (1972), Dunod, Paris
63. Ericksen J.L. Thermoelastic stability. Proc. 5th National Cong. Appl. Mech. (1966) 187-193
64. Eterovich A.L., and Bathe K.J. A hyperelastic-based large strain elasto-plastic constitutive formulation with combined isotropic-kinematic hardening using logarithmic stresses and strain measures. Internat. J. Numer. Methods Engrg. 30 6 (1990) 1099-1115
65. Eve R.A., Reddy B.D., and Rockefellar R.T. An internal variable theory of elastoplasticity based on the maximum work inequality. Quart. Appl. Math. 48 (1990) 59-83
66. Farhat C., Park K.C., and Dubois-Pelerin Y. An unconditionally stable staggered algorithm for transients finite element analysis of coupled thermoelastic problems. Comput. Methods Appl. Mech. Engrg. 85 (1991) 349-365
67. Flory R.J. Thermodynamic relations for highly elastic materials. Trans. Faraday Soc. 57 (1961) 829-838
68. Foias C., Jolly M.S., Kevrekidis I.G., and Titi E.S. Dissipativity of numerical schemes. Nonlinearity 4 (1991) 591-613
69. Gear C.W. Numerical Initial Value Problems in Ordinary Differential Equations (1971), Prentice-Hall, Paris
70. Germain P., Nguyen Q.S., and Suquet P. Continuum thermodynamics. Trans. ASME 50 (1983) 1010-1020
71. Girault V., and Raviart P.A. Finite Element Methods for Navier-Stokes Equations. Theory and Algorithms (1986), Springer, Englewood Cliffs, NJ
72. Glowinski R., and Le Tallec P. Finite element analysis in nonlinear incompressible elasticity. In: Oden J.T., and Carey G.F. (Eds). Finite Elements V: Special Problems in Solid Mechanics (1984), Prentice-Hall, Berlin
73. Glowinski R., and Le Tallec P. Numerical Simulation of Continuous Media by Augmented Lagrangian and Operator Splitting Methods. SIAM Studies in Applied Mathematics (1989), SIAM, Englewood Cliffs, NJ
74. Goudreau G.L., and Hallquist J.O. Recent developments in large-scale finite element Lagrangian hydrocode technology. Comput. Methods Appl. Mech. Engrg. 33 (1982) 725-757
75. Green A.E., and Naghdi P.M. A general theory of an elastic-plastic continuum. Arch. Rational Mech. Anal. 18 (1964) 251-281
76. Green A.E., and Naghdi P.M. A thermodynamic development of elastic-plastic continua. Proceedings of IUTAM Symposia. Vienna, June 22-28 (1966)
77. Green A.E., and Zerna W. Theoretical Elasticity. 2nd edition (1960), Clarendon Press, Philadelphia
78. Gurtin M.E. The linear theory of elasticity. In: Truesdell C. (Ed). Mechanics of Solids. Handbuch der Physik VIa/2 II (1972), Springer, Oxford
79. Gurtin M.E. Thermodynamics and stability. Arch. Rational Mech. Anal. 59 (1975) 53-96
80. Gurtin M.E. An Introduction to Continuum Mechanics (1981), Academic Press, Berlin
81. Hairer E., Norsett S.P., and Wanner G. Solving Ordinary Differential Equations I, Nonstiff Problems. 2nd edition (1993), Springer, Orlando, FL
82. Hairer E., and Wanner G. Solving Ordinary Differential Equations II, Stiff and Differential-Algebraic Problems (1991), Springer, Berlin
83. Hallquist J.O. NIKE 2D: An implicit, finite deformation, finite element code for analyzing the static and dynamic response of two-dimensional solids. Lawrence Livermore National Laboratory, Report UCRL-52678 (1984), University of California, Berlin
84. Hallquist J.O. DYNA 3D: An explicit, finite element code for dynamic analysis in three dimensions (1988), Lawrence Livermore National Laboratory University of California, Livermore
85. Rev. 3. Hallquist J.O., and Benson D.J. DYNA3D User's Manual. Report No. UCID-19592 (1987), Lawrence Livermore National Laboratory, Livermore
86. Halphen B., and Nguyen Q.S. Sur les materiaux standards generalises. J. Mecanique 14 (1975) 39-63
87. Harren S.V. The finite deformation of rate-dependent polycrystals I. A self-consistent framework. J. Mech. Phys. Solids 39 3 (1991) 345-360
88. Havner K.S. A discrete model for the prediction of subsequent yield surfaces in polycrystalline elasticity. Int. J. Solids Structures 7 (1971) 719-730
89. Havner K.S. Finite Plastic Deformation of Crystalline Solids. Cambridge Monographs on Mechanics and Applied Mathematics (1992), Cambridge University Press
90. Herrmann L.R. Elasticity equations for incompressible and nearly incompressible materials by a variational theorem. AIAA J. 3 10 (1965)
91. Hilber H.M. Analysis and design of numerical integration methods in structural dynamics. Report No. E.E.R.C. 76-29 (1976), Earthquake Eng. Research Center, University of California, London
92. Hilber H.M., Hughes T.J.R., and Taylor R.L. Improved numerical dissipation for time integration algorithms in structural dynamics. Earthquake Engrg. & Struct. Dyn. 5 (1977) 283-292
93. Hill R. The Mathematical Theory of Plasticity. Last edition (1950), Oxford University Press, Berkeley, CA
94. Hill R. A general theory of uniqueness and stability in elastic-plastic solids. J. Mech. Phys. Solids 6 (1958) 236-249
95. Hill R. Generalized constitutive relations for incremental deformation of metal crystals by multislip. J. Mech. Phys. Solids 14 (1966) 95-102
96. Hill R. Aspects of invariance in solid mechanics. Adv. in Appl. Mech. 18 (1978) 1-75
97. Hill R., and Havner K.S. Perspectives in the mechanics of elastoplastic crystals. J. Mech. Phys. Solids 23 (1982) 5-22
98. Hill R., and Rice J.R. Constitutive analysis of elastic-plastic crystals at arbitrary strain. J. Mech. Phys. Solids 20 (1972) 401-413
99. Hinton E., and Owen D.R.J. Finite Elements in Plasticity: Theory and Practice (1980), Pineridge Press, Oxford
100. Hoger A., and Carlson D.E. Determination of the stretch and rotation in the polar decomposition of the deformation gradient. Quart. Appl. Math. 42 (1984) 113-117
101. Hoger A., and Carlson D.E. On the derivative of the square root of a tensor and Guo's rate theorems. J. Elasticity 14 (1984) 329-336
102. Hughes T.J.R. Generalization of selective integration procedures to anisotropic and nonlinear media. Internat. J. Numer. Methods Engrg. 15 9 (1980) 1413-1418
103. Hughes T.J.R. Analysis of transient algorithms with particular emphasis in stability behavior. In: Belytschko T., and Hughes T.J.R. (Eds). Computational Methods for Transient Analysis (1983), North-Holland, Swansea, Wales
104. Hughes T.J.R. Numerical implementation of constitutive models: rate-independent deviatoric plasticity. In: Nemat-Nasser S., Asaro R., and Hegemier G. (Eds). Theoretical Foundations for Large Scale Computations of Nonlinear Material Behavior (1984), Martinus Nijhoff Publishers, Amsterdam
105. Hughes T.J.R. The Finite Element Method (1987), Prentice-Hall, The Netherlands
106. Hughes T.J.R., and Taylor R.L. Unconditionally stable algorithms for quasi-static elasto viscoplastic finite element analysis. Comput. & Structures 8 (1978) 169-173
107. Hughes T.J.R., and Winget J. Finite rotation effects in numerical integration of rate constitutive equations arising in large-deformation analysis. Internat. J. Numer. Methods Engrg. 15 9 (1980) 1413-1418
108. Hundsdorfer W.H. The Numerical Solution of Nonlinear Stiff Initial Value Problems: An Analysis of One Step Methods. CWI Tract, Centrum voor Wiskunde en Informatica (1985), Center for Mathematics and Computer Science, Englewood Cliffs, NJ
109. Iwan D.W., and Yoder P.J. Computational aspects of strain-space plasticity. J. Engrg. Mech. ASCE 109 (1983) 231-243
110. Johnson C. Existence theorems for plasticity problems. J. Math. Pures Appl. 55 (1976) 431-444
111. Johnson C. On finite element methods for plasticity problems. Numer. Math. 26 (1976) 79-84
112. Johnson C. A mixed finite element for plasticity. SIAM J. Numer. Anal. 14 (1977) 575-583
113. Johnson C. On plasticity with hardening. J. Appl. Math. Anal. 62 (1978) 325-336
114. Johnson C. Numerical Solutions of Partial Differential Equations by the Finite Element Method (1987), Cambridge University Press, Amsterdam
115. Johnson C., and Bammann D.J. A discussion of stress rates in finite deformation problems. Internat. J. Solids Structures 20 (1984) 725-737
116. Kachanov L.M. Fundamentals of the Theory of Plasticity (1974), MIR Publishers, Cambridge, MA
117. Karmanov V. Programmation Mathematique (1977), MIR Publishers, Moscow
118. Kato T. Perturbation Theory for Linear Operators. 2nd edition (1976), Springer, Moscow
119. Key S.W. A variational principle for incompressible and nearly incompressible anisotropic elasticity. Internat. J. Solids Structures 5 (1969) 951-964
120. Key S.W. HONDO - A finite element computer program for the large deformation response of axisymmetric solids. Report 74-0039 (1974), Sandia National Laboratories, Berlin
121. Key S.W., and Krieg R.D. On the numerical implementation of inelastic time dependent and time independent, finite strain constitutive equations in structural mechanics. Comput. Methods Appl. Mech. Engrg. 33 (1982) 439-452
122. Key S.W., Stone C.M., and Krieg R.D. Dynamic relaxation applied to the quasi-static, large deformation, inelastic response of axisymmetric solids. In: Wunderlich, et al. (Ed). Nonlinear Finite Element Analysis in Structural Mechanics (1981), Springer, Albuquerque, NM
123. Kim S.J., and Oden J.T. Finite element analysis of a class of problems in finite strain elastoplasticity based on the thermodynamical theory of materials of type N. Comput. Methods Appl. Mech. Engrg. 53 (1990) 277-302
124. Koiter W.T. General theorems for elastic-plastic solids, Chapter IV. Progress in Solid Mechanics 1 (1960) 165-220
125. Kratochvil J. On a finite strain theory of elastic-inelastic materials. Acta Mech. 16 (1973) 127-142
126. AMD-20. Krieg R.D., and Key S.W. Implementation of a time dependent plasticity theory into structural computer programs. In: Stricklin J.A., and Saczlski K.J. (Eds). Constitutive Equations in Viscoplasticity: Computational and Engineering Aspects (1976), ASME, Berlin
127. Krieg R.D., and Krieg D.B. Accuracies of numerical solution methods for the elastic-perfectly plastic model. J. Pressure Vessel Tech. 99 (1977)
128. Kroner E., and Teodosiu C. Lattice defect approach to plasticity and viscoplasticity. In: Sawczuk A. (Ed). Problems of Plasticity (1972), Noordhoff, New York
129. Laursen T.A., and Simo J.C. A continuum based finite element formaulation for the implicit finite element solution of multi-body, large deformation, frictional contact problems. Internat. J. Numer. Methods Engrg. 36 (1993) 3451-3485
130. Lee E.H. Elastic-plastic deformations at finite strains. J. Appl. Mech. 36 (1969) 1-6
131. Lee E.H., and Liu D.T. Finite strain elastic-plastic theory particularly for plane wave analysis. J. Appl. Phys. 38 (1967)
132. Lee R.L., Gresho P.M., and Sani R.L. Smoothing techniques for certain primitive variable solutions of the Navier-Stokes equations. Internat. J. Numer. Methods Engrg. 14 12 (1979) 1785-1804
133. Lewis R.W., and Schrefler B.A. The Finite Element Method in the Deformation and Consolidation of Porus Media (1987), Wiley, Leiden
134. Lehmann T. General frame for the definition of constitutive laws for large non-isothermal elastic-plastic and elastic-viscoplastic deformations. In: Lehmann T. (Ed). The Constitutive Law in Thermoplasticity. CISM Courses and Lectures No. 281 (1982), Springer, New York
135. Lehmann T., and Blix U. On the coupled thermo-mechanical process in the necking problem. Internat. J. Plasticity 1 (1985) 175-188
136. Lemonds J., and Needleman A. Finite element analysis of shear localization in rate and temperature dependent solids. Mech. Mater. 5 (1986) 339-361
137. Loret B., and Prevost J.H. Accurate numerical solutions of Drucker-Prager elastic-plastic models. Comput. Methods Appl. Mech. Engrg. 54 (1986) 259-278
138. Lubliner J. On the thermodynamic foundations of non-linear solid mechanics. Internat. J. Nonlinear Mech. 7 (1972) 237-254
139. Lubliner J. On the structure of the rate equations of materials with internal variables. Acta Mech. 17 (1973) 109-119
140. Lubliner J. Normality rules in large-deformation plasticity. Mech. Mater. 5 (1986) 29-34
141. Lubliner J. Plasticity Theory (1990), MacMillan, Berlin
142. Luenberger D.G. Optimization by Vector Space Methods (1972), Wiley, London
143. Luenberger D.G. Linear and Nonlinear Programming (1984), Addison-Wesley, New York
144. Maenchen G., and Sacks S. The tensor code. In: Alder B., Fernback S., and Rotenberg M. (Eds). Methods of Computational Physics 3 (1964), Academic Press, Menlo Park CA 181-210
145. Maier G. A matrix structural theory of piecewise linear elastoplasticity with interacting yield planes. Meccanica (1970) 54-66
146. Maier G., and Grierson D. Engineering Plasticity by Mathematical Programming (1979), Pergamon Press, New York
147. Malvern L. An Introduction to the Mechanics of a Continuous Media (1969), Prentice-Hall, New York
148. Mandel J. Contribution theorique a l'etude de l'ecrouissage et des lois de l'ecoulement plastique. Proc. 11th Internat. Congress on Applied Mechanics (1964) 502-509
149. Mandel J. Generalisation de la theorie de la plasticite de W.T. Koiter. Internat. J. Solids Structures 1 (1965) 273-295
150. Sept.-Oct. 1971. Mandel J. Plasticité Classique et Viscoplasticité. Course held at the Department of Mechanics of Solids (1972), Springer, Englewood Cliffs, NJ
151. Mandel J. Thermodynamics and plasticity. In: Delgado Domingers J.J., Nina N.R., and Whitelaw J.H. (Eds). Foundations of Continuum Thermodynamics (1974), Macmillan, New York 283-304
152. Marcal P.V., and King I.P. Elastoplastic analysis of two-dimensional stress systems by the finite element method. Internat. J. Mech. Sci. 9 (1967) 143-155
153. Marchuk G.I. Splitting and alternating direction methods. In: Ciarlet P.G., and Lions J.L. (Eds). Handbook for Numerical Analysis I (1990), North-Holland, London 197-462
154. Marsden J. On product formulas for nonlinear semigroups. J. Funct. Anal. 13 (1973) 51-72
155. Marsden J. A formula for the solution of the Navier-Stokes equations based on a method of Chorin. Bull. Amer. Math. Soc. 80 (1974) 154-158
156. Marsden J.E., and Hughes T.J.R. Mathematical Foundations of Elasticity (1983), Prentice-Hall, Amsterdam
157. Martin J.B. Convergence and shakedown for discrete load steps in statically loaded elastic-plastic bodies. Mech. Structures Mach. 16 1 (1988) 1-16
158. Matthies H. Problems in plasticity and their finite element approximation. Ph.D. Thesis (1978), Department of Mathematics, Massachusetts Institute of Technology, Englewood Cliffs, NJ
159. Matthies H. Existence theorems in thermo-plasticity. J. Mech. 18 4 (1979) 695-711
160. Matthies H., and Strang G. The solution of nonlinear finite element equations. Internat. J. Numer. Methods Engrg. 14 11 (1979) 1613-1626
161. Matthies H., Strang G., and Christiansen E. The saddle point of a differential. In: Glowinski, Rodin, and Zienkiewicz (Eds). Energy Methods in Finite Element Analysis (1979), Wiley, Cambridge, MA
162. McClintock F.A., and Argon A.S. Mechanical Behavior of Materials (1968), Addison-Wesley, New York
163. McMeeking R.M., and Rice J.R. Finite-element formulations for problems of large elastoplastic deformations. Internat. J. Solids Structures 11 (1975) 601-616
164. Mehrabadi M.M., and Nemat-Nasser S. Some basic kinematical relations for finite deformations of continua. Mech. Mater. 6 (1987) 127-138
165. Molinari A., and Clifton R.J. Localisation de la déformation viscoplastique encisaillement simple: Résultats exacts en théorie non linéaire. C. R. Acad. Sci. Sér. II 296 (1983) 1-4
166. Moran B., Ortiz M., and Shi F. Formulation of implicit finite element methods for multiplicative plasticity. Internat. J. Numer. Methods Engrg. 29 (1990) 483-514
167. Moran B., Ortiz M., and Shih C.F. An analysis of cracks in ductile single crystals I. Anti-plane shear. J. Mech. Phys. Solids 40 2 (1992) 291-314
168. Moreau J.J. Application of convex analysis to the treatment of elastoplastic systems. In: Germain P., and Nayroles B. (Eds). Applications of Methods of Functional Analysis to Problems in Mechanics (1976), Springer, Reading, MA
169. Moreau J.J. Evolution problem associated with a moving convex set in a Hilbert space. J. Differential Equations 26 (1977) 347-374
170. Morman K.N. The generalized strain measure with application to non-homogeneous deformations in rubber-like solids. J. Appl. Mech. 53 (1987) 726-728
171. Naghdi P.M. Stress-strain relations in plasticity and thermoplasticity. Proc. 2nd Symposium on Naval Structural Mechanics (1960), Pergamon Press, Berlin
172. Naghdi P.M., and Trapp J.A. The significance of formulating plasticity theory with reference to loading surfaces in strain space. Internat. J. Engrg. Sci. 13 (1975) 785-797
173. Nagtegaal J.C. On the implementation of inelastic constitutive equations with special reference to large deformation problems. Comput. Methods Appl. Mech. Engrg. 33 (1982) 469-484
174. Nagtegaal J.C., and De Jong J.E. Some computational aspects of elastic-plastic large strain analysis. Internat. J. Numer. Methods Engrg. 17 (1981) 15-41
175. Nagtegaal J.C., Parks D.M., and Rice J.R. On numerically accurate finite element solutions in the fully plastic range. Comput. Methods Appl. Mech. Engrg. 4 (1974) 153-177
176. Nagtegaal J.C., and Veldpaus F.E. On the implementation of finite strain plasticity equations in a numerical model. In: Pittman J.F.T., Zienkiewicz O.C., Wood R.D., and Alexander J.M. (Eds). Numerical Analysis of Forming Processes (1984), Wiley, London
177. Nayak G.C., and Zienkiewicz O.C. Elastoplastic stress analysis. Generalization of various constitutive equations including stress softening. Internat. J. Numer. Methods Engrg. 5 (1972) 113-135
178. Needleman A. Finite elements for finite strain plasticity problems. In: Lee E.H., and Mallet R.L. (Eds). Plasticity of Metals at Finite Strains: Theory, Computation, and Experiment (1982) 387-436
179. Needleman A., and Tvergaard V. Finite element analysis of localization plasticity. In: Oden J.T., and Carey G.F. (Eds). Finite Elements V: Special Problems in Solid Mechanics (1984), Prentice-Hall, New York
180. Nemat-Nasser S. On finite plastic flow of crystalline solids and geomaterials. J. Appl. Mech. 50 (1983) 1114-1126
181. Nguyen Q.S. On the elastic-plastic initial boundary value problem and its numerical integration. Internat. J. Numer. Methods Engrg. 11 (1977) 817
182. Ogden R.W. Elastic deformations in rubberlike solids. In: Hopkins H.G., and Sewell M.J. (Eds). Mechanics of Solids. Rodney Hill 60th Anniversary Volume (1982), Pergamon, Englewood Cliffs, NJ 319-323
183. Ogden R.W. Nonlinear Elastic Deformations (1984), Ellis Horwood Ltd., Oxford
184. Olver P.J. Applications of Lie Groups to Differential Equations (1986), Springer, West Sussex, England
185. Ortega J.M., and Rheinboldt W.C. Iterative Solution of Nonlinear Equations in Several Variables (1970), Academic Press, Berlin
186. Ortiz M., and Martin J.E. Symmetry preserving return mapping algorithms and minimum work paths: A unification of concepts. Internat. J. Numer. Methods Engrg. 28 (1989) 1839-1853
187. Ortiz M., and Popov E.P. Accuracy and stability of integration algorithms for elastoplastic constitutive equations. Internat. J. Numer. Methods Engrg. 21 (1985) 1561-1576
188. Ortiz M., and Simo J.C. An analysis of a new class of integration algorithms for elastoplastic constitutive relations. Internat. J. Numer. Methods Engrg. 23 (1986) 353-366
189. Park K.C., and Felippa C.A. Partitioned analysis of coupled problems. In: Belytschko T., and Hughes T.J.R. (Eds). Computational Methods in Transient Analysis (1983), North-Holland, San Diego, CA
190. Park K.C., Felippa C.A., and DeRuntz L.A. Stabilization of staggered solution procedures for fluid-structure interaction analysis. In: Belytschko T., and Geers T.L. (Eds). Computational Methods for Fluid-Structure Interaction Problems. ASME Applied Mechanics Symposia Series AMD 26 (1977) 94-124
191. Parkus H. Thermoelasticity. 2nd edition (1976), Springer, Amsterdam
192. Pazy A. Semigroups of Linear Operators and Applications to Partial Differential Equations (1983), Springer, Wien
193. Peric F., Owen D.R.J., and Honnor M.E. A model for finite strain elastoplasticity. In: Owen R., Hinton E., and Onate E. (Eds). Proc. 2nd Internat. Conf. on Computational Plasticity (1989), Pineridge, New York 111-126
194. Perzyna P. Thermodynamic theory of viscoplasticity. Advances in Applied Mechanics 11 (1971), Academic Press, Swansea
195. Phillips A. The foundation of thermoplasticity-Experiments and theory. In: Zeman J.L., and Ziegler F. (Eds). Topics in Applied Continuum Mechanics (1974), Springer, New York
196. Pinsky P., Ortiz M., and Pister K.S. Numerical integration of rate constitutive equations in finite deformation analysis. Comput. Methods Appl. Mech. Engrg. 40 (1983) 137-158
197. Pitkaranta J., and Sternberg R. Error bounds for the approximation of the Stokes problem using bilinear/constant elements on irregular quadrilateral meshes. Report MAT-A222 (1984), Helsinki University of Technology, Institute of Mathematics, Wien
198. Prager W. A new method of analyzing stress and strains in work-hardening plastic solids. J. Appl. Mech. 23 (1956) 493-496
199. Rebelo N., Nagtegaal J.C., and Hibbitt H.D. Finite element analysis of sheet forming process. Internal. J. Numer. Methods Engrg. 30 (1990) 1739-1758
200. Reed R.E. Physical Metallurgy Principles (1964), Van Nostrand, Finland
201. Resende L., and Martin J.B. Formulation of Drucker-Prager cap model. J. Engrg. Mech. 111 7 (1986) 855-865
202. Rice J.R., and Tracey D.M. Computational fracture mechanics. In: Fenves S.J. (Ed). Proc. Symposium on Numerical Methods in Structural Mechanics. Urbana, Illinois (1973), Academic Press, New York
203. Richtmyer R.D., and Morton K.W. Difference Methods for Initial Value Problems. 2nd edition (1967), Interscience, New York
204. Rolph III W.D., and Bathe K.J. On a large strain finite-element formulation for elasto-plastic analysis. In: Willam K.J. (Ed). Constitutive Equations, Macro and Computational Aspects (1984), Winter Annual Meeting, ASME, New York
205. Rubinstein R., and Atluri S.N. Objectivity of incremental constitutive relations over finite time steps in computational finite deformation analyses. Comput. Methods Appl. Mech. Engrg. 36 (1983)
206. Sandler I.S., DiMaggio F.L., and Baladi G.Y. Generalized CAP model for geological materials. J. Geotech. Engineering Division 102 GT7 (1976) 683-699
207. Sandler I.S., and Rubin D. An algorithm and a modular subroutine for the cap model. Internat. J. Numer. Anal. Methods Geomech. 3 (1979) 173-186
208. Schreyer H.L., Kulak R.L., and Kramer J.M. Accurate numerical solutions for elastic-plastic models. J. Pressure Vessel Tech. 101 (1979) 226-334
209. Scott L.R., and Vogelius M. Conforming finite element methods for incompressible and nearly incompressible continua. Lectures Appl. Math. 22 (1985) 221-244
210. Scovel C. Symplectic numerical integration of Hamiltonian systems. In: Ratiu T. (Ed). Proc. Workshop. June 5-15, 1989. The Geometry of Hamiltonian Systems (1991), Springer 463-496
211. Shawki T.G., and Clifton R.J. Shear band formation in thermal viscoplastic materials. Mech. Mater. 8 (1989) 13-43
212. Simo J.C. On the computational significance of the intermediate configuration and hyperelastic relations in finite deformation elastoplasticity. Mech. Mater. 4 (1986) 439-451
213. 2-flow theory exhibiting a corner-like effect and suitable for large-scale computation. Comput. Methods Appl. Mech. Engrg. 62 (1987) 169-194
214. Simo J.C. A framework for finite strain elastoplasticity based on maximum plastic dissipation and the multiplicative decomposition: Part I. Continuum formulation. Comput. Methods Appl. Mech. Engrg. 66 (1988) 199-219
215. Simo J.C. A framework for finite strain elastoplasticity based on maximum plastic dissipation and the multiplicative decomposition: Part II. Computational aspects. Comput. Methods Appl. Mech. Engrg. 68 (1988) 1-31
216. Simo J.C. Nonlinear stability of the time discrete variational problem in nonlinear heat conduction and elastoplasticity. Comput. Methods Appl. Mech. Engrg. 88 (1991) 111-121
217. Simo J.C. Algorithms for multiplicative plasticity that preserve the form of the return mappings of the infinitesimal theory. Comput. Methods Appl. Mech. Engrg. 99 (1992) 61-112
218. Simo J.C., and Armero F. Geometrically nonlinear enhanced strain mixed methods and the method of incompatible modes. Internat. J. Numer. Methods Engrg. 33 (1992) 1413-1449
219. Simo J.C., and Armero F. Unconditional stability and long term behavior of transient algorithms for the incompressible Navier-Stokes and Euler equations. Comput. Methods Appl. Mech. Engrg. 111 (1993) 111-154
220. Simo J.C., Armero F., and Taylor R.L. Improved versions of assumed enhanced strain tri-linear elements for 3D deformation problems. Comput. Methods Appl. Mech. Engrg. 110 (1993) 359-386
221. Simo J.C., and Govindjee S. Exact closed-form solution of the return mapping algorithm in plane stress elasto-viscoplasticity. Engrg. Comput. 4 3 (1988) 254-258
222. Simo J.C., and Hughes T.J.R. On the variational foundations of assumed strain methods. J. Appl. Mech. 53 1 (1986) 51-54
223. Simo J.C., and Hughes T.J.R. General return mapping algorithms for rate independent plasticity. In: Desai C.S. (Ed). Constitutive Equations for Engineering Materials (1987) 221-231
224. Simo J.C., Ju J.W., Pister K.S., and Taylor R.L. An assessment of the cap model: Consistent return algorithms and rate-dependent extension. ASCE, J. Engrg. Mech. 144 2 (1988) 191-218
225. Simo J.C., Kennedy J.G., and Govindjee S. Non-smooth multisurface plasticity and viscoplasticity. Loading/unloading conditions and numerical algorithms. Internat. J. Numer. Methods Engrg. 26 (1988) 2161-2185
226. Simo J.C., Kennedy J.G., and Taylor R.L. Complementary mixed finite element formulations of elastoplasticity. Comput. Methods Appl. Mech. Engrg. 74 (1988) 177-206
227. Simo J.C., and Marsden J.E. On the rotated stress tensor and the material version of the Doyle-Ericksen formula. Arch. Rational Mech. Anal. 86 (1984) 213-231
228. Simo J.C., Marsden J.E., and Krishnaprasad P.S. The Hamiltonian structure of elasticity. The convective representation of solids, rods and plates. Arch. Rational Mech. Anal. 104 2 (1988) 125-183
229. Simo J.C., and Miehe C. Coupled associative thermoplasticity at finite strains. Formulation, numerical analysis and implementation. Comput. Methods Appl. Mech. Engrg. 98 (1992) 41-104
230. in press. Simo J.C., Oliver X., and Armero F. Analysis of strong discontinuities in rate independent softening materials. Internat. J. Comput. Mech. (1993)
231. Simo J.C., and Ortiz M. A unified approach to finite deformation elastoplasticity based on the use of hyperelastic constitutive equations. Comput. Methods Appl. Mech. Engrg. 49 (1985) 221-245
232. Simo J.C., and Pister K.S. Remarks on rate constitutive equations for finite deformation problems: Computational implications. Comput. Methods Appl. Mech. Engrg. 46 (1984) 201-215
233. Simo J.C., Posbergh T.A., and Marsden J.E. Stability of relative equilibria II: Three-dimensional elasticity. Arch. Rational Mech. Anal. 115 (1991) 61-100
234. Simo J.C., and Rifai M.S. A class of mixed assumed strain methods and the method of incompatible nodes. Internat. J. Numer. Methods Engrg. 29 (1990) 1595-1638
235. Simo J.C., and Tarnow N. Conserving algorithms for nonlinear elastodynamics: The energy-momentum method. Z. Angew. Math. Mech. 43 (1992) 757-792
236. Simo J.C., Tarnow N., and Wong K. Exact energy-momentum conserving algorithms and symplectic schemes for nonlinear dynamics. Comput. Methods Appl. Mech. Engrg. 100 (1992) 63-116
237. Simo J.C., and Taylor R.L. Consistent tangent operators for rate independent elasto-plasticity. Comput. Methods Appl. Mech. Engrg. 48 (1985) 101-118
238. Simo J.C., and Taylor R.L. A return mapping algorithm for plane stress elastoplasticity. Internat. J. Numer. Methods Engrg. 22 3 (1986) 649-670
239. Simo J.C., and Taylor R.L. Quasi-incompressible finite elasticity in principal stretches. Continuum basis and numerical algorithms. Comput. Methods Appl. Mech. Engrg. 85 (1991) 273-310
240. Simo J.C., Taylor R.L., and Pister K.S. Variational and projection methods for the volume constraint in finite deformation elastoplasticity. Comput. Methods Appl. Mech. Engrg. 51 (1985) 177-208
241. Sokolnikoff I.S. Mathematical Theory of Elasticity. 2nd edition (1956), McGraw-Hill, Berlin
242. Strang G. Approximating semigroups and the consistency of difference schemes. Proc. Amer. Math. Soc. 20 (1969) 1-7
243. Strang G. Introduction to Applied Mathematics (1986), Wellesley-Cambridge Press, New York
244. Strang G., and Fix G.J. Analysis of Finite Element Methods (1973), Prentice-Hall, Wellesley, MA
245. Strang G., Matthies H., and Temam R. Mathematical and computational methods in plasticity. In: Nemat-Nasser S. (Ed). Variational Methods in the Mechanics of Solids (1980), Pergamon, Englewood Cliffs, NJ
246. Stuart A., and Humphries A.R. Model problems in numerical stability theory of initial boundary value problems. SIAM Rev. 36 (1993) 222-257
247. Suquet P. Sur les el'quations de la plasticité. Ann. Fac. Sci. Toulouse 1 (1979) 77-87
248. Suquet P.M. Sur les equations de la plasticite: Existence et regularite des solutions. J. Mecanique 3 (1981) 39
249. Sussman T., and Bathe K.J. A finite element formulation for nonlinear incompressible elastic and inelastic analysis. Comput. & Structures 26 1/2 (1987) 109-357
250. Taylor G.I. Analysis of plastic strain in a cubic crystal. In: Lessels J.M. (Ed). Stephen Timoshenko 60th Anniversary Volume (1938), Macmillan, Oxford
251. Taylor G.I., and Elam C.F. Bakerian lecture: The distortion of an aluminum crystal during a tensile test. Proc. Roy. Soc. London A102 (1923) 643-667
252. Taylor G.I., and Elam C.F. The plastic extension and fracture of aluminum crystals. Proc. Roy. Soc. London A108 (1925) 28-51
253. Taylor G.I., and Quinney M.A. The latent energy remaining in a metal after cold working. Proc. Roy. Soc. London A143 (1933) 307
254. Taylor L.M., and Becker E.B. Some computational aspects of large deformation, rate-dependent plasticity problems. Comput. Methods Appl. Mech. Engrg. 41 3 (1983) 251-278
255. Taylor R.L., Beresford P.J., and Wilson E.L. A non-conforming element for stress analysis. Internat. J. Numer. Methods Engrg. 10 6 (1976) 1211-1219
256. Taylor R.L., Pister K.S., and Herrmann L.R. A variational principle for incompressible and nearly-incompressible elasticity. Internat. J. Solids Structures 4 (1968) 875-883
257. Taylor R.L., Simo J.C., Zienkiewicz O.C., and Chan A.C. The patch test: A condition for assessing finite element convergence. Internat. J. Numer. Methods Engrg. 22 (1985) 39-62
258. (Translation of 1983 French original edition). Temam R. Mathematical Problems in Plasticity (1985), Gauthier-Villars, New York
259. Temam R. Navier-Stokes Equations. Theory and Numerical Analysis. 3rd edition (1984), North-Holland, Paris
260. Temam R. Infinite-Dimensional Dynamical Systems in Mechanics and Physics. Applied Mathematical Sciences 68 (1988), Springer, Amsterdam
261. Temam R., and Strang G. Functions of bounded deformation. Arch. Rat. Mech. Anal. 75 (1980) 7-21
262. Thorpe J.A. Elementary Topics in Differential Geometry (1979), Springer, Berlin
263. -1/2 and more general isotropic tensor functions of C. J. Elasticity 15 (1985) 319-323
264. Truesdell C., and Noll W. The nonlinear field theories. Handbuch der Physik III/3 (1965), Springer, Berlin
265. Truesdell C., and Toupin R.A. The classical field theories. Handbbuch der Physik III/1 (1960), Springer, Berlin
266. Tsai S.W., and Wu E.M. A general theory of strength for anisotropic materials. J. Composite Mater. 5 (1971) 58
267. Tvergaard V., Needleman A., and Lo K.K. Flow localization in the plane strain tensile test. J. Mech. Phys. Solids 29 (1981) 115-142
268. Valent T. Boundary Value Problems in Finite Elasticity. Springer Tracts in Natural Philosophy 31 (1988), Springer, Berlin
269. Voce E. Metalurgica 51 (1955) 219
270. Von Mises R. Z. Angew. Math. Mech. 5 (1925) 147
271. Wanner G. A short proof of nonlinear A-stability. BIT 16 (1976) 226-227
272. Weber G., and Anand L. Finite deformation constitutive equations and time integration procedure for isotropic hyperelastic-viscoelastic solids. Comput. Methods Appl. Mech. Engrg. 79 (1990) 173-202
273. Wilkins M.L. Calculation of elastic-plastic flow. In: Alder B., et al. (Ed). Methods of Computational Physics 3 (1964), Academic Press, New York
274. Wood W.L. Practical Time Stepping Schemes (1990), Oxford University Press, New York
275. Wriggers P., Miehe C., Kleiber M., and Simo J.C. On the coupled thermomechanical treatment of necking problems via finite element methods. Internat. J. Numer. Methods Engrg. 33 (1992) 869-883
276. Yanenko N.N. The Method of Fractional Steps (1971), Springer, Clarendon
277. Yoder P.J., and Whirley R.L. On the numerical implementation of elastoplastic models. J. Appl. Mech. 51 2 (1984) 283-287
278. Zaremba S. Sur une forme perfectionée de la théorie de la relaxation. Bul. Int. Acad. Sci. Cracovie 8 (1903) 594-616
279. Zdebel U., and Lehmann T. Some theoretical considerations and experimental investigations on a constitutive law in thermoplasticity. Internat. J. Plasticity 3 (1987) 369-389
280. Ziegler H. A modification of Prager's hardening rule. Quart. Appl. Math. 17 (1959) 55-65
281. Zienkiewicz O.C. The Finite Element Method. 3rd edition (1977), McGraw-Hill, New York
282. Zienkiewicz O.C., and Cormeau I.C. Viscoplasticity-plasticity and creep in elastic solids-a unified numerical solution approach. Internat. J. Numer. Methods Engrg. 8 (1974) 821-845
283. Zienkiewicz O.C., Paul D.K., and Chan A.H. Unconditionally stable staggered solution procedure for soil-pore fluid interaction problems. Internat. J. Numer. Methods Engrg. 26 (1988) 1039-1055
284. Zienkiewicz O.C., and Taylor R.L. The Finite Element Method I (1989), McGraw-Hill, London
285. Zienkiewicz O.C., Taylor R.L., and Too J.M. Reduced integration technique in general analysis of plates and shells. Internat. J. Numer. Methods Engrg. 3 (1971) 275-290