Computational Methods for Plasticity: Theory and Applications

Computational Methods for Plasticity: Theory and Applications

Volumn , Issue , 2008, Pages 1-791

  De Souza Neto, E A ^a   Peric D ^a   Owen, D R J ^a  

^a SWANSEA UNIVERSITY   (United Kingdom)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 84871620786     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1002/9780470694626     Document Type: Book

References (358)

1. Alfano, G., de Angelis F. and Rosati, L. 2001. General Solution Procedures in Elasto/Viscoplasticity. Comp. Meth. Appl. Mech. Engng, 190, 5123-5147.
2. Anderson, H. 2003. An Implicit Formulation of the Bodner-Partom Constitutive Equations. Comp. Struct, 81, 1405-1414.
3. ANSI. 1978. American National Standard Programming Language FORTRAN. New York.
4. Aravas, N. 1987. On the Numerical Integration of a Class of Pressure-Dependent Plasticity Models. Int. J. Num. Meth. Engng, 24, 1395-1416.
5. Argyris, J.H. and Kleiber, M. 1977. Incremental Formulation in Nonlinear Mechanics and Large Strain Elasto-plasticity-Natural Approach. Part I. Comp. Meth. Appl. Mech. Engng, 11, 215-247.
6. Argyris, J.H. and Symeonidis, Sp. 1981. Nonlinear Finite Element Analysis of Elastic Systems Under Nonconservative Loading-Natural Formulation. Part I. Quasistatic Problems. Comp. Meth. Appl. Mech. Engng, 26, 75-123.
7. Argyris, J.H., Doltsinis, J.St. and Kleiber, M. 1978. Incremental Formulation in Nonlinear Mechanics and Large Strain Elasto-plasticity-Natural Approach. Part II. Comp. Meth. Appl. Mech. Engng, 14, 259-294.
8. Armero, F. and Oller, S. 2000. A General Framework for Continuum Damage Models. I. Infinitesimal Plastic Damage Models in Stress Space. Int. J. Solids Structs, 37, 7409-7436.
9. Armero, F. and Pérez-Foguet, A. 2002. On the Formulation of Closest-Point Projection Algorithms in Elastoplasticity-Part I: The Variational Structure. Int. J. Numer. Meth. Engng, 53, 297-329.
10. Armstrong, P.J. and Frederick, C.O. 1966. A Mathematical Representation of the Multiaxial Bauschinger Effect. CEGB: Report RD/B/N 731.
11. Arridge, R.G.C. 1985. An Introduction to Polymer Mechanics. London: Taylor and Francis.
12. Asaro, R.J. 1983. Micromechanics of Crystals and Polycrystals. Adv. Appl. Mech., 23, 1-115.
13. Asaro, R.J. and Needleman, A. 1985. Texture Development and Strain Hardening in Rate Dependent Polycrystals. Acta Metall., 33 (6), 923-953.
14. Ascher, U.M. and Petzold, L.R. 1998. Computer Methods for Ordinary Differential Equations and Differential-Algebraic Equations. Philadelphia: SIAM.
15. Atluri, S.N. 1984. On Constitutive Relations at Finite Strains: Hypo-Elasticity and Elasto-Plasticity with Isotropic or Kinematic Hardening. Comp. Meth. Appl. Mech. Engng, 43, 137-171.
16. Auricchio, F., Beirão da Veiga, L., Lovadina, C. and Reali, A. 2005. A Stability Study of Some Mixed Finite Elements for Large Deformation Elasticity Problems. Comp. Meth. Appl. Mech. Engng, 194, 1075-1092.
17. Barlat, F. and Lian, J. 1989. Plastic Behavior and Stretchability of Sheet Metals. Part I: A Yield Function for Orthotropic Sheets Under Plane Stress Condition. Int. J. Plast., 5, 51-66.
18. Basista, M., Krajčinović, D. and Šumarac, D. 1992. Micromechanics, Phenomenology and Statistics of Brittle Deformation. Pages 1479-1490 of: Owen, D.R.J., Oñate, E. and Hinton, E. (eds), Computational Plasticity: Fundamentals and Applications-Proceedings of the Third International Conference held in Barcelona, 6-10 April 1992. Swansea: Pineridge Press.
19. Bataille, J. and Kestin, J. 1979. Irreversible Processes and Physical Interpretation of Rational Thermodynamics. J. Non-Equilib. Thermodyn., 4, 229-258.
20. Bathe, K.-J. 1996. Finite Element Procedures. Englewood Cliffs, New Jersey: Prentice-Hall.
21. Bazaraa, M. and Shetty, C. 1979. Non-linear Programming: Theory and Applications. New York:Wiley.
22. Beatty, M.F. 1987. Topics in Finite Elasticity: Hyperelasticity of Rubber, Elastomers, and Biological Tissues-with Examples. Appl. Mech. Rev., 40, 1699-1734.
23. Belytschko, T. and Bindeman, L.P. 1991. Assumed Strain Stabilization of the 4-Node Quadrilateral with 1-Point Quadrature for Nonlinear Problems. Comp. Meth. Appl. Mech. Engng, 88, 311-340.
24. Belytschko, T. and Bindeman, L.P. 1993. Assumed Strain Stabilization of the Eight Node Hexahedral Element. Comp. Meth. Appl. Mech. Engng, 105, 225-260.
25. Belytschko, T., Liu, W.-K. and Moran, B. 2000. Nonlinear Finite Elements for Continua and Structures. Chichester: Wiley.
26. Belytschko, T., Ong, J.S.-J., Liu, W.K. and Kennedy, J.M. 1984. Hourglass Control in Linear and Nonlinear Problems. Comp. Meth. Appl. Mech. Engng, 43, 251-276.
27. Benallal, A., Billardon, R. and Doghri, I. 1988. An Integration Algorithm and the Corresponding Consistent Tangent Operator for Fully Coupled Elastoplastic and Damage Equations. Comm. Appl. Num. Meth., 4, 731-740.
28. Benallal, A., Billardon, R. and Lemaitre, J. 1991. Continuum Damage Mechanics and Local Approach to Fracture: Numerical Procedures. Comp. Meth. Appl. Mech. Engng, 92, 141-155.
29. Benallal, A., Billardon, R., Doghri, I. and Moret-Bailly, L. 1987. Crack Initiation and Propagation Analyses Taking into Account Initial Strain Hardening and Damage Fields. Pages 337-351 of: Luxmore, A.L., Owen, D.R.J., Rajapakse, Y.P.S. and Kanninen, M.F. (eds), Numerical Methods in Fracture Mechanics: Proceedings of the Fourth International Conference held in San Antonio, Texas, 23-27 March 1987. Pineridge Press.
30. Billington, E.W. and Tate, A. 1981. The Physics of Deformation and Flow. New York: McGraw-Hill.
31. Blatz, P.J. and Ko,W.L. 1962. Application of Finite Elasticity to the Deformation of Rubbery Materials. Trans. Soc. Rheol., 6, 223-251.
32. Bodner, S.R. and Partom, Y. 1975. Constitutive Equations for Elastic Viscoplastic Strain Hardening. J. Appl. Mech., 42, 385-389.
33. Boisse, Ph., Bussy, P. and Ladevèze, P. 1990. A New Approach in Non-linear Mechanics: The Large Time Increment Method. Int. J. Num. Meth. Engng, 29, 647-663.
34. Boisse, Ph., Ladevèze, P. and Rougee, P. 1989. A Large Time Increment Method for Elastoplastic Problems. Eur. J. Mech. A/Solids, 8 (4), 257-275.
35. Bonet, J. and Wood, R.D. 1997. Nonlinear Continuum Mechanics. Cambridge: Cambridge University Press.
36. Borja, R. and Wren, J.R. 1993. Discrete Micromechanics of Elastoplastic Crystals. Int. J. Num. Meth. Engng, 36, 3815-3840.
37. Boucard, P.-A., Ladevèze, P., Poss, M. and Rougée, P. 1997. A Nonincremental Approach for Large Displacement Problems. Comput. Struct., 64(1-4), 499-508.
38. Boyle, J.T. and Spence, J. 1983. Stress Analysis for Creep. London: Butterworths.
39. Brezzi, F. and Fortin, M. 1991. Mixed and Hybrid Finite Element Methods. New York: Springer-Verlag.
40. Bueche, F. 1960. Molecular Basis for the Mullins Effect. J. Appl. Poly. Sci., 4 (10), 107-114.
41. Caddemi, S. and Martin, J.B. 1991. Convergence of the Newton-Raphson Algorithm in Elastic-plastic Incremental Analysis. Int. J. Num. Meth. Engng, 31, 177-191.
42. Carlson, D.E. and Hoger, A. 1986. The Derivative of a Tensor-valued Function of a Tensor. Quart. Appl. Math., 44 (3), 409-423.
43. Cescotto, S. and Zhu, Y.Y. 1995. Modelling of Ductile Fracture Initiation During Bulk Forming. Pages 987-998 of: Owen, D.R.J., Oñate, E. and Hinton, E. (eds), Computational Plasticity: Fundamentals and Applications-Proceedings of the Fourth International Conference held in Barcelona, 3-6 April 1995. Swansea: Pineridge Press.
44. Chaboche, J.L. 1978. Description thermodynamique et phénoménologique de la viscoplasticité cyclique avec endommagement. Technical Report 1978-3. Office National d'Etudes et de Recherches Aérospatiales.
45. Chaboche, J.L. 1981. Continuous Damage Mechanics-A Tool to Describe Phenomena Before Crack Initiation. Nucl. Engng. Des., 64, 233-247.
46. Chaboche, J.L. 1984. Anisotropic Creep Damage in the Framework of Continuum Damage Mechanics. Nucl. Engng. Des., 79, 309-319.
47. Chaboche, J.L. 1988. Continuum Damage Mechanics: Part I-General Concepts and Part II-Damage Growth, Crack Initiation and Crack Growth. J. Appl. Mech., 55, 59-72.
48. Chaboche, J.L. and Cailletaud, G. 1996. Integration Methods for Complex Plastic Constitutive Equations. Comp. Meth. Appl. Mech. Engng, 133, 125-155.
49. Chadwick, P. and Ogden, R.W. 1971. A Theorem in Tensor Calculus and its Application to Isotropic Elasticity. Arch. Rat. Mech. Anal., 44, 54-68.
50. Chakrabarty, J. 1987. Theory of Plasticity. London: McGraw-Hill.
51. Chen, W-F. 1975. Limit Analysis and Soil Plasticity. New York: Elsevier.
52. Chen, W-F. 1982. Plasticity in Reinforced Concrete. McGraw-Hill.
53. Chen, W-F. and Mizuno, E. 1990. Nonlinear Analysis in Soil Mechanics. Theory and Implementation. New York: Elsevier.
54. Chorin, A.J., Hughes, T.J.R., McCracken, M.F. and Marsden, J.E. 1978. Product Formulas and Numerical Algorithms. Comm. Pure and Appl. Math., 31, 205-256.
55. Ciarlet, P.G. 1988. Mathematical Elasticity. Volume I: Three-dimensional Elasticity. Amsterdam: North-Holland.
56. Cognard, J.Y. and Ladèveze, P. 1993. A Large Time Increment Approach for Cyclic Viscoplasticity. Int. J. Plast., 9 (2), 141-157.
57. Cognard, J.Y., Ladèveze, P. and Talbot, P. 1999. A Large Time Increment Approach for Thermo-Mechanical Problems. Adv. Engng. Software, 30(9-11), 583-593.
58. Coleman, B.D. and Gurtin, M.E. 1967. Thermodynamics with Internal State Variables. J. Chem. Phys., 47 (2), 597-613.
59. Comi, C., Corigliano, A. and Maier, G. 1991. Extremum Properties of Finite-step Solutions in Elastoplasticity with Nonlinear Mixed Hardening. Int. J. Solids Struct., 27 (8), 965-981.
60. Cordebois, J.P. and Sidoroff, F. 1979. Damage Induced Elastic Anisotropy. Pages 761-774 of: Euromech 115-Villard de Lans-Juin 1979.
61. Cordebois, J.P. and Sidoroff, F. 1982. Endomagement Anisotrope en Élasticité et Plasticité. Journal de Mécanique Théorique et Appliquée, 45-60. Numéro spécial.
62. Cormeau, I.C. 1975. Numerical Stability in Quasi-Static Elasto/Visco-Plasticity. Int. J. Num. Meth. Engng, 9, 109-127.
63. Cosserrat, E. and Cosserrat, F. 1909. Théorie des corps déformables. Paris: Hermann.
64. Cox, A.D., Eason, G. and Hopkins, H.G. 1961. Axially Symmetric Plastic Deformation in Soils. Trans. R. Soc. Lond. A, 254, 1-45.
65. Crisfield, M.A. 1981. A Fast Incremental/Iterative Solution Procedure that Handles 'Snap-Through'. Comp. Structs, 13, 55-62.
66. Crisfield, M.A. 1983. An Arc-Length Method Including Line Searches and Accelerations. Int. J. Num. Meth. Engng, 19, 1269-1289.
67. Crisfield, M.A. 1987. Plasticity Computations Using the Mohr-Coulomb Yield Criterion. Engng. Comp., 4, 300-308.
68. Crisfield,M.A. 1991. Non-linear Finite Element Analysis of Solids and Structures. Volume 1: Essentials. Chichester: John Wiley & Sons.
69. Crisfield, M.A. 1997. Non-linear Finite Element Analysis of Solids and Structures. Volume 2: Advanced Topics. Chichester: John Wiley & Sons.
70. Crisfield, M.A. and Moita, G.F. 1996. A Co-rotational Formulation for 2-D Continua Including Incompatible Modes. Int. J. Numer. Meth. Engng, 39, 2619-2633.
71. Crisfield, M.A., Moita, G.F., Jelenić, G. and Lyons, L.P.R. 1995. Enhanced Lower-Order Element Formulations for Large Strains. Pages 293-320 of: Owen, D.R.J., Oñate, E. and Hinton, E. (eds), Computational Plasticity: Fundamentals and Applications-Proceedings of the Fourth International Conference held in Barcelona, 3-6 April 1995. Swansea: Pineridge Press.
72. Cuitiño, A. and Ortiz, M. 1992a. A Material-independent Method for Extending Stress Update Algorithms from Small-strain Plasticity to Finite Plasticity with Multiplicative Kinematics. Engng. Comp., 9, 437-451.
73. Cuitiño, A.M. and Ortiz, M. 1992b. Computational Modelling of Single Crystals. Modelling Simul. Mater. Sci. Engng, 1, 225-263.
74. Dafalias, Y.F. 1984. The Plastic Spin Concept and a Simple Illustration of its Role in Finite Plastic Transformations. Mech. Mater., 3, 223-233.
75. Dafalias, Y.F. 1985. The Plastic Spin. J. Appl. Mech., 52, 865-871.
76. Dashner, P.A. 1986. Invariance Considerations in Large Strain Elasto-Plasticity. J. Appl. Mech., 53, 55-60.
77. De Borst, R. 1987. Integration of Plasticity Equations for Singular Yield Functions. Comp. Structs, 26, 823-829.
78. De Borst, R. 1991. The Zero-normal-stress Condition in Plane-stress and Shell Elastoplasticity. Comm. Appl. Numer. Meth., 7, 29-33.
79. De Borst, R. and Feenstra, P.H. 1990. Studies in Anisotropic Plasticity with Reference to the Hill Criterion. Int. J. Numer. Meth. Engng, 29, 315-336.
80. De Souza Neto, E.A., Andrade Pires, F.M. and Owen, D.R.J. 2005. F-bar-based Linear Triangles and Tetrahedra for Finite Strain Analysis of Nearly Incompressible Solids. Part I: Formulation and Benchmarking. Int. J. Numer. Meth. Engng, 62 (3), 353-383.
81. De Souza Neto, E.A. and Feng, Y.T. 1999. On the Determination of the Path Direction for Arc-length Methods in the Presence of Bifurcations and 'Snap-Backs'. Comp. Meth. Appl. Mech. Engng, 179, 81-89.
82. De Souza Neto, E.A. and Perić, D. 1996. A Computational Framework for a Class of Models for Fully Coupled Elastoplastic Damage at Finite Strains with Reference to the Linearization Aspects. Comp. Meth. Appl. Mech. Engng, 130, 179-193.
83. De Souza Neto, E.A., Perić, D. and Owen, D.R.J. 1992. A Computational Model for Ductile Damage at Finite Strains. Pages 1425-1441 of: Owen, D.R.J., Oñate, E. and Hinton, E. (eds), Computational Plasticity: Fundamentals and Applications-Proceedings of the Third International Conference held in Barcelona, 6-10 April 1992. Swansea: Pineridge Press.
84. De Souza Neto, E.A., Perić, D. and Owen, D.R.J. 1993. Some Aspects of Formulation and Implementation of Ductile Damage at Finite Strains. In: Proceedings of the ACME 93 Conference: Computational Mechanics in the UK.
85. De Souza Neto, E.A., Perić, D. and Owen, D.R.J. 1994a. A Model for Elasto-plastic Damage at Finite Strains: Computational Issues and Applications. Engng. Comp., 11(3), 257-281.
86. De Souza Neto, E.A., Perić, D. and Owen, D.R.J. 1994b. A Phenomenological Three-dimensional Rateindependent Continuum Damage Model for Highly Filled Polymers: Formulation and Computational Aspects. J. Mech. Phys. Solids, 42(10), 1533-1550.
87. De Souza Neto, E.A., Perić, D. and Owen, D.R.J. 1998. Continuum Modelling and Numerical Simulation of Material Damage at Finite Strains. Arch. Comput. Meth. Engng, 5, 311-384.
88. De Souza Neto, E.A., Perić, D., Dutko, M. and Owen, D.R.J. 1996. Design of Simple Low Order Finite Elements for Large Strain Analysis of Nearly Incompressible Solids. Int. J. Solids Structs, 33, 3277-3296.
89. Desmorat, R. 2000. Dissymétrie de comportement élastique anisotrope couplé ou non à l'endomagement. C. R. Acad. Sci. Paris, Série II b, 328, 445-450.
90. Dettmer,W. and Reese, S. 2004. On the Theoretical and Numerical Modelling of Armstrong-Friederick Kinematic Hardening in the Finite Strain Regime. Comp. Meth. Appl. Mech. Engng, 192, 87-116.
91. Dienes, J.K. 1979. On the Analysis of Rotation and Stress Rates in Deforming Bodies. Acta Mech., 32, 217-232.
92. Dieter, G. 1986. Mechanical Metallurgy. McGraw-Hill.
93. Dodds, Jr., R.H. 1987. Numerical Techniques for Plasticity Computations in Finite Element Analysis. Comput. Structs, 26 (5), 767-779.
94. Doghri, I. 1995. Numerical Implementation and Analysis of a Class of Metal Plasticity Models Coupled with Ductile Damage. Int. J. Numer. Meth. Engng, 38, 3403-3431.
95. Doll, S., Hauptmann, R., Schweizerhof, K. and Freischlager, C. 2000. On Volumetric Locking of Loworder Solid and Solid-shell Elements for Finite Elastoviscoplastic Deformations and Selective Reduced Integration. Engng. Comp., 17, 874-902.
96. Drucker, D.C. and Prager, W. 1952. Soil Mechanics and Plasticity Analysis of Limit Design. Quart. J. Appl. Math., 10, 157-162.
97. Dureisseix, D., Ladevèze, P. and Schrefler, B.A. 2003. A LATIN Computational Strategy for Multiphysics Problems: Application to Poroelasticity. Int. J. Numer. Meth. Engng, 56 (10), 1489-1510.
98. Dutko, M., Perić, D. and Owen, D.R.J. 1993. Universal Anisotropic Yield Criterion Based on Superquadric Functional Representation. Part 1: Algorithmic Issues and Accuracy Analysis. Comp. Meth. Appl. Mech. Engng, 109, 73-93.
99. Duvaut, G. and Lions, J.L. 1976. Inequalities in Mechanics and Physics. Springer-Verlag: Berlin.
100. Engel, L. and Klingele, H. 1981. An Atlas of Metal Damage. Wolfe Science Books.
101. Eterovic, A.L. and Bathe, K.-J. 1990. A Hyperelastic Based Large Strain Elasto-plastic Constitutive Formulation with Combined Isotropic-kinematic Hardening Using the Logarithmic Stress and Strain Measures. Int. J. Numer. Meth. Engng, 30, 1099-1114.
102. Eve, R.A., Reddy, B.D. and Rockafellar, R.T. 1990. An Internal Variable Theory of Elastoplasticity based on the Maximum Plastic Work Inequality. Quart. Appl. Math., 48, 59-83.
103. Feijóo, R.A. and Zouain, N. 1988. Formulations in Rates and Increments for Elastic-plastic Analysis. Int. J. Numer. Meth. Engng, 26, 2031-2048.
104. Feng, Y.T., Owen, D.R.J. and Perić, D. 1997. On the Sign of the Determinant of the Structural Stiffness Matrix for Determination of Loading Increment in Arc-length Methods. Comm. Numer. Meth. Engng, 13, 47-49.
105. Feng, Y.T., Perić, D. and Owen, D.R.J. 1995. Determination of Travel Directions in Path-following Methods. Math. and Comput. Modelling, 21, 43-59.
106. Feng, Y.T., Perić, D. and Owen, D.R.J. 1996. A New Criterion for Determination of Initial Loading Parameter in Arc-length Methods. Comput. Structs, 58, 479-485.
107. Flanagan, D.P. and Taylor, L.M. 1987. An Accurate Numerical Algorithm for Stress Integration with Finite Rotations. Comp. Meth. Appl. Mech. Engng, 62, 305-320.
108. Fletcher, R. 1980. Practical Methods of Optimization. Volume 1: Unconstrained Problems, and Volume 2: Constrained Problems. New York: Wiley.
109. Fonseka, G.U. and Krajčinović, D. 1981. The Continuous Damage Theory of Brittle Materials-Part 2: Uniaxial and Plane Response Modes. J. Appl. Mech., 48, 816-824.
110. Fuschi, P., Perić, D. and Owen, D.R.J. 1992. Studies on Generalized Midpoint Integration in Rate-Independent Plasticity with Reference to Plane Stress J2-Flow Theory. Comput. Structs, 43, 1117-1133.
111. Gear, C.W. 1971. Numerical Initial Value Problems in Ordinary Differential Equations. Englewood Cliffs, New Jersey: Prentice-Hall.
112. Gelin, J.C. and Mrichcha, A. 1992. Computational Procedures for Finite Strain Elasto Plasticity with Isotropic Damage. Pages 1401-1412 of: Owen, D.R.J., Oñate, E. and Hinton, E. (eds), Computational Plasticity: Fundamentals and Applications-Proceedings of the Third International Conference held in Barcelona, 6-10 April 1992. Swansea: Pineridge Press.
113. Gethin, D.T., Lewis, R.W. and Ransing, R.S. 1998. Compaction of Powder via a Deformable Discrete Element Approach. Pages 45-50 of: Proceedings of the 1998 Powder Metallurgy World Congress and Exhibition. Shrewsbury, UK: European Powder Metallurgy Association.
114. Glaser, S. and Armero, F. 1997. On the Formulation of Enhanced Strain Finite Element Methods in Finite Deformations. Engng. Comp., 14 (7), 759-791.
115. Govindjee, S. and Simo, J. 1991. A Micro-mechanically Based Continuum Damage Model for Carbon Black-filled Rubbers Incorporating Mullins' Effect. J. Mech. Phys. Solids, 39 (1), 87-112.
116. Govindjee, S. and Simo, J.C. 1992. Mullins' Effect and the Strain Amplitude Dependence of the Storage Modulus. Int. J. Solids Structs, 20, 1737-1751.
117. Green, A.E. and Naghdi, P.M. 1965. A General Theory of an Elasto-plastic Continuum. Arch. Rat. Mech. Anal., 18, 251-281.
118. Green, A.E. and Zerna, W. 1954. Theoretical Elasticity. Oxford University Press.
119. Green, A.P. 1953. The Plastic Yielding of Notched Bars Due to Bending. Quart. J. Mech. Appl. Math., 6, 223-239.
120. Green, A.P. 1954. A Theory of the Plastic Yielding Due to Bending of Cantilevers and Fixed-ended Beams. Part I. J. Mech. Phys. Solids, 3, 1-15.
121. Gurson, A.L. 1977. Continuum Theory of Ductile Rupture by Void Nucleation and Growth-Part I: Yield Criteria and Flow Rule for Porous Media. J. Engng. Mater. Tech., 99, 2-15.
122. Gurtin, M.E. 1972. The Linear Theory of Elasticity. Pages 1-295 of: Flügge, S. and Truesdell, C. (eds), Handbuch der Physik, vol. VIa/2. Springer-Verlag.
123. Gurtin, M.E. 1981. An Introduction to Continuum Mechanics. New York: Academic Press.
124. Gurtin,M.E. and Francis, E.C. 1981. Simple Rate-Independent Model for Damage. J. Spacecraft, 18 (3), 285-286.
125. Gurtin, M.E. and Martins, L.C. 1976. Cauchy's Theorem in Classical Physics. Arch. Rat. Mech. Anal., 60 (4), 305-324.
126. Haftka, R.T., Gürdal, Z. and Kamat, M.P. 1990. Elements of Structural Optimization. 2nd edn. Kluwer Academic Publishers.
127. Halphen, B. and Nguyen, Q.S. 1975. Sue les matériaux Standards généralisés. J. de Mécanique, 14, 39-63.
128. Han, W. and Reddy, B.D. 1999. Plasticity: Mathematical Theory and Numerical Analysis. Berlin: Springer-Verlag.
129. Hancock, J.W. and Mackenzie, A.C. 1976. On the Mechanism of Ductile Fracture in High-strength Steels Subjected to Multi-axial Stress-states. J. Mech. Phys. Solids, 24, 147-169.
130. Havner, K.S. 1992. Finite Plastic Deformation of Crystalline Solids. Cambridge: Cambridge University Press.
131. Hencky, H. 1933. The Elastic Behavior of Vulcanized Rubber. J. Appl. Mech., 1, 45-53.
132. Hibbitt, H.D., Marcal, P.V. and Rice, J.R. 1970. A Finite Element Formulation for Problems of Large Strain and Large Displacement. Int. J. Solids Structs, 6, 1069-1086.
133. Hill, R. 1948. A Theory of the Yielding and Plastic Flow in Anisotropic Metals. Proc. Roy. Soc. A, 193, 281-297.
134. Hill, R. 1950. The Mathematical Theory of Plasticity. London: Oxford University Press.
135. Hill, R. 1958. A General Theory of Uniqueness and Stability in Elastic-plastic Solids. J. Mech. Phys. Solids, 6, 236-249.
136. Hill, R. 1978. Aspects of Invariance in Solid Mechanics. Adv. Appl. Mech., 18, 1-75.
137. Hinton, E. and Owen, D.R.J. 1977. Finite Element Programming. New York: Academic Press.
138. Hirsch, M.W. and Smale, S. 1974. Differential Equations, Dynamical Systems, and Linear Algebra. New York: Academic Press.
139. Hoffman, O. 1967. The Brittle Strength of Orthotropic Materials. J. Composite Mater., 1, 200-206.
140. Holzapfel, G.A. 2000. Nonlinear Solid Mechanics. A Continuum Approach for Engineering. London: John Wiley & Sons.
141. Horii, H. and Nemat-Nasser, S. 1983. Overall Moduli of Solids with Microcracks: Load Induced Anisotropy. J. Mech. Phys. Solids, 31 (2), 155-171.
142. Huerta, A., Pérez-Foguet, A. and Rodrígues-Ferran, A. 1999. Consistent Tangent Matrices for Complex Problems: Substepping Schemes and Numerical Differentiation. In: Wunderlich, W. (ed), Proceedings of the ECCM'99-European Conference on Computational Mechanics, Munich 1999.
143. Hughes, T.J., Taylor, R.L. and Sackman, J.L. 1975. Finite Element Formulation and Solution of Contactimpact Problems in Continuum Mechanics-III. Technical Report UC SESM75-7. Department of Civil Engineering, University of California, Berkeley.
144. Hughes, T.J.R. 1980. Generalization of Selective Integration Procedures to Anisotropic and Nonlinear Media. Int. J. Num. Meth. Engng, 15, 1413-1418.
145. Hughes, T.J.R. 1984. Numerical Implementation of Constitutive Models: Rate-independent Deviatoric Plasticity. Pages 29-63 of: Nemat-Nasser et al. (Ed.), Theoretical Foundations for Large-scale Computations for Nonlinear Material Behavior. Dordrecht, The Netherlands: Martinus Nijhoff.
146. Hughes, T.J.R. 1987. The Finite Element Method. Linear Static and Dynamic Finite Element Analysis. Englewood Cliffs, New Jersey: Prentice-Hall.
147. Hughes, T.J.R. and Pister, K. 1978. Consistent Linearization in Mechanics of Solids and Structures. Comp. Structs, 8, 391-397.
148. Hughes, T.J.R. and Taylor, R.L. 1978. Unconditionally Stable Algorithms for Quasi-static Elasto/Viscoplastic Finite Element Analysis. Comput. Structs, 8, 169-173.
149. Hughes, T.J.R. and Winget, J. 1980. Finite Rotation Effects in Numerical Integration of Rate Constitutive Equations Arising in Large-deformation Analysis. Int. J. Numer. Meth. Engng, 15, 1862-1867.
150. Ibrahimbegović, A. 1994. Finite Elastoplastic Deformations of Space-Curved Membranes. Comp.Meth. Appl. Mech. Engng, 119, 371-394.
151. Irons, B.M. 1970. A Frontal Solution Program for Finite Element Analysis. Int. J. Numer. Meth. Engng, 2, 5-32.
152. Janson, J. 1978. A Continuous Damage Approach to the Fatigue Process. Engng. Fract. Mech., 10, 651-657.
153. Jetteur, Ph. 1986. Implicit Integration Algorithm for Elastoplasticity in Plane Stress Analysis. Engng. Comp., 3, 251-253.
154. Jirásek, M. and Bažant, Z.P. 2002. Inelastic Analysis of Structures. Chichester: Wiley.
155. Johnson, G. and Bammann, D.J. 1984. A Discussion of Stress Rates in Finite Deformation Problems. Int. J. Solids Structs, 20, 725-737.
156. Kachanov, L.M. 1958. Time of the Rupture Process under Creep Condition. Izv. Akad. Nauk. SSSR, Otd. Tekhn. Nauk., 8, 26-31.
157. Kachanov, L.M. 1977. Creep and Rupture under Complex Loading. Problemi Prochnosti, 6.
158. Kestin, J. and Bataille, J. 1977. Irreversible Thermodynamics of Continua and Internal Variables. Pages 39-67 of: Proceedings of the International Symposium on Continuum Models of Discrete Systems. University of Waterloo Press.
159. Kocks, U.F. 1970. The Relation Between Polycrystal Deformation and Single-crystal Deformation. Metall. Trans., 1, 1121-1143.
160. Koh, C.G., Owen, D.R.J. and Perić, D. 1995. Explicit Dynamic Analysis of Elasto-plastic Laminated Composite Shells: Implementation of Non-iterative Stress Update Schemes for the Hoffman Yield Criterion. Comput. Mech., 16, 307-314.
161. Koiter, W.T. 1953. Stress-strain Relations, Uniqueness and Variational Theorems for Elasto-plastic Materials with Singular Yield Surface. Quart. Appl. Math., 11, 350-354.
162. Kojić, M. and Bathe, K.-J. 1987. Studies of Finite Element Procedures-Stress Solution of a Closed Elastic Strain Path with Stretching and Shearing Using the Updated Lagrangian Jaumann Formulation. Comp. Structs, 26, 175-179.
163. Kojić, M. and Bathe, K.J. 1987. The 'Effective-stress-function' for Thermo-elasto-plasticity and Creep. Int. J. Numer. Meth. Engng, 24, 1509-1532.
164. Korelc, J. and Wriggers, P. 1996. Consistent Gradient Formulation for a Stable Enhanced Strain Method for Large Deformations. Engng. Comp., 13 (1), 103-123.
165. Krajčinović, D. 1996. Damage Mechanics. Amsterdam: North-Holland.
166. Krajčinović, D. 1983. Constitutive Equations for Damaging Materials. J. Appl. Mech., 50, 355-360.
167. Krajčinović, D. 1985. Continuous Damage Mechanics Revisited: Basic Concepts and Definitions. J. Appl. Mech., 52, 829-834.
168. Krajčinović, D. and Fonseka, G.U. 1981. The Continuous Damage Theory of Brittle Materials-Part 1: General Theory. J. Appl. Mech., 48, 809-815.
169. Krieg, R.D. and Krieg, D.B. 1977. Accuracies of Numerical Solution Methods for the Elastic-perfectly Plastic Model. J. Pressure Vessel Tech., 99, 510-515.
170. Ladèveze, P. 1983. On an Anisotropic Damage Theory. Pages 355-363 of: Boehler, J.P. (ed), Proc. CNRS Int. Coll. 351-Failure Criteria of Structured Media. Villars-de-Lans.
171. Ladevèze, P. 1984. Sur une famille d'algorithmes en méchanique des structures. Comptes-Rendus de l'Academie des Sciences (Paris), Sér. II, 300 (2), 41-44.
172. Ladevèze, P. 1989. La méthode à grand incrément de temps pour l'analyse de structures à comportement nonlinéaire décrit par variable internes. Comptes Rendus de l'Academie des Sciences (Paris), Sér. II, 309 (11), 1095-1099.
173. Ladevèze, P. 1999. Nonlinear Computational Structural Mechanics-New Approaches and Non-Incremental Methods of Calculation. Springer.
174. Ladevèze, P. and Lemaitre, J. 1984. Damage Effective Stress in Quasi Unilateral Conditions. In: 16th Int. Congress Theor. Appl. Mech.
175. Ladevèze, P. and Perego, U. 2000. Duality Preserving Discetization of the Large Time Increment Method. Comp. Meth. Appl. Mech. Engng, 189 (1), 205-232.
176. Leckie, F.A. and Hayhurst, D.R. 1974. Creep Rupture of Structures. Proc. Roy. Soc. Lond. A, 340, 323-347.
177. Leckie, F.A. and Onat, E.T. 1981. Tensorial Nature of Damage Measuring Internal Variables. Pages 140-155 of: Proceedings of the IUTAM Symposium on Physical Nonlinearities in Structures. Springer.
178. Lee, E.H. 1969. Elastic-plastic Deformation at Finite Strains. J. Appl. Mech., 36, 1-6.
179. Lee, E.H. and Liu, D.T. 1967. Finite Strain Elastic-plastic Theory with Application to Plane-wave Analysis. J. Appl. Phys., 38, 19-27.
180. Lege, D.J., Barlat, F. and Brem, J.C. 1989. Characterization and Modeling of the Mechanical Behaviour and Formability of a 2008-T4 Sheet Sample. Int. J. Mech. Sci., 31 (7), 549-563.
181. Lemaitre, J. 1983. A Three-dimensional Ductile Damage Model Applied to Deep-drawing Forming Limits. Pages 1047-1053 of: ICM 4 Stockholm, vol. 2.
182. Lemaitre, J. 1985a. A Continuous DamageMechanics Model for Ductile Fracture. J. Engng. Mat. Tech., 107, 83-89.
183. Lemaitre, J. 1985b. Coupled Elasto-plasticity and Damage Constitutive Equations. Comp. Meth. Appl. Mech. Engng, 51, 31-49.
184. Lemaitre, J. 1987. Formulation and Identification of Damage Kinetic Constitutive Equations. Pages 37-89 of: Krajčinović, D. and Lemaitre, J. (eds), Continuum Damage Mechanics: Theory and Applications. Springer-Verlag.
185. Lemaitre, J. 1996. A Course on Damage Mechanics. 2nd edn. Springer.
186. Lemaitre, J. and Chaboche, J.L. 1990. Mechanics of Solid Materials. Cambridge University Press.
187. Lemaitre, J. and Dufailly, J. 1987. Damage Measurements. Engng. Fract. Mech., 28 (8), 643-661.
188. Lemaitre, J., Desmorat, R. and Sauzay, M. 2000. Anisotropic Damage Law of Evolution. Eur. J. Mech. A/Solids, 19, 187-208.
189. Li, X. 1995. Large Strain Constitutive Modelling and Computation for Isotropic, Creep Elastoplastic Damage Solids. Int. J. Numer. Meth. Engng, 38, 841-860.
190. Lion, A. 2000. Constitutive Modelling in Finite Thermoviscoplasticity: A Physical Approach Based on Nonlinear Rheological Models. Int. J. Plast., 16, 469-494.
191. Lubarda, V.A. and Lee, E.H. 1981. A Correct Definition of Elastic and Plastic Deformation and its Computational Significance. J. Appl. Mech., 48, 35-40.
192. Lubliner, J. 1990. Plasticity Theory. New York: Macmillan.
193. Luenberger, D.G. 1973. Introduction to Linear and Nonlinear Programming. Reading, Massachusetts: Addison-Wesley.
194. Maier, G. 1970. A Matrix Structural Theory of Piece-wise Linear Plasticity with Interacting Yield Planes. Meccanica, 6, 55-66.
195. Mandel, J. 1973. Equations constitutives et directeurs dans les milieux plastiques et viscoplastiques. Int. J. Solids Structs, 9, 725-740.
196. Marques, J.M.M.C. 1984. Stress Computation is Elastoplasticity. Engng. Comp., 1, 42-51.
197. Marques, J.M.M.C. and Owen, D.R.J. 1983. Strain Hardening Representation for Implicit Quasistatic Elasto-viscoplastic Algorithms. Comput. Structs, 17, 301-304.
198. Marquis, D. and Lemaitre, J. 1988. Constitutive Equations for the Coupling Between Elasto-plasticity Damage and Ageing. Rev. Phys. Applic, 23, 615-624.
199. Marsden, J.E. and Hughes, T.J.R. 1983. Mathematical Foundations of Elasticity. Englewood Cliffs, New Jersey: Prentice-Hall.
200. Martin, J.B. 1975. Plasticity: Fundamentals and General Results. Cambridge: MIT Press.
201. Martin, J.B., Reddy, B.D. and Griffin, T.B. 1987. Applications of Mathematical Programming Concepts to Incremental Elastic-plastic Analysis. Engng. Structs, 9, 171-176.
202. Matthies, H. 1979. Existence Theorems in Thermo-plasticity. J. Mécanique, 18 (4), 695-712.
203. Matthies, H. and Strang, G. 1979. The Solution of Nonlinear Finite Element Equations. Int. J. Numer. Meth. Engng, 14, 1613-1626.
204. McMeeking, R.M. and Rice, J.R. 1975. Finite-element Formulations for Problems of Large Elasticplastic Deformation. Int. J. Solids Structs, 11, 601-616.
205. Meschke, G. and Liu, W.N. 1999. A Re-formulation of the Exponential Algorithm for Finite Strain Plasticity in Terms of Cauchy Stresses. Comp. Meth. Appl. Mech. Engng, 173, 167-187.
206. Miehe, C. 1993. Computation of Isotropic Tensor Functions. Comm. Numer. Meth. Engng, 9, 889-896.
207. Miehe, C. 1995. Discontinuous and Continuous Damage Evolution in Ogden-type large-strain elastic materials. Eur. J. Mech. A/Solids, 14 (5), 697-720.
208. Miehe, C. 1996a. Exponential Map Algorithm for Stress Updates in Anisotropic Multiplicative Elastoplasticity for Single Crystals. Int. J. Numer. Meth. Engng, 39, 3367-3390.
209. Miehe, C. 1996b. Multisurface Thermoplasticity for Single Crystals at Large Strains in Terms of Eulerian Vector Updates. Int. J. Solids Structs, 33, 3103-3130.
210. Miehe, C. 1998a. Comparison of Two Algorithms for the Computation of Fourth-order Isotropic Tensor Functions. Comp. Structs, 66, 37-43.
211. Miehe, C. 1998b. A Theoretical and Computational Model for Isotropic Elastoplastic Stress Analysis in Shells at Large Strains. Comp. Meth. Appl. Mech. Engng, 155, 193-233.
212. Miehe, C. and Keck, J. 2000. Superimposed Finite Elastic-viscoelastic-plastoelastic Stress Response with Damage in Filled Rubbery Polymers. Experiments, Modelling and Algorithmic Implementation. J. Mech. Phys. Solids, 48, 323-365.
213. Miehe, C., Apel, N. and Lambrecht, M. 2002a. Anisotropic Additive Plasticity in the Logarithmic Strain Space: Modular Kinematic Formulation and Implementation based on Incremental Minimization Principles for Standard Materials. Comp. Meth. Appl. Mech. Engng, 191, 5383-5425.
214. Miehe, C., Shotte, J. and Lambrecht, M. 2002b. Homogenization of Inelastic Solid Materials at Finite Strains Based on Incremental Minimization Principles. Application to the Texture Analysis of Polycrystals. J. Mech. Phys. Solids, 50(10), 2123-2167.
215. Millard, A. 1995. Numerical Algorithms for Plane Stress Elastoplasticity: Review and Recommendation. Pages 237-247 of: Owen, D.R.J., Oñate, E. and Hinton, E. (eds), Computational Plasticity: Fundamentals and Applications-Proceedings of the Fourth International Conference held in Barcelona, 3-6 April 1995. Swansea: Pineridge Press.
216. Mitchell, G.P. 1990. Topics in the Numerical Analysis of Inelastic Solids. PhD thesis, Department of Civil Engineering, University College of Swansea.
217. Moran, B., Ortiz,M. and Shih, F. 1990. Formulation of Implicit Finite Element Methods for Multiplicative Finite Deformation Plasticity. Int. J. Numer. Meth. Engng, 29, 483-514.
218. Moss, W.C. 1984. On Instabilities in Large Deformation Simple Shear Loading. Comp. Meth. Appl. Mech. Engng, 46, 329-338.
219. Mróz, Z. 1967. On the Description of AnisotropicWork Hardening. J. Mech. Phys. Solids, 15, 163-175.
220. Muir Wood, D. 1990. Soil Behaviour and Critical State Soil Mechanics. Cambridge: Cambridge University Press.
221. Mullins, L. 1969. Softening of Rubber by Deformation. Rubber Chemistry and Technology, 42, 339-351.
222. Murakami, S. 1988. Mechanical Modeling of Material Damage. J. Appl. Mech., 55, 280-286.
223. Murakami, S. and Ohno, N. 1981. A Continuum Theory of Creep and Creep Damage. Pages 422-443 of: Ponter, A.R.S. (ed), Proceedings of the IUTAM Symposium on Creep in Structures, Leicester, 1980. Berlin: Springer.
224. Nagtegaal, J.C. 1982. On the Implementation of Inelastic Constitutive Equations with Special Reference to Large Deformation Problems. Comp. Meth. Appl. Mech. Engng, 33, 469-484.
225. Nagtegaal, J.C. and de Jong, J.E. 1981. Some Computational Aspects of Elastic-plastic Large Strain Analysis. Int. J. Numer. Meth. Engng, 17, 15-41.
226. Nagtegaal, J.C. and de Jong, J.E. 1982. Some Aspects of Non-isotropic Work-hardening in Finite Strain Plasticity. Pages 65-102 of: Lee, E.H. and Mallet, R.L. (eds), Plasticity of Metals at Finite Strain: Theory, Experiment and Computation. Division of Applied Mechanics, Stanford University and Department of Engineering & Mechanics, Rensselaer Polytechnic Institute.
227. Nagtegaal, J.C., Parks, D.M. and Rice, J.M. 1974. On Numerically Accurate Finite Element Solutions in the Fully Plastic Range. Comp. Meth. Appl. Mech. Engng, 4, 153-177.
228. Nayak, G.C. and Zienkiewicz, O.C. 1972. Elastoplastic Stress Analysis: A Generalisation for Various Constitutive Laws including Strain Softening. Int. J. Numer. Meth. Engng, 5, 113-135.
229. Naylor, D.J., Pande, G.N., Simpson, B. and Tabb, R. 1981. Finite Elements in Geotechnical Engineering. Swansea: Pineridge Press.
230. Needleman, A. 1977. Inflation of Spherical Rubber Balloons. Int. J. Solids Structs, 13, 409-421.
231. Needleman, A., Asaro, R.J., Lemonds, J. and Peirce, D. 1985. Finite Element Analysis of Crystalline Solids. Comp. Meth. Appl. Mech. Engng, 52, 689-708.
232. Nemat-Nasser, S. 1979. Decomposition of Strain Measures and their Rates in Finite Deformation Elastoplasticity. Int. J. Solids Structs, 15, 155-166.
233. Nemat-Nasser, S. 1982. On Finite Deformation Elasto-plasticity. Int. J. Solids Structs, 18 (10), 857-872.
234. Nemat-Nasser, S. 1999. Averaging Theorems in Finite Deformation Plasticity. Mech. Mater., 31, 493-523.
235. Oñate, E., Rojek, J. and García Garino, C. 1995. NUMISTAMP: A Research Project for Assessment of Finite-element Models for Stamping Processes. J. Mater. Proc. Technol., 50, 17-38.
236. Oden, J.T. 1972. Finite Elements of Nonlinear Continua. London: McGraw-Hill.
237. Oden, J.T. 1979. Applied Functional Analysis. Englewood Cliffs, New Jersey: Prentice-Hall.
238. Ogden, R.W. 1972. Large Deformation Isotropic Elasticity-On the Correlation of Theory and Experiment for Incompressible Rubberlike Solids. Proc. R. Soc. Lond. A, 326, 565-584.
239. Ogden, R.W. 1984. Non-Linear Elastic Deformations. Chichester: Ellis Horwood.
240. Onat, E.T. 1986. Representation of Mechanical Behaviour in the Presence of Internal Damage. Engng. Fract. Mech., 25, 605-614.
241. Onat, E.T. and Leckie, F.A. 1988. Representation of Mechanical Behavior in the Presence of Changing Internal Structure. J. Appl. Mech., 55, 1-10.
242. Ortiz, M. and Martin, J.B. 1989. Symmetry-preserving Return Mapping Algorithms and Incrementally Extremal Paths: A Unification of Concepts. Int. J. Numer. Meth. Engng, 28, 1839-1853.
243. Ortiz, M. and Popov, E.P. 1985. Accuracy and Stability of Integration Algorithms for Elastoplastic Constitutive Relations. Int. J. Numer. Meth. Engng, 21, 1561-1576.
244. Ortiz, M. and Simo, J.C. 1986. An Analysis of a New Class of Integration Algorithms for Elastoplastic Constitutive Relations. Int. J. Numer. Meth. Engng, 23, 353-366.
245. Owen, D.R.J. and Hinton, E. 1980. Finite Elements in Plasticity: Theory and Practice. Swansea: Pineridge Press.
246. Owen, D.R.J., Souza Neto, E.A. de, Zhao, S.Y., Perić, D., and Loughran, J.G. 1998. Finite Element Simulation of the Rolling and Extrusion of Multi-phase Materials: Application to the Rolling of Prepared Sugar Cane. Comp. Meth. Appl. Mech. Engng, 151, 479-495.
247. Pankaj, and Bićanić, N. 1989. On Multivector Stress Returns in Mohr-Coulomb Plasticity. Pages 421-436 of: Owen, D.R.J., Hinton, E. and Oñate, E. (eds), Proceedings of the Second International Conference on Computational Plasticity:Models, Software and Applications. Swansea: Pineridge Press.
248. Papadopoulos, P. and Taylor, R.L. 1994. On the Application of Multi-step Integration Methods to Infinitesimal Elastoplasticity. Int. J. Numer. Meth. Engng, 37, 3169-3184.
249. Parisch, H. 1986. Efficient Non-linear Finite Element Shell Formulation Involving Large Strains. Engng. Comp., 3, 121-128.
250. Peirce, D. 1983. Shear Band Bifurcation in Ductile Single Crystals. J. Mech. Phys. Solids, 31, 133-153.
251. Peirce, D., Asaro, R.J. and Needleman, A. 1982. An Analysis of Nonuniform and Localized Deformation in Ductile Single Crystals. Acta Metall., 30, 1087-1119.
252. Peirce, D., Asaro, R.J. and Needleman, A. 1983. Material Rate Dependence and Localized Deformation in Crystalline Solids. Acta Metall., 31, 1951-1976.
253. Peirce, D., Shih, C.F. and Needleman, A. 1984. A Tangent Modulus Method for Rate Dependent Solids. Comput. Sructs, 18, 875-887.
254. Pérez-Foguet, A. and Armero, F. 2002. On the Formulation of Closest-point Projection Algorithms in Elastoplasticity-Part II: Globally Convergent Schemes. Int. J. Numer. Meth. Engng, 53, 331-374.
255. Perić, D. 1992. On Consistent Stress Rates in Solid Mechanics: Computational Implications. Int. J. Numer. Meth. Engng, 33, 799-817.
256. Perić, D. 1993. On a Class of Constitutive Equations in Viscoplasticity: Formulation and Computational Issues. Int. J. Numer. Meth. Engng, 36, 1365-1393.
257. Perić, D. and De Souza Neto, E.A. 1999. A New Computational Model for Tresca Plasticity at Finite Strains with an Optimal Parametrization in the Principal Space. Comp. Meth. Appl. Mech. Engng, 171, 463-489.
258. Perić, D. and Dettmer, W. 2003. A Computational Model for Generalized Inelastic Materials at Finite Strains Combining Elastic, Viscoelastic and Plastic Material Behaviour. Engng. Comput., 20, 768-787.
259. Perić, D. and Owen, D.R.J. 1991. A Model for Large Deformation of Elasto-viscoplastic Solids at Finite Strains: Computational Issues. Pages 299-312 of: Besdo, D. and Stein, E. (eds), Proceedings of the IUTAM Symposium on Finite Inelastic Deformations-Theory and Applications. Berlin: Springer.
260. Perić, D. and Owen, D.R.J. 1992. Computational Model for 3-D Contact Problems with Friction Based on the Penalty Method. Int. J. Numer. Meth. Engng, 35, 1289-1309.
261. Perić, D., Owen, D.R.J. and Honnor, M.E. 1992. A Model for Finite Strain Elasto-plasticity Based on Logarithmic Strains: Computational Issues. Comp. Meth. Appl. Mech Engng, 94, 35-61.
262. Perić, D., Yu, J. and Owen, D.R.J. 1994. On Error Estimates and Adaptivity in Elastoplastic Solids: Application to the Numerical Simulation of Strain Localization in Classical and Cosserat Continua. Int. J. Numer. Meth. Engng, 37, 1351-1379.
263. Perzyna, P. 1963. The Constitutive Equations for Rate Sensitive Plastic Materials. Quart. Appl. Math., 20, 321-332.
264. Perzyna, P. 1966. Fundamental Problems in Viscoplasticity. Advances in Applied Mechanics, vol. 9. New York: Academic Press. Pages 243-377.
265. Perzyna, P. 1971. Thermodynamic Theory of Viscoplasticity. Advances in Applied Mechanics, vol. 11. New York: Academic Press. Pages 313-354.
266. Pinsky, P.M., Ortiz, M. and Pister, K.S. 1983. Numerical Integration of Rate Constitutive Equations in Finite Deformation Analysis. Comp. Meth. Appl. Mech. Engng, 40, 137-158.
267. Pires, F.M.A., De Souza Neto, E.A. and Owen, D.R.J. 2004. On the Finite Element Prediction of Damage Growth and Fracture Initiation in Finitely Deforming Ductile Materials. Comp. Meth. Appl. Mech. Engng, 193, 5223-5256.
268. Prager, W. 1959. An Introduction to Plasticity. London: Addison-Wesley.
269. Pramono, E. and Willam, K. 1989. Implicit Integration of Composite Yield Surfaces with Corners. Engng. Comp., 6, 186-197.
270. Rabotnov, Y.N. 1963. On the Equations of State for Creep. Page 307 of: Progress in Applied Mechanics, Prager Anniversary Volume. New York: Macmillan.
271. Ramm, E. 1981. Strategies for Tracing the Nonlinear Response Near Limit Point. Pages 63-89 of: Wunderlich, W. Stein, E. and Bathe, K.-J. (eds), Nonlinear Finite Element Analysis in Structural Mechanics. Berlin: Springer-Verlag.
272. Ramm, E. and Matzenmiller, A. 1987. Computational Aspects of Elasto-plasticity in Shell Analysis. Pages 711-734 of: Owen, D.R.J., Hinton, E. and Oñate, E. (eds), Computational Plasticity: Models, Software and Applications-Proceedings of the International Conference held in Barcelona, 6-10 April 1987. Swansea: Pineridge Press.
273. Ransing, R.S., Lewis, R.W., Gethin, D.T., Crook, A.J.L. and Dutko, M. 1998. Compaction of Granular Materials using Deformable Discrete Elements. Pages 143-147 of: Huétink, J. and Baaijens, F.P.T. (eds), Proceedings of the Sixth International Conference on Numerical Methods in Industrial Forming Processes-NUMIFORM 98-Enschede, Netherlands, 22-25 June 1998-Simulation of Materials Processing: Theory, Methods and Applications. Rotterdam: Balkema.
274. Rashid, M.M. and Nemat-Nasser, S. 1995. A Constitutive Algorithm for Rate-dependent Crystal Plasticity. Comp. Meth. Appl. Mech. Engng, 94, 201-228.
275. Reddy, B.D. 1998. Introductory Functional Analysis. Springer.
276. Reddy, B.D. and Martin, J.B. 1991. Algorithms for the Solution of Internal Variable Problems in Plasticity. Comp. Meth. Appl. Mech. Engng, 93, 253-273.
277. Reddy, B.D. and Simo, J.C. 1995. Stability and Convergence of a Class of Enhanced Strain Methods. SIAM J. Num. Anal., 32 (6), 1705-1728.
278. Reese, S. and Govindjee, S. 1998. A Theory of Finite Viscoelasticity and Numerical Aspects. Int. J. Solid Structs, 35, 3455-3482.
279. Reese, S. and Wriggers, P. 2000. A Stabilization Technique to Avoid Hourglassing in Finite Elasticity. Int. J. Numer. Meth. Engng, 48, 79-109.
280. Rice, J.R. 1968. A Path Independent Integral and the Approximate Analysis of Strain Concentration by Notches and Cracks. J. Appl. Mech., 35, 379-386.
281. Rice, J.R. 1971. Inelastic Constitutive Relations for Solids: An Internal-Variable Theory and its Application to Metal Plasticity. J. Mech. Phys. Solids, 19, 433-455.
282. Rice, J.R. 1976. The Localization of Plastic Deformation. Pages 207-220 of: Koiter, W.T. (ed), Theoretical and Applied Mechanics, vol. 1. Amsterdam: North-Holland.
283. Riks, E. 1972. The Application of Newton's Method to the Problem of Elastic Stability. J. Appl. Mech., 39, 1060-1066.
284. Riks, E. 1979. An Incremental Approach to the Solution of Snapping and Buckling Problems. Int. J. Solids Structs, 15, 529-551.
285. Rockafellar, R.T. 1970. Convex Analysis. Princeton University Press.
286. Rockafellar, R.T. and Wets, R.J.-B. 1998. Variational Analysis. A Series of Comprehensive Studies in Mathematics, vol. 317. Berlin: Springer.
287. Romano, G., Rosati, L. and Marotti de Sciarra, M. 1993. Variational Principles for a Class of Finite Step Elastoplastic Problems with Non-linear Mixed Hardening. Comp. Meth. Appl. Mech. Engng, 109, 293-314.
288. Rosati, L. and Valoroso, N. 2004. A Return Map Algorithm for General Isotropic Elasto/Visco-plastic Materials in Principal Space. Int. J. Numer. Meth. Engng, 60 (2), 461-498.
289. Roscoe, K.H. and Burland, J.B. 1968. On the Generalised Stress-strain Behaviour of 'Wet' Clay. Pages 535-609 of: Heyman, J. and Leckie, F.A. (eds), Engineering Plasticity. Cambridge: Cambridge University Press.
290. Rubinstein, R. and Atluri, S.N. 1983. Objectivity of Incremental Constitutive Relations Over Finite Time Steps in Computational Finite Deformation Analysis. Comp. Meth. Appl. Mech. Engng, 36, 277-290.
291. Runesson, K., Ristinmaa, M. and Mahler, L. 1999. A Comparison of Viscoplasticity Formats and Algorithms. Mech. Cohesive-Frict. Mater., 4, 75-98.
292. Saanouni, K., Chaboche, J.L. and Lesne, P.M. 1989. Creep Crack-growth Prediction by a Non-local Damage Formulation. Pages 404-414 of: Mazars, J. and Bazant, Z.P. (eds), Cracking and Damage, Strain Localization and Size Effect. Amsterdam: Elsevier.
293. Schellekens, J.C.J. and de Borst, R. 1990. The Use of the Hoffman Yield Criterion in Finite-element Analysis of Anisotropic Composites. Comput. Structs, 37, 1087-1096.
294. Schönauer, M., De Souza Neto, E.A. and Owen, D.R.J. 1995. Hencky Tensor Based Enhanced Large Strain Element for Elasto-plastic Analysis. Pages 333-348 of: Owen, D.R.J., Oñate, E. and Hinton, E. (eds), Computational Plasticity: Fundamentals and Applications-Proceedings of the Fourth International Conference held in Barcelona, 3-6 April 1995. Swansea: Pineridge Press.
295. Schröder, J., Gruttmann, F. and Löblein, J. 2002. A Simple Orthotropic Finite Elasto-plasticity Model based on Generalized Stress-strain Measures. Comp. Mech., 30, 48-64.
296. Schweizerhof, K. and Ramm, E. 1984. Displacement Dependent Pressure Loads in Nonlinear Finite Element Analyses. Comput. Structs, 18, 1099-1114.
297. Seth, B.R. 1964. Generalized Strain Measure with Applications to Physical Problems. Pages 162-172 of: Reiner, M. and Abir, D. (eds), Second-order Effects in Elasticity, Plasticity and Fluid Dynamics. Oxford: Pergamon Press.
298. Simo, J.C. 1985. On the Computational Significance of the Intermediate Configuration and Hyperelastic Stress Relations in Finite Deformation Elastoplasticity. Mech. Mater., 4, 439-451.
299. Simo, J.C. 1987. On a Fully Three-dimensional Finite-strain Viscoelastic Damage Model: Formulation and Computational Aspects. Comp. Meth. Appl. Mech. Engng, 60, 153-173.
300. Simo, J.C. 1992. Algorithms for Static and DynamicMultiplicative Plasticity that Preserve the Classical Return Mapping Schemes of the Infinitesimal Theory. Comp. Meth. Appl. Mech. Engng, 99, 61-112.
301. Simo, J.C. 1998. Numerical Analysis and Simulation of Plasticity. Pages 183-499 of: Ciarlet, P.G. and Lions, J.L. (eds), Handbook of Numerical Analysis, Volume VI. Amsterdam: Elsevier.
302. Simo, J.C. and Armero, F. 1992. Geometrically Non-linear Enhanced Strain Mixed Methods and the Method of Incompatible Modes. Int. J. Numer. Meth. Engng, 33, 1413-1449.
303. Simo, J.C., Armero, F. and Taylor, R.L. 1993. Improved Versions of Assumed Enhanced Strain Trilinear Elements for 3D Finite Deformation Problems. Comp. Meth. Appl. Mech. Engng, 110, 359-386.
304. Simo, J.C. and Govindjee, S. 1991. Non-linear B-stability and Symmetry Preserving Return Mapping Algorithms for Plasticity and Viscoplasticity. Int. J. Numer. Meth. Engng, 31, 151-176.
305. Simo, J.C. and Hughes, T.J.R. 1986. On the Variational Foundations of Assumed Strain Methods. J. Appl. Mech., 53, 1685-1695.
306. Simo, J.C. and Hughes, T.R.J. 1987. General Return Mapping Algorithms for Rate-independent Plasticity. Pages 221-231 of: Desai, C.S. et al. (Ed.), Constitutive Laws for Engineering Materials: Theory and Applications. Elsevier.
307. Simo, J.C. and Hughes, T.J.R. 1998. Computational Inelasticity. New York: Springer-Verlag.
308. Simo, J.C. and Ju, J.W. 1987. Strain-and Stress-based Continuum Damage Models-I. Formulation and II. Computational Aspects. Int. J. Solids Structs, 23, 821-869.
309. Simo, J.C., Ju, J.-W., Pister, K.S. and Taylor, R.L. 1988a. Assessment of Cap Model: Consistent Return Algorithms and Rate-dependent Extension. ASCE J. Engng. Mech., 114(2), 191-218.
310. Simo, J.C., Kennedy, J.G. and Govindjee, S. 1988b. Non-smooth Multisurface Plasticity and Viscoplasticity. Loading/Unloading Conditions and Numerical Algorithms. Int. J. Numer. Meth. Engng, 26, 2161-2185.
311. Simo, J.C. and Meschke, G. 1993. A New Class of Algorithms for Classical Plasticity Extended to Finite Strains. Application to Geomaterials. Comp. Mech., 11, 253-278.
312. Simo, J.C. and Miehe, C. 1992. Associative Coupled Thermoplasticity at Finite Strains: Formulation, Numerical Analysis and Implementation. Comp. Meth. Appl. Mech. Engng, 98, 41-104.
313. Simo, J.C. and Ortiz, M. 1985. A Unified Approach to Finite Deformation Plasticity Based on the Use of Hyperelastic Constitutive Equations. Comp. Meth. Appl. Mech. Engng, 49, 221-245.
314. Simo, J.C. and Pister, K.S. 1984. Remarks on the Rate Constitutive Equations for Finite Deformation Problems: Computational Implications. Comp. Meth. Appl. Mech. Engng, 46, 201-215.
315. Simo, J.C. and Rifai, S. 1990. A Class of Mixed Assumed Strain Methods and the Method of Incompatible Modes. Int. J. Numer. Meth. Engng, 29, 1595-1638.
316. Simo, J.C. and Taylor, R.L. 1985. Consistent Tangent Operators for Rate-Independent Elastoplasticity. Comp. Meth. Appl. Mech. Engng, 48, 101-118.
317. Simo, J.C. and Taylor, R.L. 1986. A Return Mapping Algorithm for Plane Stress Elastoplasticity. Int. J. Numer. Meth. Engng, 22, 649-670.
318. Simo, J.C. and Taylor, R.L. 1991. Quasi-incompressible Finite Elasticity in Principal Stretches. Continuum Basis and Numerical Algorithms. Comp. Meth. Appl. Mech. Engng, 85, 273-310.
319. Simo, J.C., Taylor, R.L. and Pister, K.S. 1985. Variational and Projection Methods for the Volume Constraint in Finite Deformation Elasto-plasticity. Comp. Meth. Appl. Mech. Engng, 51, 177-208.
320. Skrzypek, J.J. 1993. Plasticity and Creep. Theory, Examples and Problems. London: CRC Press.
321. Sloan, S.W. and Booker, J.R. 1992. Integration of Tresca and Mohr-Coulomb Constitutive Relations in Plane Strain Elastoplasticity. Int. J. Numer. Meth. Engng, 33, 163-196.
322. Sowerby, R. and Chu, E. 1984. Rotations, Stress Rates and Strain Measures in Homogenous Deformation Processes. Int. J. Solids Structs, 20, 1037-1048.
323. Spencer, A.J.M. 1980. Continuum Mechanics. London: Longman.
324. Steinmann, P. and Stein, E. 1996. On the Numerical Treatment and Analysis of Finite Deformation Ductile Single Crystal Plasticity. Comp. Meth. Appl. Mech. Engng, 129, 235-254.
325. Steinmann, P., Miehe, C. and Stein, E. 1994. Comparison of Different Finite Deformation Inelastic Damage Models within Multiplicative Elastoplasticity for Ductile Metals. Comput. Mech., 13, 458-474.
326. Stern, H.J. 1967. Rubber: Natural and Synthetic. London: McLaren and Sons.
327. Suquet, P. 1981. Sur les équations de la plasticité: existence et régularité des solutions. J. Mécanique, 20, 3-40.
328. Sussman, T. and Bathe, K.-J. 1987. A Finite Element Formulation for Nonlinear Incompressible Elastic and Inelastic Analysis. Comp. Structs, 26, 357-409.
329. Taylor, R.L., Beresford, P.J. and Wilson, E.L. 1976. A Non-conforming Element for Stress Analysis. Int. J. Numer. Meth. Engng, 10, 1211-1219.
330. Toupin, R.A. 1962. Elastic Materials with Couple-Stresses. Arch. Rat. Mech. Anal., 11, 385-414.
331. Treloar, L.R.G. 1944. Stress-strain Data for Vulcanized Rubber under Various Types of Deformation. Trans. Faraday Soc., 40, 59-70.
332. Tresca, H. 1868. Mémoire sur l'écoulement des corps solides. Mém. pres. par div. sav., 18, 733-799.
333. Truesdell, C. 1969. Rational Thermodynamics. New York: McGraw-Hill.
334. Truesdell, C. and Noll, W. 1965. The Non-linear Field Theories of Mechanics. In: Flügge, S. (ed), Handbuch der Physik, vol. III/3. Springer-Verlag.
335. Tsakmakis, C. 1996a. Kinematic Hardening Rules for Finite Plasticity. Part I: A Constitutive Approach. Cont. Mech. Thermodyn., 8, 215-231.
336. Tsakmakis, C. 1996b. Kinematic Hardening Rules for Finite Plasticity. Part II: Some Examples. Cont. Mech. Thermodyn., 8, 233-246.
337. Tvergaard, V. 1981. Influence of Voids on Shear Band Instabilities under Plane Strain Conditions. Int. J. Fract., 17, 389-407.
338. Tvergaard, V. 1982a. Material Failure by Void Coalescence in Localized Shear Bands. Int. J. Solids Structs, 18, 659-672.
339. Tvergaard, V. 1982b. On Localization in Ductile Materials Containing Spherical Voids. Int. J. Fract., 18, 237-252.
340. Tvergaard, V. and Needleman, A. 1984. Analysis of the Cup-cone Fracture in a Round Tensile Bar. Acta Metall., 32, 157-169.
341. Vaz Jr., M. 1998. Computational Approaches to Simulation of Metal Cutting Processes. PhD thesis, Department of Civil Engineering, University of Wales Swansea.
342. Vaz Jr., M. and Owen, D.R.J. 2001. Aspects of Ductile Fracture and Adaptive mesh Refinement in Damaged Elasto-plastic Materials. Int. J. Numer. Meth. Engng, 50, 29-54.
343. von Mises, R. 1913. Mechanik der Festen Körper im Plastische-deformablen Zustand. Nachr. d. Gesellsch d. Wissensch. zu Göttingen, Math.-phys. Klasse.
344. Wall, W.A., Bischoff, M. and Ramm, E. 2000. A Deformation Dependent Stabilization Technique Exemplified by EAS Elements at Large Strains. Comp. Meth. Appl. Mech. Engng, 188, 859-871.
345. Wang, C.C. and Truesdell, C. 1973. Introduction to Rational Elasticity. Leyden: Noordhoff.
346. Washizu, K. 1968. Variational Methods in Elasticity and Plasticity. London: Pergamon Press.
347. Weber, G. and Anand, L. 1990. Finite Deformation Constitutive Equations and a Time Integration Procedure for Isotropic, Hyperelastic-Viscoplastic Solids. Comp. Meth. Appl. Mech. Engng, 79, 173-202.
348. Wempner, G.A. 1971. Discrete Approximations Related to the Nonlinear Theory of Solids. Int. J. Solids Structs, 7, 1581-1599.
349. Wilkins, M.L. 1964. Calculation of Elasto-plastic Flow. In: Alder, B. et al. (Ed.), Methods of Computational Physics, Vol. 3. New York: Academic Press.
350. Wolfram, S. 1991. Mathematica: A System for Doing Mathematics by Computer. New York: Addison-Wesley.
351. Wriggers, P. 2001. Nichtlineare Finite-Element-Methoden. Berlin: Springer-Verlag.
352. Wriggers, P. and Reese, S. 1996. A Note on Enhanced Strain Methods for Large Deformations. Comp. Meth. Appl. Mech. Engng, 135, 201-209.
353. Wriggers, P. and Taylor, R.L. 1990. A Fully Non-linear Axisymmetrical Membrane Element for Rubber-like Materials. Engng. Comp., 7, 303-310.
354. Zienkiewicz, O.C. and Cormeau, I.C. 1974. Visco-plasticity-Plasticity and Creep in Elastic Solids-A Unified Numerical Solution Approach. Int. J. Numer. Meth. Engng, 8, 821-845.
355. Zienkiewicz, O.C. and Taylor, R.L. 2000. The Finite Element Method. Volume II: Solid Mechanics. 5th edn. Butterworth-Heinemann.
356. Zienkiewicz, O.C., Norris, V.A., Winnicki, L.A., Naylor, D.J. and Lewis, R.W. 1978. A Unified Approach to the Soil Mechanics Problems of Offshore Foundations. In: Zienkiewicz, O.C., Lewis, R.W. and Stagg, K.G. (eds), Numerical Methods in Offshore Engineering. John Wiley and Sons.
357. Zouain, N., Borges, L.A. and Hecke, M.B. 1988. A Force Method for Elastic-plastic Analysis of Frames by Quadratic Optimization. Int. J. Solids Structs, 24, 211-221.
358. Zouain, N., Hecke, M.B. and Feijóo, R.A. 1992. Elastic-plastic Analysis with Potential Functionals Using Internal Variables. Pages 163-174 of: Owen, D.R.J., Oñate, E. and Hinton, E. (eds), Computational Plasticity: Fundamentals and Applications-Proceedings of the Third International Conference held in Barcelona, 6-10 April 1992. Swansea: Pineridge Press.