The prognostic accuracy of resonance frequency analysis in predicting failure risk of immediately restored implants

Clinical Oral Implants Research

Volumn 25, Issue 1, 2014, Pages 29-35

  Atieh, Momen A ^a   Alsabeeha, Nabeel H M ^b   Payne, Alan G T ^c   de Silva, Rohana K ^a   Schwass, Donald S ^a   Duncan, Warwick J ^a  

^a UNIVERSITY OF OTAGO   (New Zealand)

^b Ministry of Health United Arab Emirates   (United Arab Emirates)

^c Private Prosthodontist   (New Zealand)

Author keywords

Dental implants; Prognosis; ROC curve; Sensitivity and specificity

Indexed keywords

CONTROLLED CLINICAL TRIAL; CONTROLLED STUDY; DENTAL SURGERY; FEMALE; HUMAN; MALE; MANDIBLE; MIDDLE AGED; MOLAR TOOTH; PREDICTIVE VALUE; PROGNOSIS; PROSPECTIVE STUDY; SENSITIVITY AND SPECIFICITY; SIGNAL PROCESSING; STATISTICS AND NUMERICAL DATA; SURGERY; TOOTH IMPLANT; TOOTH IMPLANTATION; TRANSDUCER; VIBRATION;

DENTAL IMPLANTS, SINGLE-TOOTH; DENTAL RESTORATION FAILURE; FEMALE; HUMANS; IMMEDIATE DENTAL IMPLANT LOADING; MALE; MANDIBLE; MIDDLE AGED; MOLAR; PREDICTIVE VALUE OF TESTS; PROGNOSIS; PROSPECTIVE STUDIES; SENSITIVITY AND SPECIFICITY; SIGNAL PROCESSING, COMPUTER-ASSISTED; TRANSDUCERS; VIBRATION;

EID: 84890777442     PISSN: 09057161     EISSN: 16000501     Source Type: Journal    
DOI: 10.1111/clr.12057     Document Type: Article

References (78)

1. Abrahamsson, I., Berglundh, T., Linder, E., Lang, N.P. & Lindhe, J. (2004). Early bone formation adjacent to rough and turned endosseous implant surfaces. An experimental study in the dog. Clinical Oral Implants Research 15: 381-392.
2. Adell, R., Lekholm, U. & Branemark, P.I. (1985) Surgical procedures. In: Branemark, P.I., Zarb, G. & Albrektsson, T., eds. Tissue Integrated Prostheses. Osseointegration in Clinical Dentistry, 211-232. Chicago: Quintessence Publishing.
3. Adell, R., Lekholm, U., Rockler, B., Branemark, P.I., Lindhe, J., Eriksson, B. & Sbordone, L. (1986). Marginal tissue reactions at osseointegrated titanium fixtures (i). A 3-year longitudinal prospective study. International Journal of Oral and Maxillofacial Surgery 15: 39-52.
4. Akkocaoglu, M., Uysal, S., Tekdemir, I., Akca, K. & Cehreli, M.C. (2005). Implant design and intraosseous stability of immediately placed implants: a human cadaver study. Clinical Oral Implants Research 16: 202-209.
5. Akobeng, A.K. (2007). Understanding diagnostic tests 3: receiver operating characteristic curves. Acta Paediatrica 96: 644-647.
6. Albrektsson, T., Branemark, P.I., Hansson, H.A. & Lindstrom, J. (1981). Osseointegrated titanium implants. Requirements for ensuring a long-lasting, direct bone-to-implant anchorage in man. Acta Orthopaedica Scandinavica 52: 155-170.
7. Albrektsson, T. & Zarb, G.A. (1993). Current interpretations of the osseointegrated response: clinical significance. International Journal of Prosthodontics 6: 95-105.
8. Al-Nawas, B., Wagner, W. & Grotz, K.A. (2006). Insertion torque and resonance frequency analysis of dental implant systems in an animal model with loaded implants. International Journal of Oral & Maxillofacial Implants 21: 726-732.
9. Alsaadi, G., Quirynen, M., Michiels, K., Jacobs, R. & van Steenberghe, D. (2007). A biomechanical assessment of the relation between the oral implant stability at insertion and subjective bone quality assessment. Journal of Clinical Periodontology 34: 359-366.
10. Atieh, M.A., Alsabeeha, N.H., Duncan, W.J., de Silva, R.K., Cullinan, M.P., Schwass, D. & Payne, A.G.T. (2012b). Immediate single implant restorations in mandibular molar extraction sockets: a controlled clinical trial. Clinical Oral Implants Research. doi:10.1111/j.1600-0501.2011.02415.x.
11. Atieh, M.A., Alsabeeha, N.H. & Payne, A.G. (2012a). Can resonance frequency analysis predict failure risk of immediately loaded implants? International Journal of Prosthodontics 25: 326-339.
12. Atieh, M.A., Alsabeeha, N.H., Payne, A.G.T., Schwass, D. & Duncan, W.J. (2012c) Insertion torque of immediate wide-diameter implants: a finite element analysis. Quintessence International In press.
13. Atieh, M.A., Atieh, A.H., Payne, A.G. & Duncan, W.J. (2009a). Immediate loading with single implant crowns: a systematic review and meta-analysis. International Journal of Prosthodontics 22: 378-387.
14. Atieh, M.A., Ibrahim, H.M. & Atieh, A.H. (2010a). Platform switching for marginal bone preservation around dental implants: a systematic review and meta-analysis. Journal of Periodontology 81: 1350-1366.
15. Atieh, M.A., Payne, A.G., Duncan, W.J. & Cullinan, M.P. (2009b). Immediate restoration/loading of immediately placed single implants: is it an effective bimodal approach? Clinical Oral Implants Research 20: 645-659.
16. Atieh, M.A., Payne, A.G., Duncan, W.J., de Silva, R.K. & Cullinan, M.P. (2010b). Immediate placement or immediate restoration/loading of single implants for molar tooth replacement: a systematic review and meta-analysis. International Journal of Oral & Maxillofacial Implants 25: 401-415.
17. Atieh, M. & Shahmiri, R.A. (2011) The evaluation of optimal taper of immediately loaded wide-diameter implants: a finite element analysis. Journal of Oral Implantology. doi: 10.1563/AAID-JOI-D-11-00104.
18. Atsumi, M., Park, S.H. & Wang, H.L. (2007). Methods used to assess implant stability: current status. International Journal of Oral & Maxillofacial Implants 22: 743-754.
19. Balleri, P., Cozzolino, A., Ghelli, L., Momicchioli, G. & Varriale, A. (2002). Stability measurements of osseointegrated implants using osstell in partially edentulous jaws after 1 year of loading: a pilot study. Clinical Implant Dentistry and Related Research 4: 128-132.
20. Balshi, S.F., Allen, F.D., Wolfinger, G.J. & Balshi, T.J. (2005). A resonance frequency analysis assessment of maxillary and mandibular immediately loaded implants. International Journal of Oral & Maxillofacial Implants 20: 584-594.
21. Bardyn, T., Gedet, P., Hallermann, W. & Buchler, P. (2009). Quantifying the influence of bone density and thickness on resonance frequency analysis: an in vitro study of biomechanical test materials. International Journal of Oral & Maxillofacial Implants 24: 1006-1014.
22. Bischof, M., Nedir, R., Szmukler-Moncler, S., Bernard, J.P. & Samson, J. (2004). Implant stability measurement of delayed and immediately loaded implants during healing. Clinical Oral Implants Research 15: 529-539.
23. Bogaerde, L.V., Pedretti, G., Sennerby, L. & Meredith, N. (2010). Immediate/early function of neoss implants placed in maxillas and posterior mandibles: an 18-month prospective case series study. Clinical Implant Dentistry and Related Research 12(Suppl 1): e83-e94.
24. Bossuyt, P.M., Reitsma, J.B., Bruns, D.E., Gatsonis, C.A., Glasziou, P.P., Irwig, L.M., Lijmer, J.G., Moher, D., Rennie, D. & de Vet, H.C. (2003). Towards complete and accurate reporting of studies of diagnostic accuracy: the STARD initiative. Annals of Internal Medicine 138: 40-44.
25. Brunski, J.B. (1993). Avoid pitfalls of overloading and micromotion of intraosseous implants. Dental Implantology Update 4: 77-81.
26. Carlsson, L., Rostlund, T., Albrektsson, B. & Albrektsson, T. (1988). Removal torques for polished and rough titanium implants. International Journal of Oral & Maxillofacial Implants 3: 21-24.
27. Cornelini, R., Cangini, F., Covani, U., Barone, A. & Buser, D. (2006). Immediate loading of implants with 3-unit fixed partial dentures: a 12-month clinical study. International Journal of Oral & Maxillofacial Implants 21: 914-918.
28. da Cunha, H.A., Francischone, C.E., Filho, H.N. & de Oliveira, R.C. (2004). A comparison between cutting torque and resonance frequency in the assessment of primary stability and final torque capacity of standard and tiunite single-tooth implants under immediate loading. International Journal of Oral & Maxillofacial Implants 19: 578-585.
29. Davies, J.E. (1998). Mechanisms of endosseous integration. International Journal of Prosthodontics 11: 391-401.
30. De Smet, E., Jaecques, S., Vandamme, K., Vander Sloten, J. & Naert, I. (2005). Positive effect of early loading on implant stability in the bi-cortical guinea-pig model. Clinical Oral Implants Research 16: 402-407.
31. Deeks, J.J. & Altman, D.G. (2004). Diagnostic tests 4: likelihood ratios. British Dental Journal 329: 168-169.
32. Degidi, M., Daprile, G. & Piattelli, A. (2010). Primary stability determination by means of insertion torque and rfa in a sample of 4, 135 implants. Clinical Implant Dentistry and Related research. doi:10.1111/j.1708-8208.2010.00302.x.
33. Degidi, M., Piattelli, A., Gehrke, P. & Carinci, F. (2006). Clinical outcome of 802 immediately loaded 2-stage submerged implants with a new grit-blasted and acid-etched surface: 12-month follow-up. International Journal of Oral & Maxillofacial Implants 21: 763-768.
34. Dhert, W.J., Verheyen, C.C., Braak, L.H., de Wijn, J.R., Klein, C.P., de Groot, K. & Rozing, P.M. (1992). A finite element analysis of the push-out test: influence of test conditions. Journal of Biomedical Materials Research 26: 119-130.
35. Dos Santos, M.V., Elias, C.N. & Cavalcanti Lima, J.H. (2009). The effects of superficial roughness and design on the primary stability of dental implants. Clinical Implant Dentistry and Related Research. doi:10.1111/j.1708.8208.2009.00202.x.
36. Friberg, B., Sennerby, L., Meredith, N. & Lekholm, U. (1999). A comparison between cutting torque and resonance frequency measurements of maxillary implants. A 20-month clinical study. International Journal of Oral & Maxillofacial Surgery 28: 297-303.
37. Glauser, R., Lundgren, A.K., Gottlow, J., Sennerby, L., Portmann, M., Ruhstaller, P. & Hammerle, C.H. (2003). Immediate occlusal loading of branemark tiunite implants placed predominantly in soft bone: 1-year results of a prospective clinical study. Clinical Implant Dentistry and Related Research 5(Suppl 1): 47-56.
38. Glauser, R., Sennerby, L., Meredith, N., Ree, A., Lundgren, A., Gottlow, J. & Hammerle, C.H. (2004). Resonance frequency analysis of implants subjected to immediate or early functional occlusal loading. Successful vs. Failing implants. Clinical Oral Implants Research 15: 428-434.
39. Han, J., Lulic, M. & Lang, N.P. (2010). Factors influencing resonance frequency analysis assessed by osstell mentor during implant tissue integration: ii. Implant surface modifications and implant diameter. Clinical Oral Implants Research 21: 605-611.
40. Heo, S.J., Sennerby, L., Odersjo, M., Granstrom, G., Tjellstrom, A. & Meredith, N. (1998). Stability measurements of craniofacial implants by means of resonance frequency analysis. A clinical pilot study. The Journal of Laryngology and Otology 112: 537-542.
41. Hobkirk, J.A. & Wiskott, H.W. (2006) Biomechanical aspects of oral implants. Consensus report of working group 1. Clinical Oral Implants Research 17(Suppl 2): 52-54.
42. Huwiler, M.A., Pjetursson, B.E., Bosshardt, D.D., Salvi, G.E. & Lang, N.P. (2007). Resonance frequency analysis in relation to jawbone characteristics and during early healing of implant installation. Clinical Oral Implants Research 18: 275-280.
43. Jaeschke, R., Guyatt, G. & Sackett, D.L. (1994). Users' guides to the medical literature. Iii. How to use an article about a diagnostic test. A. Are the results of the study valid? Evidence-based medicine working group. Journal of the American Medical Association 271: 389-391.
44. Javed, F. & Romanos, G.E. (2010). The role of primary stability for successful immediate loading of dental implants. A literature review. Journal of Dentistry 38: 612-620.
45. Kim, S.G., Kim, W.K., Park, J.C. & Kim, H.J. (2002). A comparative study of osseointegration of avana implants in a demineralized freeze-dried bone alone or with platelet-rich plasma. Journal of Oral and Maxillofacial Surgery 60: 1018-1025.
46. Langer, B., Langer, L., Herrmann, I. & Jorneus, L. (1993). The wide fixture: a solution for special bone situations and a rescue for the compromised implant. Part 1. International Journal of Oral & Maxillofacial Implants 8: 400-408.
47. Ledermann, P.D. (1977). [complete denture provision of atrophic problem mandible with aid of cbs-implants]. Die Quintessenz 28: 21-26.
48. Ledermann, P. (1979) [complete denture support in edentulous problem mandibles with help from 4 titanium plasma-coated pdl screw implants]. Schweizerische Monatsschrift fur Zahnheilkunde = Revue mensuelle suisse d'odonto-stomatologie/SSO 89: 1137-1138.
49. Lekholm, U. & Zarb, G. (1985). Patient selection and preparation. In: Branemark, P.I., ed. Tissue Integrated Prostheses: Osseointegration in Clinical Dentistry199-220. Chicago: Quintessence.
50. Lindeboom, J.A., Frenken, J.W., Dubois, L., Frank, M., Abbink, I. & Kroon, F.H. (2006). Immediate loading versus immediate provisionalization of maxillary single-tooth replacements: a prospective randomized study with biocomp implants. Journal of Oral & Maxillofacial Surgery 64: 936-942.
51. Meredith, N., Alleyne, D. & Cawley, P. (1996). Quantitative determination of the stability of the implant-tissue interface using resonance frequency analysis. Clinical Oral Implants Research 7: 261-267.
52. Meredith, N., Book, K., Friberg, B., Jemt, T. & Sennerby, L. (1997). Resonance frequency measurements of implant stability in vivo. A cross-sectional and longitudinal study of resonance frequency measurements on implants in the edentulous and partially dentate maxilla. Clinical Oral Implants Research 8: 226-233.
53. Merheb, J., Van Assche, N., Coucke, W., Jacobs, R., Naert, I. & Quirynen, M. (2010). Relationship between cortical bone thickness or computerized tomography-derived bone density values and implant stability. Clinical Oral Implants Research 21: 612-617.
54. Nedir, R., Bischof, M., Szmukler-Moncler, S., Bernard, J.P. & Samson, J. (2004). Predicting osseointegration by means of implant primary stability. Clinical Oral Implants Research 15: 520-528.
55. Nkenke, E., Hahn, M., Weinzierl, K., Radespiel-Troger, M., Neukam, F.W. & Engelke, K. (2003). Implant stability and histomorphometry: a correlation study in human cadavers using stepped cylinder implants. Clinical Oral Implants Research 14: 601-609.
56. Oh, T.J., Yoon, J., Misch, C.E. & Wang, H.L. (2002). The causes of early implant bone loss: myth or science? Journal of Periodontology 73: 322-333.
57. Olive, J. & Aparicio, C. (1990). Periotest method as a measure of osseointegrated oral implant stability. International Journal of Oral & Maxillofacial Implants 5: 390-400.
58. Ostman, P.O., Hellman, M. & Sennerby, L. (2005). Direct implant loading in the edentulous maxilla using a bone density-adapted surgical protocol and primary implant stability criteria for inclusion. Clinical Implant Dentistry and Related Research 7(Suppl 1): S60-S69.
59. Ostman, P.O., Hellman, M. & Sennerby, L. (2008). Immediate occlusal loading of implants in the partially edentate mandible: a prospective 1-year radiographic and 4-year clinical study. International Journal of Oral & Maxillofacial Implants 23: 315-322.
60. Ostman, P.O., Hellman, M., Wendelhag, I. & Sennerby, L. (2006) Resonance frequency analysis measurements of implants at placement surgery. International Journal of Prosthodontics 19: 77-83; discussion 84.
61. O'Sullivan, D., Sennerby, L. & Meredith, N. (2000). Measurements comparing the initial stability of five designs of dental implants: a human cadaver study. Clinical Implant Dentistry and Related Research 2: 85-92.
62. Pilliar, R. (1991). Quantitative evaluation of the effect of movements at a porous coated implant-bone interface. In: Davies, E., ed. The Bone-Biomaterial Interface, 380-387. Toronto: University of Toronto Press.
63. Polizzi, G., Rangert, B., Lekholm, U., Gualini, F. & Lindstrom, H. (2000). Branemark system wide platform implants for single molar replacement: clinical evaluation of prospective and retrospective materials. Clinical Implant Dentistry and Related Research 2: 61-69.
64. Rao, W. & Benzi, R. (2007). Single mandibular first molar implants with flapless guided surgery and immediate function: preliminary clinical and radiographic results of a prospective study. Journal of Prosthetic Dentistry 97: S3-S14.
65. Rasmusson, L., Stegersjo, G., Kahnberg, K.E. & Sennerby, L. (1999). Implant stability measurements using resonance frequency analysis in the grafted maxilla: a cross-sectional pilot study. Clinical Implant Dentistry and Related Research 1: 70-74.
66. Renouard, F., Arnoux, J.P. & Sarment, D.P. (1999). Five-mm-diameter implants without a smooth surface collar: report on 98 consecutive placements. International Journal of Oral & Maxillofacial Implants 14: 101-107.
67. Roberts, W.E. (1988). Bone tissue interface. Journal of Dental Education 52: 804-809.
68. Sennerby, L. & Meredith, N. (1998) Resonance frequency analysis: measuring implant stability and osseointegration. Compendium of Continuing Education in Dentistry 19: 493-498, 500, 502; quiz 504.
69. Sennerby, L. & Meredith, N. (2008) Implant stability measurements using resonance frequency analysis: biological and biomechanical aspects and clinical implications. Periodontology 2000(47): 51-66.
70. Sennerby, L. & Roos, J. (1998). Surgical determinants of clinical success of osseointegrated oral implants: a review of the literature. International Journal of Prosthodontics 11: 408-420.
71. Sim, C.P. & Lang, N.P. (2010). Factors influencing resonance frequency analysis assessed by osstell mentor during implant tissue integration: I. Instrument positioning, bone structure, implant length. Clinical Oral Implants Research 21: 598-604.
72. Soballe, K., Hansen, E.S., B-Rasmussen, H., Jorgensen, P.H. & Bunger, C. (1992) Tissue ingrowth into titanium and hydroxyapatite-coated implants during stable and unstable mechanical conditions. Journal of Orthopedic Research 10: 285-299.
73. Sullivan, D.Y., Sherwood, R.L., Collins, T.A. & Krogh, P.H. (1996). The reverse-torque test: a clinical report. International Journal of Oral & Maxillofacial Implants 11: 179-185.
74. Ueda, M., Matsuki, M., Jacobsson, M. & Tjellstrom, A. (1991). Relationship between insertion torque and removal torque analyzed in fresh temporal bone. International Journal of Oral & Maxillofacial Implants 6: 442-447.
75. Valderrama, P., Oates, T.W., Jones, A.A., Simpson, J., Schoolfield, J.D. & Cochran, D.L. (2007). Evaluation of two different resonance frequency devices to detect implant stability: a clinical trial. Journal of Periodontology 78: 262-272.
76. Vandeweghe, S., Ackermann, A., Bronner, J., Hattingh, A., Tschakaloff, A. & De Bruyn, H. (2012). A retrospective multicenter study on a novo wide-body implant for posterior regions. Clinical Implant Dentistry and Related Research 14: 281-292.
77. Zix, J., Hug, S., Kessler-Liechti, G. & Mericske-Stern, R. (2008). Measurement of dental implant stability by resonance frequency analysis and damping capacity assessment: Comparison of both techniques in a clinical trial. International Journal of Oral & Maxillofacial Implants 23: 525-530.
78. Zix, J., Kessler-Liechti, G. & Mericske-Stern, R. (2005). Stability measurements of 1-stage implants in the maxilla by means of resonance frequency analysis: a pilot study. International Journal of Oral & Maxillofacial Implants 20: 747-752.