Chemical changes of heat treated pine and eucalypt wood monitored by ftir

Maderas: Ciencia y Tecnologia

Volumn 15, Issue 2, 2013, Pages 245-258

  Esteves, B ^a   Marques, A Velez ^b   Domingos, I ^a   Pereira, H ^c  

^a POLYTECHNIC INSTITUTE OF VISEU   (Portugal)

^b INSTITUTO SUPERIOR DE ENGENHARIA DE LISBOA   (Portugal)

^c INSTITUTO SUPERIOR DE AGRONOMIA   (Portugal)

Author keywords

Eucalyptus globulus; FTIR; Heat treatment; Pinus pinaster

Indexed keywords

EID: 84890043477     PISSN: 07173644     EISSN: 0718221X     Source Type: Journal    
DOI: 10.4067/S0718-221X2013005000020     Document Type: Article

References (40)

1. Bekhta, P.; Niemz, P. 2003. Effect of high temperature on the change in color, dimensional Stability and mechanical properties of spruce wood. Holzforschung 57(5): 539-546.
2. Coates, J. 2000. Interpretation of Infrared Spectra, A Practical Approach in Encyclopedia of Analytical Chemistry. R.A. Meyers (Ed.). John Wiley & Sons Ltd. pp. 10815-10837
3. Dirol, D.; Guyonnet, R. 1993. Durability by rectification process. In: International Research Group Wood Pre, Section 4-Processes, N° IRG/WP 93-40015.
4. Esteves, B.; 2006. Technological Improvement of Portuguese Woods by Heat Modification. Ph.D. Thesis in Environmental Engineering. School of Agronomy. Technical University of Lisbon. In Portuguese. 289p
5. Esteves, B.; Domingos, I.; Pereira, H. 2007a. Improvement of technological quality of eucalypt wood by heat treatment in air at 170-200°C. Forest Prod J 57 (1-2): 47-52.
6. Esteves, B.; Velez Marques, A.; Domingos, I.; Pereira, H. 2007b. Influence of steam heating on the properties of pine (Pinus pinaster) and eucalypt (Eucalyptus globulus) wood. Wood Sci Technol 41(3):193-207.
7. Esteves, B. M.; Domingos, I. J.; Pereira, H. M. 2008a. Pine wood modification by heat treatment in air. Bioresources 3(1): 142-154.
8. Esteves, B.; Graça, J.; Pereira, H. 2008b. Extractive composition and summative chemical analysis of thermally treated eucalypt wood. Holzforschung 62(3):344-351.
9. Esteves, B.; Velez Marques, A.; Domingos, I.; Pereira, H. 2008c. Heat induced colour changes of pine (Pinus pinaster) and eucalypt (Eucalyptus globulus) wood. Wood Sci Technol 42(5): 369-384.
10. Esteves, B.; Videira, R.; Pereira, H. 2011. Chemistry and ecotoxicity of heat treated pine wood extractives, Wood Sci Technol 45 (6 ):661-676.
11. Faix, O. 1991. Classification of lignins from different botanical origins by FT-IR spectroscopy. Holzforschung 45 (1): 21-27.
12. Faix, O. Böttcher, J. 1992. The influence of particle size and concentration in transmission and diffuse reflectance spectroscopy of wood. Holz als Roh- und Werkst 50(6): 221-226.
13. Faix, O.; Meier, D.; Fortmann, I. 1990. Thermal-degradation products of wood. Gas chromatographic separation and mass spectrometric characterization of monomeric lignin derived products. Holz als Rohund Werkst 48(7-8 ):281-285.
14. González-Peña, M.M.; Curling, S.F.; Hale, M.D.C. 2009. On the effect of heat on the chemical composition and dimensions of thermally-modified wood. Polymer Degradation and Stability 94(12): 2184-2193.
15. Jämsä, S.; Viitaniemi, P. 2001. Heat treatment of wood- Better durability without chemicals. In: Proceedings of special seminar held in Antibes, France, city, 68p.
16. Moharram, M.; Mahmoud, O. 2008. FTIR Spectroscopic Study of the Effect of Microwave Heating on the Transformation of Cellulose I into Cellulose II during Mercerization. Journal of Applied Polymer Science 107(1): 30-36.
17. Kamdem, D.; Pizzi, A.; Jermannaud, A. 2002. Durability of heat-treated wood. Holz Roh-Werkst 60(1): 1-6.
18. Kocaefe, D.; Jun, L. S.; Yang, D.Q.; Bouazara, M. 2008a. Mechanical properties, dimensional stability, and mold resistance of heat-treated jack pine and aspen. Forest Prod J 58(6):88-93
19. Kocaefe, D; Poncsak, S.; Boluk, Y. 2008b. Effect of thermal treatment on the chemical composition and mechanical properties of birch and aspen. Bioresources 3(2): 517-537.
20. Kollmann, F.; Fengel, D. 1965. Changes in the Chemical composition of Wood by Thermal Treatment. Holz als Roh und Werkst 12 (12): 461-468.
21. Kotilainen, R.; Toivannen, T.; Alén, R. 2000. FTIR monitoring of chemical changes in softwood during heating. Journal of Wood Chemistry and Technology 20(3): 307-320.
22. Li, J.; Li, B.; Zhang, X. 2002. Comparative studies of heat degradation between larch lignin and Manchurian ash lignin. Polymer Degradation and Stability 78: 279-285.
23. Michell, A.; Higgins, H. 2002. Infrared Spectroscopy in Australian Forest Products research. CSIRO Forestry and Forest Products, Melbourne, Australia 60p.
24. Michell, A.; Watson A.; Higgins H. 1965. An infrared spectroscopic study of delignification of Eucalyptus regnans.. Tappi 48: 520-532.
25. Mitsui, K.; Takada, H., Sugiyama, M.; Hasegawa, R. 2001. Changes in the properties of lightirradiated wood with heat treatment: Part 1 Effect of treatment conditions on the change in color. Holzforschung 55(6): 601-605.
26. Nuopponen, M.; Vuorinen, T.; Jamsä, S.; Viitaniemi, P. 2004. Thermal modifications in softwood studied by FT-IR and UV resonance Raman spectroscopies. J Wood Chem Technol 24(1): 13-26.
27. Rodrigues, J.; Faix O.; Pereira H. 1998. Determination of lignin content of Eucalyptus globulus wood using FTIR spectroscopy. Holzforschung 52(1): 46-50.
28. Sailer, M.; Rapp, A.; Leithoff, H. 2000. Improved resistance of Scots pine and spruce by application of an oil-heat treatment. In: International Research Group Wood Pre, Section 4-Processes, N° IRG/WP 00-40162.
29. Spiridon, I.; Teaca, C.; BodÎrlau, R. 2011. Structural changes evidenced by FTIR spectroscopy in cellulosic materials after pre-treatment with ionic liquid and enzymatic hydrolysis. Bioresources 6(1):400-413.
30. Sivonen, H.; Maunu, S.; Sundholm, F.; Jämsä, S.; Viitaniemi, P. 2002. Magnetic resonance studies of thermally modified wood. Holzforschung 56(6): 648-654.
31. TAPPI Test Method. 1988. Preparation of Wood for Chemical Analysis. T264 om-88. In Tappi Test Methods. Atlanta, GA: Technical Association of the Pulp and Paper Industry.
32. Tjeerdsma, B.; Boonstra, M.; Pizzi, A.; Tekely, P.; Militz, H. 1998. Characterisation of thermaly modified wood: Molecular reasons for wood performance improvement. Holz Roh-Werkst 56(3): 149-153.
33. Tjeerdsma, B.; Militz, H. 2005. Chemical changes in hydrothermal treated wood: FTIR analysis of combined hydrothermal and dry heat-treated wood. Holz als Roh- und Werkst 63(2): 102-111.
34. Unsal, O.; Ayrilmis, N. 2005. Variations in compression strength and surface roughness of heattreated Turkish river red gum, J Wood Sci 51(4): 405-409.
35. Viitanen, H.; Jämsä, S., Paajanen, L.; Nurmi, A.; Viitaniemi, P. 1994. The effect of heat treatment on the properties of spruce. IRG/WP 94-40032, 4p
36. Viitaniemi, P.; Jämsä, S.; Viitanen, H.; 1997. Method for improving biodegradation resistance and dimensional stability of cellulosic products. United States Patent N° 5678324 (US005678324). http:// www.freepatentsonline.com/5678324.html
37. Wang, J.; Cooper, P. 2005. Effect of oil type, temperature and time on moisture properties of hot oil-treated wood. Holz Roh-Werkst 63(6): 417-422
38. Weiland, J; Guyonnet, R. 2003. Study of chemical modifications and fungi degradation of heatly modified wood using DRIFT spectroscopy. Holz als Roh und Werkst 61(3): 216-220.
39. Windeisen, E.; Strobel, C.; Wegener, G. 2007. Chemical changes during the production of thermotreated beech wood. Wood Sci Technol 41(6): 523-536.
40. Yildiz, S. 2002. Physical, mechanical, technological and chemical properties of beech and spruce wood treated by heating. PhD dissertation, Karadeniz Tech. Univ.; Trabzon, Turkey. 200p