Effect of thermal treatment on the chemical composition and mechanical properties of birch and aspen

BioResources

Volumn 3, Issue 2, 2008, Pages 517-537

  Kocaefe, Duygu ^a   Poncsak, Sandor ^a   Boluk, Yaman ^b  

^a UNIVERSITÉ DU QUÉBEC À CHICOUTIMI   (Canada)

^b ALBERTA RESEARCH COUNCIL   (Canada)

Author keywords

Aspen; Birch; Chemical Composition; FTIR; Heat treatment; Mechanical properties

Indexed keywords

ASPEN; BIRCH; CHEMICAL COMPOSITION; CHEMICAL STRUCTURES; CHEMICAL TRANSFORMATIONS; CHEMICAL TREATMENTS; CONVENTIONAL DRYING; EXPERIMENTAL CONDITIONS; FOURIER TRANSFORM INFRA-RED SPECTROSCOPIES; FT-IR ANALYSIS; FTIR; HEAT TREATMENT CONDITIONS; HIGH TEMPERATURE TREATMENTS; HIGHER TEMPERATURES; INVERSE GAS CHROMATOGRAPHIES; MICRO-ORGANISMS; SURFACE COMPOSITIONS; THERMAL TREATMENTS; TREATMENT TEMPERATURES; WOOD STRUCTURES;

CELLULOSE; CHROMATOGRAPHIC ANALYSIS; CRYSTALLIZATION; DEGRADATION; DIMENSIONAL STABILITY; FOURIER TRANSFORM INFRARED SPECTROSCOPY; FOURIER TRANSFORMS; GAS CHROMATOGRAPHY; HEAT TREATING FURNACES; HEAT TREATMENT; LIGNIN; SPECTROSCOPIC ANALYSIS; STRUCTURE (COMPOSITION); WOOD; WOODEN BUILDINGS;

MECHANICAL PROPERTIES;

BETULA; CELLULOSE; CHEMICAL COMPOSITION; CHROMATOGRAPHY; CRYSTALLIZATION; DIMENSIONAL STABILITY; FOURIER ANALYSIS; FURNACES; GAS CHROMATOGRAPHY; HEAT TREATMENT; INFRARED SPECTROSCOPY; LIGNINS; MECHANICAL PROPERTIES; POPULUS;

EID: 64749093424     PISSN: None     EISSN: 19302126     Source Type: Journal    
DOI: None     Document Type: Review

References (47)

1. Alén, R., Kotilainen, R., Zaman, A. (2002). "Thermochemical behavior of Norway Spruce (Picea abies) at 180-225°C," Wood Sci. Technol. 36, 163-171.
2. Bhuiyan, M. T. R., Hirai, N., and Sobue, N. (2000). "Changes of crystallinity in wood cellulose by heat treatment under dried and moist conditions," J. Wood Sci. 46, 431-436.
3. Boonstra, M.-J., and Tjeerdsma, B.-F. (2006). "Chemical analysis of heat-treated softwo ods," Holz als Roh und Werkstoff 64, 204-211.
4. Boonstra, M.-J., Van Acker, J., Tjeerdsma, B.-F., and Kegel, E. (2007). "Strength properties of thermally modified softwoods and its relation to polymeric structural wood constituents," Annals of Forest Science 64, 679-690.
5. Chang, S.-T., and Chang, H.-T. (2000). "Comparisons of the photostability of esterified wood," Polymer Degradation and Stability 71, 261-266.
6. Chanrion, P., Schreiber, J. (2002). Les Différents Procédés, Bois Traité par Haute Température, Edition CTBA, Paris, 115 p.
7. Colom, X., Carrillo, F., Nogués, F., Garriga, P. (2003). "Structural analysis of photodegraded wood by means of FTIR spectroscopy," Polymer Degradation and Stability 80, 543-549.
8. Condar, J. R., and Young, C. L. (1979). Physicochemical Measurement by Gas Chromatograhy, Wiley Interscience, New York, New York.
9. Dirol, D., and Guyonnet, R. (1993). "The improvement of wood durability by retification process," Document No. IRG/WP 98-40015. International Research Group on Wood Protection, Stockholm, Sweden
10. Dwianto, W., Tanaka, F., Inoue, M., and Norimoto, M. (1996) "Crystallinity changes of wood by heat or steam treatment," Wood Research 83, 47-49
11. Erçin, D., and Yurum, Y. (2003). "Carbonization of Fir (Abies bornmulleriana) wood in an open pyrolysis system at 50-300°C," J. Analytical Applied Pyrolysis 67, 11-22.
12. Feipang, L. P., and Rials, T. G. (1998). "Relationship of wood surface energy to surface composition," Langmuir 14, 536-541.
13. Felix, J. M., Gatenholm, P., and Schreiber, H. P. (1993). "Controlled interactions in cellulose-polymer composites. 1: Effect on mechanical properties," Polym. Composites 14(6), 449-457.
14. Fengel, D., and Wegener, G. (1989). Wood: Chemistry, ultrastructure, Reactions, Walter de Gruyter, Berlin.
15. Gerardin, P., Petric, M., Petrissans, M., Lambert, J., and Ehrhrardt, J. (2007). "Evolution of wood surface energy after heat treatment," Polymer Degradation and Stability 92, 653-657.
16. Gosselink, R. J. A., Krosse, A. M. A., Van der Putten, J. C., Van der Kolk, J. C., De Klerk-Engels, B., and Van Dam, J. E. G. (2004). "Wood preservation by low-temperature carbonization," Industrial Crops and Produdts 19, 3-12.
17. Hakkou, M., Pétrissens, M., Zoulalian, A., and Gérardin, P. (2005). "Investigation of wood wettability changes during heat treatment on the basis of chemical analysis," Polymer Degradation and Stability 89, 1-5.
18. Hingston, J. A., Collins, C. D., Murphy, R. J., and Lester, J. N. (2001). "Leaching of chromated copper arsenate wood preservatives: A review," Environment Pollution 111(1), 53-56.
19. Hon, D. N.-S., and Minemura, N. (2001). "Color and discoloration," In: Hon, D.N.-S. & Shiraishi; N. (eds.). Wood and Cellulosic Chemistry. 2nd Ed., rev. and expanded. Marcel Dekker, New York, 385-442.
20. Kubojima, Y., Okano, T., and Ohta, M. (2000). "Bending strength and toughness of heat-treated wood," J. Wood Science 46, 8-15.
21. Kubojima, Y., Wada, M., Suzuki, Y., and Tonosaki, M. (2001). "Real-time measurement of vibrational properties and fine structural properties of wood at high temperature," Wood Sci.Technol. 35, 503-515.
22. Kocaefe, D., Chaudry, B., Poncsak, S., Bouazara, M., and Pichette, A. (2007). "Thermogravimetric study of high temperature treatment of aspen: Effect of treatment parameters oh weight loss and mechanical properties," J. Materials Science 42(3), 854-866.
23. Lavielle, L., and Schultz, J. (1991). "Surface properties of carbon fibers determined by inverse chromatography: Role of pretreatment," Langmuir 7, 978-98.
24. Létourneau, D. (2006). "Evaluation de l'influence de la temperature de traitement sur les proprietes mecaniques du pin gris Pinus Banksiana Lamb," Master Thesis, University of Quebec at Chicoutimi, Chicoutimi Quebec, Canada.
25. Liu, F. P., Rials, T.G., and Simonsen, J. (1998). "Relationship of wood surface energy to surface composition," Langmuir 14, 536-541.
26. Lloyd, D. R., Schreiber, H. P., and Ward, T. C, (eds.) (1989). Inverse Gas Chromatography, ACS Symposium Series No. 391, American Chemical Society, Washington, D.C.
27. Militz, H. (2002). "Thermal treatment of wood: European processes and their background," Document No. IRG/WP 02-40241, International Research Group on Wood Protection, Stockholm, Sweden.
28. Muller, U., Ratzsch, M., Schwanninger, M., Steiner, M., and Zobl, H. (2003) "Yellowing and IR-changes of spruce wood as result of UV-irradiation," J. Photochemistry Photobiology B, Biology 69, 97-105.
29. Nishimura, K., Onishi, M., Masuda, M., Koga, K., and Matsuyama, R. (1983). "Reactions of wood components during maturation." In: J.R. Piggott (ed.), Flavour of Distilled Beverages: Origin and Development, Ellis Horwood Limited, England (1983), pp. 241-255.
30. Pandey, K. K., and Pitman, A. J. (2003). "FTIR studies of the changes in wood chemistry following decay by brown-rot and white-rot fungi," International Biodeterior-ation & Biodegradation 52(3), 151-160.
31. Panzer, U., and Schreiber, H.P. (1992). "On the evaluation of surface interactions by inverse gas chromatography," Macromolecules 25, 3633-3631.
32. Papirer, E., Brendle, E., Balard, H., and Vergelati, C. (2000). "Inverse gas chromatography investigation of the surface properties of cellulose" Adhesion Sci. Technol. 14(3), 321-337.
33. Pavlo, B., and Niemz, P. (2003). "Effect of temperature on color and strength of spruce wood," Holzforschung 57, 539-546.
34. Pettersen, R. (1984). "The chemical composition of wood," in: Rowell, Roger M. (ed.), The Chemistry of Solid Wood, Advances in Chemistry Series 207, Washington DC, American Chemical Society, Chapter 2.
35. Poncsak, S., Kocaefe, D., Bouazara, M., Pichette, A. (2006). "Effect of high temperature treatment on the mechanical properties of birch," Wood Sci. Technol. 40, 647-668.
36. Santos, J. A. (2000). "Mechanical behaviour of eucalyptus wood modified by heat," Wood Sci. Technol. 34, 39-43.
37. Schultze, J., and Lavielle, L. (1989). "Interfacial properties of carbon fiber - epoxy matrix composites," in Inverse Gas Chromatography, American Chemical Society Symp. Ser. 391, Lloyd, D. R., Ward, T. C, and Schreiber, H. P. (eds.) Washington DC.
38. Saint-Flour, C., and Papirer, E. (1982) "Gas-solid chromatography: A method of measuring surface free energy characteristics of short glass fibers through retention volumes measured near zero surface coverage," Ind. Eng. Chem. Prod. Res. Dev. 21, 666-669.
39. Schreiber, H. P., Wertheimer, M. R., and Lambla, M. (1982). "Surface interactions and some properties of filled polymers," J. Appl. Polym. Sci. 27(6), 2269-2280.
40. Shi J. L., Kocaefe, D., Yang, D. Q., and Bouazara, M. (2007) "Mechanical properties, dimensional stability, and mold resistance of heat-treated jack pine and aspen," submitted to Forest Product Journal, Manuscrit No. FPJ 10212.
41. Sinoven, H., Maunu, S. L., Sundholm, F., Jamsa, S., and Viitaniemi, P. (2002). "Magnetic resonance studies of thermally modified wood," Holzforschung 56, 648-654.
42. Spiegelberg, H. L. (1966). "The effect of hemicelluloses on the mechanical properties of individual pulp fibers," Thesis, The Institute for Paper Chemistry, Lawrence University, Appleton, Wisconsin.
43. Sørensen, J. S. (1997). "Comparison of wet oxidation and enzyme treatment," Bachelor Project, Plant Fibre Laboratory, Department of Agricultural Sciences, The Royal Veterinary and Agricultural University, Copenhagen.
44. Syrjanen, T.; Kestopuu, O., Jamsa, S., and Viitaniemi, P. (2001). "Heat treatment of wood in Finland - State of the art," Proceedings of Special Seminar on Heat Treatment of Wood, Antibes, France, Rapp, A. O. (ed.), BFH, The Federal Research Centre for Forestry and Forest Products, Hamburg, 11-19.
45. Theander, O., Nelson, D. A., (1988). "Aqueous, high-temperature transformation of carbohydrates relative to utilization of biomass," In: Tipson, R. S., and Horton, D. (eds.), Advances in Carbonhydrate Chemistry and Biochemistry, Academic, Harcourt Brace Jovanovich Publishers, San Diego, 273-326.
46. Vernois, M. (2001). "Heat treatment of wood in France - State of art," Proceedings of Special seminar "Review on Heat Treatment of Wood", Antibes, France February 9, 2001, A.O. Rapp Ed.; BFH the federal research Centre for forestry and forest products, Hamburg, 39-46.
47. Yildiz, S., Çolakoglu, G., Yildiz, Ü. C., Gezer, E. D., and Temiz, A. (2002). "Effects of heat treatment on modulus of elasticity of beech wood," Document No. IRG/WP 02-40222. International Research Group on Wood Protection, Stockholm, Sweden.