Comparison of the mechanical behaviour of standard and auxetic foams by x-ray computed tomography and digital volume correlation

Strain

Volumn 49, Issue 6, 2013, Pages 467-482

  Pierron, F ^a   McDonald, S A ^b   Hollis, D ^c   Fu, J ^d,e   Withers, P J ^b   Alderson, A ^f  

^a UNIVERSITY OF SOUTHAMPTON   (United Kingdom)

^b UNIVERSITY OF MANCHESTER   (United Kingdom)

^c LAVISION GMBH   (Germany)

^d ARTS ET MÉTIERS PARISTECH   (France)

^e LOUGHBOROUGH UNIVERSITY   (United Kingdom)

^f SHEFFIELD HALLAM UNIVERSITY   (United Kingdom)

Author keywords

auxetic foam; digital volume correlation; low density polymeric foam; Poisson's ratio; X ray CT

Indexed keywords

AUXETIC FOAMS; DIGITAL VOLUME CORRELATIONS; POISSON'S RATIO; POLYMERIC FOAMS; X-RAY CT;

COMPUTERIZED TOMOGRAPHY; MECHANICAL ENGINEERING; POISSON RATIO; STRAIN MEASUREMENT; X RAYS;

STRAIN;

EID: 84888439831     PISSN: 00392103     EISSN: 14751305     Source Type: Journal    
DOI: 10.1111/str.12053     Document Type: Article

References (50)

1. Pierron, F., (2010) Identification of Poisson's ratios of standard and auxetic low density polymeric foams from full-field measurements. J. Strain Anal. Eng. Des. 45, 233-253.
2. Trench, P., Little, E. G., Tocher, D., O'Donnell, P. O., and, Lawlor, V., (2009) The performance of three-dimensional strain rosettes evaluated when embedded into a sphere. Strain 45, 149-159.
3. O'Driscoll, C., O'Donnell, E., Stanley, W., O'Donnell, P., and, Little, E. G., (2012) A comparison of three-dimensional embedded strain transducers, compression tested within the same strain field while offset at an angle with the principal axes. Strain 48, 375-387.
4. Muthupillai, R., Lomas, D. J., Rossman, P. J., Greenleaf, J. F., Manduca, A., and, Ehman, R. L., (1995) Magnetic resonance elastography by direct visualization of propagating acoustic strain waves. Science 269, 1854-1857.
5. Manduca, A., Oliphant, T. E., Dresner, M. A., Mahowald, J. L., Kruse, S. A., Amromin, E., Felmlee, J. P., Greenleaf, J. F., and, Ehman, R. L., (2001) Magnetic resonance elastography: non-invasive mapping of tissue elasticity. Med. Image Anal. 5, 237-254.
6. Sinkus, R., Tanter, M., Catheline, S., Lorenzen, J., Kuhl, C., Sondermann, E., and, Fink, M., (2005) Imaging anisotropic and viscous properties of breast tissue by magnetic resonance-elastography. Magn. Reson. Med. 53, 372-387.
7. Bayly, P. V., Black, E. E., Pedersen, R. C., Leister, E. P., and, Genin, G. M., (2006) In vivo imaging of rapid deformation and strain in an animal model of traumatic brain injury. J. Biomech. 39, 1086-1095.
8. Pesavento, A., Lorenz, A., and, Ermert, H., (1999) System for real-time elastography. Electron. Lett. 35, 941-942.
9. Khaled, W., Reichling, S., Bruhns, O. T., and, Ermert, H., (2006) Ultrasonic strain imaging and reconstructive elastography for biological tissue. Ultrasonics 44, 199-202.
10. De La Torre Ibarra, M. H., Ruiz, P. D., and, Huntley, J. M., (2009) Simultaneous measurement of in-plane and out-of-plane displacement fields in scattering media using phase-contrast spectral optical coherence tomography. Opt. Lett. 34, 806-808.
11. Ruiz, P. D., Huntley, J. M., and, Maranon, A., (2006) Tilt scanning interferometry: a novel technique for mapping structure and three-dimensional displacement fields within optically scattering media. Proc. Math. Phys. Eng. Sci. 462, 2481-2502.
12. Ruiz, P. D., Huntley, J. M., and, Wildman, R. D., (2005) Depth-resolved whole-field displacement measurement by wavelength-scanning electronic speckle pattern interferometry. Appl. Optics 44, 3945-3953.
13. Ruiz, P. D., Huntley, J. M., and, Coupland, J. M., (2011) Depth-resolved imaging and displacement measurement techniques viewed as linear filtering operations. Exp. Mech. 51, 453-465.
14. Restivo, G., and, Cloud, G. L., (2008) Embedded digital speckle pattern interferometry for three-dimensional strain analysis. Exp. Mech. 48, 731-740.
15. Owen, R. A., Preston, R. V., Withers, P. J., Shercliff, H. R., and, Webster, P. J., (2003) Neutron and synchrotron measurements of residual strain in an aluminium alloy TIG weld. Mater. Sci. Eng. A 346, 159-167.
16. Bay, B. K., Smith, T. S., Fyhrie, D. P., and, Saad, M., (1999) Digital volume correlation: three-dimensional strain mapping using X-ray tomography. Exp. Mech. 39, 217-226.
17. Maire, E., and, Withers, P. J., (2013) Quantitative X-ray tomography. Int. Mater. Rev. in press.
18. Sutton, M. A., Orteu, J.-J., and, Schreier, H., (2009) Image Correlation for Shape, Motion and Deformation Measurements. Springer, New York.
19. Germaneau, A., Doumalin, P., and, Dupré, J. C., (2007) 3D strain field measurement by correlation of volume images using scattered light: recording of images and choice of marks. Strain 43, 207-218.
20. Germaneau, A., Doumalin, P., and, Dupré, J. C., (2008) Full 3D measurement of strain field by scattered light for analysis of structures. Exp. Mech. 47, 523-532.
21. Germaneau, A., Doumalin, P., and, Dupré, J. C., (2008) Comparison between X-ray micro-computed tomography and optical scanning tomography for full 3D strain measurement by digital volume correlation. NDT and E Int. 41, 407-415.
22. Fu, J., Haghighi-Abayneh, M., Pierron, F., and, Ruiz, P. D., Assessment of corneal deformation using optical coherence tomography and digital volume correlation. Proceedings of the SEM Annual Conference, June 11-14 in Costa Mesa, CA, USA, (Society for Experimental Mechanics, Ed). 2012.
23. Franck, C., Hong, S., Maskarinec, S. A., Tirrell, D. A., and, Ravichandran, G., (2008) Three-dimensional full-field measurements of large deformations in soft materials using confocal microscopy and digital volume correlation. Exp. Mech. 47, 427-438.
24. Benoit, A., Guérard, S., Gillet, B., Guillot, G., Hild, F., Mitton, D., Périé, J.-N., and, Roux, S., (2009) 3D analysis from micro-MRI during in situ compression on cancellous bone. J. Biomech. 42, 2381-2386.
25. Kak, A., and, Slaney, M., (1988) Principles of Computerized Tomographic Imaging. IEEE Press, New York.
26. Landis, E. N., and, Keane, D. T., (2010) X-ray microtomography. Mater Charact. 61, 1305-1316.
27. Toda, H., Sinclair, I., Buffière, J.-Y., Maire, E., Khor, K. H., Gregson, P., and, Kobayashi, T., (2004) A 3D measurement procedure for internal local crack driving forces via synchrotron X-ray microtomography. Acta Mater. 52, 1305-1317.
28. Moffat, A. J., Wright, P., Buffière, J.-Y., Sinclair, I., and, Spearing, S. M., (2008) Micromechanisms of damage in 0° splits in a [90/0]s composite material using synchrotron radiation computed tomography. Scr. Mater. 59, 1043-1046.
29. Chateau, C., Gélébart, L., Bornert, M., Crépin, J., Boller, E., Sauder, C., and, Ludwig, W., (2011) In situ X-ray microtomography characterization of damage in SiCf/SiC minicomposites. Compos. Sci. Technol. 71, 916-924.
30. Forsberg, F., and, Siviour, C., (2009) 3D deformation and strain analysis in compacted sugar using X-ray microtomography and digital volume correlation. Meas. Sci. Technol. 20, 095703.
31. Hall, S. A., Lenoir, N., and, Viggiani, G., (2009) Full-field characterisation of strain localisation evolution in sand under triaxial loading by in-situ X-ray microtomography and 3D-volumetric digital image correlation. 71st European Association of Geoscientists and Engineers Conference and Exhibition 2009, Volume 4 (Society of Petroleum Engineers, Ed). 2327-2331.
32. Proudhon, H., Moffat, A., Sinclair, I., and, Buffière, J.-Y., (2012) Three-dimensional characterisation and modelling of small fatigue corner cracks in high strength Al-alloys. C.R. Phys. 13, 316-327.
33. Roux, S., Hild, F., Viot, P., and, Bernard, D., (2008) Three-dimensional image correlation from X-ray computed tomography of solid foam. Composites Part A 39, 1253-1265.
34. McDonald, S. A., Ravirala, N., Withers, P. J., and, Alderson, A., (2009) In situ three-dimensional X-ray microtomography of an auxetic foam under tension. Scr. Mater. 60, 232-235.
35. Forsberg, F., Sjödahl, M., Mooser, R., Hack, E., and, Wyss, P., (2010) Full three-dimensional strain measurements on wood exposed to three-point bending: Analysis by use of digital volume correlation applied to synchrotron radiation micro-computed tomography image data. Exp. Mech. 46, 47-60.
36. Bay, B. K., (2001) Experimental measurement of three-dimensional continuum-level strain fields in trabecular bone. Adv. Exp. Med. Biol. 496, 181-197.
37. Smith, T. S., Bay, B. K., and, Rashid, M. M., (2002) Digital volume correlation including rotational degrees of freedom during minimization. Exp. Mech. 42, 272-278.
38. Gates, M., Lambros, J., and, Heath, M. T., (2011) Towards high performance digital volume correlation. Exp. Mech. 51, 491-507.
39. Jandejsek, I., Jiroušek, O., and, Vavrìk, D., (2011) Precise strain measurement in complex materials using digital volumetric correlation and time lapse micro-CT data. Procedia Eng. 10, 1730-1735.
40. Limodin, N., Réthoré, J., Buffière, J.-Y., Gravouil, A., Hild, F., and, Roux, S., (2009) Crack closure and stress intensity factor measurements in nodular graphite cast iron using three-dimensional correlation of laboratory X-ray microtomography images. Acta Mater. 57, 4090-4101.
41. Limodin, N., Réthoré, J., Buffière, J.-Y., Hild, F., Roux, S., Ludwig, W., Rannou, J., and, Gravouil, A., (2010) Influence of closure on the 3D propagation of fatigue cracks in a nodular cast iron investigated by X-ray tomography and 3D volume correlation. Acta Mater. 58, 2957-2967.
42. Lenoir, N., Bornert, M., Desrues, J., Bésuelle, P., and, Viggiani, C., (2007) Volumetric digital image correlation applied to X-ray microtomography images from triaxial compression tests on argillaceous rock. Strain 43, 193-205.
43. Davis digital volume correlation (DVC) package. www.lavision.de.
44. Chiang, F.-P., Uzer, G., and, Yu, J., (2009) Auxetic PVC foam as a new core material for sandwich structures. 24th Annual Technical Conference of the American Society for Composites 2009 and 1st Joint Canadian-American Technical Conference on Composites, Volume 3 (American Society for Composites, Ed). 1667-1677.
45. Alderson, A., Rasburn, J., and, Evans, K. E., (2007) Mass transport properties of auxetic (negative Poisson's ratio) foams. Phys. Status Solidi B 244, 817-827.
46. Alderson, A., and, Evans, K. L., (2007) Auxetic materials. Proc. Inst. Mech. Eng. Part G J. Aerosp. Eng. 221, 565-575.
47. Scarpa, F., and, Bezazi, A., (2007) Mechanical behaviour of conventional and negative Poisson's ratio thermoplastic polyurethane foams under compressive cyclic loading. Int. J. Fatigue 29, 922-930.
48. McDonald, S. A., Dedreuil-Monet, G., Yao, Y. T., Alderson, A., and, Withers, P. J., (2011) In situ 3D X-ray microtomography study comparing auxetic and non-auxetic polymeric foams under tension. Phys. Status Solidi B 248, 45-51.
49. Scarpa, F., Pastorino, P., Garelli, A., Patsias, S., and, Ruzzene, M., (2005) Auxetic compliant flexible PU foams static and dynamic properties. Phys. Status Solidi B 242, 681-694.
50. Horrigan, E. J., Smith, C. W., Scarpa, F. L., Gaspar, N., Javadi, A. A., Berger, M. A., and, Evans, K. E., (2009) Simulated optimisation of disordered structures with negative Poisson's ratios. Mech. Mater. 41, 919-927.