Calcium phosphate coatings: Morphology, micro-structure and mechanical properties

Ceramics International

Volumn 40, Issue 1 PART A, 2014, Pages 563-572

  Saber Samandari, Saeed ^a   Alamara, Kadhim ^b   Saber Samandari, Samaneh ^c  

^a AMIRKABIR UNIVERSITY OF TECHNOLOGY   (Iran)

^b SWINBURNE UNIVERSITY OF TECHNOLOGY   (Australia)

^c EASTERN MEDITERRANEAN UNIVERSITY   (Turkey)

Author keywords

C. Mechanical properties; Calcium phosphate; Microstructure; Morphology

Indexed keywords

ATOMIC FORCE MICROSCOPY; CALCIUM PHOSPHATE; DROPS; HIGH RESOLUTION TRANSMISSION ELECTRON MICROSCOPY; INTERFACES (MATERIALS); ION BEAMS; MECHANICAL PROPERTIES; MICROSTRUCTURE; MORPHOLOGY; PREHEATING; SCANNING ELECTRON MICROSCOPY; SUBSTRATES; TRANSMISSION ELECTRON MICROSCOPY;

ADHERENT INTERFACES; AMORPHOUS CALCIUM PHOSPHATE; BIOMEDICAL IMPLANTS; HARDNESS AND ELASTIC MODULUS; MICRO RAMAN SPECTROSCOPY; MICROMECHANICAL PROPERTY; SUBSTRATE ADHESION; SUBSTRATE PREHEATING TEMPERATURE;

PHOSPHATE COATINGS;

EID: 84887622501     PISSN: 02728842     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.ceramint.2013.06.038     Document Type: Article

References (48)

1. M. Psandideh-Fard, V. Persin, S. Chandra, and J. Mostaghimi Splat shapes in a thermal spray coating process: simulations and experiments Journal of Thermal Spray Technology 11 2002 206 217
2. H. Li, B.S. Ng, K.A. Khor, P. Cheang, and T.W. Clyne Raman spectroscopy determination of phases within thermal sprayed hydroxyapatite splats and subsequent in vitro dissolution Acta Materialia 52 2004 445 453
3. S. Saber-Samandari, and K.A. Gross Amorphous calcium phosphate offers improved crack resistance - a design feature from nature Acta Biomaterialia 7 2011 4235 4241
4. S. Saber-Samandari, and K.A. Gross The use of thermal printing to control the properties of calcium phosphate deposits Biomaterials 31 2010 6386 6393
5. M. Vardelle, A. Vardelle, A.C. Leger, P. Fauchais, and D. Gobin Influence of particle parameters at impact on splat formation and solidification in plasma spraying processes Journal of Thermal Spray Technology 4 1995 50 58
6. H. Li, S. Costil, H.L. Liao, C.J. Li, M. Planche, and C. Coddet Effects of surface conditions on the flattening behavior of plasma sprayed Cu splats Surface and Coatings Technology 200 2006 5435 5446
7. S. Sampath, X.Y. Jiang, J. Matejicek, A.C. Leger, and A. Vardelle Substrate temperature effects on splat formation, microstructure development and properties of plasma sprayed coatings Part I: case study for partially stabilized zirconia Materials Science and Engineering: A 272 1999 181 188
8. M. Fukumoto, E. Nishioka, and T. Matsubara Flattening and solidification behaviour of a metal droplet on a flat substrate surface held at various temperatures Surface and Coatings Technology 120-121 1999 131 137
9. J. Madejski Droplets on impact with a solid surface, Int Journal of Heat and Mass Transfer 26 1983 1095 1098
10. G. Montavon, S. Sampath, C.C. Berndt, H. Herman, and C. Coddet Effects of vacuum plasma spray processing parameters on splat morphology Journal of Thermal Spray Technology 4 1995 67 74
11. J.P. Delplanque, and R.H. Rangel An improved model for droplet solidification on a flat surface Journal of Materials Science 32 1997 1519 1530
12. J. Mostaghimi, M. Passandideh-Fard, and S. Chandra Dynamics of splat formation in plasma spray coating process Plasma Chemistry and Plasma Processing 22 2002 59 84
13. S. Sampath, and X. Jiang Splat formation and microstructure development during plasma spraying: deposition temperature effects Materials Science and Engineering: A 304-306 2001 144 150
14. M. Fukumoto, S. Katoh, and I. Okane Splat behavior of plasma sprayed particles on flat substrate surface A. Ohmori, Thermal Spraying - Current Status and Future Trends 1995 High Temperature Society of Japan Osaka, Japan 353 359
15. Y. Huang, L. Song, X. Liu, Y. Xiao, Y. Wu, J. Chen, F. Wu, and Z. Gu Hydroxyapatite coatings deposited by liquid precursor plasma spraying: controlled dense and porous microstructures and osteoblastic cell responses Biofab 2 2010 045003
16. H. Li, K.A. Khor, and P. Cheang Thermal sprayed hydroxyapatite splats: nanostructures, pore formation mechanisms and TEM characterization Biomaterials 25 2004 3463 3471
17. H.R. Salimi-Jazi, L. Pershin, T.W. Coyle, J. Mostaghimi, S. Chandra, Y.C. Lau, L. Rosenzweig, and E. Moran Effect of droplet characteristics and substrate surface topography on the final morphology of plasma-sprayed zirconia single splats Journal of Thermal Spray Technology 16 2007 291 299
18. L. Li, B. Kharas, H. Zhang, and S. Sampath Suppresion of crystallization during high velocity impact quenching of alumina droplets: observations and characterization Materials Science and Engineering: A 456 2007 35 42
19. S. Brossard, P.R. Munroe, A.T.T. Tran, and M.M. Hyland Study of the effects of surface chemistry on splat formation for plasma sprayed NiCr onto stainless steel substrates Surface and Coatings Technology 204 2010 1599 1607
20. K.A. Gross, and S. Saber-Samandari Nano-mechanical properties of hydroxyapatite coatings with a focus on the single solidified droplet Journal of the Australian Ceramic Society 43 2007 98 101
21. S. Saber-Samandari, C.C. Berndt, and K.A. Gross Selection of the implant and coating materials for optimized performance by means of nanoindentation Acta Biomaterialia 7 2011 874 881
22. W.C. Oliver, and G.M. Pharr Measurement of hardness and elastic modulus by instrumented indentation: advances in understanding and refinements to methodology Journal of Materials Research 19 2004 3 20
23. S. Saber-Samandari, and K.A. Gross Effect of angled indentation on mechanical properties Journal of the European Ceramic Society 29 2009 2461 2467
24. V.V. Sobolev Formation of splat morphology during thermal spraying Materials Letters 36 1998 123 127
25. M. Fukumoto, T. Yamaguchi, M. Yamada, and T. Yasui Splash splat to disk splat transition behavior in plasma-sprayed metallic materials Journal of Thermal Spray Technology 16 2007 905 912
26. Y.T. Cheng, and W.L. Johnson Disordered materials: a survey of amorphous solids Science 235 1987 997 1002
27. C. Combes, and C. Rey Amorphous calcium phosphates: synthesis, properties and uses in biomaterials Acta Biomaterialia 6 2010 3362 3378
28. Y.C. Tsui, C. Doyle, and T.W. Clyne Plasma sprayed hydroxyapatite coatings on titanium substrates. Part 2: optimisation of coating properties Biomaterials 19 1998 2031 2043
29. R.B. Heimann, and R. Wirth Formation and transformation of amorphous calcium phosphates on titanium alloy surfaces during atmospheric plasma spraying and their subsequent in vitro performance Biomaterials 27 2006 823 831
30. M. Sebastiani, G. Bolleli, L. Lusvarghi, P.P. Bandypadhyay, and E. Bemporad High resolution residual stress measurement on amorphous and crystalline plasma-sprayed single-splats Surface and Coatings Technology 206 2012 4872 4880
31. S. Chandra, and P. Fauchais Formation of solid splats during thermal spray deposition Journal of Thermal Spray Technology 18 2009 148 180
32. T. Chraska, and A.H. King Transmission electron microscopy study of rapid solidification of plasma sprayed zirconia - Part II. Interfaces and subsequent splat Thin Solid Films 397 2001 40 48
33. H.-D. Steffens, B. Wielage, and J. Drozak Interface phenomena and bonding mechanism of thermally-sprayed metal and ceramic composites Surface and Coatings Technology 45 1991 299 308
34. S. Saber-Samandari, and K.A. Gross Nanoindentation reveals mechanical properties within thermally sprayed hydroxyapatite coatings Surface and Coatings Technology 203 2009 1660 1664
35. W.C. Oliver, and G.M. Pharr An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments Journal of Materials Research 7 1992 1564 1583
36. X. Chen, and J.J. Vlassak Numerical study on the measurement of thin film mechanical properties by means of nanoindentation Journal of Materials Research 16 2001 2974 2982
37. M. Lichinchi, C. Lenardi, J. Haupt, and R. Vitali Simulation of Berkovich nanoindentation experiments on thin films using finite element method Thin Solid Films 312 1998 240 248
38. X. Cai, and H. Bangert Hardness measurements of thin films-determining the critical ratio of depth to thickness using FEM Thin Solid Films 264 1995 59 71
39. Z.-H. Xu, and D. Rowcliffe Finite element analysis of substrate effects on indentation behaviour of thin films Thin Solid Films 447-448 2004 399 405
40. G. DeWith, H.J.A. VanDijk, N. Hattu, and K. Prijs Preparation, microstructure and mechanical properties of dense polycrystalline hydroxyapatite Journal of Materials Science 16 1981 1592 1598
41. A. Abedini, A. Pourmousa, S. Chandra, and J. Mostaghimi Effect of substrate temperature on the properties of coatings and splats deposited by wire arc spraying Surface and Coatings Technology 201 2006 3350 3358
42. K. Yang, M. Fukumoto, T. Yasui, and M. Yamada Study of substrate preheating on flattening behavior of thermal-sprayed copper particles Journal of Thermal Spray Technology 19 2010 1195 1205
43. T. Poirier, P. Planche, O. Landemarre, and C. Coddet Particles spreading phenomena in the case of glass thermal spraying Journal of Thermal Spray Technology 17 2008 564 573
44. Y. Tanaka, and M. Fukumoto Investigation of dominating factors on flattening behavior of plasma sprayed ceramic particles Surface and Coatings Technology 120-121 1999 124 130
45. K. Alamara, S. Saber-Samandari, and C.C. Berndt Splat formation of polypropylene flame sprayed onto a flat surface Surface and Coatings Technology 205 2010 2518 2524
46. K.A. Gross, S. Saber-Samandari, and K. Heeman Evaluation of commercial implants with nanoindentation defines future development needs for hydroxyapatite coatings Journal of Biomedical Materials Research Part B 93 2010 1 8
47. S. Saber-Samandari, and K.A. Gross Nanoindentation on the surface of thermally sprayed coatings Surface and Coatings Technology 203 2009 3516 3520
48. S. Saber-Samandari, and K.A. Gross Micromechanical properties of single crystal hydroxyapatite by nanoindentation Acta Biomaterialia 5 2009 2206 2212