Particles spreading phenomena in the case of glass thermal spraying

Journal of Thermal Spray Technology

Volumn 17, Issue 4, 2008, Pages 564-573

  Poirier, Thierry ^a   Planche, Marie Pierre ^b   Landemarre, Olivier ^b   Coddet, Christian ^b  

^a UNIVERSIDAD SIMÓN BOLÍVAR   (Venezuela)

^b UNIVERSITÉ DE TECHNOLOGIE DE BELFORT MONTBÉLIARD   (France)

Author keywords

Cooling; Fragmentation; Glass; Splat; Substrate temperature; Wavelets

Indexed keywords

AS FIBERS; CRYSTALLINE OXIDES; FRAGMENTATION; GLASS COMPOSITIONS; HIGH VELOCITIES; HYDRODYNAMIC PROPERTIES; SPLAT; SPLAT FORMATIONS; SUBSTRATE TEMPERATURE; TRANSITION TEMPERATURES; UNOBSERVABLE; WAVELETS; WIPE TESTS;

COOLING; CRYSTALLINE MATERIALS; FLUID DYNAMICS; GLASS; GLASS TRANSITION; PESTICIDES; THERMOELECTRICITY;

THERMAL SPRAYING;

EID: 56749170674     PISSN: 10599630     EISSN: None     Source Type: Journal    
DOI: 10.1007/s11666-008-9211-3     Document Type: Article

References (54)

1. D. Gawne, Y. Bao, and T. Zhang, The Effect of Substrate Temperature on the Adhesion of Plasma Sprayed Borosilicate Glass Coatings, Thermal Spray. A United Forum for Scientific and Technological Advances, C. Berndt, Ed., ASM International, Indianapolis, IN, 1997, p 467-472
2. D. Gawne, Z. Qiu, T. Zhang, Y. Bao, and K. Zhang, Abrasive Wear Resistance of Plasma Sprayed Glass-Composite Coatings, Thermal Spray: Surface Engineering Via Applied Research, C. Berndt, Ed., TSS, DVS and IIW, Montreal, Quebec, 2000, p 977-981
3. T. Zhang, Y. Bao, D.T. Gawne, Process Model of Plasma Enamelling, J. Eur. Ceram. Soc. 23 (2003) 1019-1026
4. Y. Bao, T. Zhang, and D. Gawne, Analysis of Residual Stress Generated During Plasma Spraying of Glass Coatings, ITSC 98, Nice, France
5. T. Zhang, Z. Qiu, Y. Bao, D. Gawne, and K. Zhang, Temperature Profiles and Thermal Stress Analysis of Plasma Sprayed Glass-Composite Coatings, Thermal Spray: Surface Engineering Via Applied Research, C. Berndt, Ed., TSS, DVS and IIW, Montreal, Quebec, 2000, p 355-361
6. T.M. Lee, E. Chang, B.C. Wang, C.Y. Yang, Characteristics of Plasma-Sprayed Bioactive Glass Coatings on Ti-6A1-4V Alloy: An In Vitro Study, Surf. Coat. Technol. 79 (1996) 170-177
7. E. Verne, M. Ferraris, A. Ventrella, L. Paracchini, Sintering, Plasma Spray Deposition of Bioactive Glass-Matrix Composites for Medical Applications, J. Eur. Cer. Soc., 18 (1998) 363-372
8. E. Verne, M. Ferraris, C. Jana, L. Paracchini, Bioverit1 I Base Glass/Ti Particulate Biocomposite: In Situ Vacuum Plasma Spray Deposition, J. Eur. Cer. Soc. 20 (2000) 473-479
9. G.Z. Komskii and G. Saakov, Forming Decorative Protective Coatings by Plasma Spraying, Steklo I keramika no. 4, p 22-24, Izdatel'stvo Lad'ia, Moscow, Russia, April 1991
10. V.S. Bessmertnyi, V.P. Krokhin, V.A. Panasenko, N.A. Drizhd, P.S. Dyumina, O.M. Kolchina, Plasma Rod Decorating of Household Glass. Glass Ceram., 2001, 58, 214-215
11. J. Tikkanen, M. Eerola, M. Rajala, Coating Glass by Flame Spraying, J. Non-Cryst. Solids, 178, 1994, p 220-226
12. G. Bolelli, V. Cannillo, L. Lusvarghi, Plasma-Sprayed Glass-Ceramic Coatings on Ceramic Tiles: Microstructure, Chemical Resistance, Mechanical Properties, J. Eur. Cer. Soc. 25(2005) 1835-1853
13. G. Bolelli, L. Lusvarghi, T. Manfredini, C. Siligardi, Influence of the Manufacturing Process on the Crystallization Behaviour of CZS Glass System, J. Non-Cryst. Solids 351 (2005) 2537-2546
14. T. Valente, C. Bartulli, and A. Loreto, Plasma Sprayed Nanostructured Glass Ceramic Matrix Composite Coatings from the CaO-SiO2-ZrO2 Eutectic System, ITSC 2004, Osaka, 10-12/05/2004
15. S.H. Leigh, C. Berndt, Quantitative Evaluation of Void Distributions Within a Plasma-Sprayed Ceramic, J. Am. Ceram. 82 17-21 (1999)
16. S. Deshpande, A. Kulkarni, S. Sampath, H. Herman, Application of Image Analysis for Characterization of Porosity in Thermal Spray Coatings and Correlation with Small Angle Neutron Scattering, Surf. Coat. Technol. 187 (2004) 6-16
17. A. Refke, D. Hawley, J. Doesburg, and R.K. Schmid, LPPS Thin Film Technology for the Application of TBC Systems, ITSC 2005, E. Lugscheider, Ed., May 2-4, 2005, Basel, Switzerland, 6 pages
18. V.S. Bessmertnyi, N.I. Min'ko, V.N. Glaz, P.S. Dyumina, V.P. Krokhin, M.A. Trubitsin, The Effect of Argon Plasma on Reduction of Variable-Valence Oxides in Synthesis of Minerals, Glass Ceram., 2004, 61(1-2), p 63-64
19. S. Dallaire, B. Arsenault, A. De Santis, Investigation of Plasma Sprayed Coatings for Bonding Glass to Metal in Hermetic Seal Applications, Surf. Coat. Technol., 53 (1992) 129-135
20. G. Bolelli, L. Lusvarghi, T. Manfredini, C. Siligardi, Influence of the Manufacturing Process on the Crystallization Behaviour of CZS Glass System, J. Non-Cryst. Solids 351 (2005) 2537-2546
21. G. Bayrak, S. Yilmaz, Crystallization Kinetics of Plasma Sprayed Basalt Coatings, Ceram. Int. 32 (2006) 441-446
22. G. Bolelli, V. Canillo, L. Lusvarghi, T. Manfredini, Glass-Alumina Composite Coatings by Plasma Spraying. Part I: Microstructural and Mechanical Characterization, Surf. Coat. Technol. 201 (2006) 458-473
23. G. Bolelli, V. Canillo, L. Lusvarghi, T. Manfredini, M. Montorsi, Glass-Alumina Composite Coatings by Plasma Spraying. Part II: Microstructure-Based Modeling of Mechanical Properties, Surf. Coat. Technol. 201 (2006) 474-486
24. V. Cannillo, T. Manfredini, M. Montorsi, C. Siligardi, A. Sola, Microstructure-Based Modelling and Experimental Investigation of Crack Propagation in Glass-Alumina Functionally Graded Materials, J. Eur. Cer. Soc. (2006) 26, 3067-3073
25. H. Zhang, X.Y. Wang, L.L. Zheng, X.Y. Jiang, Studies of Splat Morphology and Rapid Solidification During Thermal Spraying, Int. J. Heat Mass Trans. 44 (2001) 4579-4592
26. D.R. Lide, Ed., CRC Handbook of Chemistry and Physics, CRC press, London, 1995, p 12-182
27. P. Fauchais, M. Fukumoto, A. Vardelle, M. Vardelle, Knowledge Concerning Splat Formation: An Invited Review, JTST, 13(3) 2004 337-357
28. C.J. Li, H. Liao, P. Gougeon, G. Montavon, C. Coddet, Experimental Determination of the Relationship Between Flattening Degree and Reynolds Number for Spray Molten Droplets, Surf. Coat. Technol. 191 (2005) 375-383
29. K. Shinoda, T. Koseki, and T. Yoshida, Influence of Impact Parameters of Zirconia Droplets on Splat Formation and Morphology in Plasma Spraying, J. Appl. Phys., 2006, 100(7), Art. No. 074903
30. C. Escure, "Impact Study of Liquid Alumina Droplets onto a Hot Substrate or a Liquid Alumina Film," Ph.D. Thesis, Université de Limoges, November 2000, 55-2000 (in french)
31. G.J. Browning, G.W. Bryant, H.J. Hurst, J.A. Lucas, T.F. Wall, An Empirical Method for the Prediction of Coal Ash Slag Viscosity, Energy Fuels 2003, 17, 731-737
32. M. Vardelle, A. Vardelle, A.C. Léger, and P. Fauchais, Dynamics of Splat Formation and Solidification in Thermal Spraying Processes, Proceedings of the 7th NTSC, 20-24/06/1994, Boston, MS, p 555-562
33. C. Kang, H. Ng, Splat Morphology and Spreading Behavior due to Oblique Impact of Droplets onto Substrates in Plasma Spray Coating Process, Surf. Coat. Technol. 200 (2006) 5462-5477
34. K. Shinoda, Y. Kojima, T. Yoshida, In Situ Measurement System for Deformation and Solidification Phenomena of Yttria-Stabilized Zirconia Droplets Impinging on Quartz Glass Substrate Under Plasma Spraying Conditions, J. Therm. Spray Technol., 2005, 14(4), p 511-517
35. T. Lakatos, Viscosity-Temperature Relations in Glasses Composed of SiO2-Al2O3-Na2O-K2O-Li2O-CaO-MgO-BaO-ZnO-PbO-B2O3, Glastecknisk Tidskrift, 31 (1976) 3, 51-54
36. T. Lakatos, The Effect of Some Glass Components on the Viscosity of Glass, Glastecknisk Tidskrift, 27 (1972) 2, 25-28
37. E. Tillotson, On the Surface Tension of Silicate and Borosilicate Glasses, J. Ind. Eng. Chem., 1912, 4(9) 651-652
38. A.G. Clare, D. Wing, L.E. Jones, A. Kucuk, Density and Surface Tension of Borate Containing Silicate Glass Melts, Glass Technol. - Eur. J. Glass Sci. Technol. Part A, 44(2), 2003, 59-62
39. X. Shi, Q. Wang, X. Niu, C. Li, K. Lu, An Examination of Surface Tension of Binary Lithium Borate Melts as a Function of Composition and Temperature, JACS, 89(10) 3222-3228 (2006)
40. W.D. Kingery, H. Bowen, D.R. Uhlmann, Introduction to Ceramics, John Wiley & sons, New York, 1960, p 284
41. T. Seward, Modeling of Glass Making Processes for Improved Efficiency: Final Report, DE-FG07-96EE41262, 2003
42. A. Priven, General Method for Calculating the Properties of Oxide Glass Forming Melts from Their Composition and Temperature, Glass Technol., 2004, 45(6) 244-54
43. B. Dussoubs, A. Vardelle, D. Gobin, and P. Fauchais, Solidification and Cooling of a Plasma Sprayed Droplet: Determination of Cooling Velocity, Journée SFT'95, Société Française de Thermique, Limoges, France, p 361-366 (in French)
44. H. Jones, Cooling, Freezing and Substrate Impact of Droplets Formed by Rotary Atomization, J. Phys. D Appl. Phys., 1971, 4, 1657
45. M. Fukumoto, S. Katoh, and I. Okane, Splat Behaviour of Plasma Sprayed Particles on Flat Substrate, Thermal Spraying: Current Status and Future Trends, A. Ohmori, Ed., High Temperature Society of Japan, Kobe, Japan, 1995, vol. 1, p 353-358
46. Z. Liu, R. Reitz, Modelling Fuel Spray Impingement and Heat Transfer Between Spray and Wall in Direct Injection Diesel Engines, Numer. Heat Transfer, Part A, 1995, 28, p 515-529
47. S. Schiaffino, A. Sonin, Molten Droplet Deposition and Solidification at Low Weber Numbers, Phys. Fluids, 9(11) (1997) p 3172-3187
48. X. Jiang, Y. Wan, H. Hermann, S. Sampath, Role of Condensates and Adsorbates on Substrate Surface on Fragmentation of Impinging Molten Droplets During Thermal Spraying, Thin Solid Films 385(2001) 132
49. A. McDonald, M. Lamontagne, C. Moreau, S. Chandra, Impact of Plasma-Sprayed Metal Particles on Hot and Cold Glass Surfaces, Thin Solid Films, 2006, 514(1-2), 212-222
50. L. Li, A. Vaidya, S. Sampath, H. Xiong, L. Zheng, Particle Characterization and Splat Formation of Plasma Sprayed Zirconia, JTST, 2006, 15(1), p 97-105
51. L. Bianchi, "Projection ar plasma d'arc et plasma inductif de dépôts céramiques: Mécanisme de formation de la premièrecouche et relation avec les propriétés mécaniques des dépôts", Ph.D. Thesis, Université de Limoges, January 1995, p 41-1995 (in French)
52. K. Shinoda, A. Yamada, M. Kambara, Y. Kojima, T. Yoshida, Deformation of Alumina Droplets on Micro-Patterned Substrates Under Plasma Spraying Conditions, J. Therm. Spray Technol., 2007, 16(2), p 300-305
53. A. Navrotsky, Thermodynamic Properties of Minerals, Mineral Physics and Crystallography: A Handbook of Physical Constants, American Geophysical Union, Washington, DC, 1995, p 18-28
54. A. Kucuk, A.G. Clare, L.E. Jones, Differences Between the Surface and Bulk of Glass Melts. Part 2. Influence of Redox Ratio on the Surface Properties of Silicate Melts, Phys. Chem. Glasses - Eur. J. Glass Sci. Technol. Part B, 2000, 41(2), p 75-80