Formation of solid splats during thermal spray deposition

Journal of Thermal Spray Technology

Volumn 18, Issue 2, 2009, Pages 148-180

  Chandra, Sanjeev ^a   Fauchais, Pierre ^b  

^a UNIVERSITY OF TORONTO   (Canada)

^b UNIVERSITY OF LIMOGES   (France)

Author keywords

Adhesion of TS coatings; Coating substrate interaction; Influence of spray parameters; Preheating of substrate; Splats cooling; Spray deposition; TS coating process

Indexed keywords

COATING-SUBSTRATE INTERACTION; INFLUENCE OF SPRAY PARAMETERS; SPLATS COOLING; SPRAY DEPOSITION; TS COATING PROCESS;

ADHESION; COOLING; CRYSTALLIZATION; LIQUID FILMS; PHOTOGRAPHY; PREHEATING; SOLIDIFICATION; SPRAYED COATINGS; SURFACE CHEMISTRY; SURFACE TOPOGRAPHY;

SUBSTRATES;

EID: 67349102724     PISSN: 10599630     EISSN: None     Source Type: Journal    
DOI: 10.1007/s11666-009-9294-5     Document Type: Conference Paper

References (117)

1. P. Fauchais, Understanding Plasma Spraying: An Invited Review, J. Phys. D: Applied Phys., 2004, 37, p R86-R108.
2. A. Itoh, K. Takeda, M. Itoh, M. Koga, Pretreatements of substrates by using reversed transferred arc in low pressure plasma spray, in Thermal Spray: Research and Applications, (ed.) T.F. Bernicki (pub.) ASM Int. Materialms Park, OH, USA, (1991) 245-252.
3. S.V. Klinkov and V.F. Kosarev, Measurements of Cold Spray Deposition Efficiency, J. Therm. Spray Technol., 15 (3) (2006) 364-371.
4. M.F. Morks, Y. Tsunekawa, M. Okumiya, and M.A. Shoeib (2002) Splat Morphology and Microstructure of Plasma Sprayed Cast Iron With Different Preheat Substrate Temperatures, J.Therm.Spray Technol., 11(2): 226-232.
5. T. Chraska, A. H. King (2002) Effect of different substrate conditions upon interface with plasma sprayed zirconia - a TEM study, Surface and Coatings Technology 157: 238-246.
6. M. Mellali, A. Grimaud, A.C. Léger, P. Fauchais and J. Lu (1997) Alumina grit blasting parameters for surface preparation in the plasma spraying operation, J. of Thermal Spray Technology 6(2):217-227.
7. F. Bahbou and P. Nylen, Relationship Between Surface Topography Parameters and Adhesion Strength for Plasma Spraying, ITSC 2005, E. Lugscheider, Ed., DVS, Düsseldorf, Germany, e-proceedings, 2005.
8. C.-Jiu Li, J.-L. Li (2004) Evaporated-Gas-Induced Splashing Model for Splat Formation during Plasma Spraying, Surface and Coatings Technology 184: 13-23.
9. P. Fauchais, M. Vardelle, A. Vardelle, L. Bianchi and A.C. Léger (1996) Parameters Controlling the Generation and Properties of Plasma Sprayed Zirconia Coatings, Plasma Chem. Plasma Proc. 16(1):99S-125S.
10. P. Fauchais, M. Fukumoto, A. Vardelle and M. Vardelle (2004) Knowledge concerning splat formation, an invited review, J. of Thermal Spray Technology 13(3): 337-360.
11. T. Haure, "Multifunctional Layers Obtained by a Multi-technique Process," Ph.D Thesis, University of Limoges, France, Nov. 2003.
12. J. Pech, "Preoxidation Generated by Blown arc d.c. Plasma Jets. Relationship Between Surface, Oxidation and Adhesion of Plasma Sprayed Coatings," Ph.D. Thesis, University of Rouen, France, 1999.
13. A.A. Syed, A. Denoirjean, B. Hannoyer, P. Fauchais, P. Denoirjean, A.A. Khan and J.C. Labbe (2005) Influence of substrate surface conditions on the plasma sprayed ceramic and metallic particles flattening, Surf. Coat. Technol. 200: 2317-2331.
14. J. Pech and B. Hannoyer (2000) Influence of the oxide layer by d.c. plasma preheating on the adhesion coating and role of the initial surface pretreatment, Surf. Interface Anal. 30: 585-588.
15. C. Coddet, G. Montavon, S. Ayrault-Costil, O. Freneaux, F. Rigolet, G. Barbezat, F. Foliot, A. Diard and P. Wazen (1999) Surface preparation and thermal spray in a single step: The PROTAL process - example of application for an aluminium-base substrate, J. of Thermal Spray Technology, 8(2): 235-242.
16. S. Costil, H. Liao, A. Gammondi and C. Coddet (2005) Influence of surface laser cleaning combined with substrate preheating on splat morphology, J. of Thermal Spray Technology 14(1):31-38.
17. H. Li, S. Costil, H.-L. Liao and C. Coddet (2006) Role of the laser surface preparation on the adhesion of Ni-5 wt% Al coatings deposited using the PROTAL process, J. of Thermal Spray Technology 15(2): 191-197.
18. H. Li, S. Costil, H.-L. Liao, C.-J. Li, M.P. Planche and C. Coddet (2006) Effect of surface conditions on the flattening behavior of plasma sprayed Cu splats, Surf. Coat. Technol. 200: 5435-5446.
19. H. Li, S. Costil, S.-H. Deng, H.-L. Liao, C. Coddet, V. Ji, and W.-J. Huang, Benefit of Surface Oxide Removal on Thermal Spray Coating Adhesion Using the PROTAL Process, ITSC 2006, B. Marple et al., Ed., ASM International, Materials Park, OH, USA, 2006, e-proceedings
20. M. Fukumoto, H. Nagui, and T. Yasui, Influence of Surface Character Change of Substrate due to Heating on Flattening Behavior of Thermal Sprayed Particles, ITSC 2006, B. Marple et al., Ed., ASM International, Materials Park, OH, USA, 2006, e-proceedings
21. H. Li, Y. Danlos, S. Costil, and C. Coddet, Influence of Laser Induced Surface Topography on the Surface Static Wettability in Protal ®, Thermal Spray (2007), Global Coating Solutions, B. Marple et al., Ed., ASM International, Materials Park, OH, USA, e.proceedings, 2007, p 1070-1074.
22. S. Valette, "Influence of the Preoxidation of a Steel Substrate on the Adhesion of an Alumina Coating Plasma Sprayed," Ph.D. Thesis, University of Limoges, France, Nov. 2004.
23. J. Pech, B. Hannoyer, O. Lagnoux, A. Denoirjean, and P. Fauchais, Influence of the Preheating Parameters on the Plasma Jet Oxidation of a Low Carbon Steel, Progress in Plasma Processing of Materials, P. Fauchais and J. Amouroux, Ed., Begell House, NY, 1999, p 543-551
24. M. Fukumoto, I. Ohgitani, H. Nagai, and T. Yasni, Effect of Substrate Surface Change by Heating on Flattening Behavior of Thermal Sprayed Particles, ITSC 2005, E. Lugscheider, Ed., DVS, Düsseldorf, Germany, e-proceedings, 2005.
25. J. Cedelle, M. Vardelle and P. Fauchais (2006) Influence of stainless steel substrate preheating on surface topography and on millimeter- and micrometer-sized splat formation, Surface and Coatings Technol. 201: 1373-1382.
26. A. McDonald, C. Moreau, S. Chandra (2007) Effect of substrate oxidation on spreading of plasma-sprayed nickel on stainless steel, Surface & Coatings Technology 202: 23-33.
27. V.E. Henrich, P.A. Cox (1994) The Surface Science of Metal Oxides, Cambridge University Press, Cambridge, New York.
28. M. Fukumoto, T. Yamaguchi, M. Yamada, and T. Yasui (2007) Splash Splat to Disk Splat Transition Behavior in Plasma-Sprayed Metallic Materials, J. Therm. Spray Technol. 16 (5-6):905-912.
29. K. Shinoda, H. Murakami, S. Kuroda, S. Oki, K. Takehara, and T.G. Etoch, High Speed Thermal Imaging of Yttria-Stabilized Zirconia Droplets Impinging on a Substrate in Plasma Spraying, ISPC, 18th ed., K. Tachibana, O. Takai, K. Ono, and T. Shirafuji, Eds., http:// plasma.kuee.kyoto-u.ac.jp/ispc18/.
30. K. Shinoda, Y. Kojima and T. Yoshida (2005) In situ measurement system for deformation and solidification phenomena of yttria stabilized zirconia droplets impinging on quartz glass substrate under plasma spraying conditions, J. of Thermal Spray Technology 14(4):511-517.
31. T. Sakuta and M. Boulos (1988) Novel approach for particle velocity and size measurement under plasma conditions, Rev. Sci. Instrum. 59(2): 285-291.
32. S.Q. Armster, J.P. Delplanque, M. Rein and E.J. Lavernia (2002) Thermo-fluid mechanisms controlling droplet based material processes, Int. Materials Reviews 47(6): 265-304.
33. C. Escure, M. Vardelle and P. Fauchais (2003) Experimental and theoretical study of the impact of alumina droplet on cold and hot substrates, Plasma Chem. Plasma Proc. 23(2): 185-221.
34. J. Cedelle, M. Vardelle, B. Pateyron, P. Fauchais (2005) Investigation of Plasma Sprayed Coatings Formation by Visualization of Droplet Impact and Splashing on a Smooth Substrate. (2005). IEEE Transactions on Plasma Science 33: 414-415.
35. J. Cedelle, "Study of Splat Formation Resulting from the Impact of Millimetre- and Micrometer-Sized Droplets: Application to Coating Formation by Plasma Spraying," Ph.D. Thesis, University of Limoges, France, Oct. 2005.
36. N.Z. Mehdizadeh, M. Lamontagne, C. Moreau, S. Chandra and J. Mostaghimi (2005) Photographing impact of molten molybdenum particles in a plasma spray, J. of Thermal Spray Technology 14: 354-361.
37. A. McDonald, M. Lamontagne, C. Moreau and S. Chandra (2006) Impact of plasma-sprayed metal particles on hot and cold glass surfaces, Thin Solid Films. 514: 212-222.
38. A. McDonald, M. Lamontagne, S. Chandra and C. Moreau (2006) Photographing impact of plasma sprayed particles on metal substrates, J. of Thermal Spray Technology 15: 708-716.
39. L. Bianchi, A.-C. Leger, M. Vardelle, A. Vardelle and P. Fauchais (1997) Splat formation and cooling of plasma sprayed Zirconia, Thin Solid Films., 305: 35-47.
40. A. McDonald, C. Moreau and S. Chandra (2007) Thermal contact resistance between plasma-sprayed particles and flat surfaces, Int. J. Heat Mass Transfer 50: 1737-1749.
41. Y. Heichal and S. Chandra (2005) Predicting Thermal Contact Resistance between Molten Metal Droplets and a Solid Surface, J. of Heat Transfer 127: 1269-1275.
42. R. Dhiman and S. Chandra (2005) Freezing-induced splashing during impact of molten metal droplets with high Weber numbers, Int. J. Heat Mass Transfer 48: 5625-5638.
43. A. Abedini, A. Pourmousa, S. Chandra and J. Mostaghimi (2006) Effect of substrate temperature on the properties of coatings and splats deposited by wire arc spring, Surface and Coatings Technol. 201: 3350-3358.
44. F. Gärtner, T. Stoltenhoff, T. Schmidt, and H. Kreye (2006) The Cold Spray Process andIts Potential for Industrial Applications, Journal of Thermal Spray Technology, 15: 223-232.
45. S.V. Klinkov and V.F. Kosarev (2006) Measurements of Cold Spray Deposition Efficiency, Journal of Thermal Spray Technology, 15: 364-371.
46. W. Trompetter, M. Hyland, D. McGrouther, P. Munroe, and A. Markwitz (2006) Effect of Substrate Hardness on Splat Morphology in High-Velocity Thermal Spray Coatings, J. of Thermal Spray Technology 15 (4):663-669.
47. J. Madejski (1976) Solidification of Droplet on a Cold Substrate, Int. J. Heat Mass Transfer 19: 1009-1013.
48. H. Jones (1971) Cooling, freezing and substrate impact of droplets formed by rotary atomization, J. Phys. D: Appl. Phys. 4: 1657-1660.
49. C.W. Kang, H.W. Ng (2006) Splat morphology and spreading behavior due to oblique impact of droplets onto substrates in plasma spray coating process, Surface & Coatings Technology 200: 5462-5477.
50. A. Vardelle, M. Vardelle, P. Fauchais and D. Gobin (1995) Monitoring particle impact on a substrate during plasma spray process, NATO Series E: Applied Sciences, 282: 95-121.
51. S. Amada, K. Tomoyasu and M. Haruyama (1997) Splat Formation of Molten Sn, Cu and Ni Droplets, Surface and Coatings Technology 96: 176-183.
52. S. Amada, M. Haruyama, T. Ohyagi (2001) Kazuyuki Tomoyasu, Wettability effect on the flattening ratio of molten metal droplets, Surface and Coatings Technology 138: 211-219.
53. C. -J. Li, H.-L. Liao, P. Gougeon, G. Montavon, C. Coddet (2005) Experimental determination of the relationship between flattening degree and Reynolds number for spray molten droplets, Surface & Coatings Technology 191: 375-383.
54. M. Pasandideh-Fard, R. Bhola, S. Chandra and J. Mostaghimi (1998) Deposition of tin droplets on a steel plate: Simulations and experiments, International Journal of Heat and Mass Transfer 41: 2929-2945.
55. V.V. Sobolev and J.M. Guilemany (1999) Effect of Oxidation on Droplet Flattening and Splat-Substrate Interaction in Thermal Spraying, J. of Thermal Spray Technology 8: 523-530.
56. S. Deshpande, T, S. Sampath, H. Zhang (2006) Mechanisms of oxidation and its role in microstructural evolution of metallic thermal spray coatings - Case study for Ni-Al, Surface & Coatings Technology 200: 5395-5406.
57. M.P. Planche, H. Liao, C. Coddet (2007) Oxidation control in atmospheric plasma spraying coating, Surface & Coatings Technology 202: 69-76.
58. M. Fukumoto, H. Nagai, and T. Yasui (2006) Influence of Surface Character Change of Substrate Due to Heating on Flattening Behavior of Thermal Sprayed Particles, J. of Thermal Spray Technology 15(4) 759-764.
59. M. Fukumoto, H. Hayashi, and T. Yokoyama (1995) Relationship Between Particle_s Splat Pattern and Coating Adhesive Strength of HVOF Sprayed Cu-Alloy, J. Japan Therm. Spray Soc., in Japanese, 32(3): 149-156.
60. Y. Tanaka, M. Fukumoto (1999) Investigation of dominating factors on flattening behavior of plasma sprayed ceramic particles, Surface and Coatings Technology 120-121: 124-130.
61. M. Fukumoto, E. Nishioka, T. Matsubara, Flattening and solidification behavior of a metal droplet on a flat substrate surface held at various temperatures, Surface and Coatings Technology 120-121 (1999) 131-137.
62. H.R. Salimijazi, L. Pershin, T.W. Coyle, J. Mostaghimi, S. Chandra, Y.C. Lau, L. Rosenzweig, and E. Moran (2007) Effect of Droplet Characteristics and Substrate Surface Topography on the Final Morphology of Plasma-Sprayed Zirconia Single Splats, J. of Thermal Spray Technology 16(2): 291-299.
63. M.F. Bahbou and P. Nyle'n (2007) On-Line Measurement of Plasma-Sprayed Ni-Particles during Impact on a Ti-Surface: Influence of Surface Oxidation, J. of Thermal Spray Technology 16(4): 506-511.
64. L. Li, A. Vaidya, S. Sampath, H. Xiong, and L. Zheng (2006) Particle Characterization and Splat Formation of Plasma Sprayed Zirconia, J. of Thermal Spray Technology 15: 97-105.
65. M. Fukumoto and Y. Huang (1999) Flattening Mechanism in Thermal Sprayed Nickel Particle Impinging on Flat Substrate Surface, J. of Thermal Spray Technology 8(3): 427-432.
66. H. Li, K.A. Khor, and P. Cheang (2006) Effect of Steam Treatment During Plasma Spraying on the Microstructure of Hydroxyapatite Splats and Coatings, J. of Thermal Spray Technology 15(4): 610-616.
67. M.F. Morks, Y. Tsunekawa, M. Okumiya, and M.A. Shoeib (2003) Splat Microstructure of Plasma Sprayed Cast Iron With Different Chamber Pressures, J. of Thermal Spray Technology 12(2): 282-289.
68. C.-J. Li, C.-X. Li, G.-J. Yang, and Y.-X. Wang, Examination of Substrate Surface Melting-Induced Splashing During Splat Formation in Plasma Spraying, ITSC 2006 Proceedings, B. Marple et al., Ed., ASM International, Materials Park, OH, USA, e-proceedings, 2006.
69. A. Denoirjean, A. Grimaud, P. Fauchais, P. Tristant, C. Tixier, and J. Desmaison: "Splat Formation, First Step for Multitechnique Deposition of Plasma Spraying and Microwave Plasma Enhanced CVD," in Thermal Spray: Meeting in Challenges of the 21st Century, Vol. 2, C. Coddet, ed., ASM International, Materials Park, OH, 1998, pp. 1369-1374.
70. A. Maitre, A. Denoirjean, P. Fauchais, P. Lefort (2002) Plasma-jet coating of pre-oxidized XC38 steel: Influence of the nature of the oxide layer, Physical Chemistry Chemical Physics, 4(15): 3887-3893.
71. S. Valette, A. Denoirjean, R. Danoix, B. Hannoyer, B. Lefez, J. Lopitaux, P. Lefort, and P. Fauchais, Interaction Between a Thin Non Continuous d.c. Plasma Sprayed Alumina Layer and Pre-oxidized Low Carbon Substrate, ITSC 2005, E. Lugsheider et al., Ed., DVS Düsseldorf, Germany, e-proceedings, 2005.
72. T. Haure, A. Denoirjean, P. Tristant, J. Desmaison, P. Fauchais, A. Ma®tre, Interconnected Porosity of Plasma Sprayed Alumina Coatings: Evaluation and Modification, in Thermal Spray 2003: Advancing the Science & Applying the Technology, (Ed.) C. Moreau and B. Marple (Pub.) ASM International, Materials Park, Ohio, USA, (2003).
73. L. Bianchi, A. Denoirjean, F. Blein, and P. Fauchais (1987) "Micro-structural Investigation of Plasma Sprayed Ceramic Splats," Thin Solid Films, 299: 125-135.
74. M. Bussmann, S. Chandra and J. Mostaghimi: "Numerical Results of Off-Angle Thermal Spray Particle Impact," in ITSC99 Proc., (E. Lugscheider and P. Kammer (pub.) DVS, Düsseldorf, Germany, (1999) 783-186.
75. G. Montavon, S. Sampath, C.C. Berndt, H. Herman, C. Coddet (1997) Effects of the spray angle on splat morphology During thermal spraying, Surface and Coatings Technology 91: 107-115.
76. H.R. Salimijazi, L. Pershin, T.W. Coyle, J. Mostaghimi, S. Chandra, Y.C. Lau, L. Rosenzweig, and E. Moran (2007) Effect of Droplet Characteristics and Substrate Surface Topography on the Final Morphology of Plasma-Sprayed Zirconia Single Splats, J. of Thermal Spray Technology 16(2): 291-299.
77. J.M. Houben, Future Development in Thermal Spraying, Proceedings of 2nd National Conference on Thermal Spray, 1984, p 1-19.
78. N.Z. Mehdizadeh, S. Chandra, and J. Mostaghimi: "Effect of Substrate Temperature and Roughness on Coating Formation," in Proc. ITSC 2002 (ed.) E. Lugscheider (pub.) DVS, Düsseldorf, Germany, 2002, pp. 830-837.
79. K. Shinoda, A. Yamada, M. Kambara, Y. Kojima, and T. Yoshida (2007) Deformation of Alumina Droplets on Micro-Patterned Substrates Under Plasma Spraying Conditions, J. of Thermal Spray Technology 16(2): 300-305.
80. C. Robert, A. Vardelle, D. Gobin and P. Fauchais (1998) Modelling of rapid solidification in plasma spray deposition, J. of High Temperature Materials Processes 2: 225-238.
81. H. Zhang, X.Y. Wang, L.L. Zheng, S. Sampath (2004) Numerical simulation of nucleation, solidification, and microstructure formation in thermal spraying, International Journal of Heat and Mass Transfer 47: 2191-2203.
82. C. Robert, A. Denoirjean, A. Vardelle, G.X. Wang and S. Sampath, Nucleation and phase selection in plasma sprayed alumina: Modelling and experiment, in Thermal Spray: Meeting the Challenges of the 21st century, (ed.) C. Coddet, (pub.) ASM Int. Materials Park, OH, USA (1998) 767-772.
83. A. Denoirjean, A. Grimaud, P. Fauchais, P. Tristant, C. Tixier and J. Demaison, Splat formation, first step for multi-technique deposition of plasma spraying and microwave plasma enhanced CVD, in Thermal Spray: Meeting the Challenges of the 21st Century (ed.) C. Coddet (pub.) ASM Int. Materials Park, OH, USA, 1 (1998) 1369-1374.
84. S. Valette, A. Denoirjean, B. Ssoulestin, G. Trolliard, B. Hannoyer, P. Lefort, and P. Fauchais, Alumina Coatings on Preoxidized Low Carbon Steel. Interfacial Phenomena Between Alumina and Iron Oxide Layer, Proceedings of ITSC2004, Osaka J., Ed., May 2004, DVS, Düsseldorf, Germany, 2004
85. V. Mehdi-Nejad, J. Mostaghimi, and S. Chandra (2003) Air bubble entrapment under an impacting droplet, Physics of Fluids 15, 173-183.
86. M. Pasandideh-Fard, Y. M. Qiao, S. Chandra and J. Mostaghimi (1996) Capillary effects During droplet impact on a solid surface, Physics of Fluids 8, 650-659.
87. N. Z. Mehdizadeh, S. Chandra, and J. Mostaghimi (2004) Formation of fingers around the edges of a drop hitting a metal plate with high velocity, Journal of Fluid Mechanics, 510: 353-373.
88. R. Rioboo, M. Marengo, C. Tropea (2002) Time evolution of liquid drop impact onto solid, dry surfaces, Experiments in Fluids 33: 112-124.
89. A. M. Worthington (1907) The Splash of a Drop, The Society for Promoting Christian Knowledge, London.
90. M. Bussmann, J. Mostaghimi and S. Chandra (1999) On a three-dimensional volume tracking model of droplet impact, Physics of Fluids 11: 1406-1417.
91. M. Bussmann, S. Chandra and J. Mostaghimi (2000) Modeling the splashing of a droplet impacting a solid surface, Physics of Fluids 12: 3121-3132.
92. C. Mundo, M. Sommerfeld, C. Tropea (1995) Droplet -wall collisions: Experimental studies of the deformation and break-up process, Int. J. Multiphase Flow 21: 151-173.
93. M. Fukumoto, E. Nishioka, T. Nishiyama (2002) New criterion for splashing in flattening of thermal sprayed particles onto flat substrate surface, Surface and Coatings Technology 161: 103-110.
94. Z. Zhao, D. Poulikakos and J. Fukai (1996) Heat Transfer and Fluid Dynamics During the Collision of a Liquid Droplet on a Substrate-I. Modeling, Int. J. of Heat Mass Transfer, 39: 2771-2789.
95. Z. Zhao, D. Poulikakos and J. Fukai (1996) Heat Transfer and Fluid Dynamics During the Collision of a Liquid Droplet on a Substrate-II. Experiments, Int. J. Heat Mass Transfer, 39: 2791-2802.
96. Liu, H., Lavernia, E. J. Rangel (1993) R. H. Numerical simulation of substrate impact and freezing of droplets in plasma spray processes. Journal of Physics D: Applied Physics, 26: 1900-1908.
97. M. Bertagnolli, M. Marchese, G. Jacucci, I. St. Doltsinis and S. Noelting (1997) Thermo-mechanical simulation of the splashing of ceramic droplets on a rigid substrate. J. Comput. Phys. 133: 205.
98. G. Trapaga, E.F. Matthys, J.J. Valencia, and J. Szekely (1992) Fluid flow, heat transfer and solidification of molten metal droplets impinging on substrates:cOmparison of numerical and experimental results. Metallurgical Transactions B 23B: 701-718.
99. M. Pasandideh-Fard and J. Mostaghimi (1996) On the Spreading and Solidification of Molten Particles in a Plasma Spray Process: Effect of Thermal Contact Resistance, Plasma Chem. Plasma Process, 16S: 83S-98S.
100. D.B. Kothe, R.C. Mjolsness, and M.D. Torrey, "RIPPLE: A Computer Program for Incompressible Flows with Free Surfaces,"' Technical Report, LA-12007-MS, Los Alamos National Laboratory, 1991.
101. D.L. Youngs, "An Interface Tracking Method for a 3D Eulerian Hydrodynamics Code," Technical Report 44/92/35, AWRE, 1984.
102. Y. Cao, A. Faghri and W. S. Chang (1989) A Numerical Analysis of Stefan Problems for Generalized Multi-Dimensional Phase-Change Structures Using the Enthalpy Transforming Model, Int, J, of Heat Mass Transfer, 32: 1289-1298.
103. M. Pasandideh-Fard, V. Pershin, S. Chandra and J. Mostaghimi (2002) Splat shapes in a thermal spray coating process: Simulations and experiments, Journal of Thermal Spray Technology 11: 206-217.
104. X.Y. Wang, H. Zhang, L.L. Zheng, S. Sampath (2002) An integrated model for interaction between melt flow and non-equilibrium solidification in thermal spraying, International Journal of Heat and Mass Transfer 45 2289-2301.
105. Y. P. Wan, H. Zhang, X. Y. Jiang, S. Sampath, V. Prasad (2001) Role of Solidification, Substrate Temperature and Reynolds Number on Droplet Spreading in Thermal Spray Deposition: Measurements and Modeling, Journal of Heat Transfer 123: 382-389.
106. M. Ivosevic, R. A. Cairncross, R. Knight (2006) 3D predictions of thermally sprayed polymer splats: Modeling particle acceleration, heating and deformation on impact with a flat substrate, International Journal of Heat and Mass Transfer 49: 3285-3297.
107. C.-J. Li and J.-L. Li (2004) Transient Contact Pressure During Flattening of Thermal Spray Droplet and Its Effect on Splat Formation, Journal of Thermal Spray Technology 13: 2004-229.
108. M. Xue, S. Chandra, J. Mostaghimi, H. R. Salimijazi (2007) Formation of Pores in Thermal Spray Coatings due to Incomplete Filling of Crevices in Patterned Surfaces, Plasma Chem. Plasma Process, 27: 647-657.
109. M. Xue, S. Chandra, J. Mostaghimi (2006) Investigation of Splat Curling up in Thermal Spray Coatings, Journal of Thermal Spray Technology 15: 531-536.
110. M. Raessi, J. Mostaghimi, M. Bussmann (2006) Effect of surface roughness on splat shapes in the plasma spray coating process, Thin Solid Films 506-507: 133-135.
111. H.B. Parizi, L. Rosenzweig, J. Mostaghimi, S. Chandra, T. Coyle, H. Salimi, L. Pershin, A. McDonald, and C. Moreau (2007) Numerical Simulation of Droplet Impact on Patterned Surfaces, Journal of Thermal Spray Technology 16: 713-721.
112. McDonald, M. Xue, S. Chandra, J. Mostaghimi, and C. Moreau (2007) Modeling fragmentation of plasma-sprayed particles impacting on a solid surface at room temperature, C. R. Mecanique 335: 351-356.
113. N. Dombrowski, R. Fraser (1954) A photographic investigation into the disintegration of liquid sheets, Trans. Royal Soc. London A 247: 101-130.
114. J. F. Padday (1970) Cohesive properties of thin films of liquids adhering to a solid surface, Spec. Discuss. Faraday Soc., 1: 64-74.
115. A. Sharma and E. Ruckenstein (1989) Dewetting of solids by the formation of holes in macroscopic liquid films, J. Colloid Interface Sci., 133: 358-368.
116. R. Dhiman, "Splashing and Breakup of Droplets Impacting on a Solid Surface," Ph.D. Thesis, University of Toronto, Toronto, Canada, 2008.
117. R. Dhiman, A. McDonald, S. Chandra (2007) Predicting Splat Morphology in a Thermal Spray Process, Surface and Coatings Technology 201: 7789-8801.