Design, analysis, and prototyping of a novel-structured solid-rotor-ringed line-start axial-flux permanent-magnet motor

IEEE Transactions on Industrial Electronics

Volumn 61, Issue 4, 2014, Pages 1722-1734

  Mahmoudi, Amin ^a   Kahourzade, Solmaz ^a   Rahim, Nasrudin Abd ^a   Hew, Wooi Ping ^a   Uddin, Mohammad Nasir ^b  

^a UNIVERSITY OF MALAYA   (Malaysia)

^b LAKEHEAD UNIVERSITY   (Canada)

Author keywords

Axial flux permanent magnet motor (AFPM); finite element analysis (FEA); line start; solid rotor

Indexed keywords

DESIGN; FINITE ELEMENT METHOD; LARGE SCALE SYSTEMS; POLES; SYNCHRONOUS MOTORS; TORQUE MOTORS;

AFPM SYNCHRONOUS MOTORS; AXIAL-FLUX PERMANENT-MAGNET MOTORS; HIGH STARTING TORQUE; HIGH TORQUE DENSITY; LINE START; PRELIMINARY DESIGN; SOLID ROTOR; TRANSIENT PERFORMANCE;

ROTORS (WINDINGS);

EID: 84887303810     PISSN: 02780046     EISSN: None     Source Type: Journal    
DOI: 10.1109/TIE.2013.2266082     Document Type: Article

References (32)

1. W. Fei, P. Luk, J. Ma, J. X. Shen, and G. Yang, "A high-performance line-start permanent magnet synchronous motor amended from a small industrial three-phase induction motor," IEEE Trans. Magn., vol. 45, no. 10, pp. 4724-4727, Oct. 2009.
2. A. M. Knight and C. I. McClay, "The design of high-efficiency linestart motors," IEEE Trans. Ind. Appl., vol. 36, no. 6, pp. 1555-1562, Nov./Dec. 2000.
3. A. D. Aliabad, M. Mirsalim, and N. F. Ershad, "Line-start permanentmagnet motors: Significant improvements in starting torque, synchronization, and steady-state performance," IEEE Trans. Magn., vol. 46, no. 12, pp. 4066-4072, Dec. 2010.
4. A. Mahmoudi, N. A. Rahim, and W. P. Hew, "Axial-flux permanentmagnet motor design for electric vehicle direct drive using sizing equation and finite element analysis," Progr. Electromagn. Res. (PIER), vol. 122, pp. 467-496, Jan. 2012.
5. R. Di Stefano and F. Marignetti, "Electromagnetic analysis of axialflux permanent magnet synchronous machines with fractional windings with experimental validation," IEEE Trans. Ind. Electron., vol. 59, no. 6, pp. 2573-2582, Jun. 2012.
6. Q. D. Nguyen and S. Ueno, "Analysis and control of nonsalient permanent magnet axial gap self-bearing motor," IEEE Trans. Ind. Electron., vol. 58, no. 7, pp. 2644-2652, Jul. 2011.
7. G. De Donato, F. G. Capponi, and F. Caricchi, "No-load performance of axial flux permanent magnetmachines mountingmagnetic wedges," IEEE Trans. Ind. Electron., vol. 59, no. 10, pp. 3768-3779, Oct. 2012.
8. T. D. Nguyen, K. J. Tseng, S. Zhang, and H. T. Nguyen, "A novel axial flux permanent-magnet machine for flywheel energy storage system: Design and analysis," IEEE Trans. Ind. Electron., vol. 58, no. 9, pp. 3784-3794, Sep. 2011.
9. A. Di Gerlando, G. Foglia, M. F. Iacchetti, and R. Perini, "Axial flux PM machines with concentrated armature windings: Design analysis and test validation of wind energy generators," IEEE Trans. Ind. Electron., vol. 58, no. 9, pp. 3795-3805, Sep. 2011.
10. T. Ding, N. Takorabet, F. M. Sargos, and X. Wang, "Design and analysis of different line-start PM synchronous motors for oil-pump applications," IEEE Trans. Magn., vol. 45, no. 3, pp. 1816-1819, Mar. 2009.
11. B. T. Kim and B. I. Kwon, "Influence of space harmonics on starting performance of a single-phase line start permanent-magnet motor," IEEE Trans. Magn., vol. 44, no. 22, pp. 4668-4672, Dec. 2008.
12. T. Marcic, B. Stumberger, G. Stumberger, M. Hadziselimovic, P. Virtic, and D. Dolinar, "Line-starting three-and single-phase interior permanent magnet synchronous motors-direct comparison to induction motors," IEEE Trans. Magn., vol. 44, no. 11, pp. 4413-4416, Nov. 2008.
13. E. Peralta-Sánchez and A. Smith, "Line-start permanent-magnet machines using a canned rotor," IEEE Trans. Ind. Appl., vol. 45, no. 3, pp. 903-910, May/Jun. 2009.
14. A. H. Isfahani and S. Vaez-Zadeh, "Effects of magnetizing inductance on start-up and synchronization of line-start permanent-magnet synchronous motors," IEEE Trans. Magn., vol. 47, no. 4, pp. 823-829, Apr. 2011.
15. E. Peralta-Sanchez, A. C. Smith, and J. J. Rodriguez-Rivas, "Steady-state analysis of a canned line-start PM motor," IEEE Trans. Magn., vol. 47, no. 10, pp. 4080-4083, Oct. 2011.
16. L. Byeong-Hwa, H. Jung-Pyo, and L. Jung-Ho, "Optimum design criteria for maximum torque and efficiency of a line-start permanent-magnet motor using response surface methodology and finite element method," IEEE Trans. Magn., vol. 48, no. 2, pp. 863-866, Feb. 2012.
17. M. A. Rahman, A. M. Osheiba, K. Kurihara, M. A. Jabbar, W. P. Hew, W. Kai, and H. M. Zubayer, "Advances on single-phase line-start high efficiency interior permanent magnet motors," IEEE Trans. Ind. Electron., vol. 59, no. 3, pp. 1333-1345, Mar. 2012.
18. A. D. Aliabad and M. Mirsalim, "Analytic modelling and dynamic analysis of pole-changing line-start permanent-magnet motors," IET Elect. Power Appl., vol. 6, no. 3, pp. 149-155, Mar. 2012.
19. S. W. Baek and B. I. Kwon, "Optimum design of a single-phase line-start PM motor considering efficiency, maximum torque, and starting torque," IEEE Trans. Magn., vol. 48, no. 12, pp. 4850-4859, Dec. 2012.
20. S. W. Baek, B. I. Kim, and B. I. Kwon, "Practical optimum design based on magnetic balance and copper loss minimization for a single-phase line start PM motor," IEEE Trans. Magn., vol. 47, no. 10, pp. 3008-3011, Oct. 2011.
21. M. Sarma, "Current-density distribution in solid-rotor induction motor," IEEE Trans. Magn., vol. MAG-15, no. 6, pp. 1473-1475, Nov. 1979. (Pubitemid 11485062)
22. M. S. Sarma and G. R. Soni, "Solid-rotor and composite-rotor induction machines," IEEE Trans. Aerosp. Electron. Syst., vol. AES-8, no. 2, pp. 147-155, Mar. 1972.
23. J. C. Wilson, E. A. Erdelyi, and R. E. Hopkins, "Aerospace compositerotor induction motors," IEEE Trans. Aerosp., vol. AS-3, no. 2, pp. 18-23, Jun. 1965.
24. J. F. Gieras, R. Wang, and M. J. Kamper, Axial Flux Permanent Magnet Brushless Machines, 2nd ed. New York, NY, USA: Springer-Verlag, 2008.
25. F. Giulii Capponi, G. De Donato, and F. Caricchi, "Recent advances in axial-flux permanent-magnet machine technology," IEEE Trans. Ind. Appl., vol. 48, no. 6, pp. 2190-2205, Nov./Dec. 2012.
26. A. Mahmoudi, S. Kahourzade, N. A. Rahim, and H. W. Ping, "Improvement to performance of solid-rotor-ringed line-start axial-flux permanentmagnet motor," Progr. Electromagn. Res. (PIER), vol. 124, pp. 383-404, Apr. 2012.
27. G. Müller, K. Vogt, and B. Ponick, Berechnung Elektrischer Maschinen. Weinheim, Germany: Wiley, 2008.
28. K. Vogt and G. Muller, Elektrische Maschinen Berechnung Rotierender Elektrischer Maschinen. Berlin, Germany: Veb Verlag Technik, 1988.
29. R. Richter and R. Brüderlink, Elektrische Maschinen: Die Induktionsmachinen. Basel, Switzerland: Birkhäuser, 1954.
30. C. M. Ong, Dynamic Simulation of Electric Machinery: Using MATLAB/Simulink. Englewood Cliffs, NJ, USA: Prentice-Hall, 1998.
31. Opera Version 14.0 User Guide, Vector Fields, Cobham, Dorset, U.K., 2011.
32. A. Hassanpour Isfahani and S. Vaez-Zadeh, "Line start permanent magnet synchronous motors: Challenges and opportunities," Energy, vol. 34, no. 11, pp. 1755-1763, Nov. 2009.